A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 401–500 of 2,542
Niri, M. F., Truong, D. Q., Yu, T. F., Marco, J., & Truong, B. N. M. (2020) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2020.3028024 · Cited by 73
Du, W., & Chen, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106465 · Cited by 71
Channel structure design and optimization for immersion cooling system of lithium-ion batteries
Zhu, H., Ma, Y., Jiaqiang, E., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109930 · Cited by 68
Ye, L., Li, C., Wang, C., Zheng, J., Zhong, K., & Wu, T. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113212 · Cited by 71
Sutheesh, P. M., Jose, J., Hotta, T. K., & Bandaru, R. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107937 · Cited by 71
Three‐dimensionai temperature and current distribution in a battery module
Verbrugge, M. W. (1995) · AIChE Journal · doi:10.1002/aic.690410619 · Cited by 91
Design and Optimization of Cooling Plate for Battery Module of an Electric Vehicle
Ye, B., Rubel, M. R. H., & Li, H. (2019) · Applied Sciences · doi:10.3390/app9040754 · Cited by 70
“[26], the heating generation rate of batteries was established below in Equation (6).”
BackgroundElectrothermal Modeling of Lithium-Ion Batteries for Electric Vehicles
Yang, Z., Patil, D., & Fahimi, B. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2880138 · Cited by 67
Full-cycle electrochemical-thermal coupling analysis for commercial lithium-ion batteries
Nie, P., Zhang, S., Ran, A., Yang, C., Chen, S., Li, Z., Zhang, X., Deng, W., Liu, T., Kang, F., et al. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116258 · Cited by 67
Modeling of steady-state convective cooling of cylindrical Li-ion cells
Shah, K., Drake, S. J., Wetz, D. A., Ostanek, J. K., Miller, S. P., Heinzel, J. M., & Jain, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.115 · Cited by 77
Jiang, G., Ling, Z., Hu, Q., Liu, Z., & Huang, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115080 · Cited by 70
Doh, C., Ha, Y., & Eom, S.-W. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.04.026 · Cited by 66
Fong, K., Bergstrom, H., McCloskey, B., et al. (2020) · eScholarship (California Digital Library) · Cited by 66
A Review of Experimental and Numerical Studies of Lithium Ion Battery Fires
Ghiji, M., Edmonds, S., & Moinuddin, K. (2021) · Applied Sciences · doi:10.3390/app11031247 · Cited by 73
Safdari, M., Ahmadi, R., & Sadeghzadeh, S. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119026 · Cited by 67
Large-scale current collectors for regulating heat transfer and enhancing battery safety
Li, L., Yang, J., Tan, R. Q., Shu, W., Low, C. J., Zhang, Z., Zhao, Y., Li, C., Zhang, Y., Li, X., et al. (2024) · Nature Chemical Engineering · doi:10.1038/s44286-024-00103-8 · Cited by 81
Thermoelectrochemical simulations of performance and abuse in 50-Ah automotive cells
Kim, S. U., Albertus, P. S., Cook, D. J., Monroe, C. W., & Christensen, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.080 · Cited by 73
Anthony, D., Wong, D. N., Wetz, D. A., & Jain, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.03.095 · Cited by 72
Gao, Z., Deng, F., Yan, D., Zhu, H., An, Z., & Sun, P. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103490 · Cited by 66
Shen, J., Zhang, Z., Shen, S., Zhang, Y., Chen, Z., & Liu, Y. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122452 · Cited by 73
Fioriti, D., Scarpelli, C., Pellegrino, L., Lutzemberger, G., Micolano, E., & Salamone, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106458 · Cited by 69
Thermal management optimization strategy of electric vehicle based on dynamic programming
Lian, Y., Ling, H., Zhu, J., Lv, J., & Xie, Z. (2023) · Control Engineering Practice · doi:10.1016/j.conengprac.2023.105562 · Cited by 73
Williams, N. P., Trimble, D., & O’Shaughnessy, S. M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108636 · Cited by 71
Mehta, R., & Gupta, A. K. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114264 · Cited by 66
Li, Y., Zhang, N., Jiang, L., Wei, Z., Zhang, Y., Yu, Y., Song, L., Wang, L., Duan, Q., Sun, J., et al. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.03.033 · Cited by 64
Modeling of Lithium-Ion Battery for Energy Storage System Simulation
Chen, S. X., Tseng, K. J., & Choi, S. S. (2009) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2009.4918501 · Cited by 69
“The temperature change of the battery is governed by the thermal energy balance [7] described by”
MethodEstevez, M. A. P., Calligaro, S., Bottesi, O., Caligiuri, C., & Renzi, M. (2021) · Energy · doi:10.1016/j.energy.2021.121296 · Cited by 63
Karimi, D., Hosen, M. S., Behi, H., Khaleghi, S., Akbarzadeh, M., Mierlo, J. V., & Berecibar, M. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e07773 · Cited by 67
“The heat generation of the cell contains the electrochemical reaction loss, the side loss, and the Joule loss, which is explained as follows (Bernardi, 1985): _qgen ¼ _qirr þ _qrev ¼ I ðU VÞ I T ∂U ∂T (2) The Bernardi equation for heat generation consists of reversible heat from the entropy change…”
BackgroundKarlsen, H., Dong, T., Yang, Z., & Carvalho, R. (2019) · IEEE Access · doi:10.1109/access.2019.2943558 · Cited by 75
“The electrochemical processes in the battery cells depend on temperature, and the temperature of the battery cells will vary according to energy conservation (3) [56] even with constant ambient temperature.”
