Digital twin for integration of design-manufacturing-maintenance: an overview
Open accessAbstract
Abstract Traditional design, manufacturing and maintenance are run and managed independently under their own rules and regulations in an increasingly time-and-cost ineffective manner. A unified platform for efficient and intelligent design-manufacturing-maintenance of mechanical equipment and systems is highly needed in this rapidly digitized world. In this work, the definition of digital twin and its research progress and associated challenges in the design, manufacturing and maintenance of engineering components and equipment were thoroughly reviewed. It is indicated that digital twin concept and associated technology provide a feasible solution for the integration of design-manufacturing-maintenance as it has behaved in the entire lifecycle of products. For this aim, a framework for information-physical combination, in which a more accurate design, a defect-free manufacturing, a more intelligent maintenance, and a more advanced sensing technology, is prospected.
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
DTs enable businesses to quickly identify and resolve physical issues, optimize product design, and enhance development processes.
“By providing engineers with feedback from virtual environments, DTs enable businesses to quickly identify and resolve physical issues, optimize product design, and enhance development processes [7].”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [7]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Cites
1 retracted
[Retracted] Digital Twin‐Based Ecogreen Building Design
Liu, Y., Sun, Y., Yang, A., & Gao, J. P. (2021) · Complexity · doi:10.1155/2021/1391184 · Cited by 29 · see citing works
RetractedProceedings of the National Academy of Sciences of the United States of America
Dowling, J. E., & Wald, G. (2009) · Nutrition Reviews · doi:10.1111/j.1753-4887.1981.tb06752.x · Cited by 17,937 · see citing works
Journal of Physics: Conference Series
Jui, J. J., Mohd Helmi, S., Mohd Riduwan, G., Mohd Ashraf, A., & Mohd Zaidi, M. T. (2013) · Journal of Physics Conference Series · doi:10.1088/issn.1742-6596 · Cited by 15,799 · see citing works
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 4,391 · see citing works
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · see citing works
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920 · see citing works
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference<BR>20th AIAA/ASME/AHS Adaptive Structures Conference<BR>14th AIAA · doi:10.2514/6.2012-1818 · Cited by 2,404 · cited 3× · see citing works
“Glaessgen et al. [34] raised digital twin as an integrated multi-physical, multi-scale, high-fidelity twin system through physical models, sensor upgrades, and historical data, as shown in Figure 3.”
BackgroundIdris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357 · see citing works
Data-driven smart manufacturing
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.006 · Cited by 1,934 · see citing works
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,589 · see citing works
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397 · see citing works
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305 · see citing works
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · see citing works
Digital twin-driven product design framework
Tao, F., Sui, F.-Y., Liu, A., Qi, Q., Zhang, M., Song, B.-Y., Guo, Z.-R., Lu, S. C. Y., & Nee, A. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,085 · see citing works
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000 · see citing works
The Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994 · see citing works
Computer Integrated Manufacturing Systems
Sdol, E. (2009) · Cited by 931 · see citing works
Customer experience challenges: Bringing together digital, physical and social realms
Bolton, R. N., McColl-Kennedy, J. R., Cheung, L., Gallan, A., Orsingher, C., Witell, L., & Zaki, M. (2018) · Journal of Service Management · doi:10.1108/josm-04-2018-0113 · Cited by 849 · see citing works
Digital Twins: The Convergence of Multimedia Technologies
El Saddik, A. (2018) · IEEE MultiMedia · doi:10.1109/mmul.2018.023121167 · Cited by 817 · see citing works
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 801 · see citing works
C2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741 · see citing works
Introducing digital twins to agriculture
Pylianidis, C., Osinga, S., & Athanasiadis, I. N. (2021) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2020.105942 · Cited by 720 · see citing works
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2020) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 642 · see citing works
Smart manufacturing must embrace big data
Kusiak, A. (2017) · Nature · doi:10.1038/544023a · Cited by 636 · see citing works
