A General Energy Balance for Battery Systems
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index; 2 of the 20 sources its claims cite were checked for support.
Abstract
A general energy balance for battery systems has been developed. This equation is useful for estimating cell thermal characteristics. Reliable predictions of cell temperature and heat‐generation rate are required for the design and thermal management of battery systems. The temperature of a cell changes as a result of electrochemical reactions, phase changes, mixing effects, and joule heating. The equation developed incorporates these effects in a complete and general manner. Simplifications and special cases are discussed. The results of applying the energy balance to a mathematical model of the cell discharged through two different reaction mechanisms are given as examples. The examples illustrate how the energy equation may be applied to a specific system to examine the relative contributions corresponding to the terms in the equation. The examples show that the processes involved in cell heat generation may be complex and that the application of a sufficiently general energy equation is advantageous.
Overview
CoChat Summary
TL;DR
The paper derives a general energy balance for battery systems that includes mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials. It applies the equation to a modeled LiAl/LiCl-KCl/FeS cell discharged by two mechanisms and to a lead-acid estimate, showing that cell heat generation can be complex and that a sufficiently general energy equation is advantageous.
Key findings
- A general energy balance is developed that includes energy contributions from mixing, phase changes, and simultaneous electrochemical reactions with composition-dependent open-circuit potentials; prior treatments were restricted to single pure-phase reactants or a single reaction without mixing effects.
- For the LiAl/FeS model, adiabatic-reversible discharge gives the same temperature at 100% depth of discharge for both mechanisms because the overall reaction is the same; slope discontinuities occur at 50% and 12% utilization for mechanisms 1 and 2, respectively. In the realistic simulations, the second reaction begins at 30% and 11% utilization for mechanisms 1 and 2, respectively.
- The mixing term is negligible in the LiAl/FeS example; at 25% utilization, the temperature decline after current interruption is only about 0.2 K. For a lead-acid cell, the estimated temperature rise after full discharge is approximately 1.6 K, or 2.9 K if 1.25 mol of PbO2 is allowed for discharge.
- The sign of the mixing effect depends on the enthalpy curve: for lead-acid, the sulfuric acid-water enthalpy curve is concave upward, so a well-insulated cell heats after current interruption; for the high-temperature LiCl-KCl cell, the curve is concave downward, so the cell cools after interruption. Neglecting mixing overestimates lead-acid operating temperature and underestimates high-temperature cell operating temperature.
Methods
- The paper derives the energy balance from the first law of thermodynamics, assuming uniform battery temperature, and presents a final general equation including reaction, heat-capacity, phase-change, mixing, electrical-work, and heat-transfer terms.
- The equation is applied to an existing one-dimensional mathematical model of the LiAl/LiCl-KCl/FeS cell with a porous LiAl negative electrode, porous FeS positive electrode, electrolyte reservoir, and separator under galvanostatic discharge, using the two reaction mechanisms in Table I.
- Appendix A estimates the lead-acid temperature rise using an assumed uniform 5 molal sulfuric acid electrolyte, with one-third of the electrolyte in the cathode and anode spaces and one-third between the electrodes; the analysis compares adiabatic-reversible profiles with model simulations and examines the relative contributions of terms.
Limitations
- The paper states that the rigorous energy balance is difficult to apply without a detailed mathematical model because instantaneous composition profiles and current fractions are required; in practice, obtaining concentration profiles and predicting current partitioning among possible reactions is difficult.
- The paper states that the analysis does not include enthalpy changes from nonfaradaic reactions; self-discharge or corrosion must be divided into anodic and cathodic components and included as an additional term. The mixing term is also difficult because it involves integrations of concentration profiles.
