A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 101–200 of 2,542
Jiang, Z. Y., Li, H. B., Qu, Z. G., & Zhang, J. F. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.01.008 · Cited by 207
Huang, R., Li, Z., Hong, W., Wu, Q., & Yu, X. (2020) · Energy Reports · doi:10.1016/j.egyr.2019.09.060 · Cited by 210
Mathematical Modeling of Lithium Batteries
Thomas, K. E., Newman, J., & Darling, R. M. (2002) · Advances in Lithium-Ion Batteries · doi:10.1007/0-306-47508-1_13 · Cited by 206
Self-citationThermal modelling of Li-ion polymer battery for electric vehicle drive cycles
Chacko, S., & Chung, Y. M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.015 · Cited by 205
Battery thermal management system based on the forced-air convection: A review
Qin, P., Sun, J., Yang, X., & Wang, Q. (2021) · eTransportation · doi:10.1016/j.etran.2020.100097 · Cited by 204
Coman, P. T., Darcy, E. C., Veje, C. T., & White, R. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0341704jes · Cited by 199
Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells
Hunt, I. A., Zhao, Y., Patel, Y., & Offer, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0361609jes · Cited by 199
Chen, S., Peng, X., Bao, N., & Garg, A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.089 · Cited by 199
Alipour, M., Ziebert, C., Conte, F. V., & Kizilel, R. (2020) · Batteries · doi:10.3390/batteries6030035 · Cited by 200
Guo, J., & Jiang, F. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114145 · Cited by 198
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Modelling the thermal behaviour of a lithium-ion battery during charge
Kim, U. S., Yi, J., Shin, C. B., Han, T., & Park, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.103 · Cited by 195
Northrop, P. W. C., Ramadesigan, V., De, S., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.058112jes · Cited by 197
Jiang, G., Huang, J., Liu, M., & Cao, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.107 · Cited by 194
Ibrahim, A., & Jiang, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111049 · Cited by 194
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
Sensorless Battery Internal Temperature Estimation Using a Kalman Filter With Impedance Measurement
Richardson, R. R., & Howey, D. A. (2015) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2015.2420375 · Cited by 191
“A commonly employed expression for the heat source in a lithium ion battery is which is a simplified version of the expression first proposed by Bernardi et al [20].”
Thermal Analysis of Spirally Wound Lithium Batteries
Chen, S.-C., Wang, Y.-Y., & Wan, C.-C. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2168051 · Cited by 191
Zhang, X., Mi, C. C., Masrur, A., & Daniszewski, D. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.046 · Cited by 192
“The battery temperature change is determined by the thermal energy balance expressed as [20]”
BackgroundZhao, Y., Zou, B., Zhang, T., Jiang, Z., Ding, J., & Ding, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112667 · Cited by 191
Status and development of electric vehicle integrated thermal management from BTM to HVAC
Zhang, T., Gao, C., Gao, Q., Wang, G., Liu, M., Guo, Y., Xiao, C., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.001 · Cited by 189
Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell
Zavalis, T. G., Behm, M., & Lindbergh, G. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.096206jes · Cited by 186
Schimpe, M., Naumann, M., Truong, N., Hesse, H. C., Santhanagopalan, S., Saxon, A., & Jossen, A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.10.129 · Cited by 185
Assat, G., Glazier, S. L., Delacourt, C., & Tarascon, J.-M. (2019) · Nature Energy · doi:10.1038/s41560-019-0410-6 · Cited by 184
Peng, P., Wang, Y., & Jiang, F. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118293 · Cited by 187
Gerver, R. E., & Meyers, J. P. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3591799 · Cited by 184
An, Z., Chen, X., Zhao, L., & Gao, Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114345 · Cited by 182
Naturalistic Data-Driven Predictive Energy Management for Plug-In Hybrid Electric Vehicles
Tang, X., Jia, T., Hu, X., Huang, Y., Deng, Z., & Pu, H. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3025352 · Cited by 183
“Therefore, the total heat output of the battery can be expressed as [41] where I is the current of the battery cell, r is the internal resistance of the battery cell, T is the temperature of the battery cell, and dE oc / dT is the temperature influence coefficient of the battery, which is an…”
BackgroundLi, Y., Zhou, Z., & Wu, W.-T. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.009 · Cited by 182
Temperature, Ageing and Thermal Management of Lithium-Ion Batteries
Spitthoff, L., Shearing, P. R., & Burheim, O. S. (2021) · Energies · doi:10.3390/en14051248 · Cited by 181
“[72] presented one of the first thermal models by deriving a general energy balance for battery systems with heat generation due to phase changes, enthalpy of mixing and enthalpy of reaction consisting of heat due to overpotential, ohmic heating and entropic heat.”
