A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 1,001–1,100 of 2,542
Tang, Z., Ji, Y., Yu, P., & Cheng, J. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107499 · Cited by 19
Proposing a Hybrid BTMS Using a Novel Structure of a Microchannel Cold Plate and PCM
Rabiei, M., Gharehghani, A., Saeedipour, S., Andwari, A. M., & Könnö, J. (2023) · Energies · doi:10.3390/en16176238 · Cited by 24
Sirikasemsuk, S., Eiamsa-ard, S., Sirijaroenpanitch, A., & Naphon, P. (2023) · Engineered Science · doi:10.30919/es1017 · Cited by 38
Mavi, A., & Arslan, O. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109964 · Cited by 20
The electro-thermal behaviors of the lithium-ion batteries corroded by the salt spray environment
Liu, J., Shi, X., Yang, M., & Chen, H. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.143715 · Cited by 21
Xiong, R., Li, X., Li, H., Zhu, B., & Avelin, A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110387 · Cited by 20
A cloud capacity estimation method for electric vehicle lithium-ion battery independent of cloud SOC
Shao, Y., Zheng, Y., Zhang, J., Han, X., Jin, B., & Sun, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110998 · Cited by 21
Optimized design of liquid-cooled plate structure for flying car power battery system
Wang, Z., Guan, Q., Zhang, H., Wu, X., & Yu, D. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112720 · Cited by 21
Heat dissipation structure research for rectangle LiFePO4 power battery
Zhang, Y., Guoqing, Z., Wu, W., et al. (2014) · Heat and Mass Transfer · doi:10.1007/s00231-013-1284-y · Cited by 20
Xu, X., Lin, Y., Wang, F., Yang, S., & Zhou, Z. (2019) · International Journal of Green Energy · doi:10.1080/15435075.2019.1671423 · Cited by 21
“Bernardi, Pawlikowski, and Newman (1985) proposed a general heat generation rate equation for a battery as expressed by Q ¼ i U Vð Þ i T @U @T þ enthalpy of mixing term þphase change term (12) In this paper, the last three terms in (12) are neglected for simplification (Gu and Wang 2000).”
BackgroundEntropy generation model to estimate battery ageing
Cuadras, Á., Jané, P. M., Ovejas, V. J., & Estrany, F. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101740 · Cited by 20
Investigation of the Effective Thermal Conductivity of Cell Stacks of Li‐Ion Batteries
Oehler, D., Bender, J., Seegert, P., & Wetzel, T. (2020) · Energy Technology · doi:10.1002/ente.202000722 · Cited by 23
Li, Z., Tavakoli, F., El-Shafay, A. S., Liu, X., Mousa, M., & Heidarshenas, B. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231715 · Cited by 19
Sakti, A., Michalek, J. J., Chun, S., & Whitacre, J. F. (2012) · International Journal of Energy Research · doi:10.1002/er.2999 · Cited by 21
“Existing battery modeling and simulation literature includes work on the general energy balance of a battery system [1], the heat generation rate using the energy balance model [2], electrochemical-thermal modeling and experimental validation [3], and the simulation and optimization of lithium-ion battery systems [4]…”
MethodLiu, Z., Li, K., Zhang, W., Xie, Y., Liu, J., Sun, L., & Zan, J. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108563 · Cited by 19
Hu, J., Liu, T., & Wang, X. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.03.010 · Cited by 19
Wang, C. Y., & Leong, J. C. (2024) · Energies · doi:10.3390/en17071553 · Cited by 19
Li, H., Wang, Y., Li, W., Guo, J., & Gui, A. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124921 · Cited by 21
Liu, F., Liu, X., Su, W., & Bu, F. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125430 · Cited by 24
Numerical investigation on gradient liquid cooling plate of lithium-ion battery pack
Shen, J., Yu, S., Shen, S., Liu, Y., Xia, X., Wei, F., & Chen, Z. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126789 · Cited by 19
Boretti, A. A. (2025) · Energy Storage · doi:10.1002/est2.70273 · Cited by 29
Investigation of porous media effects on lithium-ion battery thermal management
Kaabinejadian, A., Ahmadi, H. A., & Moghimi, M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09661-4 · Cited by 18
Çelen, A., & Kalkan, O. (2020) · Energy Storage · doi:10.1002/est2.216 · Cited by 19
Xu, G., Zhang, Y., Lou, S., Gu, J., & Huang, X. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118100 · Cited by 19
Li, W., Garg, A., Wang, N., Gao, L., Le, P. M. L., & Tran, V. M. (2022) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4054648 · Cited by 20
Li, Y., Bai, M., Zhou, Z., Wu, W., Gao, L., Li, Y., Yang, Y., Li, Y., & Song, Y. (2023) · International Journal of Energy Research · doi:10.1155/2023/8207527 · Cited by 20
“In equation (13), I / Vol ½ V OCV − ð ϕ + − ϕ − Þ denotes polarization heat, and − ð I / Vol Þ T ð dU/dT Þ denotes the reaction heat [47, 48].”
