The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
A General Energy Balance for Battery Systems
Open accessAbstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 801–900 of 2,542
Febriyanto, R., Ariyadi, H. M., Pranoto, I., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112799 · Cited by 29
Yan, H., Ma, X., Chen, Y., et al. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124747 · Cited by 29
Recent advances in immersion cooling for thermal management of lithium-ion batteries
Liu, J., Tao, L., Yang, Q., & Wang, J. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116492 · Cited by 40
Hu, B., Ma, Z., Lei, W., et al. (2017) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2017.09.001 · Cited by 29
Huie, M. M., Bock, D. C., Bruck, A. M., Tallman, K. R., Housel, L. M., Wang, L., Thieme, J., Takeuchi, K. J., Takeuchi, E. S., & Marschilok, A. C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20636 · Cited by 29
Hales, A., Prosser, R., Diaz, L. B., White, G., Patel, Y., & Offer, G. J. (2020) · eTransportation · doi:10.1016/j.etran.2020.100089 · Cited by 33
Integrating Electrochemical Modeling with Machine Learning for Lithium-Ion Batteries
Tu, H., Moura, S. J., & Fang, H. (2021) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc50511.2021.9482997 · Cited by 37
“The SPMT is an improved version of the SPM, which contains an extra bulk thermal model to describe a LiB’s thermal behavior [22].”
MethodElsergany, A. M., Hussein, A. A.-H., Wadi, A., & Abdel–Hafez, M. F. (2022) · IEEE Access · doi:10.1109/access.2022.3148281 · Cited by 30
“Models ranging from volume averaged temperature models as in [20] to two-state lumped thermal models as in ([21], [22]) have shown promising results but suffer from high complexity and computational effort.”
BackgroundZhu, W., Lei, F., Zhong, H., & Jiang, X. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118320 · Cited by 29
Liu, W., Hu, X., Lin, X., Yang, X., Song, Z., Foley, A. M., & Couture, J. (2022) · eTransportation · doi:10.1016/j.etran.2022.100195 · Cited by 32
Numerical and experimental study on thermal management of NCM-21700 Li-ion battery
Yang, T., Lin, P.-Y., Teng, L.-T., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232068 · Cited by 29
An, Z., Luo, Y., Zhang, C., & Li, D. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106017 · Cited by 29
Entropy Coefficient of a Blended Electrode in a Lithium-Ion Cell
Huang, J. Z., Li, Z., Liaw, B. Y., et al. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0811512jes · Cited by 29
Ramotar, L., Rohrauer, G., Filion, R., & MacDonald, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.040 · Cited by 29
Li, D., Deng, J., Zhang, Z., Wang, Z., Zhou, L., & Liu, P. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3241938 · Cited by 37
“According to the following Bernardi equation [31], bigger abnormal IR will cause more heat generation, which makes the battery easier to cross “critical condition” and rush to thermal runway.”
BackgroundSon, Y. W., Kang, D., & Kim, J. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120186 · Cited by 33
Lee, N., Choi, J.-Y., Lee, J., Shin, D.-H., & Um, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108594 · Cited by 31
Chen, H., Zhang, T., Chen, H., et al. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234253 · Cited by 28
A Review of Parameter Identification and State of Power Estimation Methods for Lithium-Ion Batteries
Ma, C., Wu, C. Q., Wang, L., Chen, X., Liu, L., Wu, Y., & Ye, J. (2024) · Processes · doi:10.3390/pr12102166 · Cited by 33
How to select cooling methods for Li-ion batteries? –A review from the perspective of heat flux
Li, X., Zhang, Z., Zhao, X., Liu, S., Li, H., & Wang, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2024.115072 · Cited by 30
Liu, F., Yang, Q., Zheng, D., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126391 · Cited by 28
Fan, G., Pan, K., Storti, G. L., Canova, M., Marcicki, J., & Yang, X. G. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0791702jes · Cited by 28
Heat Generation Characteristics of LiFePO4 Pouch Cells with Passive Thermal Management
Neupane, S., Alipanah, M., Barnes, D., & Li, X. (2018) · Energies · doi:10.3390/en11051243 · Cited by 34
“As cited in the literature, at higher current rates, the change in the magnitude of reversible heat is relatively small in comparison to the irreversible heat [3,10].”