BackgroundInfluentialSamanta, A., & Williamson, S. S. (2021) · Energies · doi:10.3390/en14185960 · Cited by 65
“Often, a battery electrical model is also used to estimate total heat generation using Bernardi’s [16] heat generation model whereas few other models use a mathematical form of battery electro-chemistry to calculate the heat generation.”
MethodEnhancement of battery thermal management system using a novel structure of hybrid liquid cold plate
Rabiei, M., Gharehghani, A., & Andwari, A. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121051 · Cited by 63
Investigation on the heat generation and heat sources of cylindrical NCM811 lithium-ion batteries
Li, X., Chang, X., Feng, Y., Dai, Z., & Zheng, L. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122403 · Cited by 65
Faseena, A. M. F., & Sreekumar, A. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115644 · Cited by 87
Yang, H., & Prakash, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1765771 · Cited by 63
Study of Thermal–Runaway in Batteries I. Theoretical Study and Formulation
Torabi, F., & Esfahanian, V. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3592486 · Cited by 62
Qin, B., Diemant, T., Zhang, H., Hoefling, A., Behm, R. J., Tübke, J., Varzi, A., & Passerini, S. (2019) · ChemSusChem · doi:10.1002/cssc.201900597 · Cited by 61
Study on liquid cooling heat dissipation of Li-ion battery pack based on bionic cobweb channel
Yao, F., Guan, X., Yang, M., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107588 · Cited by 62
Wang, J., Mei, W., Mao, B., & Wang, Q. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121080 · Cited by 64
Afraz, M. V., Mohammadi, Z. A., & Karimi, G. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117927 · Cited by 60
Cylindrical battery thermal management based on microencapsulated phase change slurry
Pakrouh, R., Hosseini, M. J., Bahrampoury, R., Ranjbar, A. A., & Borhani, S. M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102602 · Cited by 62
Duh, Y., Liu, X., Jiang, X., Kao, C., Gong, L., & Shi, R. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101422 · Cited by 65
Thermal cooling characteristics of Li‐ion battery pack with thermoelectric ferrofluid cooling module
Sirikasemsuk, S., Wiriyasart, S., Naphon, P., et al. (2021) · International Journal of Energy Research · doi:10.1002/er.6417 · Cited by 61
“The changing sign of this term depends on the charged and discharged processes, and it equal to zero as there is no current in the system.(55) The reversible heat dominates for a low current rate and the irreversible heat for a high current rate.”
