The DOI matches its Crossref record.
ASME International Mechanical Engineering Congress and Exposition
Abstract
We developed a distributed-parameter model (partial differ-ential equations and associated boundary conditions) that de-scribe the coupled torsion and bending motions of the Digital Micromirror Device (DMD) using the extended Hamilton prin-ciple. The work done by the electrostatic field is expressed in the form of a potential energy. It is found that coupling between the torsion and bending motions appears in the boundary con-ditions. The nonlinearity is mainly due to the application of the electrostatic forces and moments. Nonlinear terms appear only in the boundary conditions. The developed model provides a basis for a thorough study of the static and dynamic behaviors of the electromechanical device. The static response of the DMD for different DC loads shows the occurrence of pull-in (snap-down) instability at critical voltage values corresponding to the collapse of the yoke to mechanical stops. Estimates of the voltage, an-gle, and deflection at pull-in are given. The dynamic behavior of the DMD is analyzed by plotting the natural frequencies versus the applied DC voltage. We conducted a study of the sensitivity of the static and dynamic behaviors of the micromirror to vari-ations in the geometric parameters of the DMD. It is found that the thickness and width of the hinges are the key parameters in-∗Address all correspondence to this author
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Review of biodiesel composition, properties, and specifications
Hoekman, S. K., Broch, A., Robbins, C., Ceniceros, E., & Natarajan, M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.143 · Cited by 2,010
Droplet mobility on lubricant-impregnated surfaces
Smith, J. D., Dhiman, R., Anand, S., Reza-Garduno, E., Cohen, R. E., McKinley, G. H., & Varanasi, K. K. (2013) · Soft Matter · doi:10.1039/c2sm27032c · Cited by 994
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
Thermal conductivity and particle agglomeration in alumina nanofluids: Experiment and theory
Timofeeva, E. V., Gavrilov, A. N., McCloskey, J. M., Tolmachev, Y. V., Sprunt, S., Lopatina, L. M., & Selinger, J. V. (2007) · Physical Review E · doi:10.1103/physreve.76.061203 · Cited by 784
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Microbial fuel cells: An overview of current technology
Slate, A. J., Whitehead, K. A., Brownson, D. A. C., & Banks, C. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.09.044 · Cited by 725
Habibi Khalaj, A., & Halgamuge, S. K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.037 · Cited by 707
Agarose-based biomaterials for tissue engineering
Zarrintaj, P., Manouchehri, S., Ahmadi, Z., Saeb, M. R., Urbanska, A. M., Kaplan, D. L., & Mozafari, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.060 · Cited by 687
Ebbesen, S. D., Jensen, S. H., Hauch, A., & Mogensen, M. B. (2014) · Chemical Reviews · doi:10.1021/cr5000865 · Cited by 636
Lee, C., Kim, M., Kim, Y. J., Hong, N., Ryu, S., Kim, H. J., & Kim, S. (2017) · International Journal of Control, Automation and Systems · doi:10.1007/s12555-016-0462-3 · Cited by 616
Review of spray cooling – Part 1: Single-phase and nucleate boiling regimes, and critical heat flux
Liang, G., & Mudawar, I. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.029 · Cited by 609
Digital twin-driven intelligent assessment of gear surface degradation
Feng, K., Ji, J. C., Zhang, Y., Ni, Q., Liu, Z., & Beer, M. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109896 · Cited by 542
Soudagar, M. E. M., Nik-Ghazali, N.-N., Abul Kalam, M., Badruddin, I. A., Banapurmath, N. R., & Akram, N. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.019 · Cited by 528
Oxyfuel combustion for CO2 capture in power plants
Stanger, R., Wall, T., Spörl, R., Paneru, M., Grathwohl, S., Weidmann, M., Scheffknecht, G., McDonald, D., Myöhänen, K., Ritvanen, J., et al. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.06.010 · Cited by 492
Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 491
Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology
Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100014 · Cited by 484
Tahan, M., Tsoutsanis, E., Muhammad, M., & Abdul Karim, Z. A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.048 · Cited by 482
A review of safety-focused mechanical modeling of commercial lithium-ion batteries
Zhu, J., Wierzbicki, T., & Li, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.034 · Cited by 482
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
Vibration energy harvesting in automotive suspension system: A detailed review
Abdelkareem, M. A. A., Xu, L., Ali, M. K. A., Elagouz, A., Mi, J., Guo, S., Liu, Y., & Zuo, L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.030 · Cited by 441
Human Digital Twin in the context of Industry 5.0
Wang, B., Zhou, H., Li, X., Yang, G., Zheng, P., Song, C., Yuan, Y., Wuest, T., Yang, H., & Wang, L. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102626 · Cited by 424
Digital Twin applications toward Industry 4.0: A Review
Javaid, M., Haleem, A., & Suman, R. (2023) · Cognitive Robotics · doi:10.1016/j.cogr.2023.04.003 · Cited by 421
Design of compliant mechanisms using continuum topology optimization: A review
