Cited by 673Electric Motor Design and AnalysisElectric and Hybrid Vehicle TechnologiesSensorless Control of Electric Motors

The DOI matches its Crossref record; 83 of the 87 references it cites were found in a registry or an index.

Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review

Open access

de Santiago, Juan, Bernhoff, Hans, Ekergård, Boel, Eriksson, Sandra, Ferhatovic, Senad, Waters, Rafael, Leijon, Mats·2012·IEEE Transactions on Vehicular Technology

DOI 10.1109/tvt.2011.2177873

Open this paper in CoChat — free account

Abstract

This paper presents a critical review of the drivelines in all-electric vehicles (EVs). The motor topologies that are the best candidates to be used in EVs are presented. The advantages and disadvantages of each electric motor type are discussed from a system perspective. A survey of the electric motors used in commercial EVs is presented. The survey shows that car manufacturers are very conservative when it comes to introducing new technologies. Most of the EVs on the market mount a single induction or permanent-magnet (PM) motor with a traditional mechanic driveline with a differential. This paper illustrates that comparisons between the different motors are difficult by the large number of parameters and the lack of a recommended test scheme. The authors propose that a standardized drive cycle be used to test and compare motors.

Integrity signals

Registry

Crossref · 10.1109/tvt.2011.2177873

Cites

83 of 83 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Multiphase Electric Machines for Variable-Speed Applications
LEVI, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,162
Multiphase induction motor drives – a technology status review
LEVI, E., Bojoi, R. I., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,620
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,499
Design considerations for a contactless electric vehicle battery charger
Wang, C.-S., Stielau, O., & Covic, G. (2005) · IEEE transactions on industrial electronics (1982. Print) · doi:10.1109/tie.2005.855672 · Cited by 1,474
The state of the art of electric and hybrid vehicles
Chan, C. C. (2002) · Proceedings of the IEEE · doi:10.1109/5.989873 · Cited by 1,102
Electric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling
Chan, C. C., Bouscayrol, A., & Chen, K. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2033605 · Cited by 792
Batteries and Ultracapacitors for Electric, Hybrid, and Fuel Cell Vehicles
Burke, A. F. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892490 · Cited by 790
Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study
Zeraoulia, M., Benbouzid, M., & Diallo, D. (2006) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.878719 · Cited by 692
Beyond batteries: an examination of the benefits and barriers to plug-in hybrid electric vehicles (PHEVs) and a vehicle-to-grid (V2G) transition
Sovacool, B. K., & Hirsh, R. F. (2009) · Energy Policy · doi:10.1016/j.enpol.2008.10.005 · Cited by 630
An overview of power electronics in electric vehicles
Chan, C. C., & Chau, K. T. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.557493 · Cited by 488

Flagged first, then by citations

Show all 87 references

4 of the 87 references couldn’t be matched to a known paper.

Research works printed but not linked: 14

0, A rotary electric machine a rotor for a such and a Vehicle/craft with such a machine
2008, Michelin Active Wheel Press Kit 2008 Paris Motor Show
harris, 2010, REV SAE Front Drive Final Year Project Thesis School of Mechanical Engineering Univ Western Australia
gieras, 2002, Permanent Magnet Motor Technology Revised
fenton, 2000, Lightweight Electric/Hybrid Vehicle Design Automotive Engineering Series
2010, Autonomous modular vehicle wheel assembly
2010, The 2010 Paris Motor Show Press Release
2011, One Million Electric Vehicles By 2015 Feb 2011 Status Report
curley, 2010, The Britannica Guide to Inventions That Changed the Modern World, 162
0, Presentation of the Swedish National Road Administration (SNRA)
2006, Nuclear Power Reactors in the World
situ, 2009, Electric vehicle development: The past, present and future, Proc 3rd Int Conf PESA, 1
2011, White Paper Roadmap to a Single European Transport AreaTowards a Competitive and Resource Efficient Transport System
santiago, 2010, Comparison between axial and radial flux PM coreless machines for flywheel energy storage, J Elect Syst, 6, 1