BackgroundSaqli, K., Bouchareb, H., M’Sirdi, N. K., & Bentaie, M. O. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107072 · Cited by 67
Yang, T., Lin, P.-Y., Lin, C.-Y., Yan, W., & Rashidi, S. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.103809 · Cited by 64
Wu, C., Ni, J., Shi, X., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122107 · Cited by 61
An Efficient Parallelizable 3D Thermoelectrochemical Model of a Li-Ion Cell
Christensen, J., Cook, D. J., & Albertus, P. S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.086311jes · Cited by 69
Detailed study of heat generation in porous LiCoO2 electrodes
Heubner, C., Schneider, M., & Michaelis, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.096 · Cited by 68
Liu, Y., Ouyang, C., Jiang, Q., & Liang, B. (2015) · Journal of Central South University · doi:10.1007/s11771-015-2941-8 · Cited by 61
Thermally driven convection in Li||Bi liquid metal batteries
Personnettaz, P., Beckstein, P., Landgraf, S., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.069 · Cited by 61
Hong, S., Zhang, X., Wang, S., & Zhang, Z. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.04.003 · Cited by 61
Charging control strategies for lithium‐ion battery packs: Review and recent developments
Ghaeminezhad, N., & Monfared, M. (2021) · IET Power Electronics · doi:10.1049/pel2.12219 · Cited by 74
Wei, L.-S., Liu, H., Tang, C.-G., et al. (2024) · Energy · doi:10.1016/j.energy.2024.131886 · Cited by 60
Thermal parameters determination of battery cells by local heat flux measurements
Murashko, K., Mityakov, A. V., Pyrhonen, J. J., Mityakov, V. Y., & Сапожников, С. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.117 · Cited by 60
Jaguemont, J., Omar, N., Abdel-Monem, M., den Bossche, P. V., & Mierlo, J. V. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.068 · Cited by 61
García, A., Serrano, J. M., Sari, R. L., & Martínez-Boggio, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117884 · Cited by 61
Optimization Investigation on Air Phase Change Material Based Battery Thermal Management System
Lin, X.-W., Zhang, X., Liu, L., & Yang, M. (2021) · Energy Technology · doi:10.1002/ente.202100060 · Cited by 60
Chen, G., Sun, K., Song, K., Zhang, K., & Hou, Q. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110512 · Cited by 63
Feng, S., Shan, S., Lai, C., Chen, J., Li, X. S., & Mori, S. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118383 · Cited by 62
Shen, J., Mohammed, H. I., Chen, S., et al. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104752 · Cited by 59
A Review on Advanced Battery Thermal Management Systems for Fast Charging in Electric Vehicles
Tai, L. D., Garud, K. S., Hwang, S.-G., & Lee, M. (2024) · Batteries · doi:10.3390/batteries10100372 · Cited by 88
“…by the sum of the heat between reversible heating Q rev and irreversible heating Q irr , in which entropy generation leads to reversible heating and Joule heating leads to irreversible heating and is represented as below [24], where I represents the battery current during charging or discharging.”
Kim, U. S., Yi, J., Shin, C. B., Han, T., & Park, S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.146306jes · Cited by 65
Li, J., Sun, D., Chai, Z., Jiang, H., & Sun, C. (2019) · Energy · doi:10.1016/j.energy.2019.07.128 · Cited by 59
A Li-Ion Battery Thermal Management System Combining a Heat Pipe and Thermoelectric Cooler
Zhang, C., Xia, Z., Wang, B., Gao, H., Chen, S.-R., Zong, S., & Luo, K. (2020) · Energies · doi:10.3390/en13040841 · Cited by 64
A Control-Oriented Electrothermal Model for Pouch-Type Electric Vehicle Batteries
Hu, X., Liu, W., Lin, X., Xie, Y., Foley, A. M., & Hu, L. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3027561 · Cited by 60
“developed by assuming that its thermal dynamics are represented by its bulk temperature [12], [13], which has been broadly used”
BackgroundMethodThermal Management of a Cylindrical Lithium-Ion Battery Module Using a Multichannel Wavy Tube
Tang, Z., Min, X., Song, A., et al. (2018) · Journal of Energy Engineering · doi:10.1061/(asce)ey.1943-7897.0000592 · Cited by 58
Vikram, S., Vashisht, S., & Rakshit, D. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105737 · Cited by 65
Tousi, M., & Najafi, M. (2023) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2023.108634 · Cited by 60
Single-phase static immersion-cooled battery thermal management system with finned heat pipes
Huang, H., Li, W., Xiong, S., et al. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123931 · Cited by 58
Shen, P., Zhao, Z., Zhan, X., & Li, J. (2017) · Energy · doi:10.1016/j.energy.2017.01.120 · Cited by 56
Zhu, C., Lu, F., Zhang, H., et al. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2852218 · Cited by 57
“The general energy balanced battery thermal model is developed in [10] for estimating the heat generation rate of”
BackgroundAn eco-driving strategy for electric vehicle based on the powertrain
Liao, P., Tang, T., Liu, R., & Huang, H. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117583 · Cited by 57
Hai, T., Abidi, A., Abed, A. M., Zhou, J., Malekshah, E. H., & Aybar, H. Ş. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232117 · Cited by 57
Lagnoni, M., Scarpelli, C., Lutzemberger, G., & Bertei, A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112326 · Cited by 64
Liu, Z., Huadan, C., Wang, B., & Li, P. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109372 · Cited by 60
Zheng, B., Deng, Z., Luo, Z., Mao, S., Ouyang, M., Han, X., Wang, H., Li, Y., Sun, Y., Wang, D., et al. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126688 · Cited by 76
Downie, L. E., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0301412jes · Cited by 57
Simplified Heat Generation Model for Lithium ion battery used in Electric Vehicle
Ismail, N. H. F., Toha, S. F., Azubir, N. A. M., Ishak, N. H. M., Hassan, M. K., & Ibrahim, B. S. K. K. (2013) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/53/1/012014 · Cited by 75
Kim, Y., Siegel, J. B., & Stefanopoulou, A. G. (2013) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2013.6579917 · Cited by 67
“A single or volume-averaged temperature model is used in [5].”
