Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems
The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Abstract
Power electronics plays an important role in a wide range of applications in order to achieve high efficiency and performance. Increasing efforts are being made to improve the reliability of power electronics systems to ensure compliance with more stringent constraints on cost, safety, and availability in different applications. This paper presents an overview of the major failure mechanisms of IGBT modules and their handling methods in power converter systems improving reliability. The major failure mechanisms of IGBT modules are presented first, and methods for predicting lifetime and estimating the junction temperature of IGBT modules are then discussed. Subsequently, different methods for detecting open- and short-circuit faults are presented. Finally, fault-tolerant strategies for improving the reliability of power electronic systems under field operation are explained and compared in terms of performance and cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey
Carrasco, J. M., Franquelo, L. G., Bialasiewicz, J. T., Galvan, E., PortilloGuisado, R. C., Prats, M. A. M., Leon, J. I., & Moreno-Alfonso, N. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878356 · Cited by 4,018
Power electronics as efficient interface in dispersed power generation systems
Blaabjerg, F., Chen, Z., & Kjaer, S. B. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833453 · Cited by 2,588
Self-citationAn Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A., Mawby, P., Xiang, D., Ran, L., & Tavner, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,019
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“A power device is one of the vulnerable components of power electronic converters [5].”
BackgroundSelected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 1×
“Therefore, the possibility of failure is higher in the solder joint between DCB and the baseplate [11]–[13].”
BackgroundA Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters
Lu, B., & Sharma, S. K. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2027535 · Cited by 985
Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities
Wang, H., Liserre, M., & Blaabjerg, F. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2252958 · Cited by 916
Self-citationWelchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724
Semiconductor Power Devices: Physics, Characteristics, Reliability
Lutz, J., Schlangenotto, H., Scheuermann, U., & De Doncker, R. (2011) · Springer eBooks · doi:10.1007/978-3-642-11125-9 · Cited by 706
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693 · cited 3×
“However, wear-out failure occurs because of long-term degradation, and catastrophic failures are due to a single overstress event in a short duration [3].”
BackgroundSelf-citation
Cited by
A Data-Driven Fault Diagnosis Methodology in Three-Phase Inverters for PMSM Drive Systems
Cai, B., Zhao, Y., Liu, H., & Xie, M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2608842 · Cited by 471
Modular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
“The diagnosis and the protection of power switching device short-circuit fault is integrated into the gate drivers, which are capable of shutting down power devices within a short period of 10 μs [70].”
BackgroundJlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
“Other statistical results addressed in [4], [5], and [8] show that a very high percentage ( 53%) of failures in power converters are attributed to control circuits.”
BackgroundMethodAdvanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules
Choi, U.-M., Joergensen, S., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2521899 · Cited by 200
Self-citationDiagnosis of Open-Switch and Current Sensor Faults in PMSM Drives Through Stator Current Analysis
Khojet El Khil, S., Jlassi, I., Marques Cardoso, A. J., Estima, J. O., & Mrabet-Bellaaj, N. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2930592 · Cited by 147
Zhou, D., Yang, S., & Tang, Y. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2796584 · Cited by 143
Robustness and Balancing of Parallel-Connected Power Devices: SiC Versus CoolMOS
Hu, J., Alatise, O., Ortiz Gonzalez, J. A., Bonyadi, R., Alexakis, P., Ran, L., & Mawby, P. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2500187 · Cited by 67
Li, C., Luo, H., Li, C., Li, W., Yang, H., & He, X. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2890303 · Cited by 59
“[3]–[5].”
Naseri, F., Schaltz, E., Lu, K., & Farjah, E. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1498 · Cited by 37
Chen, G., & Cai, X. (2018) · IEEE Access · doi:10.1109/access.2018.2789421 · Cited by 30
“Reliability is becoming increasingly important with the increase in the capacity of multi-megawatt wind power converter [21], [22].”
BackgroundIslam, M. M., Rahman, M. A., & Islam, M. R. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.3000596 · Cited by 16
Luo, H., Iannuzzo, F., Blaabjerg, F., Li, W., & He, X. (2017) · IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2017.8216259 · Cited by 16
“In general, the main reasons for the wear-out failures under PCT method are the mismatches of coefficient thermal expansions (CTE) in the power module[4]–[6].”
BackgroundSelf-citation
Metadata
- Authors
- Choi, U.-M., Blaabjerg, F., & Lee, K.-B.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-05
- Volume
- 30
- Issue
- 5
- Pages
- 2517-2533
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2071760299
- Cited by
- 700
- References
- 64
- FWCI
- 16.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.