Digital twins in smart farming
Verdouw, C., Tekinerdoğan, B., Beulens, A., & Wolfert, S. (2021) · Agricultural Systems · doi:10.1016/j.agsy.2020.103046 · Cited by 634 · see citing works
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Li, Z., Venkatesh, V. C., Luo, Y. H., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 575 · see citing works
Big Data for Modern Industry: Challenges and Trends [Point of View]
Yin, S., & Kaynak, O. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2388958 · Cited by 566 · see citing works
Toward a Digital Twin for real-time geometry assurance in individualized production
Söderberg, R., Wärmefjord, K., Carlson, J. S., & Lindkvist, L. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.038 · Cited by 543 · see citing works
Digital Twins: From Personalised Medicine to Precision Public Health
Kamel Boulos, M. N., & Zhang, P. (2021) · Journal of Personalized Medicine · doi:10.3390/jpm11080745 · Cited by 530 · see citing works
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 517 · see citing works
Zhang, Y., Ren, S., Liu, Y., & Si, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.123 · Cited by 514 · see citing works
Digital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange
Schroeder, G. N., Steinmetz, C., Pereira, C. E., & Espíndola, D. B. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.11.115 · Cited by 495 · see citing works
Sustainable Computing: Informatics and Systems
Li, K. (2012) · Cited by 485 · see citing works
Big Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 482 · see citing works
Machine Learning based Digital Twin Framework for Production Optimization in Petrochemical Industry
Min, Q., Lu, Y., Liu, Z., Su, C., & Wang, B. (2019) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2019.05.020 · Cited by 436 · see citing works
New IT Driven Service-Oriented Smart Manufacturing: Framework and Characteristics
Tao, F., & Qi, Q. (2017) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2017.2723764 · Cited by 434 · see citing works
The Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems ☆
Uhlemann, T., Schock, C., Lehmann, C., Freiberger, S., & Steinhilper, R. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.043 · Cited by 426 · see citing works
Building blocks for a digital twin of additive manufacturing
Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T. A., De, A., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.039 · Cited by 414 · see citing works
Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system
Liu, Q., Zhang, H., Leng, J., & Chen, X. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1471243 · Cited by 370 · see citing works
The impact of big data on world-class sustainable manufacturing
Dubey, R., Gunasekaran, A., Childe, S. J., Wamba, S. F., & Παπαδόπουλος, Θ. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7674-1 · Cited by 366 · see citing works
Digital twin for CNC machine tool: modeling and using strategy
Luo, W., Hu, T., Zhang, C., & Wei, Y. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0946-5 · Cited by 350 · see citing works
The digital twin of an industrial production line within the industry 4.0 concept
Vachalek, J., Bartalsky, L., Rovny, O., Sismisova, D., Morhac, M., & Loksik, M. (2017) · 2017 21st International Conference on Process Control (PC) · doi:10.1109/pc.2017.7976223 · Cited by 339 · see citing works
O’Donovan, P., Leahy, K., Bruton, K., & O’Sullivan, D. T. J. (2015) · Journal Of Big Data · doi:10.1186/s40537-015-0034-z · Cited by 313 · see citing works
Schluse, M., & Rossmann, J. (2016) · 2016 IEEE International Symposium on Systems Engineering (ISSE) · doi:10.1109/syseng.2016.7753162 · Cited by 292 · see citing works
Cai, Y., Starly, B., Cohen, P., & Lee, Y.-S. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.094 · Cited by 289 · see citing works
Digital-Twin-Based Job Shop Scheduling Toward Smart Manufacturing
Fang, Y., Peng, C., Lou, P., Zhou, Z., Hu, J., & Yan, J. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2938572 · Cited by 276 · see citing works
Building digital twins of 3D printing machines
DebRoy, T., Zhang, W., Turner, J., & Babu, S. S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.005 · Cited by 259 · cited 1× · see citing works
“Digital twin as a new technology has been applied in various fields, such as aerospace [46–50], industry manufacturing [51–53], 3D printing [54, 55], medical services [56–59], bio-manufacturing [60], agricultural machine [61], robots [62–64], power industry [65, 66], smart city [67], pressure…”
The Airframe Digital Twin: Some Challenges to Realization
Tuegel, E. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference<BR>20th AIAA/ASME/AHS Adaptive Structures Conference<BR>14th AIAA · doi:10.2514/6.2012-1812 · Cited by 255 · cited 1× · see citing works
“Digital twin has gained widespread attention in the aero-space field [76, 77, 120].”