MethodOptimal charging of batteries via a single particle model with electrolyte and thermal dynamics
Perez, H. E., Hu, X., & Moura, S. J. (2016) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2016.7525538 · Cited by 64
“The Thermal Model from [26] is coupled to the SPMe to form the SPMeT (see Fig.”
MethodA reduced order electrochemical thermal model for lithium ion cells
Gambhire, P., Ganesan, N., Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Oh, D., Yeo, T., & Doo, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.179 · Cited by 56
Thermal Management of Large-Format Prismatic Lithium-Ion Battery in PHEV Application
Lundgren, H., Svens, P. I., Ekström, H., Tengstedt, C., Lindström, J., Behm, M., & Lindbergh, G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.09411602jes · Cited by 61
Mei, W., Duan, Q., Zhao, C., Lu, W. M., Sun, J., & Wang, Q. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119082 · Cited by 55
Zheng, Y., Che, Y., Hu, X., Sui, X., & Teodorescu, R. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3294417 · Cited by 65
“Therefore, a simplified equation can be used to capture the internal heat generation of the cell, which is expressed as [28] where I , V oc , and V t denote the current (positive for charging and negative for discharging), open-circuit voltage (OCV), and terminal voltage, respectively, and ∂ V oc ∂…”
Fu, P., Zhao, L., Wang, X., Sun, J., & Xin, Z. (2023) · Processes · doi:10.3390/pr11123450 · Cited by 70
“At present, the analysis of the principle of battery heat generation is mostly based on Bernardi’s battery heat generation theory [7].”
InfluentialTang, Z., Yu, P., Li, M., Tao, C., & Cheng, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113350 · Cited by 63
A coupled nonlinear equivalent circuit – Thermal model for lithium ion cells
Hariharan, K. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.044 · Cited by 56
Electrochemical and thermal modeling of lithium-ion cells for use in HEV or EV application
Benger, R., Wenzl, H., Beck, H.-P., et al. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3020342 · Cited by 56
Planning low-carbon distributed power systems: Evaluating the role of energy storage
Mao, J., Jafari, M., & Botterud, A. (2021) · Energy · doi:10.1016/j.energy.2021.121668 · Cited by 63
“chemical batteries are extremely sensitive to operation [22].”
BackgroundZhou, Y., Deng, H., Li, H., et al. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3061426 · Cited by 55
“Many efforts have been made to capture such heat generation analytically based on equivalent circuit models [3] or first-principle models [23]–[25].”
BackgroundBulut, E., Albak, E. İ., Sevi̇lgen, G., & Öztürk, F. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101452 · Cited by 59
Xu, Z., Xu, J., Guo, Z., Wang, H., Sun, Z., & Mei, X. (2022) · Energies · doi:10.3390/en15041421 · Cited by 55
Zhao, Z., Panchal, S., Kollmeyer, P. J., et al. (2022) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2022-01-0711 · Cited by 55
Yang, L., Zhou, F., Sun, L., & Wang, S. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231605 · Cited by 57
Sarchami, A., Tousi, M., Kiani, M., Arshadi, A., Najafi, M., Darab, M., & Houshfar, E. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107823 · Cited by 59
Yao, F., Guan, X., Chen, Q., & Lin, L. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110447 · Cited by 69
Zhou, L., Li, S., Jain, A., et al. (2024) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4066725 · Cited by 55
Thermal analysis of a Li-ion battery module under realistic EV operating conditions
Awarke, A., Jaeger, M., Oezdemir, O., & Pischinger, S. (2012) · International Journal of Energy Research · doi:10.1002/er.2884 · Cited by 61
“The following source term, which was initially derived in [13], was used in the energy balance (1):”
MethodReal-time battery thermal management for electric vehicles
Kim, E., Shin, K. G., & Lee, J. (2014) · ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS) · doi:10.1109/iccps.2014.6843712 · Cited by 59
“(5) shows Bernardi’s energy balance [3], and it can explain cell temperature (Tcell) variation by heat generation (Qd) as shown in Fig.”
BackgroundMurashko, K., Mityakov, A. V., Mityakov, V. Y., Sapozhnikov, S. Z., Jokiniemi, J. K., & Pyrhonen, J. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.130 · Cited by 55
A support approach for the modular design of Li-ion batteries: A test case with PCM
Cicconi, P., Kumar, P., & Varshney, P. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101684 · Cited by 57
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.