Zhang, L., Yu, W., Wang, J., Gao, D., Chen, Y., Dai, W., Wang, P., Li, G., Meng, C., Liu, C., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213846 · Cited by 22
Shrinet, E. S., Mukherjee, A., & Kumar, L. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108332 · Cited by 19
Capasso, C., Iannucci, L., Patalano, S., Veneri, O., & Vitolo, F. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109971 · Cited by 25
Battery Temperature Prediction Using an Adaptive Neuro-Fuzzy Inference System
Zhang, H., Fotouhi, A., Auger, D. J., & Lowe, M. (2024) · Batteries · doi:10.3390/batteries10030085 · Cited by 24
Research progress in battery thermal management system under vessel working conditions
Wu, Y., Yang, B. F., Zhang, X., & Ying, S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112761 · Cited by 24
Vikram, S., Vashisht, S., Rakshit, D., & Wan, M. P. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115678 · Cited by 18
Thermal Characterization of LiNi0.8Co0.15Al0.05O2/Graphite Battery
Tran, T.-H., Harmand, S., Desmet, B., & Pailhoux, F. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044306jes · Cited by 19
Chu, H. N., Kim, S. U., Rahimian, S. K., Siegel, J. B., & Monroe, C. W. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227787 · Cited by 21
“explored the thermal management problem, under the assumption that the temperature within a cell is locally uniform [28].”
BackgroundLi, C., Li, Y., Srinivaas, S., Zhang, J., Qu, S., & Li, W. (2021) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4050723 · Cited by 22
Thermal behavior of overcharged nickel/metal hydride batteries
Li, D., Yang, K., Chen, S., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.059 · Cited by 19
An improved lithium-ion battery model with temperature prediction considering entropy
Feng, X., Gooi, H. B., & Chen, S. X. (2012) · IEEE PES Innovative Smart Grid Technologies Europe · doi:10.1109/isgteurope.2012.6465668 · Cited by 21
“The following thermal dynamic equation is given in [15]:”
MethodElectrochemical and thermal behaviour of LiNi0.8Co0.2O2 cathode in sealed 18650 Li-ion cells
Lu, W., Lee, C. W., Venkatachalapathy, R., et al. (2000) · Journal of Applied Electrochemistry · doi:10.1023/a:1004043212325 · Cited by 19
(NNSA), U. N. N. S. A., Fuller, T. F., Sandia National Laboratories (SNL-NM), A., et al. (2012) · doi:10.2172/1038186 · Cited by 19
“Bernardi et al. (1985) derived an expression for battery heat using a thermodynamic energy balance on a complete cell.”
MethodOptimal design and control strategy for enhanced battery thermal management
Liu, Z., Du, X., & Xiong, C. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113932 · Cited by 18
Chen, Y., & Hu, Z. (2025) · Energies · doi:10.3390/en18030484 · Cited by 24
Es-Satte, M., Afaynou, I., Faraji, H., Choukairy, K., Regragui, I., Amghar, K., Boucetta, M., Saadeddine, S., & Bourich, M. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.110870 · Cited by 29
Dong, F., Cheng, Z., Song, D., & Ni, J. (2021) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2021.1947110 · Cited by 18
“According to the Bernardi [21] heat generation model, the heat generation rate of the lithium-”
MethodInfluentialSystem dynamics and metrics of an electrochemical refrigerator based on the Brayton cycle
Rajan, A., & Yee, S. K. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100774 · Cited by 18
Ajour, M. N., Milyani, A. H., Abu‐Hamdeh, N. H., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104759 · Cited by 18
RetractedPeng, D., Xiaoyonga, G., Wang, Y., Jiacheng, X., Mengqiang, S., & Li, K. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121352 · Cited by 19
Napa, N., Agrawal, M. K., & Tamma, B. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122233 · Cited by 22
Numerical studies on topological design of cold plate for a cell-to-pack battery system
Luo, T., Wang, Q., Dai, L., Dang, X., He, Z., & Ji, H. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122715 · Cited by 21
Chen, Z., & Zhang, F. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110935 · Cited by 19
Online Sensorless Temperature Estimation of Lithium-Ion Batteries Through Electro-Thermal Coupling
Zheng, Y., Che, Y., Hu, X., Sui, X., & Teodorescu, R. (2024) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2024.3367291 · Cited by 19
“The heat generation inside the battery consists of several heat sources, and a simplified model derived by Bernardi et al. [34] can be used to calculate heat generation, which is given by in which the first term on the right-hand side denotes the irreversible heat of the cell and the second term…”
Leng, M., Liu, K., Gao, Y., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112682 · Cited by 18
Thermo-electrochemical study on LiMn2O4 lithium-ion cells during charge–discharge process
Song, L., Xiao, Z., & Zhou, Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.105 · Cited by 18
Controllable Electrode Stochasticity Self-Heats Lithium-Ion Batteries at Low Temperatures
Mistry, A. N., Verma, A., & Mukherjee, P. P. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05468 · Cited by 18
Youssef, R., Hosen, M. S., He, J., Jaguemont, J., Akbarzadeh, M., Sutter, L. D., Mierlo, J. V., & Berecibar, M. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3108757 · Cited by 20
“2(a) and depending on the simplified form of Bernardi’s equation [25], which can be expressed as follows:”
BackgroundResearches on heating low-temperature lithium-ion power battery in electric vehicles
Li, J., Wu, P., & Tian, H. (2014) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2014.6941276 · Cited by 26
(2010) · Cited by 18
Sirikasemsuk, S., Naphon, N., & Naphon, P. (2023) · Heat Transfer Engineering · doi:10.1080/01457632.2023.2249733 · Cited by 17
“[62] as follows: k bl ¼ 1 (cid:0) ffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffi p � During the operation, the two heat modes are generated [54].”
