A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 1,301–1,400 of 2,542
Wu, Y., Yan, Y., Zhang, C., et al. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.128281 · Cited by 10
Castro, M. T., & Ocon, J. D. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105305 · Cited by 12
Yu, R. P., Li, P., Wang, K., & Zhang, H. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acd083 · Cited by 11
Optimization of Lithium-Ion Battery Charging Strategies From a Thermal Safety Perspective
Wang, L., Song, Y., Lyu, C., Yang, D., Yang, G., & Shen, D. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3308484 · Cited by 9
“On the other hand, in the EKF for heat generation rate, the Bernardi equation [30] and the energy conservation equation are used as the state transition and measurement equations, respectively, where E ocv is the open circuit voltage, which is a function of the SoC; S is the entropy coefficient,…”
MethodHales, A., & Bulman, J. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad4918 · Cited by 10
Huang, Z., Wang, H., Zou, W., Zhang, R., Wang, Y., Chen, J., & Wu, S. (2024) · Energy · doi:10.1016/j.energy.2024.131877 · Cited by 11
Song, Y.-M., Liu, Y.-J., Zhou, X., Huang, X., Zhou, C., & Jin, G. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112567 · Cited by 8
Gao, Y., & Gao, Q. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104836 · Cited by 10
Han, C., Cheng, Y., Wang, Z., & Zheng, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114107 · Cited by 11
Zhao, Y., Zhang, T., Wang, C., Tang, Y., & Xi, H. (2024) · Science China Technological Sciences · doi:10.1007/s11431-024-2770-1 · Cited by 10
Wang, C.-S., Tang, Q., Sun, T., Feng, X.-N., Shen, K., Zheng, Y.-J., & Ouyang, M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236413 · Cited by 10
Hongkun, L., Noor, M. M., Kadirgama, K., & Beg, M. S. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125984 · Cited by 10
Nema, P. K., Muthukumar, P., & Thangavel, R. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103573 · Cited by 10
Enhanced Passive Thermal Management for Electric Vehicle Batteries Using a 3D Pulsating Heat Pipe
Cattani, L., Sacchelli, F., & Bozzoli, F. (2025) · Energies · doi:10.3390/en18092306 · Cited by 12
Tang, Z., Yu, P., Lu, K., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126722 · Cited by 10
Rahman, M. A., Reddy, G. M. V., Chatterjee, R., Hait, S., Hasnain, S. M. M., Paramasivam, P., & Dabelo, L. H. (2025) · Global Challenges · doi:10.1002/gch2.202500083 · Cited by 25
Thermal management requirements in battery packs: An analysis of the effects of battery degradation
Yang, R., Li, K., Xie, Y., Zhang, Y., Xi, C., & Zhang, Y. (2025) · Energy · doi:10.1016/j.energy.2025.137067 · Cited by 11
Fang, K., Mu, D. B., Chen, S., et al. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-010-1249-z · Cited by 10
“[10] proposed heat generation rate model, a number of scholars had adopted thermal model to study thermal behavior of battery.”
BackgroundMODELLING OF HEAT GENERATION IN AN 18650 LITHIUM-ION BATTERY CELL UNDER VARYING DISCHARGE RATES
Hwang, F. S., Confrey, T., Scully, S., et al. (2020) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2020.fue.032096 · Cited by 10
New Experimental Approach for the Determination of the Heat Generation in a Li-Ion Battery Cell
Christen, R., Martin, B., & Rizzo, G. (2021) · Energies · doi:10.3390/en14216972 · Cited by 10
“In addition, according to the literature [12,13] an entropic heat flow is expected to appear due to charge and discharge reactions at the electrodes, which can be expressed as”
BackgroundApplying a numerical optimization to determine the entropic heat coefficient of a battery
Lenz, M., Hoehl, T., Mertes, S., & Pischinger, S. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118467 · Cited by 10
A Coupled Thermo-Mechanical Dynamic Characterization of Cylindrical Batteries
Alsharif, K. I., Pesch, A. H., Borra, V., et al. (2022) · IEEE Access · doi:10.1109/access.2022.3173640 · Cited by 10
“A. NTGK MODEL The Newman, Tiedemann, Gu, and Kim model (NGTK) is a semi-empirical electrochemical model proposed by Kwon et al. [27].”