Sorted by citations

Items 101–200 of 673

Prospects for purely electric construction machinery: Mechanical components, control strategies and typical machines
Huang, X., Yan, W., Cao, H., Chen, S., Tao, G., & Zhang, J. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105477 · Cited by 51
Dual-Motor Planetary Transmission to Improve Efficiency in Electric Vehicles
Mantriota, G., & Reina, G. (2021) · Machines · doi:10.3390/machines9030058 · Cited by 51
A technical review of modern traction inverter systems used in electric vehicle application
Sambhavi, Y. V., & Ramachandran, V. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.10.056 · Cited by 52
Nonlinear Model Predictive Speed Control of Electric Vehicles Represented by Linear Parameter Varying Models With Bias Terms
Vafamand, N., Arefi, M. M., Khooban, M. H., Dragičević, T., & Blaabjerg, F. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2884346 · Cited by 50
Energy Consumption and Lifecycle Cost Analysis of Electric City Buses with Multispeed Gearboxes
Ritari, A., Vepsäläinen, J., Kivekäs, K., Tammi, K., & Laitinen, H. (2020) · Energies · doi:10.3390/en13082117 · Cited by 50
Stator Winding Internal Thermal Monitoring and Analysis Using In Situ FBG Sensing Technology
Mohammed, A., & Djurović, S. (2018) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2826229 · Cited by 48
An Overview of MnAl Permanent Magnets with a Study on Their Potential in Electrical Machines
Kontos, S., Ibrayeva, A., Leijon, J., Mörée, G., Frost, A. E., Schönström, L., Gunnarsson, K., Svedlindh, P., Leijon, M., & Eriksson, S. (2020) · Energies · doi:10.3390/en13215549 · Cited by 48
Self-citation
Electromagnetic Performance Investigation of a Brushless Electrically Excited Synchronous Machine for Long-Distance Heavy-Duty Electric Vehicles
Chen, H., Tang, J., Liu, Y., Jiang, B., & Boscaglia, L. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3388430 · Cited by 47
Comparison of Stator Winding Technologies for High-Speed Motors in Electric Propulsion Systems
Dimier, T., Cossale, M., & Wellerdieck, T. (2020) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem49940.2020.9270943 · Cited by 46
Effect of the unbalanced vertical force of a switched reluctance motor on the stability and the comfort of an in-wheel motor electric vehicle
Wang, Y., Li, Y., Sun, W., & Zheng, L. (2015) · Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering · doi:10.1177/0954407014566438 · Cited by 44
An Improved Direct Torque Control with Battery Power Management of Open-End Winding Induction Motor Drive for Electric Vehicles
Muduli, U. R., Beig, A. R., Jaafari, K. A. A., Alsawalhi, J. Y., & Behera, R. K. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236199 · Cited by 44
Multiphase electrical machines and drives in the transportation electrification
Bojoi, R. I., Cavagnino, A., Tenconi, A., Tessarolo, A., & Vaschetto, S. (2015) · IEEE International Forum on Research and Technology for Society and Industry (RTSI) · doi:10.1109/rtsi.2015.7325099 · Cited by 43
Control Method of Mono Inverter Dual Parallel Drive System with Interior Permanent Magnet Synchronous Machines
Lee, Y., & Ha, J.-I. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2508063 · Cited by 43
The Key Role of 3D Printing Technologies in the Further Development of Electrical Machines
Szabó, L., & Fodor, D. (2022) · Machines · doi:10.3390/machines10050330 · Cited by 44
Investigation on performance evaluation of electric vehicle batteries under different drive cycles
Singirikonda, S., & Obulesu, Y. P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106966 · Cited by 42
Finite-element design and analysis of switched reluctance motor for automobile applications
Raj, E. F. I., Appadurai, M., Rani, E. F. I., & Jenish, I. (2022) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-022-00119-8 · Cited by 42
Design and Optimization of Permanent Magnet Brushless Machines for Electric Vehicle Applications
Gu, W., Zhu, X., Li, Q., & Du, Y. (2015) · Energies · doi:10.3390/en81212410 · Cited by 40
Topology optimization and the evolution trends of two-speed transmission of EVs
Gao, B., Meng, D., Shi, W., Cai, W., Dong, S., Zhang, Y., & Chen, H. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112390 · Cited by 40
Fundamentals of Power Electronics Controlled Electric Propulsion
Jain, S., & Kumar, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811407-0.00035-0 · Cited by 40
CO2-to-methanol: Economic and environmental comparison of emerging and established technologies with dry reforming and methane pyrolysis