BackgroundZhang, X., Gong, J., & Xuan, F. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2021.106236 · Cited by 248 · see citing works
Self-citationDigital Twins in Livestock Farming
Neethirajan, S. R., & Kemp, B. (2021) · Animals · doi:10.3390/ani11041008 · Cited by 226 · see citing works
Nikolakis, N., Alexopoulos, K., Xanthakis, E., & Chryssolouris, G. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1529430 · Cited by 225 · see citing works
Modeling of Cloud-Based Digital Twins for Smart Manufacturing with MT Connect
Hu, L., Nguyen, N.-T., Tao, W., Leu, M. C., Liu, X. F., Shahriar, M. R., & Al Sunny, S. M. N. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.155 · Cited by 219 · see citing works
Exploring the role of digital twin for asset lifecycle management
Macchi, M., Roda, I., Negri, E., & Fumagalli, L. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.415 · Cited by 216 · see citing works
MES-integrated digital twin frameworks
Negri, E., Berardi, S., Fumagalli, L., & Macchi, M. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.05.007 · Cited by 213 · see citing works
Modular based flexible digital twin for factory design
Guo, J., Zhao, N., Sun, L., & Zhang, S. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0953-6 · Cited by 205 · see citing works
Zhuang, C., Miao, T., Liu, J., & Xiong, H. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102075 · Cited by 202 · see citing works
Hu, Z., Tian, P.-L., Li, S.-W., & Zhang, J. (2017) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.08.007 · Cited by 201 · see citing works
Digital twin–driven aero-engine intelligent predictive maintenance
Xiong, M., Wang, H., Fu, Q., & Xu, Y. M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06976-w · Cited by 196 · see citing works
A robot arm digital twin utilising reinforcement learning
Matulis, M., & Harvey, C. (2021) · Computers & Graphics · doi:10.1016/j.cag.2021.01.011 · Cited by 185 · see citing works
Eksploatacja i Niezawodnosc - Maintenance and Reliability
Lingaitis, L. P., Mjamlin, S., Baranovsky, D. М., Jastremskas, V., Myamlin, S. V., Мямлін, С. В., Барановський, Д. М., & Мямлин, С. В. (2022) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein · Cited by 182 · see citing works
Tao, F., Zuo, Y. N., Xu, L. D., Lv, L., & Li, Z. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306771 · Cited by 179 · see citing works
A knowledge-based Digital Shadow for machining industry in a Digital Twin perspective
Ladj, A., Wang, Z., Meski, O., Belkadi, F., Ritou, M., & Cunha, C. M. D. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.018 · Cited by 173 · see citing works
Digital Twin Hospital Buildings: An Exemplary Case Study through Continuous Lifecycle Integration
Peng, Y., Zhang, M., Yu, F.-Q., Xu, J., & Gao, S. (2020) · Advances in Civil Engineering · doi:10.1155/2020/8846667 · Cited by 172 · see citing works
Lv, Z., & Xie, S. (2021) · Digital Twin · doi:10.12688/digitaltwin.17524.1 · Cited by 172 · see citing works
Roads Infrastructure Digital Twin: A Step Toward Smarter Cities Realization
Marai, O. E., Taleb, T., & Song, J. (2020) · IEEE Network · doi:10.1109/mnet.011.2000398 · Cited by 167 · see citing works
Building a right digital twin with model engineering
Zhang, L., Zhou, L., & Horn, B. K. P. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.02.009 · Cited by 166 · see citing works
Digital Twin for Machining Tool Condition Prediction
Qiao, Q., Wang, J., Ye, L.-K., & Gao, R. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.049 · Cited by 157 · see citing works
Kraft, E. M. (2016) · 54th AIAA Aerospace Sciences Meeting · doi:10.2514/6.2016-0897 · Cited by 156 · see citing works