MethodYang, J., Yu, Q., Chen, S., Luo, M., Du, W., Yu, Y., Wu, Y., Zhou, W., & Zhou, Z. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124722 · Cited by 17
Model Construction and Dominant Mechanism Analysis of Li-Ion Batteries under Periodic Excitation
Wang, Z., Zhou, X., Sun, B., Zhang, W., Su, X., Shi, J., & Huang, Q. (2024) · Space Science & Technology · doi:10.34133/space.0129 · Cited by 27
He, H., Fly, A., Barbour, E. R., & Chen, X. (2024) · Communications Engineering · doi:10.1038/s44172-024-00222-3 · Cited by 22
Meng, D., Wang, X., Hu, W., Zhao, C., & Wang, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113102 · Cited by 18
Yang, J., Yu, Q., Ye, W., Yu, Y., & Chen, S. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.11.038 · Cited by 20
Ouyang, D., Huang, J. W., Zheng, Y., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126616 · Cited by 17
Gan, H., Tian, J., Wang, X., et al. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127234 · Cited by 17
Thermal management of 4680 battery cells: Cell design and cooling concept
Allgäuer, C., Grenz, F., Gamra, K. A., & Lienkamp, M. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117318 · Cited by 28
Jiang, Z., Zhang, Y., & Gao, R. (2025) · Energy · doi:10.1016/j.energy.2025.137486 · Cited by 20
Verma, A., Saikia, P., & Rakshit, D. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104184 · Cited by 15
Study on dual flow medium system for battery thermal management of electric vehicle
Jin, S. P., Gao, Q., Gao, X., et al. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.102023 · Cited by 17
Cheng, S., Hu, Y., Jiang, L., et al. (2022) · Fire Technology · doi:10.1007/s10694-022-01305-3 · Cited by 17
“According to the frequently used equation by Bernardi [18], heat generation of the battery in cycling can be described by Equation (2), in which, the heat of mixing and side reactions were neglected.”
MethodKalkan, O., Çelen, A., & Bakirci, K. (2023) · Heat Transfer Research · doi:10.1615/heattransres.2023045466 · Cited by 17
Swamy, K. A., Verma, S., & Mittal, L. (2023) · Heat Transfer Engineering · doi:10.1080/01457632.2023.2295082 · Cited by 18
Wang, S., Zhang, T., Gao, Q., et al. (2024) · Engineering Applications of Computational Fluid Mechanics · doi:10.1080/19942060.2023.2301058 · Cited by 17
“The battery heat production rate is computed using the heat generation model developed by Bernardi et al. (1985), as shown in Equation (4), which considers the battery as a uniform heat source.”
Paul, A., Magee, R., Wilczewski, W., Wichert, N., Gula, C., Olson, R. A., Shereda, E., Al-Majali, Y. T., Trembly, J., Wolfe, K. D., et al. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad2061 · Cited by 18
A comprehensive assessment of emerging trends in battery thermal management systems
Bhosale, A. J., Deshmukh, V. N., & Chaudhari, M. B. (2024) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-024-04735-y · Cited by 18
“Bernardi et al. [41] proposed an equation for heat generation for the prediction of rate of heat generated in one cell: In Eq.”