Zong, Z., Koers, N., Cai, G., & Upham, D. C. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150274 · Cited by 39
Manufacturing Influences on the Motor Performance of Traction Drives with Hairpin Winding
Glaessel, T., Pinhal, D. B., Masuch, M., Gerling, D., & Franke, J. E. (2019) · International Electric Drives Production Conference · doi:10.1109/edpc48408.2019.9011872 · Cited by 39
Experimental Study on Behavior of Coolants, Particularly the Oil-Cooling Method, in Electric Vehicle Motors Using Hairpin Winding
Ha, T.-W., Han, N. G., Kim, M. S., Rho, K. H., & Kim, D. K. (2021) · Energies · doi:10.3390/en14040956 · Cited by 39
Multiobjective Optimization of IPMSM With FSCW Applying Rotor Notch Design for Torque Performance Improvement
Sun, K., & Tian, S. (2022) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2022.3155269 · Cited by 39
Modelling approach for assessing influential factors for EV energy performance
Sagaria, S., Neto, R. C., & Baptista, P. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2020.100984 · Cited by 38
Global Perspectives on and Research Challenges for Electric Vehicles
Novas, N., García, R. M., Portillo, F., Robalo, I., Alcayde, A., Fernández-Ros, M., & Parra, J. A. G. (2022) · Vehicles · doi:10.3390/vehicles4040066 · Cited by 38
Electric machines and energy storage technologies in EVs and HEVs for over a century
Bazzi, A. M. (2013) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2013.6556255 · Cited by 38
Predictive Control based Battery Power Sharing for Four-Wheel Drive Electric Vehicle
Muduli, U. R., Jaafari, K. A. A., Behera, R. K., Beig, A. R., & Alsawalhi, J. Y. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487084 · Cited by 37
Predictive Battery SoC Control for Dual Propulsion Differential Four Wheel Drive Electric Vehicle
Muduli, U. R., Jaafari, K. A. A., Behera, R. K., Beig, A. R., Hosani, K. H. A., & Alsawalhi, J. Y. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595587 · Cited by 37
An insight into motor and battery selections for three-wheeler electric vehicle
Sreejith, R., & Rajagopal, K. (2016) · IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems · doi:10.1109/icpeices.2016.7853494 · Cited by 37
Acceleration, Drive Cycle Efficiency, and Cost Tradeoffs for Scaled Electric Vehicle Drive System
Grunditz, E. A., Thiringer, T., & Saadat, N. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2976861 · Cited by 37
State of the Art of Magnetic Gears, their Design, and Characteristics with Respect to EV Application
Fodorean, D. (2016) · InTech eBooks · doi:10.5772/64174 · Cited by 37
Advances in electric two-wheeler technologies
Nayak, A. K., Babu, G., & Ajayan, P. M. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.02.008 · Cited by 36
Hybrid and electric vehicle tribology: a review
Hemanth, G., Suresha, B., & Ananthapadmanabha (2021) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/ac2bf6 · Cited by 35
Battery electric vehicles for goods distribution: a survey of vehicle technology, market penetration, incentives and practices
Pelletier, S. D., Jabali, O., & Gilbert Laporte, A. (2014) · Cited by 35
Mitigating the Effect of Noise Uncertainty on the Online State-of-Charge Estimation of Li-Ion Battery Cells
Wadi, A., Abdel–Hafez, M. F., & Hussein, A. A.-H. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2928047 · Cited by 35
Multi-Objective Energy Management Strategy Based on PSO Optimization for Power-Split Hybrid Electric Vehicles
Du, A., Chen, Y., Zhang, D., & Han, Y. (2021) · Energies · doi:10.3390/en14092438 · Cited by 35
PM-less machine topologies for EV traction: A literature review
Estenlund, S., Alaküla, M., & Reinap, A. (2016) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2016.7841341 · Cited by 35
Modified Model Predictive Control for Bidirectional Four-Quadrant EV Chargers With Extended Set of Voltage Vectors
He, T., Zhu, J. G., Lu, D. D., & Zheng, L. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2870481 · Cited by 34
Improved Backstepping Control with Nonlinear Disturbance Observer for the Speed Control of Permanent Magnet Synchronous Motor
Liu, X., Li, K., & Zhang, C. (2019) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-018-00021-9 · Cited by 34
Long-Term Monitoring of Extremely Low Frequency Magnetic Fields in Electric Vehicles
Yang, L., Lu, M., Lin, J., Li, C., Zhang, C., Lai, Z., & Wu, T. (2019) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph16193765 · Cited by 34
Robust Sensorless Control Against Thermally Degraded Speed Performance in an IM Drive Based Electric Vehicle