- The paper states that actual FeS discharge is complicated and more like a mixture of the two proposed mechanisms plus simultaneously occurring chemical reactions; the examples are model simulations. The lead-acid estimate assumes artificial concentration jumps at interfaces, and diffusion would lower the estimate; nonuniform reaction distribution in porous electrodes would make the concentration distribution nonuniform. The breakdown is presented only up to 30% utilization because oscillatory behavior begins when the second reaction starts, to be treated in a subsequent publication.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 5 Not valid · 12 Not checked · 75 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Basing the discharge on two Farādays (1 mol PbOg) and a transference number of 0.74 for hydrogen ion, we may calculate that the concentration in the cathode space and anode space drops to 1.04 and 2.79 molal, respectively (14).”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available text in the book-review passage (section labeled “Notice to Members April 1 is Cut-Off Date”; page not provided) describes the book’s theoretical treatment of lead-acid batteries but does not give this calculation. Searches for the 0.74 hydrogen-ion transference number, two Faradays, and the 1.04 and 2.79 molal concentrations found no passage addressing the claimed values. (LLM, conf=0.76)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Could not verify
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The temperature rise, after full discharge, is approximately 1.6 K.”
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
“Using the data available in Ref. (14) (for 298 K), we calculate the temperature rise to be about 1.6 K”
What the sources say
- Could not verifycites [14] 14. Hans Bode, "Lead-Acid Batteries," R. J. Brodd and K. V. Kordesch, Translators, Wiley-Interscience, New York (1977). sourceExperimental — accuracy not yet measured
The available passages from the book review (page not provided) describe the book’s coverage of lead-acid battery thermodynamics but give no temperature rise after full discharge. Searches for “1.6 K” and the discharge-temperature claim found no supporting passage in our copy. (LLM, conf=0.75)
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
- Also stated in: § Estimate of the Temperature Rise in a Lead-Acid Cell Following Current Interruption · p. 8 · hedged
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Although the mixing term offers a negligible contribution to the energy balance, it is interesting to investigate the processes that determine its behavior.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The profile for the X-phase mechanism in Fig. 1 follows the adiabatic-reversible profile up to about 5% utilization because the heat-loss contribution tends to cancel the polarization heat.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“A general energy balance for battery systems has been developed.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
39 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 33
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Conclusions · p. 8
“Equation [23], written for a single cell reaction, is the energy equation most commonly used in battery applications.”
§ Discussion of Terms · p. 5
“Furthermore, Eq. [24] is the form of the energy balance that is most commonly encountered in the literature.”
Citations
Cites
The publisher hasn’t deposited this paper’s reference list.
Research works printed but not linked: 12
- [1]1. J. M. Sherfey and A. Brenner, This Journal, 105, 665 (1958).
- [3]3. H. F. Gibbard, This Journal, 125, 353 (1978).
- [2]2. S. Gross, Energy Convers., 9, 55 (1969).
- [4]4. I. A. Dibrov and V. A. Bykov, Sov. Electrochem., 13, 298 (1977).
- [6]6. L. D. Hansen and R. M. Hart, This Journal, 125, 842 (1978).
- [5]5. I. A. Dibrov and V. A. Bykov, J. Appl. Chem., 49, 2025 (1977).
- [7]7. F. B. Tudron, ibid., 128, 516 (1981).
- [9]9. W. H. Tiedemann and J. Newman, in "Battery Design and Optimization," S. Gross, Editor, pp. 23-38, The Electrochemical Society Softbound Proceedings Series, Princeton, NJ (1979).
- [8]8. D. M. Chen and H. F. Gibbard, ibid., 130, 1975 (1983).
- [10]10. Richard Pollard and John Newman, This Journal, 128, 491 (1981).
- [11]11. Richard Pollard and John Newman, ibid., 128, 502 (1981).
- [13]13. Z. Tomczuk, S. K. Preto, and M. F. Roche, This Journal, 128, 760 (1981).