BackgroundConnecting battery technologies for electric vehicles from battery materials to management
Zhao, G., Wang, X., & Negnevitsky, M. (2022) · iScience · doi:10.1016/j.isci.2022.103744 · Cited by 180
“Bernardi et al. (Bernardi et al., 1985) developed a basic energy balance equation to predict battery thermal performance.”
BackgroundZhang, X., Liu, L., Zhao, Z., Tu, B., Ou, D., Cui, D., Wei, X., Chen, X., & Cheng, M. (2015) · Nano Letters · doi:10.1021/nl5043566 · Cited by 180
Soltani, M., & Beheshti, S. H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102019 · Cited by 176
Temperature prediction of lithium-ion battery based on artificial neural network model
Wang, Y., Chen, X., Li, C., Yu, Y., Zhou, G., Wang, C., & Zhao, W. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120482 · Cited by 178
Electro-thermal cycle life model for lithium iron phosphate battery
Ye, Y., Shi, Y., & Tay, A. A. O. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.055 · Cited by 177
An, Z., Jia, L., Wei, L., Dang, C., & Peng, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.014 · Cited by 173
Tousi, M., Sarchami, A., Kiani, M., Najafi, M., & Houshfar, E. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102910 · Cited by 170
Yang, R., Xiong, R., Ma, S., & Lin, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114253 · Cited by 170
Emerging trends in anion storage materials for the capacitive and hybrid energy storage and beyond
Dou, Q., Wu, N., Yuan, H., Shin, K. H., Tang, Y., Mitlin, D., & Park, H. S. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00721h · Cited by 168
Velumani, D., & Bansal, A. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c02889 · Cited by 169
Two-dimensional electrochemical–thermal coupled modeling of cylindrical LiFePO4 batteries
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.070 · Cited by 167
Qin, Y., Du, J., Lu, L., Gao, M., Haase, F., Li, J., & Ouyang, M. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115957 · Cited by 161
Goutam, S., Nikolian, A., Jaguemont, J., Smekens, J., Omar, N., Van Dan Bossche, P., & Van Mierlo, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.206 · Cited by 161
Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries
Williford, R. E., Viswanathan, V. V., & Zhang, J.-G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.078 · Cited by 162
Pilon, L., Wang, H., & d’Entremont, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211505jes · Cited by 159
A pseudo three-dimensional electrochemical-thermal model of a cylindrical LiFePO4/graphite battery
Chiew, J., Chin, C. S., Toh, W. D., Gao, Z., Jia, J., & Zhang, C. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.108 · Cited by 162
Yang, R., Xiong, R., Shen, W., & Lin, X. (2021) · Engineering · doi:10.1016/j.eng.2020.08.015 · Cited by 158
“where h is the convection coefficient; Tamb is the ambient temperature; T is the temperature of the cell; Cp, V, A, q, and t represent the battery specific heat capacity, volume, surface area, density, and time, respectively; q is the heat generation [22,23], which can be computed as”
BackgroundBabu Sanker, S., & Baby, R. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104606 · Cited by 160
An electrochemical modeling of lithium-ion battery nail penetration
Chiu, K.-C., Lin, C.-H., Yeh, S.-F., Lin, Y.-H., & Chen, K.-C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.069 · Cited by 159
Recent Insights into Rate Performance Limitations of Li‐ion Batteries
Heubner, C., Nikolowski, K., Reuber, S., Schneider, M., Wolter, M., & Michaelis, A. (2021) · Batteries & Supercaps · doi:10.1002/batt.202000227 · Cited by 161
Numerical investigation of water cooling for a lithium-ion bipolar battery pack
Tong, W., Somasundaram, K., Birgersson, E., Mujumdar, A. S., & Yap, C. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.03.005 · Cited by 158
Mei, W., Chen, H., Sun, J., & Wang, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.075 · Cited by 158
Kiani, M., Omiddezyani, S., Houshfar, E., Miremadi, S. R., Ashjaee, M., & Mahdavi Nejad, A. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115840 · Cited by 159
“[50], proposed a heat generation equation to estimate the heat generation rate in the cells of a LIB as a result of electrochemical processes, as follows: Fig.”