Ali, S. M. N., Hossain, M. J., Wang, D., Lu, K., Rasmussen, P. O., Sharma, V., & Kashif, M. (2020) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.2968547 · Cited by 34
Field-oriented control strategy for double-stator single-rotor and double-rotor single-stator permanent magnet machine: Design and operation
Flah, A., Khan, I. A., Agarwal, A., Sbita, L., & Simões, M. G. (2021) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2020.106953 · Cited by 34
Discrete-time sliding mode controller based on backstepping disturbance compensation for robust current control of PMSM drives
Gabbi, T. S., de Araujo, M. B., Rocha, L. R., Scalcon, F. P., Gründling, H. A., & Vieira, R. P. (2021) · ISA Transactions · doi:10.1016/j.isatra.2021.10.032 · Cited by 34
Real-time and hierarchical energy management-control framework for electric vehicles with dual-motor powertrain system
Yu, X. Q., Lin, C. W., Tian, Y., Zhao, M., Liu, H., Xie, P., & Zhang, J. (2023) · Energy · doi:10.1016/j.energy.2023.127112 · Cited by 33
Design of an Axial-Flux Interior Permanent-Magnet Synchronous Motor for Automotive Application: Performance Comparison with Electric Motors Used in EVs and HEVs
Benlamine, R., Dubas, F., Espanet, C., Randi, S. A., & Lhotellier, D. (2014) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2014.7007043 · Cited by 33
Electric Vehicle Drivetrain Efficiency and the Multi-Speed Transmission Question
Lacock, S., du Plessis, A. A., & Booysen, M. J. (2023) · World Electric Vehicle Journal · doi:10.3390/wevj14120342 · Cited by 32
A Review of Perception Technologies for Berry Fruit-Picking Robots: Advantages, Disadvantages, Challenges, and Prospects
Wang, C., Pan, W., Zou, T., Li, C., Han, Q., Wang, H., Yang, J., & Zou, X. (2024) · Agriculture · doi:10.3390/agriculture14081346 · Cited by 39
Equations for the approximate calculation of forces between cuboid magnets
Schomburg, W. K., Reinertz, O., Sackmann, J., & Schmitz, K. (2020) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2020.166694 · Cited by 32
Effect of Temperature and Surface Roughness on the Tribological Behavior of Electric Motor Greases for Hybrid Bearing Materials
Garrido, D. S., Leventini, S., & Martini, A. (2021) · Lubricants · doi:10.3390/lubricants9060059 · Cited by 32
Multiphase Stator Winding: New Perspectives, Advanced Topologies, and Futuristic Applications
Metwly, M. Y., Abdel-Khalik, A. S., Hamad, M. S., Ahmed, S., & Elmalhy, N. A. (2022) · IEEE Access · doi:10.1109/access.2022.3209372 · Cited by 32
Four-Level Hybrid Neutral Point Clamped Converters
Chen, J., Zhong, Y., Wang, C., & Fu, Y. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3060906 · Cited by 31
On-board integrated battery chargers for electric vehicles using nine-phase machines
Subotić, I., LEVI, E., Jones, M., & Graovac, D. (2013) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2013.6556257 · Cited by 31
Comparative Assessment of Single Piece and Fir-Tree-Based Spoke Type Rotor Designs for Low-Cost Electric Vehicle Application
Kimiabeigi, M., Long, R., Widmer, J. D., & Gao, Y. (2017) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2017.2662579 · Cited by 30
Modelling and comparative dynamic analysis due to demagnetization of a torque controlled permanent magnet synchronous motor drive for energy-efficient electric vehicle
Sain, C., Banerjee, A., & Biswas⃰, P. K. (2019) · ISA Transactions · doi:10.1016/j.isatra.2019.08.008 · Cited by 30
Modeling and Detection of Phase Current Sensor Gain Faults in PMSM Drives
Attaianese, C., D’Arpino, M., Monaco, M. D., & Noia, L. P. D. (2022) · IEEE Access · doi:10.1109/access.2022.3195025 · Cited by 30
Electric Motors and Speed Sensorless Control for Electric and Hybrid Electric Vehicles: A Review
Rind, S. J., Jamil, M., & Amjad, A. (2018) · International Universities Power Engineering Conference (UPEC) · doi:10.1109/upec.2018.8541871 · Cited by 30
An integrated battery charger for EVs based on an asymmetrical six-phase machine
Subotić, I., LEVI, E., Jones, M., & Graovac, D. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700337 · Cited by 29
Control Strategy for Power Distribution in Dual Motor Propulsion System for Electric Vehicles
Coronado, P. D. U., & Ahuett‐Garza, H. (2015) · Mathematical Problems in Engineering · doi:10.1155/2015/814307 · Cited by 29
Real-Time Optimal Control of a 3-Phase PMSM in 2-Phase Degraded Mode
Béthoux, O., Labouré, É., Rémy, G., & Berthelot, É. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2016.2583662 · Cited by 29
