The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
A General Energy Balance for Battery Systems
Open accessAbstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 1,501–1,600 of 2,542
Comparative Study of Thermal Characteristics of Lithium-ion Batteries for Vehicle Applications
Ma, Y., & Teng, H. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-01-0668 · Cited by 7
Renewable Energy Integration with Energy Storage Systems and Safety
Bolufawi, O. (2018) · InTech eBooks · doi:10.5772/intechopen.78351 · Cited by 7
“[14] classic work, estimates the heat generated from batteries using a mathematical model.”
BackgroundZhao, L., Zhu, M., Xu, X., et al. (2018) · International Journal of Energy Research · doi:10.1002/er.4240 · Cited by 7
Wan, C. (2020) · Ionics · doi:10.1007/s11581-020-03636-z · Cited by 7
A complete machine learning approach for predicting lithium-ion cell combustion
Yravedra, F. A., & Li, Z. (2020) · The Electricity Journal · doi:10.1016/j.tej.2020.106887 · Cited by 7
Zhao, H., Wang, X., Bai, Y., Jin, H., Zhou, J., Tan, G., & Wu, C. K. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103536 · Cited by 8
Adaptive Estimation of Thermal Dynamics and Charge Imbalance in Battery Strings.
Lin, X. (2014) · Deep Blue (University of Michigan) · Cited by 7
Kunz, A., Kirst, C., Durdel, A., Singer, J. P., & Jossen, A. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235732 · Cited by 6
Wang, Z., Liu, D., Li, Z., et al. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15100464 · Cited by 6
“…not consider the e ff ects of capacitive and induced reactance in the ba tt ery on the temperature rise of the ba tt ery, the simpli fi ed Bernadi D [8], heat generation model was adopted in this paper, and the heat generation rate of the ba tt ery during discharge can be obtained by the following…”
Qi, X., Hong, C., Gu, L., et al. (2025) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2025.3547023 · Cited by 6
“Theequivalentheating power of LIB is calculated using the Bernardi equation [24] where I is the charge and discharge current of LIB, E is the open-circuit voltage (OCV) of LIB, U is the terminal voltage of LIB, T is the temperature of LIB, and dE/dT is the entropy coefficient of LIB.”
Wei, L., Lin, T., & Wang, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116316 · Cited by 6
Li, W., Zhang, J., Huang, M., & Liu, Z. (2025) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-025-0747-7 · Cited by 6
“…paper focuses on one-dimensional thermal management simulation, in order to reduce the complexity of power battery modeling and facilitate the calculation of the heat generation rate of the battery, the heat generation model of a power battery adopts the Bernardi [13] model which is widely used.”
Guo, W., Fang, M., Liu, Y., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127781 · Cited by 6
Feng, Y.-F., Shen, J.-N., & He, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117924 · Cited by 7
Kong, D., Feng, Z., Wang, G., et al. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117999 · Cited by 6
Tang, Z., Li, X., Dong, Y., et al. (2025) · Journal of Energy Engineering · doi:10.1061/jleed9.eyeng-5967 · Cited by 6
Zhang, J., Zhang, D., & Zheng, Y. (2025) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-025-04156-y · Cited by 6
“Its formula is as follows (Bernardi et al. 1985): Among them, V b represents the battery capacity, I represents the current, R represents the total internal resistance of the battery, T represents the battery temperature, and dU ocv / dT represents the entropy heat coefficient.”
Liu, F., Sun, Y., Yang, Q., Qin, W., Cheng, X., & Zeng, J. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128585 · Cited by 6
Saeed, A., Alawi, A., Sharqawy, M. H., & Janaideh, M. A. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3616085 · Cited by 11
“A key aspect of BTMS is understanding heat generation within the battery, which can be modeled using the following Bernardi equation [31]: where ˙ Q is the heat generation produced, I is the current, LIB’s temperature can be classified into two primary types: core and surface temperatures [13].”