Cited by
Items 201–300 of 2,542
Du, S., Lai, Y., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.04.077 · Cited by 138
Wang, J., Liu, X., Fen, L., et al. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101124 · Cited by 134
Trends in electric vehicles research
Haghani, M., Sprei, F., Kazemzadeh, K., Shahhoseini, Z., & Aghaei, J. (2023) · Transportation Research Part D Transport and Environment · doi:10.1016/j.trd.2023.103881 · Cited by 195
A reduced low-temperature electro-thermal coupled model for lithium-ion batteries
Jiang, J., Ruan, H., Sun, B., Zhang, W., Gao, W., Wang, L. Y., & Zhang, L. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.153 · Cited by 133
Wang, Q., He, Y., Shen, J.-N., Ma, Z., & Zhong, G. (2017) · Energy · doi:10.1016/j.energy.2017.07.035 · Cited by 144
Park, S., Ahn, J., Kang, T., Park, S., Kim, Y., Cho, I., & Kim, J. (2020) · Journal of Power Electronics · doi:10.1007/s43236-020-00122-7 · Cited by 158
Wang, X., Xie, Y., Day, R., Wu, H., Hu, Z., Zhu, J., & Wen, D. (2018) · Energy · doi:10.1016/j.energy.2018.05.104 · Cited by 137
Sheng, L., Su, L., Zhang, H., Fang, Y., Xu, H., & Ye, W. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.030 · Cited by 134
Optimization design and numerical study on water cooling structure for power lithium battery pack
Tang, A., Li, J., Lou, L., Shan, C., & Yuan, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113760 · Cited by 129
Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles
Saw, L. H., Ye, Y., & Tay, A. A. O. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.016 · Cited by 136
Finite Element Thermal Model and Simulation for a Cylindrical Li-Ion Battery
Wang, Z., Ma, J., & Zhang, L. (2017) · IEEE Access · doi:10.1109/access.2017.2723436 · Cited by 126
“presented a pioneering work by introducing a general energy balance for battery thermal modeling, in which a uniform temperature throughout the cell is assumed [13].”
BackgroundFen, L., Wang, J., Liu, Y., et al. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117296 · Cited by 126
Bazinski, S. J., & Wang, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.084 · Cited by 131
Experimental and analytical study on heat generation characteristics of a lithium-ion power battery
Xie, Y., Shang, S., Tang, J., Wu, H., & Yu, J. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.038 · Cited by 134
Gao, R., Fan, Z., & Liu, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104014 · Cited by 131
Ma, J., Sun, Y., Zhang, S., Li, J., & Li, S. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.115183 · Cited by 124
A systematic review of thermal management techniques for electric vehicle batteries
Kharabati, S., & Saedodin, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109586 · Cited by 150
Jindal, P., Katiyar, R., & Bhattacharya, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117794 · Cited by 121
Togun, H., Aljibori, H. S. S., Biswas, N., Mohammed, H. I., Sadeq, A. M., Rashid, F. L., Abdulrazzaq, T., & Zearah, S. A. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114732 · Cited by 125
Worwood, D., Kellner, Q., Wojtala, M., Widanage, W. D., McGlen, R. J., Greenwood, D. G., & Marco, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.023 · Cited by 129
“The volumetric heat generation within the cell bulk material (not including heat pipe or spreader discs) is assumed to comprise of solely irreversible heat generation mechanisms, whereby entropic heating and other modes of heat generation [34] are ignored.”
BackgroundThe effect of battery design parameters on heat generation and utilization in a Li-ion cell
Wu, W., Xiao, X., & Huang, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.081 · Cited by 133
Development of an Advanced Two-Dimensional Thermal Model for Large size Lithium-ion Pouch Cells
Samba, A., Omar, N., Gualous, H., Firouz, Y., Van den Bossche, P., Van Mierlo, J., & Boubekeur, T. I. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.113 · Cited by 118
Kang, D., Lee, P., Yoo, K., & Kim, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101017 · Cited by 124
Xu, X., Li, W., Xu, B. L., & Qin, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.180 · Cited by 118
Heat generation and thermal runaway of lithium-ion battery induced by slight overcharging cycling
Liu, J., Huang, Z., Sun, J., & Wang, Q. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231136 · Cited by 126
Lai, C., Shan, S., Feng, S., Chen, Y., Zeng, J., Song, J., & Fu, L. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.116812 · Cited by 125
Xia, Q., Wang, Z., Ren, Y., Sun, B., Yang, D., & Feng, Q. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.036 · Cited by 120
Min, H., Zhang, Z., Sun, W., Min, Z., Yu, Y., & Wang, B. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115944 · Cited by 113
Kausthubharam, K., Koorata, P. K., & Neelakandan, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116961 · Cited by 128