Vrabič, R., Erkoyuncu, J. A., Butala, P., & Roy, R. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.10.167 · Cited by 151 · see citing works
Automated manufacturing system discovery and digital twin generation
Lugaresi, G., & Matta, A. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.01.005 · Cited by 145 · see citing works
Cloud-integrated cyber-physical systems for complex industrial applications
Shu, Z., Wan, J., Zhang, D., & Li, D. (2016) · Mobile Networks and Applications · doi:10.1007/s11036-015-0664-6 · Cited by 144 · see citing works
On the Value of Monitoring Information for the Structural Integrity and Risk Management
Thöns, S. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12332 · Cited by 143 · see citing works
Predictive Manufacturing System - Trends of Next-Generation Production Systems
Lee, J., Lapira, E., Yang, S., & Kao, A. (2013) · IFAC Proceedings Volumes · doi:10.3182/20130522-3-br-4036.00107 · Cited by 140 · see citing works
Rao, X., Sheng, C., Guo, Z., & Yuan, C. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108385 · Cited by 138 · see citing works
Zheng, P., Lin, Y. C., Chen, C., & Xu, X. W. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1530475 · Cited by 134 · see citing works
Digital Twin Concepts with Uncertainty for Nuclear Power Applications
Kochunas, B. M., & Huan, X. (2021) · Energies · doi:10.3390/en14144235 · Cited by 133 · see citing works
On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin
Cerrone, A., Hochhalter, J. D., Heber, G., & Ingraffea, A. R. (2014) · International Journal of Aerospace Engineering · doi:10.1155/2014/439278 · Cited by 130 · see citing works
Digital twin-driven cyber-physical production system towards smart shop-floor
Zhang, H., Zhang, G., & Yan, Q. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-1125-4 · Cited by 126 · see citing works
Wang, J., Wang, D., Wang, S., Li, W., & Song, K. (2021) · IEEE Access · doi:10.1109/access.2021.3056767 · Cited by 125 · see citing works
Cloud Manufacturing: Security, Privacy, and Forensic Concerns
Esposito, C., Castiglione, A., Martini, B., & Choo, K. R. (2016) · IEEE Cloud Computing · doi:10.1109/mcc.2016.79 · Cited by 122 · see citing works
Consistency check to synchronize the Digital Twin of manufacturing automation based on anchor points
Talkhestani, B. A., Jazdi, N., Schloegl, W., & Weyrich, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.166 · Cited by 119 · see citing works
Generating Digital Twin Models using Knowledge Graphs for Industrial Production Lines
Banerjee, A., Dalal, R., Mittal, S., & Joshi, K. P. (2017) · Proceedings of the 2017 ACM on Web Science Conference · doi:10.1145/3091478.3162383 · Cited by 117 · see citing works
Digital Twin for Automatic Transportation in Industry 4.0
Martínez-Gutiérrez, A., Díez-González, J., Ferrero-Guillén, R., Verde, P., Álvarez, R., & Pérez, H. (2021) · Sensors · doi:10.3390/s21103344 · Cited by 117 · see citing works
Automatic Generation of a Simulation-Based Digital Twin of an Industrial Process Plant
Martínez, G. S., Sierla, S., Karhela, T. A., & Vyatkin, V. V. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591464 · Cited by 115 · see citing works
A Human-Cyber-Physical System toward Intelligent Wind Turbine Operation and Maintenance
Chen, X. D., Eder, M., Shihavuddin, A., & Zheng, D. (2021) · Sustainability · doi:10.3390/su13020561 · Cited by 115 · see citing works
Digital‐twin assisted: Fault diagnosis using deep transfer learning for machining tool condition