BackgroundMethodDu, J., Mo, X., Li, Y., Zhang, Q., Li, J., Wu, X., Lu, L., & Ouyang, M. (2019) · Energy · doi:10.1016/j.energy.2019.05.222 · Cited by 30
Chen, S., Bao, N., Peng, X., Garg, A., & Chen, Z. (2019) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4045324 · Cited by 28
Liu, Y.-B., Gao, Q., Zhang, T.-S., Cui, C., & Jin, S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114717 · Cited by 26
Analysis of lithium-ion battery thermal models inaccuracy caused by physical properties uncertainty
Dong, T., Wang, Y., Cao, W., Zhang, W., & Jiang, F. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117513 · Cited by 30
Space-Decomposition-Based Spectral Modeling for Distributed Battery Thermal Dynamics
Zhou, Y., Li, H., & Xie, S. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3124894 · Cited by 28
Shi, H., Liu, M., Xu, W., et al. (2022) · International Journal of Electrochemical Science · doi:10.20964/2022.05.46 · Cited by 28
Pordanjani, A. H., Aghakhani, S., Afrand, M., Zhang, P., Tang, R., Mahian, O., Wongwises, S., & Rashidi, M. M. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232112 · Cited by 28
Yun, F., Liu, S., Gao, M., Bi, X., Zhao, W., Chang, Z., Yuan, M., Li, J., Shen, X., Qi, X., et al. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.12.033 · Cited by 28
Zha, Y., Meng, X., Qin, S., Hou, N., He, S., Huang, C., Zuo, H., & Zhao, X. (2023) · Energy · doi:10.1016/j.energy.2023.127049 · Cited by 28
Electrochemical polarization-based fast charging of lithium-ion batteries in embedded systems
Zoerr, C., Sturm, J., Solchenbach, S., Erhard, S. V., & Latz, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108234 · Cited by 27
“Thus, a simplified energy mass balance that is derived from the work of Bernardi [31] is applied.”
Ultra-thin vapour chamber based heat dissipation technology for lithium-ion battery
Yin, S., Zhao, W., Tang, Y. Z., Li, H., Huang, H., Ji, W., & Zhang, S. (2024) · Applied Energy · doi:10.1016/j.apenergy.2023.122591 · Cited by 26
Thermal analysis of rapid charging nickel/metal hydride batteries
Shi, J., Wu, F., Chen, S., et al. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.08.005 · Cited by 28
Yıldız, M., Karakoç, T. H., & Dinçer, İ. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.03.009 · Cited by 28
Zhang, Q., Wei, F., Zhang, P., Dong, R., Li, J., Li, P., Jia, Q., Liu, Y., Mao, J., & Shao, G. (2022) · Fire Technology · doi:10.1007/s10694-022-01220-7 · Cited by 30
“According to previous reports [17, 39], the insertion and extraction of lithium-ion across between the anode and cathode will cause structural changes of the electrode, resulting in DS.”
BackgroundLudwig, S., Steinhardt, M., & Jossen, A. (2022) · Batteries · doi:10.3390/batteries8070060 · Cited by 34
Liu, X., Wang, Q., Luo, K., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121652 · Cited by 27
Zhang, X., Gao, C., Gao, Q., & Gao, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122249 · Cited by 29
Liquid Cooling Systems for Batteries of Electric Vertical Takeoff and Landing Aircraft
Zhao, C., Clarke, M. A., Kellermann, H., & Verstraete, D. (2024) · Journal of Aircraft · doi:10.2514/1.c037404 · Cited by 28
Structure optimization design and performance analysis of liquid cooling plate for power battery
Yuan, J., Gu, Z., Bao, J., Yang, T., Li, H., Wang, Y., Pei, L., Jiang, H., Chen, L., & Yuan, C. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111517 · Cited by 27
Tahhan, A. B. A., AlKhedher, M. A., Ramadan, M., ElCheikh, A., Choi, D. S., & Ghazal, M. A. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123754 · Cited by 32
Multi-objective optimization of liquid cooling system for lithium-ion battery
Nie, J., Liu, Z., Su, J., Zhang, C., & Li, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114380 · Cited by 36
Yu, K., Adeyinka, A. M., Choe, S.-Y., & Lee, W. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235759 · Cited by 29
Monitoring and control of internal temperature in power batteries: A comprehensive review
Guo, X., Yang, Y., Shi, C., Xu, M., Liu, Y., & Zou, D. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104051 · Cited by 51
Tang, Z., Li, X., Li, Y., & Cheng, J. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126833 · Cited by 30
Yang, N., Zhang, X., & Li, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.054 · Cited by 31
Optimal energy management for formula-E cars with regulatory limits and thermal constraints
Liu, X., Fotouhi, A., & Auger, D. J. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115805 · Cited by 27
Sensor based in-operando lithium-ion battery monitoring in dynamic service environment
Li, B., Jones, C. M., Adams, T. E., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229349 · Cited by 27
Efficient reduced order model for heat transfer in a battery pack of an electric vehicle
Xiang, L., Lee, C. W., Zikanov, O. Y., & Hsu, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117641 · Cited by 32
Recent advances in the modeling of fundamental processes in liquid metal batteries
Agarwal, D., Potnuru, R., Kaushik, C., Darla, V. R., Kulkarni, K. N., Garg, A., Gupta, R. K., Tiwari, N., & Nalwa, K. S. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112167 · Cited by 25
Yang, N., Song, Z., Amini, M. R., & Hofmann, H. F. (2022) · Automotive Innovation · doi:10.1007/s42154-022-00180-6 · Cited by 29
“[43, 44].”