Xie, N., Zhang, Y., Liu, X., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121341 · Cited by 114
Wahab, A., Najmi, A.-U.-H., Senobar, H., Amjady, N., Kemper, H., & Khayyam, H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.115268 · Cited by 127
Lin, X., Fu, H., Perez, H. E., Siege, J. B., Stefanopoulou, A. G., Ding, Y. C., & Castanier, M. P. (2013) · Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles · doi:10.2516/ogst/2012075 · Cited by 114
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104041 · Cited by 113
Anqi, A. E. M., Li, C., Dhahad, H. A., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104906 · Cited by 113
RetractedMulti-U-Style micro-channel in liquid cooling plate for thermal management of power batteries
Qi, W., Peng, L., Yang, J., Chen, Y., Zhang, Y., Wang, G., Peng, F., & Hong, J. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123984 · Cited by 115
Baba, N., Yoshida, H., Nagaoka, M., Okuda, C., & Kawauchi, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.111 · Cited by 111
Chen, M., Bai, F., Song, W., Lv, J., Lin, S., Feng, Z., Li, Y., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.135 · Cited by 113
Deng, T., Ran, Y., Yin, Y., & Liu, P. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114394 · Cited by 111
“The typical Bernadi heat generation model is usually used to describe the heat generation rate as follows [32]:”
MethodWang, J., Yu, Y., Song, L., Yue, Y., Zeng, W., Mei, W., & Wang, Q. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118106 · Cited by 111
3-D CFD modeling and experimental testing of thermal behavior of a Li-Ion battery
Gümüşsu, E., Ekici, Ö., & Köksal, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.04.017 · Cited by 122
Pang, H., Guo, L., Wu, L., Jin, J., Zhang, F., & Liu, K. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102854 · Cited by 118
Advances in battery thermal management: Current landscape and future directions
Nasiri, M., & Hadim, H. A. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114611 · Cited by 124
Liu, J., Fan, Y., & Xie, Q. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118251 · Cited by 113
Senol, M., Bayram, I. S., Naderi, Y., & Galloway, S. (2023) · IEEE Access · doi:10.1109/access.2023.3268615 · Cited by 110
“tion [103], prediction of the temperature in the battery cell”
BackgroundModeling of thermal runaway propagation of NMC battery packs after fast charging operation
Wang, W., He, T., He, S., You, T., & Khan, F. I. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2021.08.006 · Cited by 108
Miao, Z., Li, Y., Xiao, X., Sun, Q., He, B., Chen, X., Liao, Y., Zhang, Y., Yuan, L., Yan, Z., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00007e · Cited by 111
Xu, X., & He, R. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.057 · Cited by 107
Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes
Shah, K., McKee, C., Chalise, D., & Jain, A. (2016) · Energy · doi:10.1016/j.energy.2016.07.076 · Cited by 122
He, P., Lu, H. F., Fan, Y., Ruan, H., Wang, C., & Zhu, Y. (2023) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2023.108200 · Cited by 108
He, L., Gu, Z., Zhang, Y., Jing, H., & Li, P. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c04243 · Cited by 117
Amiribavandpour, P., Shen, W., Mu, D., & Kapoor, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.022 · Cited by 105
Hybrid Energy Storage With Multimode Fuzzy Power Allocator for PV Systems
Feng, X., Gooi, H. B., & Chen, S. X. (2014) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2013.2290543 · Cited by 111
Thermal analysis and simulation of a Li-ion battery pack for a lightweight commercial EV
Cicconi, P., Landi, D., & Germani, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.008 · Cited by 114
Mesoscale modeling in electrochemical devices—A critical perspective
Ryan, E. M., & Mukherjee, P. P. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.11.002 · Cited by 111
Zhang, F., Liu, P., He, Y., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104678 · Cited by 107
Wang, S., Li, Y., Li, Y., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.159 · Cited by 106
Performance analysis of liquid cooling battery thermal management system in different cooling cases
Li, M., Ma, S., Jin, H., Wang, R., & Jiang, Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108651 · Cited by 108
Zhang, J., Huang, J. Z., Li, Z., et al. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-3672-z · Cited by 105
“The heat generation model of the second type is the simplified Bernardi heat generation model [11]:”
A Review of Advanced Cooling Strategies for Battery Thermal Management Systems in Electric Vehicles
Garud, K. S., Tai, L. D., Hwang, S.-G., Nguyen, N.-H., & Lee, M. (2023) · Symmetry · doi:10.3390/sym15071322 · Cited by 126
“The heat generation could be estimated using Bernardi’s equation as presented [33], In Equation (2), the irreversible heat comprises ohmic heat within battery cells and an over-potential charge transfer at the interface.”