BackgroundInfluentialKoopman Model Predictive Control of an Integrated Thermal Management System for Electric Vehicles
Pan, C. F., & Li, Y. (2023) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.4062160 · Cited by 14
Online maximum discharge power prediction for lithium-ion batteries with thermal safety constraints
Wang, L., Song, Y., Lyu, C., Yang, D., Wan, M., & Ge, Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108041 · Cited by 10
Cheng, S., Jiang, L., Wei, Z., et al. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.143674 · Cited by 10
Multiphysics simulation of the effect of compressed separator on lithium-ion battery
Hu, Q., Sheng, L., Xie, X. Y., Yang, L., Gao, X., Li, D., Bai, Y., Liu, G., Dong, H., Wang, T., et al. (2024) · Solid State Ionics · doi:10.1016/j.ssi.2024.116471 · Cited by 10
Garrick, T. R., Koch, B. J., Choi, M., et al. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad1d27 · Cited by 10
Effects of Pyrite (FeS2) Particle Sizes on Electrochemical Characteristics of Thermal Batteries
Choi, Y., Yu, H., Cheong, H., et al. (2014) · Applied Chemistry for Engineering · doi:10.14478/ace.2013.1123 · Cited by 10
“이러한 저항의 증가는 방전이 진행되 면서 전도도가 낮은 Z-phase (Li3Fe2S4)의 생성과 양극의 성형성 및 flooded 타입의 전극을 제조하기 위해 사용되는 공융염(eutectic salt) 인 LiCl-KCl에서의 KCl의 전극내 석출에 의한 것으로 알려져 있다 [16].”
Thermal Performance Analysis of the Lithium-Ion Batteries
Li, M., & Wang, F. (2010) · International Conference on Parallel and Distributed Computing, Applications and Technologies (PDCAT) · doi:10.1109/pdcat.2010.57 · Cited by 10
“Based on this, Bernadi[1] found a way to calculate the heat production.”
BackgroundInfluentialA Simplified Approach for Heat Generation Due to Entropy Change in Cylindrical LCO Battery
Chanthevee, P., Hirai, S., Lailuck, V., et al. (2018) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2018.8433303 · Cited by 10
“[9] expressed the developed expression of heat generation inside battery as follows:”
MethodModeling general energy balance of systems
Albini, A., & Rajnai, Z. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.02.228 · Cited by 10
Simplification strategy research on hard‐cased Li‐ion battery for thermal modeling
Xifeng, C., Zeng, J. C., Zhang, H., Yang, J., Qiao, J., Li, J., & Li, W. (2020) · International Journal of Energy Research · doi:10.1002/er.5140 · Cited by 10
Extending Energy Storage Lifetime of Autonomous Robot-Like Mobile Charger for Electric Vehicles
Kong, P. (2020) · IEEE Access · doi:10.1109/access.2020.3000820 · Cited by 10
An Efficient Electrochemical-Thermal Tanks-in-Series Model for Lithium-Ion Batteries
Subramaniam, A., Kolluri, S., Santhanagopalan, S., & Subramanian, V. R. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aba700 · Cited by 10
Revised theory of entropy and reversible energy flow in galvanic cells
Mertin, G. K., Oldenburger, M., Richter, E., Hofmann, M. H., & Birke, K. P. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228813 · Cited by 12
Simplified Electro-Thermal Model For Lithium Cells Based On Experimental Tests
Barbieri, M., Ceraolo, M., Lutzemberger, G., et al. (2020) · doi:10.23919/aeitautomotive50086.2020.9307396 · Cited by 10
Naik, I. C., & Nandgaonkar, M. R. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-0673-1_8 · Cited by 18
Li, Q., Shi, H., Xie, G., et al. (2021) · International Journal of Energy Research · doi:10.1002/er.6933 · Cited by 10
Singh, K., Tjahjowidodo, T., Boulon, L., & Feroskhan, M. (2021) · Energy · doi:10.1016/j.energy.2021.121942 · Cited by 10
Desensitized Optimal Control of Electric Aircraft Subject to Electrical–Thermal Constraints
Wang, M., Luiz, S. O. D., Zhang, S., & Lima, A. M. N. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3159172 · Cited by 13
“where qG includes irreversible heat (Joule heat) and reversible heat (entropic heat), which reads as [38]”
BackgroundPan, C., Chen, Z., Tang, Q., et al. (2022) · Journal of Energy Engineering · doi:10.1061/(asce)ey.1943-7897.0000845 · Cited by 10
Modeling and Simulation of a Commercial Lithium-Ion Battery with Charge Cycle Predictions