Surya, S., Samanta, A., Marcis, V. A., & Williamson, S. S. (2022) · Energies · doi:10.3390/en15020623 · Cited by 29
Hu, Z., Liu, F., Chen, P., Xie, C., Huang, M., Hu, S., & Lü, S. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118860 · Cited by 34
An improved thermal single particle model and parameter estimation for high-capacity battery cell
Hong, C., Cho, H., Hong, D., Oh, S.-K., & Kim, Y. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.141638 · Cited by 30
Model-Based Estimation of Reversible Heat Generation in Lithium-Ion Cells
Marcicki, J., & Yang, X. G. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0281412jes · Cited by 32
Improved Thermal Performance of a Li-Ion Cell through Heat Pipe Insertion
Anthony, D., Wong, D. N., Wetz, D. A., & Jain, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0191706jes · Cited by 30
Investigation of 3-D multilayer approach in predicting the thermal behavior of 20 Ah Li-ion cells
Alipour, M., Esen, E., & Kizilel, R. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.020 · Cited by 28
Xiao, J., Zhang, X., Bénard, P., et al. (2023) · Energy Storage · doi:10.1002/est2.453 · Cited by 26
Yang, T., Su, S., Xin, Q., Zeng, J., Zhang, H., Zeng, X., & Xiao, J. (2023) · Batteries · doi:10.3390/batteries9060287 · Cited by 26
Ageing comparison of passive battery thermal management systems: Air cooling and loop heat pipes
He, H., Fly, A., Chen, X., Malalasekera, W. M. G., & Bernagozzi, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123319 · Cited by 30
Sun, Y., Liu, F., Qin, W., Li, J., Cheng, X., & Zeng, J. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234806 · Cited by 31
Li, W., Wang, Y., He, B., Guo, J. H., Ju, G., Yu, Z., Chen, Z., & Jiang, F. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.125185 · Cited by 28
Rahmani, A., Dibaj, M., & Akrami, M. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115398 · Cited by 28
Liu, X., Li, Y., Gao, S., Zhou, Z.-F., Wu, W.-T., Wei, L., Lyu, J., Li, Y., & Song, Y.-C. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125510 · Cited by 28
Li, W., Wang, J., Sun, C., Fan, X., Gong, L., Huang, J., Wu, J., Yu, G., Chen, R., Li, J., et al. (2025) · ACS Chemical Health & Safety · doi:10.1021/acs.chas.4c00121 · Cited by 31
A Time-Efficient and Accurate Open Circuit Voltage Estimation Method for Lithium-Ion Batteries
Chen, Y., Yang, G., Liu, X., & He, Z. (2019) · Energies · doi:10.3390/en12091803 · Cited by 28
Xie, Y., Li, B., Hu, X., Lin, X., Zhang, Y., & Zheng, J. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3046735 · Cited by 28
“[11] proposed the first thermal model for batteries.”