Zhu, B., Zhang, X., Zhang, H., Liang, J., Zang, H., Li, H., & Wang, R. (2020) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2019.103622 · Cited by 417
Modelling and simulation of a proton exchange membrane (PEM) electrolyser cell
Abdin, Z., Webb, C. J., & Gray, E. M. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.07.129 · Cited by 406
Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials
Akaydin, H. D., Elvin, N., & Andreopoulos, Y. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10366317 · Cited by 385
Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Analyzing the potential of Virtual Reality for engineering design review
Wolfartsberger, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.018 · Cited by 345
A review of agile manufacturing systems
Sanchez, L. M., & Nagi, R. (2001) · International Journal of Production Research · doi:10.1080/00207540110068790 · Cited by 337
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Modeling and Experimental Characterization of an Untethered Magnetic Micro-Robot
Pawashe, C., Floyd, S., & Sitti, M. (2009) · The International Journal of Robotics Research · doi:10.1177/0278364909341413 · Cited by 318
Zafar, M. H., Langås, E. F., & Sanfilippo, F. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2024.102769 · Cited by 315
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
A literature review of powder-based electron beam melting focusing on numerical simulations
Galati, M., & Iuliano, L. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.001 · Cited by 300
Bhatnagar, S., Dave, K., & Venuganti, V. V. K. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.05.029 · Cited by 297
Rahman, M. A., Anwar, S., & Izadian, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.083 · Cited by 289
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Tan, M. J., Owh, C., Chee, P. L., Kyaw, A. K. K., Kai, D., & Loh, X. J. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00678g · Cited by 288
Towards future infrastructures for sustainable multi-energy systems: A review
Guelpa, E., Bischi, A., Verda, V., Chertkov, M., & Lund, H. (2019) · Energy · doi:10.1016/j.energy.2019.05.057 · Cited by 277
Noise and vibration suppression in hybrid electric vehicles: State of the art and challenges
Qin, Y., Tang, X., Jia, T., Duan, Z., Zhang, J., Li, Y., & Zheng, L. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109782 · Cited by 272
Yin, Y., Zheng, P., Li, C., & Wang, L. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102515 · Cited by 271
Mohammadi, A., Ahmadi, M. H., Bidi, M., Joda, F., Valero, A., & Uson, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.11.003 · Cited by 267
Chen, A. F., Akmal Adzmi, M., Adam, A., Othman, M. F., Kamaruzzaman, M. K., & Mrwan, A. G. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.004 · Cited by 262
Gupta, A., O'Malley, M. K., Patoglu, V., & Burgar, C. (2008) · The International Journal of Robotics Research · doi:10.1177/0278364907084261 · Cited by 255
Ramakrishnan, S., Wang, X., Sanjayan, J., & Wilson, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.04.084 · Cited by 241
A Review of Simulation Methods in Micro/Nanoscale Heat Conduction
University of Michigan-Shanghai Jiao Tong University Joint Institute, S. J. T. U., Bao, H., Chen, J., Center for Phononics and Thermal Energy Science, S. O. P. S. A. E., Gu, X., Institute of Engineering Thermophysics, S. O. M. E., Cao, B., & Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, D. O. E. M. (2018) · ES Energy & Environment · doi:10.30919/esee8c149 · Cited by 225
Jamil, H., Alam, M., Sanjayan, J., & Wilson, J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.064 · Cited by 136
Preist, C., Schien, D., & Blevis, E. (2016) · Proceedings of the 2016 CHI Conference on Human Factors in Computing Systems · doi:10.1145/2858036.2858378 · Cited by 133
Carrico, J. D., Tyler, T., & Leang, K. K. (2017) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2018.1438534 · Cited by 78
Arabi, M., Yaghoubi, S., & Tajik, J. (2019) · Energy · doi:10.1016/j.energy.2019.04.219 · Cited by 65
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Queiruga-Dios, M., Santos Sánchez, M. J., Queiruga-Dios, M. Á., Acosta Castellanos, P. M., & Queiruga-Dios, A. (2021) · Frontiers in Psychology · doi:10.3389/fpsyg.2021.629231 · Cited by 47
Genetic and developmental origins of a unique foraging adaptation in a Lake Malawi cichlid genus
Conith, M. R., Hu, Y., Conith, A. J., Maginnis, M. A., Webb, J. F., & Albertson, R. C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719798115 · Cited by 41
A pseudo three-dimensional, two-phase, non-isothermal model of proton exchange membrane fuel cell
Rizvandi, O. B., & Yesilyurt, S. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.02.018 · Cited by 33
Manaserh, Y. M., Tradat, M. I., Hoang, C. H., Sammakia, B. G., Ortega, A., Nemati, K., & Seymour, M. J. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121291 · Cited by 31
Shafique, A., Mehmood, A., Elhadef, M., & khan, K. H. (2022) · PLOS ONE · doi:10.1371/journal.pone.0273661 · Cited by 23
Metadata
- Venue
- The Journal of the Acoustical Society of America
- Publisher
- Acoustical Society of America (ASA)
- Published
- 2001-06-01
- Volume
- 109
- Issue
- 6
- Pages
- 2541-2541
- ISSN
- 0001-4966 (ISSN-L)
- 1520-8524
- OpenAlex
- W4255909237
- Cited by
- 2,619
- References
- 0
- Type
- other
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.