Deebak, B. D., & Al-Turjman, F. M. (2021) · International Journal of Intelligent Systems · doi:10.1002/int.22493 · Cited by 108 · see citing works
Digital Twin for Operation of Microgrid: Optimal Scheduling in Virtual Space of Digital Twin
Park, H.-A., Byeon, G., Son, W., Jo, H.-C., Kim, J.-Y., & Kim, S. (2020) · Energies · doi:10.3390/en13205504 · Cited by 104 · see citing works
Data analytics using simulation for smart manufacturing
Shao, G., Shin, S., & Jain, S. (2014) · Winter Simulation Conference · doi:10.1109/wsc.2014.7020063 · Cited by 99 · see citing works
A modular computational framework for medical digital twins
Masison, J., Beezley, J., Mei, Y., Ribeiro, H., Knapp, A. C., Sordo Vieira, L., Adhikari, B., Scindia, Y., Grauer, M., Helba, B., et al. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2024287118 · Cited by 98 · see citing works
Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin
Lohtander, M., Ahonen, N., Lanz, M., Ratava, J., & Kaakkunen, J. J. J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.06.057 · Cited by 90 · see citing works
FMU-supported simulation for CPS Digital Twin
Negri, E., Fumagalli, L., Cimino, C., & Macchi, M. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.12.033 · Cited by 89 · see citing works
Rabah, S., Assila, A., Khouri, E., Maier, F., Ababsa, F., bourny, V., Maier, P., & Mérienne, F. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.10.070 · Cited by 86 · see citing works
(2022) · Advances in Civil Engineering · doi:10.1155/7074 · Cited by 86 · see citing works
Hayes, R., Keane, L. M., Tung, F., & Wedan, R. W. (1968) · NASA Technical Reports Server (NASA) · Cited by 82 · see citing works
A web-based manufacturing service system for rapid product development
Lan, H., Ding, Y., Hong, J., Huang, H., & Lu, B. (2003) · Computers in Industry · doi:10.1016/j.compind.2003.07.006 · Cited by 81 · see citing works
Kong, Y., Qin, Z., Wang, T., Han, Q., & Chu, F. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.04.019 · Cited by 80 · see citing works
Multisource Model-Driven Digital Twin System of Robotic Assembly
Li, X., He, B., Zhou, Y., & Li, G. (2020) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2958874 · Cited by 78 · see citing works
Journal of Personalized Medicine
(2013) · Journal of Personalized Medicine · doi:10.3390/jpm · Cited by 76 · see citing works
Peng, B., Xia, H., Lv, X., Annor-Nyarko, M., Zhu, S., Liu, Y.-K., & Zhang, J. (2021) · Applied Intelligence · doi:10.1007/s10489-021-02555-4 · Cited by 75 · see citing works
Wang, X.-M., Tian, F., Fan, L., Xie, C., Niu, Z., & Chen, W. (2019) · BMC Medical Genomics · doi:10.1186/s12920-018-0466-3 · Cited by 66 · see citing works
National Aeronautics and Space Administration
Latham, D. W. (2011) · Encyclopedia of Astrobiology · doi:10.1007/978-3-642-11274-4_1788 · Cited by 61 · see citing works
Product Lifecycle Management: Driving the Next Generation of Lean Thinking by Michael Grieves
Githens, G. (2007) · Journal of Product Innovation Management · doi:10.1111/j.1540-5885.2007.00250_2.x · Cited by 58 · see citing works
Application Status and Prospect of Digital Twin for On-Orbit Spacecraft
Yang, W., Zheng, Y., & Li, S. (2021) · IEEE Access · doi:10.1109/access.2021.3100683 · Cited by 58 · see citing works
Rabiei, M., & Modarres, M. (2012) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.11.020 · Cited by 55 · see citing works
Airframe digital twin technology adaptability assessment and technology demonstration
Liao, M., Renaud, G., & Bombardier, Y. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106793 · Cited by 55 · see citing works
Towards the Development of Digital Twins for the Bio-manufacturing Industry.