Drive-Cycle-Based Configuration Design and Energy Efficiency Analysis of Dual-Motor 4WD System With Two-Speed Transmission for Electric Vehicles
Wang, J., Zhang, C., Guo, D., Yang, F., Zhang, Z., & Zhao, M. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3277479 · Cited by 28
A Model Predictive Control Scheme for a Single-Phase Integrated Battery Charger With Active Power Decoupling for EV Application
Bhule, D., & Kaarthik, R. S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3350991 · Cited by 28
Low-Cost Low-Resolution Sensorless Positioning of DC Motor Drives for Vehicle Auxiliary Applications
Knežević, J. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2268716 · Cited by 28
Improving Electric Vehicle Energy Efficiency with Two-Speed Gearbox
Laitinen, H., Lajunen, A., & Tammi, K. (2017) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2017.8330889 · Cited by 28
Fatigue life calculation procedure for the rotor of an embedded magnet traction motor taking into account thermomechanical loads
Sikanen, E., Nerg, J. K., Heikkinen, J., Tehrani, M. G., & Sopanen, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.03.055 · Cited by 27
Cost-Effective Current Measurement Technique for Four-Phase SRM Control by Split Dual Bus Line Without Pulse Injection and Voltage Penalty
Gan, C., Sun, Q., Jin, N., Tolbert, L. M., Ling, Z., Hu, Y., & Wu, J. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2772152 · Cited by 27
Efficiency and performance analysis of DTC‐based IM drivetrain using variable dc‐link voltage for electric vehicle applications
Prabhakar, K. K., Chinthakunta, U. R., Singh, A. K., & Kumar, P. (2018) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2017.0086 · Cited by 26
A New Class of Devices: Magnetic Gear Differentials for Vehicle Drivetrains
Filippini, M., Torchio, R., Alotto, P., Bonisoli, E., Dimauro, L., & Repetto, M. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3208628 · Cited by 26
State-of-the-art in bioresources for sustainable transportation
Verma, J., & Goel, S. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.206 · Cited by 26
Analysis and Experiment of a Dual Stator/Rotor PM and Winding Flux Modulated PM Machine
Jia, S., Sun, P., Feng, S., Chen, P., Liang, D., & Liu, J. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3227887 · Cited by 26
Torque Distribution Optimization for a Dual-Motor Electric Vehicle Using Adaptive Network-Based Fuzzy Inference System
Nguyen, C. T. P., Nguyễn, B., Trovão, J. P. F., & Ta, M. C. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3285225 · Cited by 26
Eco-Friendly Route Planning Algorithms: Taxonomies, Literature Review and Future Directions
Fahmin, A., Cheema, M. A., Ali, M. E., Toosi, A. N., Lu, H. C., Li, H., Taniar, D., Rakha, H. A., & Shen, B. (2024) · ACM Computing Surveys · doi:10.1145/3691624 · Cited by 25
Aerial e-mobility perspective: Anticipated designs and operational capabilities of eVTOL urban air mobility (UAM) aircraft
Marzouk, O. A. (2025) · Edelweiss Applied Science and Technology · doi:10.55214/25768484.v9i1.4156 · Cited by 27
IoT-Based Supervisory Control of an Asymmetrical Nine-Phase Integrated on-Board EV Battery Charger
Metwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Torki, M., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2984737 · Cited by 25
Eco-Friendly Automotive Climate Control and Navigation System for Electric Vehicles
Vatanparvar, K., & Faruque, M. A. A. (2016) · ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS) · doi:10.1109/iccps.2016.7479101 · Cited by 25
Modal analysis of different drivetrain configurations in electric vehicles
Tuononen, A. J., & Lajunen, A. (2016) · Journal of Vibration and Control · doi:10.1177/1077546316635857 · Cited by 25
Analysis and design of a high power density permanent magnet-assisted synchronous reluctance machine with low-cost ferrite magnets for EVs/HEVs
Liu, X., Li, Y., Liu, Z., Ling, T., & Luo, Z. (2016) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-05-2016-0233 · Cited by 25
An integrated battery charger for EVs based on a symmetrical six-phase machine
Subotic, I., & Levi, E. (2014) · 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864937 · Cited by 24
Real-Time Multi-Rate Predictive Cascade Speed Control of Synchronous Machines in Automotive Electrical Traction Drives
Carpiuc, S., & Lazǎr, C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2561881 · Cited by 24
Design, analysis, and control of in-wheel switched reluctance motor for electric vehicles
Omaç, Z., Polat, M., Öksüztepe, E., Yıldırım, M., Yakut, O., Eren, H., Kaya, M., & Kürüm, H. (2017) · Electrical Engineering · doi:10.1007/s00202-017-0541-3 · Cited by 24