BackgroundXin, Q., Xiao, J., Yang, T., Zhang, H., & Long, X. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118230 · Cited by 152
Fan, Y., Wang, Z., Fu, T., et al. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122143 · Cited by 156
Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries
Zhang, J., Wu, B., Li, Z., & Huang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.079 · Cited by 157
Mohammadian, S. K., Rassoulinejad-Mousavi, S. M., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.056 · Cited by 161
“[30] is the most commonly used expression.”
Battery Thermal Management Systems: Current Status and Design Approach of Cooling Technologies
Buidin, T. I. C., & Mariasiu, F. E. (2021) · Energies · doi:10.3390/en14164879 · Cited by 184
Feng, Y., Jiaqiang, E., Zhang, B., Zuo, H., Wei, K., Chen, J., Zhu, H. Y., Zhu, H., & Deng, Y. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.09.073 · Cited by 160
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 165
“[25] that included reversible entropic heat, heat generated by the resistive dissipation, mixing heat due to relaxation of concentration gradients in the cell, and heat produced by chemical reactions occurring inside of the cell [1].”
BackgroundZhou, H., Dai, C., Liu, Y., Fu, X., & Du, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228545 · Cited by 159
Thomas, K. E., Bogatu, C., & Newman, J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1369365 · Cited by 154
Self-citationLi, K., Yan, J., Chen, H., & Wang, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.131 · Cited by 155
Yang, S.-C., Hua, Y., Qiao, D., Lian, Y.-B., Pan, Y.-W., & He, Y.-L. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134928 · Cited by 152
Measurements of heat generation in prismatic Li-ion batteries
Chen, K., Unsworth, G., & Li, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.037 · Cited by 156
Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow
Cao, W., Zhao, C., Wang, Y., Dong, T., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.137 · Cited by 152
Guo, R., & Li, L. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.122706 · Cited by 160
Mama, M., Solaï, E., Capurso, T., Danlos, A., & Khelladi, S. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119223 · Cited by 168
“…identify the different thermal and electrochemical coupling approaches, three main models are presented to describe the battery internal heat generation: the Bernardi model [155, 156], the electro-thermal coupled model (ETC) [157], and the electrochemical-thermal coupled (ECTC) model [19,157].”
Lithium Ion Battery Models and Parameter Identification Techniques
Barcellona, S., & Piegari, L. (2017) · Energies · doi:10.3390/en10122007 · Cited by 149
“[18], developed a one-dimensional model that could predict the temperature of a lithium ion cell.”