Zhu, Y., & Chen, Z. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.104195 · Cited by 6
Wu, Y., Lv, L., Wu, F., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128983 · Cited by 6
Yang, Z., Li, M., Rao, M., Dong, J., Sun, W., & Chen, W. (2025) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2025.110569 · Cited by 6
Structural optimization and cooling performance study of bionic spiral channel liquid cooling plate
He, P., Liu, R., Yan, M., Zhu, S., Yuan, B., Li, X., Fan, Y., & Liu, J. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.110703 · Cited by 7
Bianco, N. D., Fragnito, A., Iasiello, M., et al. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.110773 · Cited by 6
Modeling of the Thermal Energy Management System for Battery Electric Vehicles
Lokur, P., Nicklasson, K., Verde, L., Larsson, M., & Murgovski, N. (2022) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc55846.2022.10003328 · Cited by 8
“The first term in (8) represents heat generation due to the internal resistance of the battery, the second term represents the heat generation due to a reversible process [16], [17] and the last term represents the heat generation due to bus bar resistance.”
BackgroundDing, Y., Chu, W., & Wang, Q. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107909 · Cited by 6
Li, Y., Shang, F., Shen, H., et al. (2024) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4066809 · Cited by 6
Böhm, K., Zintel, S., Ganninger, P., et al. (2024) · Energies · doi:10.3390/en17225790 · Cited by 6
Gong, L., Lin, X., Sun, Y., Yu, G., Li, W., Zheng, S., Li, J., Chen, J., Chen, R., Huang, J., et al. (2025) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2025.105668 · Cited by 10
Recent advancements in the thermal management of lithium-ion batteries
Bahrami, H., & Ghaedi, M. (2025) · Advances in heat transfer · doi:10.1016/bs.aiht.2025.02.003 · Cited by 7
Simulation Analysis of Battery Thermal Management System Using Phase Change Material (PCM)
Li, M. D., & Liang, P. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.433-435.2107 · Cited by 6
Model for a bipolar Li-ion battery module: Automated model generation, validation and verification
Somasundaram, K., Birgersson, E., & MUJUMDAR, A. S. (2012) · Applied Mathematics and Computation · doi:10.1016/j.amc.2012.08.070 · Cited by 6
A Computationally-Effective Thermal Model for Spirally Wound Nickel-Metal Hydride Batteries
Yazdanpour, M., Taheri, P., & Bahrami, M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047401jes · Cited by 6
A methodology for a correct sizing of electrochemical storage devices
Barcellona, S., Piegari, L., Tironi, E., et al. (2015) · IEEE PES Asia-Pacific Power and Energy Engineering Conference · doi:10.1109/appeec.2015.7380875 · Cited by 6
“[4] analyzed the thermal behavior of batteries leading to a mathematical model deriving a heat generation term, as:”
BackgroundElectrochemical–Thermal Characterization and Thermal Modeling for Batteries
Ziebert, C., Melcher, A. M., Lei, B., Zhao, W., Rohde, M., & Seifert, H. J. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-42977-1.00006-6 · Cited by 6
Design opportunities in electric skateboard
Sriram, N. K., Chandar, D. P., Subramanian, V. A., & Ganesh, M. (2017) · International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT) · doi:10.1109/icicict1.2017.8342718 · Cited by 6
“, have provided a heat generation equation for Li-ion battery [5].”