Calibration and optimization of an electric vehicle powertrain system
Dong, Q., Qi, H., Liu, X., & Wang, Y. (2018) · Journal of the Chinese Institute of Engineers · doi:10.1080/02533839.2018.1530952 · Cited by 24
The Electric Vehicle Surge: Effective Solutions for Charging Challenges with Advanced Converter Technologies
Narasipuram, R. P., Pasha, M. M., Tabassum, S., & Tandon, A. S. (2025) · Energy Engineering · doi:10.32604/ee.2025.055134 · Cited by 24
Optimal design of a wireless power transfer link using parallel and series resonators
Monti, G., Costanzo, A., Mastri, F., & Mongiardo, M. (2016) · Wireless Power Transfer · doi:10.1017/wpt.2016.7 · Cited by 23
Variable-speed, sub-harmonically excited BL-WRSM avoiding unbalanced radial force
Ali, Q., Bukhari, S. S. H., & Atiq, S. (2019) · Electrical Engineering · doi:10.1007/s00202-019-00772-2 · Cited by 23
A Study of Rotational Movement and Charging Torque of Reconfigured On-Board Charger
Xiao, Y., & Liu, C. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2979349 · Cited by 23
Multiphase Interleaved Bidirectional DC-DC Converter for Electric Vehicles and Smart Grid Applications
Sahbani, A., Cherif, K., & Saad, K. B. (2020) · International Journal of Smart grid · doi:10.20508/ijsmartgrid.v4i2.102.g86 · Cited by 23
Self-Excited Synchronous Machine Using Airgap Harmonics
Lin, C., Pathmanathan, M., Rodriguez, P., Bertoldi, F., Kabir, M. A., Janhunen, T., & Paloheimo, P. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3008375 · Cited by 23
Numerical Energy Analysis of In-Wheel Motor Driven Autonomous Electric Vehicles
Shen, K., Ke, X., Yang, F., Wang, W., Zhang, C., & Yuan, C. Y. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3236894 · Cited by 25
Analysis of Wheel Hub Motor Drive Application in Electric Vehicles
Sun, Y., Li, M., & Liao, C. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201710001004 · Cited by 23
A New Axial Flux Permanent Magnet Machine
Ojaghlu, P., & Vahedi, A. (2017) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2017.2769038 · Cited by 23
Study on Regenerative Energy Recovery of Electric Vehicle Through Voltage Control Using Switched Capacitor
Jung, S.-C., & Ko, J.-S. (2021) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2021.3073148 · Cited by 22
Concurrent design optimization of powertrain component modules in a family of electric vehicles
Clemente, M., Salazar, M., & Hofman, T. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124840 · Cited by 24
Comparative Analysis of 2-Level and 3-Level Voltage Source Inverters in Traction Applications
Wang, Y., Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec51675.2021.9490160 · Cited by 22
Overview of Sensitivity Analysis Methods Capabilities for Traction AC Machines in Electrified Vehicles
Asef, P., & Lapthorn, A. (2021) · IEEE Access · doi:10.1109/access.2021.3056933 · Cited by 21
A New Reference Flux Linkage Selection Technique for Efficiency Improvement of Direct Torque Controlled IM Drive
Prabhakar, K. K., Reddy, C. U., Kumar, P., & Singh, A. K. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2979235 · Cited by 21
Comparison of Different Winding Configurations for Dual Three-Phase Interior PM Machines in Electric Vehicles
Wang, S., Zhu, Z. Q., Pride, A., Shi, J., Deodhar, R. P., & Umemura, C. (2022) · World Electric Vehicle Journal · doi:10.3390/wevj13030051 · Cited by 21
A Fast On-Board Integrated Battery Charger for EVs Using an Asymmetrical Six-Phase Machine
Subotić, I., LEVI, E., & Bodo, N. (2014) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2014.7006996 · Cited by 21
Optimal Current Control Of Externally Excited Synchronous Machines In Automotive Traction Drive Applications
Haala, O., Wagner, B., Hofmann, M., & März, M. (2013) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1087599 · Cited by 20
An Improved Reactive Power MRAS Speed Estimator With Optimization for a Hybrid Electric Vehicles Application
Flah, A., Novák, M., & Sbita, L. (2018) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4039212 · Cited by 20
Electric Vehicle Acceleration Performance and Motor Drive Cycle Energy Efficiency Trade-Off
Grunditz, E. A., & Thiringer, T. (2018) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2018.8507201 · Cited by 20
Design and Optimization of Electric Cars. A Review of Technological Advances
Altun, F., Tekin, S. A., Gürel, S., & Cernat, M. (2019) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera47325.2019.8996516 · Cited by 20

