Steady-State Modeling of Modular Multilevel Converter Under Unbalanced Grid Conditions
The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
This paper presents a steady-state model of MMC for the second-order phase voltage ripple prediction under unbalanced conditions, taking the impact of negative-sequence current control into account. From the steady-state model, a circular relationship is found among current and voltage quantities, which can be used to evaluate the magnitudes and initial phase angles of different circulating current components. Moreover, in order to calculate the circulating current in a point-to-point MMC-based HVdc system under unbalanced grid conditions, the derivation of equivalent dc impedance of an MMC is discussed as well. According to the dc impedance model, an MMC inverter can be represented as a series connected R-L-C branch, with its equivalent resistance and capacitance directly related to the circulating current control parameters. Experimental results from a scaled-down three-phase MMC system under an emulated single-line-to-ground fault are provided to support the theoretical analysis and derived model. This new models provides an insight into the impact of different control schemes on the fault characteristics and improves the understanding of the operation of MMC under unbalanced conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Grainger, J. J., & Stevenson, W. D. (1994) · Cited by 2,754
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387 · cited 1×
“Moreover, the steady-state model can help the circulating current controller design and maximum modulation index calculation, using the same methodology discussed in [40] and [41] for balanced conditions.”
MethodDynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188
Classification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC)
Akagi, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143431 · Cited by 1,172 · cited 1×
“, modular multilevel converters (MMCs) have become a promising technology for high-voltage direct-current (HVdc) transmission systems to transmit power from far away locations, like offshore wind farms, to main ac power grids [1]–[3].”
BackgroundRodriguez, P., Luna, A., Candela, I., Mujal, R., Teodorescu, R., & Blaabjerg, F. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2042420 · Cited by 1,112 · cited 1×
“To achieve an accurate synchronization with the grid voltage, the positive-sequence voltage is extracted with methods proposed in [24] and used as the input of a phaselocked loop (PLL).”
MethodDual current control scheme for PWM converter under unbalanced input voltage conditions
Song, H.-S., & Nam, K. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.793344 · Cited by 930 · cited 1×
“4 shows the diagram of the classic dual-current control, which consists of positive- and negative-sequence current control [22], [23].”
BackgroundOn dynamics and voltage control of the Modular Multilevel Converter
Antonopoulos, A., Ängquist, L., & Nee, H. (2009) · European Conference on Power Electronics and Applications · Cited by 831
New transformerless, scalable Modular Multilevel Converters for HVDC-transmission
Allebrod, S., Hamerski, R., & Marquardt, R. (2008) · 2008 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2008.4591920 · Cited by 785
Grainger, J. J., & Stevenson, W. D. (1994) · CERN Document Server (European Organization for Nuclear Research) · Cited by 747
Dynamic Analysis of Modular Multilevel Converters
Harnefors, L., Antonopoulos, A., Norrga, S., Angquist, L., & Nee, H.-P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194974 · Cited by 623 · cited 2×
“According to [38] and [39], v cu and v k cl can be calculated as”
BackgroundMethodAnalysis of Faulted Power Systems
Anderson, P. M. (2009) · Institute of Electrical and Electronics Engineers eBooks · doi:10.1109/9780470544129 · Cited by 586
Guan, M., & Xu, Z. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192752 · Cited by 549 · cited 1×
“References [12] and [13] give the analytical relationship among instantaneous active/ reactive power and fundamental frequency positive- as well as negative-sequence voltage and current in ac terminals.”
BackgroundElectric Energy Systems : Analysis and Operation
Gómez‐Expósito, A., Conejo, A. J., & Cañizares, C. A. (2008) · Cited by 519
A Steady-State Analysis Method for a Modular Multilevel Converter
Song, Q., Liu, W., Li, X., Rao, H., Xu, S., & Li, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227818 · Cited by 503 · cited 2×
“In summary, compared to [37], the steady-state model under unbalanced conditions is more complicated, especially when negative-sequence phase current control is adopted.”
BackgroundOn Energy Storage Requirements in Modular Multilevel Converters
Ilves, K., Norrga, S., Harnefors, L., & Nee, H.-P. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2254129 · Cited by 353
Yazdani, A., & Iravani, R. (2006) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2006.874641 · Cited by 308
A Control Method for Voltage Balancing in Modular Multilevel Converters
Deng, F., & Chen, Z. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251426 · Cited by 296 · cited 1×
“Moreover, the operation principle and design considerations of circulating current suppression as well as capacitor voltage balancing control schemes can be further understood [9]–[11].”
BackgroundModern HVDC PLUS application of VSC in Modular Multilevel Converter topology
Friedrich, K. (2010) · 2010 IEEE International Symposium on Industrial Electronics · doi:10.1109/isie.2010.5637505 · Cited by 280 · cited 1×
“, modular multilevel converters (MMCs) have become a promising technology for high-voltage direct-current (HVdc) transmission systems to transmit power from far away locations, like offshore wind farms, to main ac power grids [1]–[3].”
BackgroundSuh, Y., & Lipo, T. A. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.873673 · Cited by 264
Circulating Current Control in MMC Under the Unbalanced Voltage
Moon, J.-W., Kim, C.-S., Park, J.-W., Kang, D.-W., & Kim, J.-M. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2264496 · Cited by 237 · cited 1×
“As an improvement, instantaneous active power in each phase unit is derived in [14], considering negative-sequence circulating current.”