BackgroundKim, Y., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., & Ding, Y. (2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2309492 · Cited by 147
Ping, P., Zhang, Y., Kong, D., et al. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102448 · Cited by 148
AlKhedher, M. A., Tahhan, A. B. A., Yousaf, J., Ghazal, M. A., Shahbazian‐Yassar, R., & Ramadan, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111172 · Cited by 168
Cordoba-Arenas, A., Onori, S., & Rizzoni, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.048 · Cited by 163
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Yi, J., Kim, U. S., Shin, C. B., Han, T., & Park, S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.039303jes · Cited by 155
A Review of Lithium-Ion Battery Thermal Management System Strategies and the Evaluate Criteria
Yang, S., Ling, C., Fan, Y., Yang, Y., Tan, X., & Dong, H. (2019) · International Journal of Electrochemical Science · doi:10.20964/2019.07.06 · Cited by 144
Effect of liquid cooling system structure on lithium-ion battery pack temperature fields
Ding, Y., Ji, H., Wei, M., & Liu, R. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122178 · Cited by 144
Heat generation and thermal runaway mechanisms induced by overcharging of aged lithium-ion battery
Liu, J., Wang, Z., Bai, J., Gao, T., & Mao, N. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118565 · Cited by 151
Thermal Design for the Pouch-Type Large-Format Lithium-Ion Batteries
Wu, B., Li, Z., & Zhang, J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0831501jes · Cited by 142
Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries
Ghalkhani, M., Bahiraei, F., Nazri, G., & Saif, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.164 · Cited by 152
Xie, Y., He, X.-J., Hu, X.-S., Li, W., Zhang, Y., Liu, B., & Sun, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114455 · Cited by 144
Verbrugge, M. W., & Conell, R. S. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1426395 · Cited by 155
Xiao, M., & Choe, S.-Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.062 · Cited by 145
Temperature-dependent electrochemical heat generation in a commercial lithium-ion battery
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.015 · Cited by 146
Monika, K., & Datta, S. P. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114936 · Cited by 151
Choudhari, V. G., Dhoble, A. S., Panchal, S., Fowler, M. W., & Fraser, R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103234 · Cited by 140
Smart batteries for powering the future
Meng, Q., Huang, Y., Li, L., Wu, F., & Chen, R. (2024) · Joule · doi:10.1016/j.joule.2024.01.011 · Cited by 150
Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions
Ping, P., Wang, Q., Chung, Y. M., & Wen, J. X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.073 · Cited by 140
“The difference between the equilibrium voltage U and the cell voltage (Vp–Vn) is the cell overpotential, which is related with irreversibility such as ohmic losses, charge-transfer overpotentials, and mass-transfer limitations [29].”
BackgroundInfluentialHe, C., Yue, Q. L., Wu, M., Chen, Q., & Zhao, T. S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121855 · Cited by 160
Li, D., Wang, L., Duan, C., Li, Q., & Wang, K. (2022) · International Journal of Energy Research · doi:10.1002/er.7905 · Cited by 149
Xiong, B., Zhao, J., Wei, Z., & Skyllas‐Kazacos, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.110 · Cited by 140
Xie, Y., Tang, J., Shang, S., Xing, Y., Wu, H., Hu, Z., & Wen, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.046 · Cited by 141
“During the charge and discharge 284 process, the heat generation rate mainly includes irreversible Joule heat, reversible heat from the 285 electrochemical reactions, heat from side reactions and heat of mixing [34].”
BackgroundXin, S., Wang, C., & Xi, H. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120100 · Cited by 146
Bahiraei, F., Ghalkhani, M., Fartaj, A., & Nazri, G. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.060 · Cited by 146
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries
Hu, X., Liu, W., Lin, X., & Xie, Y. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2953606 · Cited by 135
“For instance, the lumped-mass model (0-D model), where its thermal dynamics are simplified and represented by a bulk temperature [15], [16], has been broadly used in the thermal analysis of battery modules or packs due to its extremely high computational efficiency.”
BackgroundXu, F., Meng, C., Yang, Y., Lin, J., Li, W., Zhao, Y., Xie, S. J., & Jiang, C. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108239 · Cited by 137
Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell
Schuster, E., Ziebert, C., Melcher, A. M., Rohde, M., & Seifert, H. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.170 · Cited by 146
Multiscale modeling of lithium ion batteries: thermal aspects
Latz, A., & Zausch, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.102 · Cited by 139
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.