BackgroundXu, X., Sun, X., Zhou, Q., et al. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018812296 · Cited by 6
“The heat generation power of the battery cell can be calculated based on the general model of battery heating established by Bernardi et al.(29) As shown in equation (1)”
MethodWang, J., & Zhang, Y. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/696/1/012007 · Cited by 6
Altın, S., & Korkusuz, K. (2021) · International Journal of Energy Research · doi:10.1002/er.6711 · Cited by 6
Hu, Y. H., & Mao, B. (2022) · Thermal Science · doi:10.2298/tsci210628023h · Cited by 6
Electrothermal Coupling Modeling of Lithium-ion Batteries
Li, J. (2022) · Key Technologies on New Energy Vehicles · doi:10.1007/978-981-19-0844-6_3 · Cited by 6
Pan, C., Jia, Z., Huang, J., et al. (2023) · Journal of Energy Engineering · doi:10.1061/jleed9.eyeng-4855 · Cited by 6
Ren, T., Mao, Z.-Y., Chang, L.-J., Chen, W., Xu, J., Zhang, Y., Chen, T.-W., & Cai, Z.-H. (2023) · Energy Technology · doi:10.1002/ente.202300826 · Cited by 5
He, H., & Chen, X. (2023) · Transportation research procedia · doi:10.1016/j.trpro.2023.11.046 · Cited by 6
Yu, X., & Wang, R. (2023) · Micromachines · doi:10.3390/mi14112128 · Cited by 6
“On the basis of the heat generation model proposed by Bernardi [42], the heat ( Q ) generated by the battery is mainly the irreversible heat generated by the internal resistance of the battery and the reversible heat generated by the electrochemical reaction within the battery: where I ( U OCV − U…”
Karunarathna, J. S., Madawala, U. K., Sandelić, M., Blaabjerg, F., & Baguley, C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3342121 · Cited by 8
“The calculation of q in this study is based on the Bernardi’s equation [24], [25].”
MethodEnergy- and Safety-Aware Operation of Battery-Powered Autonomous Robots in Agriculture
Vyas, S. D., Subash, V. K., Mepani, M., et al. (2024) · IEEE Transactions on AgriFood Electronics · doi:10.1109/tafe.2024.3353597 · Cited by 6
“Next, the thermal dynamics is adopted from [42], [43], and given as follows: where T is battery temperature, m is the mass, C p in J(kgK) − 1 is the specific heat capacity of the cell, h is the convection heat transfercoefficientbetweenthecellsurfaceandtheenvironment, T en is the environmental…”
BackgroundEvaluation of the influence of lithium-ion battery composition on thermal power generation
Giammichele, L., Colarossi, D., D’Alessandro, V., et al. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00191e · Cited by 6
Boutaous, M., Zinet, M., Mathieu, E., et al. (2015) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2015.7112982 · Cited by 6
Lin, C., Xu, S., Li, Z., et al. (2015) · SAE International journal of passenger cars. Electronic and electrical systems · doi:10.4271/2015-01-0254 · Cited by 6
Hybrid BTMS for Lithium-Ion Batteries
Alaoui, C., Zineddine, M., & Boulmalf, M. (2017) · International Renewable and Sustainable Energy Conference (IRSEC) · doi:10.1109/irsec.2017.8477311 · Cited by 7
Wang, Z., & Garikipati, K. C. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0141811jes · Cited by 6
Kuzmina, E. V., Karaseva, E. V., Chudova, N. V., et al. (2019) · Russian Journal of Electrochemistry · doi:10.1134/s1023193519080081 · Cited by 6
Xu, H., Guo, L. D., Tian, H., & Pan, C. (2019) · Journal of Thermophysics and Heat Transfer · doi:10.2514/1.t5824 · Cited by 6
Model-Based End of Discharge Temperature Prediction for Lithium-Ion Batteries
Niri, M. F., Truong, B. N. M., Yu, T. F., et al. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.12.1861 · Cited by 6
Thermal Behaviour of a Cylindrical Li-Ion Battery
Giammichele, L., D’Alessandro, V., Falone, M., et al. (2021) · TECNICA ITALIANA-Italian Journal of Engineering Science · doi:10.18280/ti-ijes.652-412 · Cited by 6
“A complete thermodynamic energy balance for Li-ion battery has been proposed by Bernardi at all [21].”