Authors: de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M.
Affiliations: Uppsala University (SE)
ORCID: de Santiago, Juan
Bernhoff, Hans
Eriksson, Sandra
Leijon, Mats
Venue: IEEE Transactions on Vehicular Technology
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Published: 2012-02
Volume: 61
Issue: 2
Pages: 475-484
ISSN: 0018-9545 (ISSN-L)
1939-9359
DOI: 10.1109/tvt.2011.2177873
OpenAlex: W1966845491
Cited by: 669
References: 87
Citations by year: 2026: 22 · 2025: 38 · 2024: 49 · 2023: 58 · 2022: 57 · 2021: 69 · 2020: 93 · 2019: 52 · 2018: 34 · 2017: 38 · 2016: 54 · 2015: 31 · 2014: 45 · 2013: 20 · 2012: 9
FWCI: 16.58
Type: journal article
Language: en
Open access: green
urn.kb.se
Licence: other-oa
ieeexplore.ieee.org/Xplorehelp/downloads/license-information/IEEE.html (vor)
doi.org/10.15223/policy-029 (stm-asf)
doi.org/10.15223/policy-037 (stm-asf)
Locations: IEEE Transactions on Vehicular Technology (publishedVersion)
KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
Funders: VINNOVA
Stiftelsen Olle Engkvist Byggmästare
Vetenskapsrådet (621-2009-3417)
Energimyndigheten (621-2009-3417)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
Keywords: all-electric vehicles, induction motor, permanent magnet motor, electric commercial vehicles, motor comparison, motor testing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks