CoChat

Photonic skins based on flexible organic microlaser arrays

Open access

The DOI matches its Crossref record; 54 of the 55 references it cites were found in a registry or an index.

Abstract

Smart photonic skins based on flexible organic microlaser chips can be used for gesture recognition.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.abh3530

Cites

54 of 54 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Concept of artificial photonic skin system based on organic microlaser array. The outcoupling of organic microcavity lasers is dependent on the substrate deformation, and the two-dimensional array of these mechanical sensors on a flexible chip enables spatially resolved detection of local deformations. The photonic ship of flexible sensor network can distinguish diverse external forces and serve as smart photonic skins.
Fig. 1 Concept of artificial photonic skin system based on organic microlaser array. The outcoupling of organic microcavity lasers is dependent on the substrate deformation, and the two-dimensional array of these mechanical sensors on a flexible chip enables spatially resolved detection of local deformations. The photonic ship of flexible sensor network can distinguish diverse external forces and serve as smart photonic skins.CC BY-NC · PubMed Central
Fig. 2 Fabrication of large-scale organic flexible photonic chip. (A) Schematic illustration for the fabrication procedures of a pillar-supported microdisk array on a flexible substrate. Low–molecular mass PMMA and dye-doped high–molecular mass PMMA were successively spin-coated on the flexible substrate. In the EBDW process, the low–molecular mass PMMA experienced a more complete chain scission due to the molecular mass–dependent sensitivity to electron beam. After developing, the array of organic microdisks with pedestals was obtained on the flexible substrate. (B) Photograph of a patterned transparent photonic chip (4 cm by 4 cm) under bending. (C) Bright-field microscopy image of large-scale ordered pillar-supported microdisks on the flexible photonic chip. Scale bar, 20 μm. (D) Side-view SEM image of a single microdisk positioned on top of a pillar. Scale bar, 2 μm. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.
Fig. 2 Fabrication of large-scale organic flexible photonic chip. (A) Schematic illustration for the fabrication procedures of a pillar-supported microdisk array on a flexible substrate. Low–molecular mass PMMA and dye-doped high–molecular mass PMMA were successively spin-coated on the flexible substrate. In the EBDW process, the low–molecular mass PMMA experienced a more complete chain scission due to the molecular mass–dependent sensitivity to electron beam. After developing, the array of organic microdisks with pedestals was obtained on the flexible substrate. (B) Photograph of a patterned transparent photonic chip (4 cm by 4 cm) under bending. (C) Bright-field microscopy image of large-scale ordered pillar-supported microdisks on the flexible photonic chip. Scale bar, 20 μm. (D) Side-view SEM image of a single microdisk positioned on top of a pillar. Scale bar, 2 μm. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.CC BY-NC · PubMed Central
Fig. 3 Mechanically robust flexible organic microlaser array. (A) Fluorescence microscopy image of an ordered dye-doped microdisk array under ultraviolet excitation. The brighter emission along the ring-shaped boundary demonstrates the efficient optical confinement in the microdisk. Scale bar, 15 μm. (B) Emission spectra from an individual microdisk excited at different pump fluences, showing an obvious transition from broad spontaneous emission to multimode lasing oscillation. a.u., arbitrary units. (C) Corresponding power-dependent emission intensities from the microdisk laser. The red lines represent the linear fits to the experimental data indicating a clear knee behavior at the threshold of ~11.03 μJ/cm2. (D) Photograph of a flexible photonic chip loaded on a motorized bending stage for in situ measurements of laser characteristics. (E) Lasing spectra from the same microdisk resonator under different bending radii. (F) The emission intensities and mode positions of the microdisk laser measured during 5000 cycles of applied bending. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.
Fig. 3 Mechanically robust flexible organic microlaser array. (A) Fluorescence microscopy image of an ordered dye-doped microdisk array under ultraviolet excitation. The brighter emission along the ring-shaped boundary demonstrates the efficient optical confinement in the microdisk. Scale bar, 15 μm. (B) Emission spectra from an individual microdisk excited at different pump fluences, showing an obvious transition from broad spontaneous emission to multimode lasing oscillation. a.u., arbitrary units. (C) Corresponding power-dependent emission intensities from the microdisk laser. The red lines represent the linear fits to the experimental data indicating a clear knee behavior at the threshold of ~11.03 μJ/cm2. (D) Photograph of a flexible photonic chip loaded on a motorized bending stage for in situ measurements of laser characteristics. (E) Lasing spectra from the same microdisk resonator under different bending radii. (F) The emission intensities and mode positions of the microdisk laser measured during 5000 cycles of applied bending. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.CC BY-NC · PubMed Central