BackgroundSuppressing DC Voltage Ripples of MMC-HVDC Under Unbalanced Grid Conditions
Tu, Q., Xu, Z., Chang, Y., & Guan, L. (2012) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2196804 · Cited by 236 · cited 1×
“References [12] and [13] give the analytical relationship among instantaneous active/ reactive power and fundamental frequency positive- as well as negative-sequence voltage and current in ac terminals.”
BackgroundSolas, E., Abad, G., Barrena, J. A., Aurtenetxea, S., Carcar, A., & Zajac, L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2211431 · Cited by 193
Hu, J., & He, Y. (2008) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2008.921468 · Cited by 177
Shi, X., Wang, Z., Liu, B., Liu, Y., Tolbert, L. M., & Wang, F. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2323360 · Cited by 173 · cited 1×
“1, zero-sequence current will be blocked under unbalanced grid conditions, and no corresponding current control is required [25].”
BackgroundSelf-citationIlves, K., Harnefors, L., Norrga, S., & Nee, H.-P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2308018 · Cited by 151
Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions
Zhou, Y., Jiang, D., Guo, J., Hu, P., & Liang, Y. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2268981 · Cited by 150 · cited 1×
“Recently, according to ac/dc decomposed circuit of a single-phase MMC and active power balance between ac and dc terminals, a simple method is used for arm and circulating current calculation in [15].”
MethodTeeuwsen, S. P. (2011) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2011.6038903 · Cited by 138 · cited 1×
“The steady-state and dynamic analysis of MMC under normal operation have been thoroughly discussed in the existing literature, using large-signal and/or small-signal models [4]–[6].”
Global Asymptotic Stability of Modular Multilevel Converters
Antonopoulos, A., Angquist, L., Harnefors, L., Ilves, K., & Nee, H.-P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2254100 · Cited by 111 · cited 2×
“According to [38] and [39], v cu and v k cl can be calculated as”
BackgroundMethodRadojević, Z. M., & Shin, J.-R. (2007) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2006.886781 · Cited by 111
Vector-Controlled Voltage-Source-Converter-Based Transmission Under Grid Disturbances
Parkhideh, B., & Bhattacharya, S. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2204071 · Cited by 54 · cited 1×
“4 shows the diagram of the classic dual-current control, which consists of positive- and negative-sequence current control [22], [23].”
BackgroundXiao, L., Huang, S., & Lu, K. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0576 · Cited by 45 · cited 2×
“Assume a single-line-to-ground (SLG) fault occurring in the primary side of the Y/Δ transformer in MMC1 station, which will create an unbalanced voltage in PCC1 [26]–[29].”
BackgroundMaximum modulation index for modular multilevel converter with circulating current control
Li, Y., Shi, X., Liu, B., Wang, F., & Lei, W. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953434 · Cited by 18 · cited 1×
“Moreover, the steady-state model can help the circulating current controller design and maximum modulation index calculation, using the same methodology discussed in [40] and [41] for balanced conditions.”
MethodSelf-citationLi, Y., Jones, E. A., & Wang, F. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803308 · Cited by 7
Self-citation
Research works printed but not linked: 6
- godoy, 0, Tutorial on single-pole tripping and reclosing, Proc 35th Annu Western Protective Relay Conf, 1
- serna reyna, 0, Transmission line single-pole tripping: field experience of the western transmission area of Mexico, Proc 35th Annu Western Protective Relay Conf, 1
- ma, 2014, System scheme of Zhoushan multi-terminal VSC-HVDC project, Electric Power Construction, 35, 1
- saad, 0, Commissioning of the France Spain HVDC VSC control system replicas, Proc CIGRE-IEC Colloquium, 1
- tu, 2012, Reduced switching-frequency modulation and circulating current suppression for modular multilevel converter, IEEE Trans Power Del, 26, 2009
- ängquist, 0, On dynamics and voltage control of the modular multilevel converter, Proc Eur Conf Power Electron Appl, 1
Cited by
Modular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
Sinha, A., Jana, K. C., & Das, M. K. (2018) · Solar Energy · doi:10.1016/j.solener.2018.06.001 · Cited by 135
Zhu, J., Hu, J., Wang, S., & Wan, M. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.2976776 · Cited by 63
A Comprehensive Review on Multilevel Inverters for Grid-Tied System Applications
Salem, M., Richelli, A., Yahya, K. A., Hamidi, M. N., Ang, T.-Z., & Alhamrouni, I. (2022) · Energies · doi:10.3390/en15176315 · Cited by 63
Wang, Z., Chinthavali, M., Campbell, S. L., Wu, T., & Ozpineci, B. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2938471 · Cited by 55
Self-citation
Metadata
- Authors
- Shi, X., Wang, Z., Liu, B., Li, Y., Tolbert, L. M., & Wang, F.
- Affiliations
- University of Tennessee at Knoxville (US)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-09
- Volume
- 32
- Issue
- 9
- Pages
- 7306-7324
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2551352876
- Cited by
- 73
- References
- 32
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 10 · 2023: 8 · 2022: 4 · 2021: 11 · 2020: 15 · 2019: 8 · 2018: 9 · 2017: 5
- FWCI
- 3.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Engineering Research Center Program of the National Science Foundation
- NSF (EEC-1041877)
- CURENT Industry Partnership Program
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Power Quality and Harmonics
- Keywords
- modular multilevel converter, steady-state model, unbalanced grid conditions, negative sequence current control, circulating current, HVDC transmission, single-phase grounding fault, fault characteristics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.