Náfate, M. P. C., Mendoza, A. C., Gómez, C. J. V., & Espinosa-Moreno, F. (2022) · Sustainability · doi:10.3390/su142114035 · Cited by 13
Numerical modeling and experimental validation of pouch-type lithium-ion battery
Song, J., You, S.-J., & Jeon, D. H. (2014) · Journal of Applied Electrochemistry · doi:10.1007/s10800-014-0723-x · Cited by 10
Kim, Y., Mohan, S. N., Siegel, J. B., Stefanopoulou, A. G., & Ding, Y. C. (2013) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2013.6760784 · Cited by 11
“The heat generation rate Q can be calculated by the simplified form in [12] as following:”
MethodMicroscopic in-operando thermography at the cross section of a single lithium ion battery stack
Heubner, C., Lämmel, C., Junker, N., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.09.007 · Cited by 10
Lumped Parameter Modeling of Electrochemical and Thermal Dynamics in Lithium-Ion Batteries
Schmidt, A., Bitzer, M., Imre, Á. W., et al. (2010) · IFAC Proceedings Volumes · doi:10.3182/20100712-3-de-2013.00010 · Cited by 10
Heat Generation Measurements of Prismatic Lithium Ion Batteries
Chen, K. (2013) · UWSpace (University of Waterloo) · Cited by 13
Wang, L., Liu, J., Liu, G., Huang, Y., Yu, X., & Fan, L. (2025) · Advanced Materials · doi:10.1002/adma.202511928 · Cited by 23
Xie, H., Chen, H., Shi, C., Liu, C., Li, M., & Chang, W. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130325 · Cited by 10
Sharma, A., Sreedhara, S., Khatamifar, M., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130436 · Cited by 9
Milyani, A. H., Attar, E. T., Abdulaal, M. J., Ajour, M. N., Abu‐Hamdeh, N. H., & Karimipour, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104887 · Cited by 9
RetractedGuo, Q., Guo, J., Liu, J., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108905 · Cited by 9
Effective Models of Heat Conduction in Composite Electrodes
Li, W., & Tartakovsky, D. M. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acfdd4 · Cited by 9
Wang, N., Wang, W., Li, C., Yin, Y., Chen, A., Duan, B., & Zhang, C. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3360971 · Cited by 9
Chen, C., Tang, Y., Ma, Y., Zhu, G., & He, G. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234160 · Cited by 8
Hmidi, N., Merrouni, A. A., Salhi, J., et al. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104983 · Cited by 9
Hua, J., Vie, P. J. S., & Wind, J. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145289 · Cited by 9
Ma, S., Sun, B., Chen, X., Zhang, X., Zhang, X., Zhang, W., Ruan, H., & Zhao, X. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114387 · Cited by 11
Kim, M., Kim, D., Kim, Y., & Lee, B. J. (2025) · Journal of Power Sources Advances · doi:10.1016/j.powera.2025.100167 · Cited by 10
Liu, Q., Jü, X., Qu, T., Li, J., Fan, Q., Zhu, X., & Xu, C. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116265 · Cited by 9
Nanofluid-Based Counterflow Immersion Cooling for Lithium-Ion Battery During Fast Charging
d’Apolito, L., Sun, L., Hong, H., et al. (2025) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4068397 · Cited by 9
Thermal Management and Performance Optimization in High-Power-Density Lithium-Ion Battery Modules
He, J., Wang, C., & Huang, Y. (2025) · Energies · doi:10.3390/en18092294 · Cited by 9
An, Z., Liu, H., Gao, W., & Zhang, J. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126765 · Cited by 11
Nirmala, S., Sutheesh, P. M., & Bandaru, R. (2025) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4069078 · Cited by 9
Strategy of battery thermal management for eVTOL by combination of PCM and immersion cooling
Chai, X., Xu, X., & Liang, X. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103824 · Cited by 17
Ma, Q., Ma, Y., Gao, J., & Chen, H. (2025) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2025.3598509 · Cited by 10
“The battery heat generation rate is expressed as [30] where I b is the battery current; R b is the battery internal resistance; dU oc / dT b is the entropy heat coefficient.”
