A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
This article proposes a health indicator estimation method based on the digital-twin concept aiming for condition monitoring of power electronic converters. The method is noninvasive, without additional hardware circuits, and calibration requirements. An application for a buck dc-dc converter is demonstrated with theoretical analyses, practical considerations, and experimental verifications. The digital replica of an experimental prototype is established, which includes the power stage, sampling circuit, and close-loop controller. Particle swarm optimization algorithm is applied to estimate the unknown circuit parameters of interest based on the incoming data from both the digital twin and the physical prototype. Cluster-data of the estimated health indicators under different testing conditions of the buck converter is analyzed and used for observing the degradation trends of key components, such as capacitor and MOSFET. The outcomes of this article serve as a key step for achieving noninvasive, cost-effective, and robust condition monitoring for power electronic converters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adaptive Particle Swarm Optimization
Zhan, Z.-H., Zhang, J., Li, Y., & Chung, H. S.-H. (2009) · IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics) · doi:10.1109/tsmcb.2009.2015956 · Cited by 2,075
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Extended kalman filter tuning in sensorless PMSM drives
Bolognani, S., Tubiana, L., & Zigliotto, M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818991 · Cited by 578
Oh, H., Han, B., McCluskey, P., Han, C., & Youn, B. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2346485 · Cited by 513
A Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
A Review of the Condition Monitoring of Capacitors in Power Electronic Converters
Soliman, H., Wang, H., & Blaabjerg, F. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2591906 · Cited by 285
Self-citationVogelsberger, M. A., Wiesinger, T., & Ertl, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2059713 · Cited by 244
Luo, H., Chen, Y., Sun, P., Li, W., & He, X. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2481465 · Cited by 240
In Situ Diagnostics and Prognostics of Solder Fatigue in IGBT Modules for Electric Vehicle Drives
Ji, B., Song, X., Cao, W., Pickert, V., Hu, Y., Mackersie, J. W., & Pierce, G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2318991 · Cited by 201
Advanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules
Choi, U.-M., Joergensen, S., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2521899 · Cited by 200
Monitoring Solder Fatigue in a Power Module Using Case-Above-Ambient Temperature Rise
Xiang, D., Ran, L., Tavner, P., Bryant, A., Yang, S., & Mawby, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168556 · Cited by 193
Milton, M., De La O, C., Ginn, H. L., & Benigni, A. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2971775 · Cited by 192
Condition Monitoring Power Module Solder Fatigue Using Inverter Harmonic Identification
Xiang, D., Ran, L., Tavner, P., Yang, S., Bryant, A., & Mawby, P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160988 · Cited by 174
Online Vce measurement method for wear-out monitoring of high power IGBT modules
Beczkowski, S., Ghimre, P., de Vega, A. R., Munk-Nielsen, S., Rannestad, B., & Thogersen, P. (2013) · 2013 15th European Conference on Power Electronics and Applications (EPE) · doi:10.1109/epe.2013.6634390 · Cited by 170
IGBT Junction Temperature Measurement via Peak Gate Current
Baker, N., Munk-Nielsen, S., Iannuzzo, F., & Liserre, M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2464714 · Cited by 166
Dusmez, S., Duran, H., & Akin, B. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2518127 · Cited by 164
Real-Time Aging Monitoring for IGBT Modules Using Case Temperature
Wang, Z., Tian, B., Qiao, W., & Qu, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497665 · Cited by 150
Low Stress Cycle Effect in IGBT Power Module Die-Attach Lifetime Modeling
Lai, W., Chen, M., Ran, L., Alatise, O., Xu, S., & Mawby, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2501540 · Cited by 134
Online Condition Monitoring of Power MOSFET Gate Oxide Degradation Based on Miller Platform Voltage
Ye, X., Chen, C., Wang, Y., Zhai, G., & Vachtsevanos, G. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2602323 · Cited by 129
Quasi-Online Technique for Health Monitoring of Capacitor in Single-Phase Solar Inverter
Agarwal, N., Ahmad, M. W., & Anand, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2736162 · Cited by 113
In situ Condition Monitoring of IGBTs Based on the Miller Plateau Duration