MethodInvestigation on a hydrogel based passive thermal management system for lithium ion batteries
Zhang, S., Zhao, R. L., Liu, J., & Gu, J. (2014) · Energy · doi:10.1016/j.energy.2014.03.012 · Cited by 111
A novel thermal swelling model for a rechargeable lithium-ion battery cell
Oh, K., & Epureanu, B. I. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.085 · Cited by 112
Tang, Z., Wang, S., Liu, Z., & Cheng, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115509 · Cited by 105
Wang, Y., Yu, Y., Jing, Z., Wang, C., Zhou, G., & Zhao, W. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120827 · Cited by 108
An intelligent thermal management system for optimized lithium-ion battery pack
Zhuang, W., Liu, Z., Su, H., & Chen, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116767 · Cited by 105
Battery thermal management system with heat pipe considering battery aging effect
Guo, Z., Xu, Q., Wang, Y., Zhao, T. S., & Ni, M. (2022) · Energy · doi:10.1016/j.energy.2022.126116 · Cited by 105
Pan, M., & Zhong, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.014 · Cited by 111
Influence of Cell-to-Cell Variations on the Inhomogeneity of Lithium-Ion Battery Modules
Rumpf, K., Rheinfeld, A., Schindler, M. W., Keil, J., Schua, T., & Jossen, A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111811jes · Cited by 112
Xiao, Y., Yang, F., Gao, Z., Liu, M., Wang, J., Kou, Z., Lin, Y., Li, Y., Gao, L., Chen, Y., et al. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107145 · Cited by 104
Modeling stresses in the separator of a pouch lithium-ion cell
Shi, D., Xiao, X., Huang, X., & Kia, H. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.026 · Cited by 106
Cai, L., & White, R. E. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3486082 · Cited by 104
Guo, R., Lü, L., Sun, Z., & Xue, X. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120502 · Cited by 104
Wang, Y., Wang, Y., He, T., et al. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.121273 · Cited by 101
Heat generation in high power prismatic Li-ion battery cell with LiMnNiCoO2cathode material
Abdul-Quadir, Y., Laurila, T. T., Karppinen, J., Jalkanen, K., Vuorilehto, K., Skogström, L., & Paulasto‐Kröckel, M. (2014) · International Journal of Energy Research · doi:10.1002/er.3156 · Cited by 110
“The most common equation describing heat generation in a battery cell during an electrochemical process (charge or discharge) is given by [4,19]:”
BackgroundShang, S., Xie, Y., Li, M., Yuan, Y., Yu, J., Wu, H., Liu, B., & Liu, N. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.069 · Cited by 102
Adaptive thermal modeling of Li-ion batteries
Rad, M. S., Danilov, D. L., Baghalha, M., Kazemeini, M., & Notten, P. H. L. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.167 · Cited by 108
Mohammadian, S. K., & Zhang, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.121 · Cited by 98
Vashisht, S., Rakshit, D., Panchal, S., Fowler, M. W., & Fraser, R. A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107797 · Cited by 97
Recent Progress and Prospects in Liquid Cooling Thermal Management System for Lithium-Ion Batteries
Liu, J., Chen, H., Huang, S., Jiao, Y., & Chen, M. (2023) · Batteries · doi:10.3390/batteries9080400 · Cited by 123
In-situ characterization approach for heat-generating performances of a pouch lithium-ion battery
Sheng, L., Zhang, C., Xu, J., Zhang, X., Zhang, X., & Zhang, Z. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124081 · Cited by 108
Thermal Modeling of Large Format Lithium-Ion Cells
Nieto, N., Díaz, L., Gastelurrutia, J., Álava, I., Blanco, F., Ramos, J. C., & Rivas, A. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.042302jes · Cited by 108
Vita, A. D., Maheshwari, A., Destro, M., Santarelli, M., & Carello, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.184 · Cited by 106
Hu, X., Zheng, Y., Lin, X., & Xie, Y. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2977092 · Cited by 103
“Bernardi [36], and the simplified heat generation model by Thomas and Newman [37] is shown as follows:”
MethodModeling and Analysis of Heat Dissipation for Liquid Cooling Lithium-Ion Batteries
Duan, J., Zhao, J., Li, X., et al. (2021) · Energies · doi:10.3390/en14144187 · Cited by 97
Zeng, W., Niu, Y. F., Li, S., Hu, S., Mao, B., & Zhang, Y. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119171 · Cited by 96
Parameterization and Validation of an Integrated Electro-Thermal Cylindrical LFP Battery Model
Perez, H. E., Siegel, J. B., Lin, X., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2012) · Volume 3: Renewable Energy Systems; Robotics; Robust Control; Single Track Vehicle Dynamics and Control; Stochastic Models, Control and Algorithms in Robotics; Structure Dynamics and Smart Structures; · doi:10.1115/dscc2012-movic2012-8782 · Cited by 97
“The heat generation Q in the battery cell is defined by the polarization heat from joule heating and energy dissipated in the electrode over-potentials [19].”