BackgroundSong, M., Hu, Y., Choe, S.-Y., & Garrick, T. R. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac7a5f · Cited by 25
Xu, X., Sun, X., Zhao, L., et al. (2022) · Ionics · doi:10.1007/s11581-022-04730-0 · Cited by 26
Biazi, V., Moreira, A. C., Pinto, J. L., Nascimento, M. S., & Marques, C. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106814 · Cited by 27
Novel approach for liquid-heating lithium-ion battery pack to shorten low temperature charge time
Liu, X., Hong, X., Jiang, X., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107507 · Cited by 26
Uncertainties in entropy due to temperature path dependent voltage hysteresis in Li-ion cells
Zilberman, I., Rheinfeld, A., & Jossen, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.052 · Cited by 23
Experimental investigation and thermal modelling of a series connected LiFePO4 battery pack
Malik, M., Mathew, M., Dinçer, İ., Rosen, M. A., McGrory, J., & Fowler, M. W. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.06.025 · Cited by 30
Shrinet, E. S., Akula, R., & Kumar, L. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112726 · Cited by 25
Jang, J.-W., Jo, J., Kim, J., Lee, S., Lee, T., & Yoo, J. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.109704 · Cited by 34
Meng, J.-H., Ma, C., Liu, Y., Wang, L., Xu, C., & Lu, G. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115404 · Cited by 27
Thermal management challenges in lithium-ion batteries: understanding heat generation mechanisms
Maher, K., Boumaiza, A., & Amin, R. (2025) · Chemical Communications · doi:10.1039/d4cc05619a · Cited by 27
Hu, Z., Peng, Y., Lv, Y., Wen, J., Cai, Y., Yin, Q. X., & Wang, W. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125913 · Cited by 27
Mendoza, S., Rothenberger, M. J., Liu, J., et al. (2017) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2017.08.1468 · Cited by 25
Effects of different charging and discharging modes on thermal behavior of lithium ion batteries
Yang, Y. K., Wang, Z., Jiang, J., et al. (2019) · Fire and Materials · doi:10.1002/fam.2778 · Cited by 25
“Total: C6 s ð Þ þ LiCoO2 s ð Þ ⇄ Charge Discharge LixC6 s ð Þ þ Li1‐xCoO2 s ð Þ (3)”
Asenbauer, J., Hoefling, A., Indris, S., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19958 · Cited by 25
Measurement of the Temperature Influence on the Current Distribution in Lithium‐Ion Batteries
Paarmann, S., Cloos, L., Technau, J., & Wetzel, T. (2020) · Energy Technology · doi:10.1002/ente.202000862 · Cited by 29
Performance analysis of an integrated battery electric vehicle thermal management
Kulkarni, V., Ghaisas, G., & Krishnan, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105334 · Cited by 26
Liu, Z., Wang, B., Chen, S., & Li, P. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110391 · Cited by 25
Temperature propagation in prismatic lithium-ion-cells after short term thermal stress
Bohn, P., Liebig, G., Komsiyska, L., & Wittstock, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.055 · Cited by 25
Experimental analysis on Li-ion battery local heat distribution
Rizk, R., Louahlia, H., Gualous, H., et al. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08283-9 · Cited by 25
Peltier effects in lithium-ion battery modeling
Spitthoff, L., Gunnarshaug, A. F., Bedeaux, D., Burheim, O. S., & Kjelstrup, S. (2021) · The Journal of Chemical Physics · doi:10.1063/5.0038168 · Cited by 26
A Reduced-Order Model for the Thermal Dynamics of Li-Ion Battery Cells
Muratori, M., Canova, M., GUEZENNEC, Y. G., & Rizzoni, G. (2010) · IFAC Proceedings Volumes · doi:10.3182/20100712-3-de-2013.00190 · Cited by 29
Abdul-Quadir, Y., Laurila, T. T., Karppinen, J., & Paulasto‐Kröckel, M. (2013) · International Journal of Energy Research · doi:10.1002/er.3049 · Cited by 25
“[11] is cited frequently in the literature in its simplified form [Equation (1)] for heat generation in a battery cell.”
BackgroundVirtual test bed for advanced power sources
Dougal, R. A., Liu, S., Gao, L., et al. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00191-x · Cited by 25
“This approach considers the fullycoupled equations for all processes, yielding the history of each process, the interactions between different processes, and the effect of each parameter on the dynamic system response.”
BackgroundXu, J., Fang, H., Wang, M., Li, X., & Chen, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122177 · Cited by 28
Sutheesh, P. M., Atul, A. P., & Bandaru, R. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110889 · Cited by 24
Saha, S., Bose, B., Garg, A., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112750 · Cited by 24
Chen, G., Song, K., He, R. K., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113818 · Cited by 24
Ma, R., Xuan, W., Jiang, Z., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113927 · Cited by 24
Xu, Q., Huang, H., Gu, Y., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125639 · Cited by 24
Li, W., Xie, Y., Zhang, Y., et al. (2025) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2025.109997 · Cited by 24
Lempert, J., Kollmeyer, P. J., Malysz, P., Gross, O., Cotton, J. S., & Emadi, A. (2020) · SAE International Journal of Advances and Current Practices in Mobility · doi:10.4271/2020-01-0862 · Cited by 26
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.