BackgroundGeringer, D., Hofmann, P., Girard, J., et al. (2021) · Automotive and Engine Technology · doi:10.1007/s41104-021-00088-z · Cited by 6
Analysis of the Temperature Change of a Single Battery Based on Simulink
Kang, Y., Zhang, C., Yang, K., & Gao, Q. (2021) · International Journal of Electrochemical Science · doi:10.20964/2021.10.03 · Cited by 6
Simulation and Control of Battery Thermal Management System for Electric Vehicle
Shen, W., & Wang, N. (2022) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2022-01-7016 · Cited by 6
Yeow, K. F., & Teng, H. (2013) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2013-01-0234 · Cited by 6
Numerical and analytical modelling of battery thermal management using passive cooling systems
Greco, A. (2016) · Lancaster EPrints (Lancaster University) · Cited by 6
Crash Models for Advanced Automotive Batteries: A Review of the Current State of the Art
Oak Ridge National Lab. (ORNL), O. R., Turner, J. E., USDOE, (DOT), U. D. O. T., Allu, S., Gorti, S., Kalnaus, S., Kumar, A., Lebrun-Grandié, D., Pannala, S., et al. (2015) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1302885 · Cited by 6
Two-phase cooling system for electric vehicles’ battery
Cattani, L., Malavasi, M., Bozzoli, F., et al. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2766/1/012011 · Cited by 5
“The Bernardi equation [16] was employed to calculate the heat generation for a single cell, resulting in the curves depicted in figure 3 for the considered battery pack.”
MethodZeng, K., Zhang, Y., Tian, L., et al. (2024) · Energy Technology · doi:10.1002/ente.202400923 · Cited by 5
Song, Z., Li, S., Yan Fu, W. A. N. G., Li, L., Hua, J., Lu, L., Li, Y., Wang, H., Shang, X., & Rui-ping, L. (2024) · Batteries · doi:10.3390/batteries10090328 · Cited by 6
Accelerating rate calorimetry: History, state of the art and perspectives
Ding, J., Liu, K., Xu, C., Li, J., Yan, X., Liang, J., Feng, M., Kossoy, A. A., Xu, J., & Hu, D. (2025) · Chemical Thermodynamics and Thermal Analysis · doi:10.1016/j.ctta.2025.100182 · Cited by 10
PSA-Optimized Compressor Speed Control Strategy of Electric Vehicle Thermal Management Systems
Xia, K., Yu, L., Wang, J., & Yu, W. (2025) · Energies · doi:10.3390/en18112687 · Cited by 5
Bio-inspired hybrid battery thermal management system with gradient flow channels
An, Z., Zhang, J., Zhou, Y., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127211 · Cited by 5
Liang, Y., Luo, W., Mouli, G. R. C., & Bauer, P. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3586087 · Cited by 5
“The heat generation within the battery, as described in [27] and [28], primarily includes two components.”
Xiong, X., Wang, Y., Jiang, C. F., Xiang, H., & Chen, Z. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126524 · Cited by 6
Thakur, S. S., Dhuper, K., & Kumar, L. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127784 · Cited by 5
Zhou, X. J., Wang, Y., Gao, B., et al. (2025) · Applied Sciences · doi:10.3390/app15169129 · Cited by 5
Bhat, P., & Varpe, M. K. (2025) · Energy Storage · doi:10.1002/est2.70239 · Cited by 5
“Irreversible heat is generated due to overpotential, which includes ohmic losses, charge transfer resistances at the interface, and mass transfer limitations [2].”
Sacchelli, F., Cattani, L., & Bozzoli, F. (2025) · Energies · doi:10.3390/en18184937 · Cited by 5
Blyth, M., & Hales, A. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118856 · Cited by 4
Metallo, A. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128979 · Cited by 6
Gao, W., Thoo, A. C., Sarker, M., Lee, N., Deng, X., & Yang, Y. (2025) · Batteries · doi:10.3390/batteries12010001 · Cited by 8
“The thermal behavior of LIBs involves both irreversible heat (i.e., Q ir ) and reversible heat (i.e., Q r ), as described by the Bernardi equation [90]: where I b denotes the charging/discharging current.”