A phase-based method for estimating the internal temperature of solid-state battery
Yang, R., Li, K., Xie, Y., Fan, Y., Liu, B., & Deng, Z. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111007 · Cited by 18
Lei, D., Wang, Y., Fu, J., Zhu, X., Shi, J., & Wang, Y. (2024) · Energy · doi:10.1016/j.energy.2024.132629 · Cited by 18
Khasawneh, H. J., & Illindala, M. S. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2369815 · Cited by 17
Yin, Y., Zheng, Z., & Choe, S.-Y. (2017) · SAE International journal of alternative powertrains · doi:10.4271/2017-01-1213 · Cited by 17
“When battery is charged and discharged, the battery’s temperature varies due to the internal heat generation [4,5] Heat generation in lithium ion battery consists of two main parts, the reversible heat generated by the change of entropy at a given cell temperature and irreversible heat generated by Joule heat, charge-…”
BackgroundThermal management of batteries
Sunden, B. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816950-6.00006-3 · Cited by 28
Chen, L., Jiang, L., Wang, Q., et al. (2020) · Fire Technology · doi:10.1007/s10694-020-00956-4 · Cited by 17
Schmid, F. C., Winzer, J., Pasemann, A., & Behrendt, F. (2020) · Energy · doi:10.1016/j.energy.2020.119545 · Cited by 16
Guo, J., Liu, F., Xu, Y., Han, B., & Li, M. (2021) · Journal of Energy Engineering · doi:10.1061/(asce)ey.1943-7897.0000768 · Cited by 19
Ensemble Surrogate Models for Fast LIB Performance Predictions
Quartulli, M., Gil, A., Florez-Tapia, A. M., Cereijo, P., Ayerbe, E., & Olaizola, I. G. (2021) · Energies · doi:10.3390/en14144115 · Cited by 17
System-Level Modeling and Thermal Simulations of Large Battery Packs for Electric Trucks
Babu, A. R., Andrić, J. M., Minovski, B. B., & Sebben, S. (2021) · Energies · doi:10.3390/en14164796 · Cited by 17
“Bernardi’s model of heat generation [23] was used to estimate the heat generated from each module which reads: where ˙ Q is the heat generated, N mod is the number of cells in a module, I is the current, R int is the internal resistance of the cells in the module, T is the temperature of the…”
InfluentialNumerical Simulation of Manifold Microchannel Heat Sinks for Thermal Management in a Li‐Ion Battery
Pan, M., & Hu, M. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.202000316 · Cited by 18
Energy Storage Systems for Smart Grid Applications
Al-Hallaj, S., Wilke, S., & Schweitzer, B. (2017) · Water, Energy & Food Sustainability in the Middle East · doi:10.1007/978-3-319-48920-9_8 · Cited by 17
Liu, L., Xu, G., Wang, Y., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113941 · Cited by 16
Peng, A., Peng, F., Chen, Y., et al. (2025) · Energy · doi:10.1016/j.energy.2025.138458 · Cited by 16
Xu, Q., Xie, Y., Huang, H., et al. (2025) · Energy · doi:10.1016/j.energy.2025.138622 · Cited by 16
Traskunov, I., & Latz, A. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138144 · Cited by 16
Mohsin, I. U., Ziebert, C., Rohde, M., et al. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac0176 · Cited by 16
Li, B., Jones, C. M., & Tomar, V. (2021) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4051296 · Cited by 16
Research on performance of thermal management system integrated with multiple heat exchange methods
Zhang, L., Yuan, Q., Hu, S., & Xu, X. (2021) · Ionics · doi:10.1007/s11581-021-04334-0 · Cited by 16
Mahboubi, D., Gavzan, I. J., Saidi, M. H., & Ahmadi, N. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11422-4 · Cited by 18
“[8] established an ordinary energy equilibrium for battery systems.”
BackgroundA novel battery cooling system using nanofluids on MATLAB Simulink
Wankhede, S., & Kamble, L. (2022) · Energy Storage · doi:10.1002/est2.418 · Cited by 21
“A basic equation for the creation of heat in battery cells was established.(45) In this study, the heat generated is calculated using a condensed version of the Bernardi equation.”
MethodYang, R., Xie, Y., Li, K., et al. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3276982 · Cited by 16
“1) Resistance-Based Heat Generation Model: According to [20], the battery temperature stems from the combined effect of the electrochemical reactions, phase changes, mixing effects, and Joule heating.”
BackgroundElectrical–thermal–fluidic coupling Li-ion battery pack consistency study
Ran, Y., Su, Y., Yan, K., Jiang, X., Zhao, Y., Shen, X., Liu, X., Yang, X., Chen, L., & Wu, F. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108031 · Cited by 16
A strategy to assess the use-phase carbon footprint from energy losses in electric vehicle battery
Yang, B., Du, C., Zhang, H., Ma, X., Shen, X., Wang, D., Yu, Z., Huang, Q., Gao, D., Yin, Y., et al. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142569 · Cited by 17
Kong, D., Wang, G., & Wen, J. X. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.07.097 · Cited by 16
Zafar, M. H., Bukhari, S. M. S., Houran, M. A., Mansoor, M., Khan, N. M., & Sanfilippo, F. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105002 · Cited by 21
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.