Liu, J., Zhang, G., Chen, Q., Qi, L., Geng, Y., & Wang, J. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2820700 · Cited by 111
IGBT Junction Temperature Estimation via Gate Voltage Plateau Sensing
van der Broeck, C. H., Gospodinov, A., & Doncker, R. W. D. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2836362 · Cited by 110
Fault Diagnosis of Photovoltaic Panels Using Dynamic Current–Voltage Characteristics
Wang, W., Liu, A. C.-F., Chung, H. S.-H., et al. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2424079 · Cited by 107
Fault Prognosis for Power Electronics Systems Using Adaptive Parameter Identification
Poon, J., Jain, P., Spanos, C. J., Panda, S. K., & Sanders, S. R. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2664052 · Cited by 102
A VEN Condition Monitoring Method of DC-Link Capacitors for Power Converters
Wu, Y. H., & Du, X. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835393 · Cited by 100
Li, B. X., & Low, K. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2472459 · Cited by 99
Condition Monitoring of DC-Link Capacitors in Aerospace Drives
Wechsler, A. S., Mecrow, B. C., Atkinson, D. J., Bennett, J. W., & Benarous, M. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2222333 · Cited by 94
Heath Monitoring of Capacitors and Supercapacitors Using the Neo-Fuzzy Neural Approach
Soualhi, A., Makdessi, M., German, R., Echeverria, F. R., Razik, H., Sari, A., Venet, P., & Clerc, G. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2701823 · Cited by 94
Lifetime Estimation of Discrete IGBT Devices Based on Gaussian Process
Ali, S. H., Heydarzadeh, M., Dusmez, S., Li, X., Kamath, A. S., & Akin, B. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2753722 · Cited by 92
Condition monitoring for DC-link capacitors based on artificial neural network algorithm
Soliman, H., Wang, H., Gadalla, B., & Blaabjerg, F. (2015) · International Conference on Power Engineering, Energy and Electrical Drives · doi:10.1109/powereng.2015.7266382 · Cited by 84
Self-citationAnalysis of the Results of Accelerated Aging Tests in Insulated Gate Bipolar Transistors
Astigarraga, D., Ibáñez, F. M., Galarza, A., Echeverría, J. M., Unanue, I., Baraldi, P., & Zio, E. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2512923 · Cited by 80
Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics
Alghassi, A., Perinpanayagam, S., Samie, M., & Sreenuch, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360662 · Cited by 77
An accelerated thermal aging platform to monitor fault precursor on-state resistance
Dusmez, S., & Akin, B. (2015) · 2015 IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2015.7409238 · Cited by 73
Sensing Power MOSFET Junction Temperature Using Gate Drive Turn-On Current Transient Properties
Niu, H., & Lorenz, R. D. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2497202 · Cited by 65
Düşmez, S., Bhardwaj, M., Sun, L., & Akin, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2595482 · Cited by 60
Application of Digital Twin Concept in Condition Monitoring for DC-DC Converter
Peng, Y., & Wang, H. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912199 · Cited by 59
Self-citationMandeya, R., Chen, C., Pickert, V., & Naayagi, R. T. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2749179 · Cited by 58
Kimball, J. W., & Krein, P. T. (2008) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522895 · Cited by 25
Cited by
Towards the future of smart electric vehicles: Digital twin technology
Bhatti, G., Mohan, H., & Raja Singh, R. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110801 · Cited by 533
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
A Survey on Digital Twin for Industrial Internet of Things: Applications, Technologies and Tools
Xu, H., Wu, J., Pan, Q., Guan, X., & Guizani, M. (2023) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2023.3297395 · Cited by 304
De Kooning, J. D. M., Stockman, K., De Maeyer, J., Jarquin-Laguna, A., & Vandevelde, L. (2021) · Processes · doi:10.3390/pr9122224 · Cited by 57
“A digital twin with real-time simulation capabilities for health and reliability monitoring of power electronic converters was realized in [139,140] respectively.”
MethodThermal Digital Twin of Power Electronics Modules for Online Thermal Parameter Identification
Kuprat, J., Debbadi, K., Schaumburg, J., Liserre, M., & Langwasser, M. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3328219 · Cited by 39
Metadata
- Authors
- Peng, Y., Zhao, S., & Wang, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2021-02
- Volume
- 36
- Issue
- 2
- Pages
- 2105-2118
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W3043679992
- Cited by
- 305
- References
- 38
- FWCI
- 11.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.