Fig. 4 Organic photonic flexible mechanical sensor array. (A) Design principle of a mechanical sensor comprising a coupled microdisk laser and a cantilever-supported microwire waveguide. The microwire was coupled with the single-mode laser to efficiently deliver the sensing signal. The gap and, consequently, the coupling efficiency between the microdisks and waveguide can change with the bending in substrate, which finally determines the laser output intensity from the microwire tip. According to the variations in output intensities, the flexible coupled wire-disk sensor can detect the mechanical deformations in the flexible chip. (B) Bright-field microscopy image of coupled microdisks. Scale bar, 20 μm. (C) Output spectra from a pair of coupled microdisks at different pump fluences, exhibiting well-defined single-wavelength lasing. Inset, PL microscopy image of the coupled microdisks. Scale bar, 10 μm. (D) Corresponding power-dependent emission intensities from the coupled microdisks, which reveals a threshold value of 8.74 μJ/cm2. (E) Bright-field microscopy image of a flexible mechanical sensor array. Scale bar, 20 μm. (F) SEM image of a typical mechanical sensor unit. Scale bar, 10 μm. (G) Bright-field microscopy image of a typical mechanical sensor. The orange arrow indicates the bending direction. Scale bar, 10 μm. Insets, magnified microscopy images of the wire-disk gaps in the mechanical sensor under different bending radii. Scale bar, 5 μm. (H) Emission spectra from the mechanical sensor collected from the tip of the suspended microwire under different bending radii.
Fig. 4 Organic photonic flexible mechanical sensor array. (A) Design principle of a mechanical sensor comprising a coupled microdisk laser and a cantilever-supported microwire waveguide. The microwire was coupled with the single-mode laser to efficiently deliver the sensing signal. The gap and, consequently, the coupling efficiency between the microdisks and waveguide can change with the bending in substrate, which finally determines the laser output intensity from the microwire tip. According to the variations in output intensities, the flexible coupled wire-disk sensor can detect the mechanical deformations in the flexible chip. (B) Bright-field microscopy image of coupled microdisks. Scale bar, 20 μm. (C) Output spectra from a pair of coupled microdisks at different pump fluences, exhibiting well-defined single-wavelength lasing. Inset, PL microscopy image of the coupled microdisks. Scale bar, 10 μm. (D) Corresponding power-dependent emission intensities from the coupled microdisks, which reveals a threshold value of 8.74 μJ/cm2. (E) Bright-field microscopy image of a flexible mechanical sensor array. Scale bar, 20 μm. (F) SEM image of a typical mechanical sensor unit. Scale bar, 10 μm. (G) Bright-field microscopy image of a typical mechanical sensor. The orange arrow indicates the bending direction. Scale bar, 10 μm. Insets, magnified microscopy images of the wire-disk gaps in the mechanical sensor under different bending radii. Scale bar, 5 μm. (H) Emission spectra from the mechanical sensor collected from the tip of the suspended microwire under different bending radii.CC BY-NC · PubMed Central
Fig. 5 Mechanical sensor network for gesture recognition. (A) Working principle of flexible mechanical sensors for gesture recognition. (B) Image of the model hand with flexible photonic chips attached on the fingers as the hand gesture monitor. The orange arrow indicates the coupling direction of the mechanical sensor. (C) Photograph of a flexible photonic chip of mechanical sensors. With high flexibility, the mechanical sensor chip can conform to the model hand. The mechanical sensor located at the knuckle region would show a signal change when the finger becomes flexion. (D) PL image of the large-scale mechanical sensor array on a Kapton substrate. By measuring the signal change at the tip of the microwire, we can deduce the deformation of the flexible chip and, thus, the movement of the finger. Scale bar, 50 μm. (E) Two-dimensional color map of the sensing signal intensities under different hand gestures. All laser signal intensities collected from each sensor chip are normalized by the original signal intensity when the finger extends. The strong and weak signal outputs at the microwire tip indicate the finger extension and flexion, respectively. Various hand gestures can be recognized with five flexible sensor chips monitoring the movements of the finger. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.
Fig. 5 Mechanical sensor network for gesture recognition. (A) Working principle of flexible mechanical sensors for gesture recognition. (B) Image of the model hand with flexible photonic chips attached on the fingers as the hand gesture monitor. The orange arrow indicates the coupling direction of the mechanical sensor. (C) Photograph of a flexible photonic chip of mechanical sensors. With high flexibility, the mechanical sensor chip can conform to the model hand. The mechanical sensor located at the knuckle region would show a signal change when the finger becomes flexion. (D) PL image of the large-scale mechanical sensor array on a Kapton substrate. By measuring the signal change at the tip of the microwire, we can deduce the deformation of the flexible chip and, thus, the movement of the finger. Scale bar, 50 μm. (E) Two-dimensional color map of the sensing signal intensities under different hand gestures. All laser signal intensities collected from each sensor chip are normalized by the original signal intensity when the finger extends. The strong and weak signal outputs at the microwire tip indicate the finger extension and flexion, respectively. Various hand gestures can be recognized with five flexible sensor chips monitoring the movements of the finger. Photo credit: Chunhuan Zhang; Institute of Chemistry, Chinese Academy of Sciences.CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 98

Metadata

Authors
Zhang, C., Dong, H., Zhang, C., Fan, Y., Yao, J., & Zhao, Y. S.
Affiliations
Chinese Academy of Sciences (CN)
Corresponding author
  • Zhang, Chunhuan
  • Dong, Haiyun
  • Zhao, Yong Sheng
Venue
Science Advances
Published
2021-07-30
Volume
7
Issue
31
ISSN
2375-2548 (ISSN-L)
OpenAlex
W3185052184
Cited by
98
References
55
Citations by year
2026: 8 · 2025: 24 · 2024: 21 · 2023: 19 · 2022: 17 · 2021: 9
FWCI
5.01
Type
journal article
Language
en
Open access
Locations
  • Science Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Funders
  • National Natural Science Foundation of China (21790364, 51903238, 22090023)
  • Ministry of Science and Technology of the People's Republic of China (2017YFA0204502)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
Keywords
flexible photonics, artificial skin, mechanical sensors, coupled-cavity lasers, single-mode laser, electron beam direct writing, hand gesture recognition, scalable device fabrication

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.