Electro-Thermal Modeling and Parameter Identification of an EV Battery Pack Using Drive Cycle Data
Mannapperuma, V., Gaddala, L. C., Zheng, R., Kim, D.-H., Kim, Y., Ullal, A., Zhu, S., & Ha, K. P. (2025) · Batteries · doi:10.3390/batteries11090319 · Cited by 13
“…the following equation: When analyzing experimental data, however, the irreversible heat generation is estimated using Equation (8) as presented in [23]; The second component, reversible heat generation , is associated with entropy changes during electrochemical reactions [22,24,25], and is given…”
Kumar, D., Samanta, A., & Dutta, T. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.107768 · Cited by 9
Wang, C.-S., Wang, Y., Zheng, Y.-J., Shen, K., Lai, X., Xu, C.-S., Ben-Marzouk, M., & Meng, X. (2026) · International journal of thermal sciences · doi:10.1016/j.ijthermalsci.2025.110467 · Cited by 10
He, T., Mi, H., Wang, W., et al. (2025) · Energy · doi:10.1016/j.energy.2025.137590 · Cited by 9
Electrical and thermal characteristics of lithium-ion cells
Vaidyanathan, H., & Rao, G. (1999) · doi:10.1109/bcaa.1999.795970 · Cited by 9
Parameterization and Validation of an Integrated Electro-Thermal LFP Battery Model
Perez, H. E., Siegel, J. B., Lin, X., Ding, Y. C., & Castanier, M. P. (2012) · Cited by 10
Thermal characteristics of battery module with trapezoidal structure
Cao, L., Xia, G., Li, T., et al. (2018) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2018.1517553 · Cited by 9
“[22] developed a general energy-balanced model for estimating the heat generation rate of single cell and the model was adopted by many researchers due to ease of use and reasonable accuracy.”
BackgroundSelection of an Ideal Coolant to Ward Off the Thermal Runaway of a Pouch Type Li-Ion Battery Module
Monika, K., Chakraborty, C., Roy, S., Dinda, S., Singh, S. A., & Datta, S. P. (2021) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4049568 · Cited by 9
Queisser, O., Cloos, L., Boehm, F., et al. (2021) · Energy Technology · doi:10.1002/ente.202000915 · Cited by 9
Pedersen, D., Lybbert, M., & Warren, R. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106204 · Cited by 10
Measurement approaches for Thermal Impedance Spectroscopy of Li-ion batteries
Kirst, C., Zayas, J. R., & Singer, J. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233020 · Cited by 11
Impact of the battery SOC range on the battery heat generation and maximum temperature rise
Ziat, K., Louahlia, H., Voicu, I. V., et al. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12427-3 · Cited by 9
“As defined by Bernardi model [29], the irreversible heat generation is resulted from Joule heating.”