BackgroundManikandan, B., Ramar, V., Yap, C., Lu, L., Tay, A. A. O., & Balaya, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.045 · Cited by 100
Bernagozzi, M., Georgoulas, A. N., Miché, N., Rouaud, C., & Marengo, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117061 · Cited by 100
Liu, Z., Wang, B., Tan, Y., & Li, P. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121214 · Cited by 99
Optimal Scheduling to Manage an Electric Bus Fleet Overnight Charging
Houbbadi, A., Trigui, R., Pélissier, S., Redondo-Iglesias, E., & Bouton, T. (2019) · Energies · doi:10.3390/en12142727 · Cited by 100
“According to [36], heat generated by battery during its working process could be divided into three parts: the reversible entropic heat Qr, side reaction heat Qs, and Joule heat Q j.”
BackgroundLiu, W., Jia, Z., Luo, Y., Xie, W., & Deng, T. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114272 · Cited by 98
Wang, B., Ji, C., Wang, S., Sun, J., Pan, S., Wang, D., & Liang, C. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114831 · Cited by 96
Huang, Y., Tang, Y. Z., Yuan, W., Fang, G., Yang, Y., Zhang, X., Wu, Y., Yuan, Y., Wang, C., & Li, J. (2021) · Science China Technological Sciences · doi:10.1007/s11431-020-1714-1 · Cited by 96
Li, Y., 白敏丽, Zhou, Z., Wu, W.-T., Lv, J., Gao, L., Huang, H., Li, Y., Li, Y., & Song, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120287 · Cited by 110
Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells
Huang, Y., Lu, Y., Huang, R. N., Chen, J., Chen, F., Liu, Z., Yu, X., & Roskilly, A. P. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.321 · Cited by 96
Modeling and Estimation for Advanced Battery Management
Lin, X., Kim, Y., Mohan, S. N., Siegel, J. B., & Stefanopoulou, A. G. (2019) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-053018-023643 · Cited by 112
Cao, J., Ling, Z., Shao, L., He, Y., Fang, X., & Zhang, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133536 · Cited by 99
Xie, J., Liu, X., Zhang, G., et al. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107877 · Cited by 94
Zeng, W., Ma, C., Hu, S., Li, S., & Zhang, Y. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117378 · Cited by 90
Shan, T., Zhang, P., Wang, Z., & Zhu, X. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111532 · Cited by 100
First-principles thermal modeling of electric double layer capacitors under constant-current cycling
d’Entremont, A., & Pilon, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.024 · Cited by 94
Metadata
- Authors
- Bernardi, D., Pawlikowski, E., & Newman, J.
- Affiliations
- University of California, Berkeley (US)
- ORCID
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1985-01-01
- Volume
- 132
- Issue
- 1
- Pages
- 5-12
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2023385933
- Cited by
- 2,548
- References
- 0
- Citations by year
- 2026: 383 · 2025: 387 · 2024: 339 · 2023: 265 · 2022: 238 · 2021: 167 · 2020: 147 · 2019: 106 · 2018: 74 · 2017: 89 · 2016: 42 · 2015: 53 · 2014: 75 · 2013: 51 · 2012: 31
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- iopscience.iop.org/page/copyright (vor, 12758 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 12758 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Keywords
- heat generation rate, Joule heating, phase transitions, mixing effects, electrochemical reactions, battery thermal management, battery modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.