Xu, Q., Zhang, J., Li, X., Zhang, K., Li, X., Bei, S., Zhu, K., Wang, X., Zheng, K., & Li, L. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120372 · Cited by 5
Thermal runaway behaviors in 18,650 LiFePO4 batteries under high C-rate charge/discharge operations
Jeong, I., An, S. W., & Kang, C. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129760 · Cited by 5
Fan, X., Wang, Z., Zhou, H., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129828 · Cited by 5
Huang, H., He, J., Li, Y., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129896 · Cited by 5
Wang, Y., Wang, W., Xu, Y., & Shuai, Y. (2026) · Aerospace Science and Technology · doi:10.1016/j.ast.2026.111811 · Cited by 5
Faseena, A. M. F., Govindaraja, G., & Sreekumar, A. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121005 · Cited by 6
Liquid-Cooled Battery System Design Method for eVTOL Aircraft
Park, J., & Yee, K. (2026) · Journal of the American Helicopter Society · doi:10.4050/jahs.71.022008 · Cited by 6
Zhang, H., Zhao, C., Zhang, Z., Liu, J., Panchal, S., Xiaobin, X., & Zhou, F. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.131709 · Cited by 6
A numerical investigation on phase change material based battery thermal management system
Subramanian, M., Ganeshkumar, D., Sathish, S., Thenmozhi, G., Sivakumar, S., & Muthiya, S. J. (2022) · AIP conference proceedings · doi:10.1063/5.0108201 · Cited by 5
A Novel Approach for Open-Circuit Voltage and Entropic Heat Coefficient Characterization
Caposciutti, G., Marracci, M., & Tellini, B. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3252640 · Cited by 5
“For thermal modeling purposes, the term q̇ can be written as follows [11], [21]:”
BackgroundBhat, P., & Varpe, M. K. (2024) · SAE International Journal of Electrified Vehicles · doi:10.4271/14-13-03-0022 · Cited by 7
Han, M., Lu, L., Li, Y., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111866 · Cited by 5
Liu, Z., Xiong, C., & Du, X. (2024) · IEEE Access · doi:10.1109/access.2024.3436689 · Cited by 5
“Currently, both domestic and international studies widely adopt the battery heat generation rate model established by Bernardi et al. [24], as shown in Equation 14.”
BackgroundXu, J., Xiong, K., Tang, T., Chen, Y., Hu, D., Hou, D., Yu, M., & Ding, J. (2024) · Measurement · doi:10.1016/j.measurement.2024.115578 · Cited by 5
Yogeshwar, D., & Repaka, R. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-28-0083 · Cited by 5
Kumar, D., Gupta, R. B., Ranjan, R., & Dutta, T. (2025) · Enhanced heat transfer/Journal of enhanced heat transfer · doi:10.1615/jenhheattransf.2024054087 · Cited by 7
Wiegelmann, S., Bensmann, A., & Hanke‐Rauschenbach, R. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125704 · Cited by 6
Xie, Y., Guo, W., Zhou, T., Li, W., Fan, Y.-N., Yang, R., & Zhang, Y.-J. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125930 · Cited by 6
Xu, H. F., Zhu, C., Yin, Y., Gong, L., Zhang, Z., & Li, Y. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126944 · Cited by 5
Zhu, W., Lei, F., Liu, J., & Ding, F. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127278 · Cited by 6
Liu, W., Liu, Z., Li, X., & Lv, S. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237594 · Cited by 5
Estimating Heat Generation Rate of Cylindrical Lithium-Ion Batteries by a Transfer Function
Xie, Y.-Z., Lu, X., Bao, P., Li, Y., Gan, Z., Xiao, D., Zhang, T., & Huang, J. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adf2e4 · Cited by 5
H∞ Control of combustion torque ripples on hybrid electric vehicles
Njeh, M., Cauët, S., & Coirault, P. (2010) · IFAC Proceedings Volumes · doi:10.3182/20100712-3-de-2013.00009 · Cited by 5
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.