BackgroundGonzalez-Aguirre, E., Behi, H., Gastelurrutia, J., del Portillo, L. A., Kalogiannis, T., & Berecibar, M. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3305505 · Cited by 10
Shen, K., Dai, J., Zheng, Y., Xu, C., Zhang, R., Wang, H., Jin, C., Han, X., Lai, X., Qian, X., et al. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.102197 · Cited by 9
Mehta, R., & Gupta, A. K. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.143509 · Cited by 9
Graichen, H.-C., Boye, G., Sauerhering, J., Köhler, F., & Beyrau, F. (2023) · Batteries · doi:10.3390/batteries10010001 · Cited by 12
Torrano, I., Martín-Ortiz, J., Dauvergne, J., Serrano, Á., & Bielsa, D. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235148 · Cited by 10
Wang, J., Lv, D., Sha, H., Lai, C., Zeng, J., Gao, T., Yang, H., Wu, H., & Jiang, Y. (2024) · Energies · doi:10.3390/en17174451 · Cited by 10
“…of basic parameters to calculate the heat generation of the ba tt ery, making it widely used in both engineering applications and academic research [32]. electrochemical thermal ba tt ery model thermal battery model requires detailed fundamental parameters of the battery, which is challenging to…”
BackgroundMethodIntegrated Battery Management System
Samadi, M. F., & Saif, M. (2015) · Springer eBooks · doi:10.1007/978-3-319-15898-3_11 · Cited by 14
Design and simulation of liquid cooled system for power battery of PHEV
Wang, J., Xu, H., Xu, X., et al. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/231/1/012025 · Cited by 9
Liu, J., Mendoza, S., & Fathy, H. K. (2017) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2017.08.2298 · Cited by 9
Huang, X., Ke, S., Lv, H., & Liu, Y. (2018) · Ionics · doi:10.1007/s11581-018-2476-8 · Cited by 10
“The diffusion coefficient of Li in the solid phase D1, the diffusion coefficient of EC DEC, the reaction rate constants kc and ka for Li + intercalation/deintercalation, and the side reaction rate constant kSEI all obey the Arrhenius formula [28].”
MethodXie, J., Ma, J., & Chen, J. (2018) · Energies · doi:10.3390/en11051112 · Cited by 9
“Assuming that the temperature gradient across the battery is uniform, the thermal balance [20] can be expressed as”
BackgroundMao, Y., Guo, R., Sheng, L., et al. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac0b59 · Cited by 9
Ding, Y., Wei, M., & Liu, R. (2021) · Thermal Science · doi:10.2298/tsci201019223d · Cited by 9
“So, in this article, the formula which obtained by empiric is adopted to estimate the heat generation rate during discharge, which can be expresses as follow[26]:”
MethodThermal Analysis of LMO/Graphite Batteries Using Equivalent Circuit Models
Mahfoudi, N., Boutaous, M., Xin, S., & Buathier, S. (2021) · Batteries · doi:10.3390/batteries7030058 · Cited by 9
“The results given by the Bernardi model and the measurements are compared, and acceptable agreement is observed.”
MethodResultInfluentialYu, X., Wu, Q., Huang, R. N., et al. (2021) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4053308 · Cited by 9
Qi, X., Liu, B., Yun, F., Wang, C., Wang, R., Pang, J., Tang, H., Quan, W., Zhang, Q., Yang, M., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08597b · Cited by 10
Yang, J., & Chen, K.-C. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac4db2 · Cited by 9
Lagnoni, M., Latini, D., Nicolella, C., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104237 · Cited by 9
Solaï, E., Beaugendre, H., Bieder, U., et al. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119656 · Cited by 9
“A model taking into account two main electro chemical phenomena was first proposed by [16] and used in numerous references [17, 18, 19, 20, 7, 21, 22, 23].”
BackgroundWu, B., Li, Z., Zhang, J., et al. (2013) · doi:10.1109/evs.2013.6914769 · Cited by 9
Lin, C., Cui, C., & Xu, X. (2013) · doi:10.1109/evs.2013.6914959 · Cited by 9
“(1)Device ready: Test devices, ensure reliability and safety; World Electric Vehicle Journal Vol.”
Modelling and Simulation of Pouch Lithium-Ion Battery Thermal Management Using Cold Plate
Zhang, X., Wang, T., Jiang, S. B., Xu, H., & Zhang, Y. N. (2018) · International Journal of Simulation Modelling · doi:10.2507/ijsimm17(3)449 · Cited by 9
“FLUENT 17.0 was used to solve the heat model in this study.”
MethodInfluential
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.