Gargalo, C. L., Heras, S. C. D. L., Jones, M., Udugama, I. A., Mansouri, S., Krühne, U., & Gernaey, K. (2020) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/10_2020_142 · Cited by 55 · see citing works
Applying digital manufacturing technology to ship production and the maritime environment
Kim, H., Lee, J., Park, J., Park, B., & Jang, D. (2002) · Integrated Manufacturing Systems · doi:10.1108/09576060210429748 · Cited by 53 · see citing works
A vision-based fusion method for defect detection of milling cutter spiral cutting edge
Zhang, T., Zhang, C., Wang, Y., Zou, X., & Hu, T. (2021) · Measurement · doi:10.1016/j.measurement.2021.109248 · Cited by 53 · see citing works
Value-Driven Robotic Digital Twins in Cyber–Physical Applications
Kaigom, E. G., & Rosmann, J. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3011062 · Cited by 51 · see citing works
Lightweight sustainable intelligent load forecasting platform for smart grid applications
Mukherjee, A., Mukherjee, P., Dey, N., De, D., & Panigrahi, B. K. (2019) · Sustainable Computing Informatics and Systems · doi:10.1016/j.suscom.2019.100356 · Cited by 49 · see citing works
A dynamic Bayesian network approach for digital twin
Li, C., Mahadevan, S., Ling, Y., Wang, L., & Choze, S. (2017) · AIAA Non-Deterministic Approaches Conference · doi:10.2514/6.2017-1566 · Cited by 48 · see citing works
Services and Key Technologies of the Internet of Things
Xing, X., Xiaojiang, Wang, Jianli, ., L., & Mingdong (2010) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 46 · see citing works
Remarks on Virtual World and Virtual Reality Experiments
Harrison, G. W., Haruvy, E. E., & Rutström, E. E. (2011) · Southern Economic Journal · doi:10.4284/0038-4038-78.1.87 · Cited by 45 · see citing works
Implementation strategy of physical entity for manufacturing system digital twin
Wei, Y., Hu, T., Wang, Y., Wei, S., & Luo, W. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102259 · Cited by 45 · see citing works
A standards-based approach for linking as-planned to as-fabricated product data
Helu, M., Joseph, A., & Thomas Hedberg, Jr. (2018) · Cirp Annals-manufacturing Technology · doi:10.1016/j.cirp.2018.04.039 · Cited by 44 · see citing works
Lin, P., Gu, J., & Yang, M. (2014) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2013.0124 · Cited by 43 · see citing works
Towards digital twins through object-oriented modelling: a machine tool case study
Scaglioni, B., & Ferretti, G. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.03.104 · Cited by 42 · see citing works
Implementation of Digital Twin for Engine Block Manufacturing Processes
Bambura, R., Šolc, M., Dado, M., & Kotek, L. (2020) · Applied Sciences · doi:10.3390/app10186578 · Cited by 42 · see citing works
Quality Deviation Control for Aircraft Using Digital Twin
Cai, H., Zhu, J., & Zhang, W. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4050376 · Cited by 42 · see citing works
Nonlinear ultrasonic modulation based failure warning for aluminum plates subject to fatigue loading
Kim, Y., Lim, H. J., & Sohn, H. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.05.014 · Cited by 41 · see citing works
Diveyev, A. I., & Sofronova, E. (2008) · IFAC Proceedings Volumes · doi:10.3182/20080706-5-kr-1001.01031 · Cited by 39 · see citing works
The Application of Digital Twin on Power Industry
Huang, J., Zhao, L., Wei, F., & Cao, B. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/647/1/012015 · Cited by 38 · see citing works
Big Data Challenges in Industrial Automation
Obitko, M., Jirkovský, V., & Bezdíček, J. (2013) · Lecture notes in computer science · doi:10.1007/978-3-642-40090-2_27 · Cited by 36 · see citing works
Application and research on digital twin in electronic cam servo motion control system
Xu, J., & Guo, T. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06553-7 · Cited by 34 · see citing works
Insights into Digital Twin Based on Finite Element Simulation of a Large Hydro Generator
Moussa, C., Al‐Haddad, K., Kedjar, B., & Merkhouf, A. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591653 · Cited by 33 · see citing works
Single-machine-based predictive maintenance model considering intelligent machinery prognostics
Liao, W., Wang, Y., & Pan, E. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3884-3 · Cited by 32 · see citing works
Data Flow and Communication Framework Supporting Digital Twin for Geometry Assurance
Bohlin, R., Hagmar, J., Bengtsson, K., Lindkvist, L., Carlson, J. S., & Söderberg, R. C. (2017) · doi:10.1115/imece2017-71405 · Cited by 32 · see citing works
Duer, S. (2020) · Energies · doi:10.3390/en13102437 · Cited by 29 · see citing works
Liu, Z., Jiang, A., Zhang, A., Xing, Z., & Du, X. (2021) · Advances in Civil Engineering · doi:10.1155/2021/6640198 · Cited by 27 · see citing works
Digital twin technology for “smart manufacturing”
David, P. E., & Anandhakumar (2019) · Advances in computers · doi:10.1016/bs.adcom.2019.10.009 · Cited by 25 · see citing works
Engineering Smarter Cities with Smart City Digital Twins
Taylor, J. E., Bennett, G., & Mohammadi, N. (2021) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000974 · Cited by 25 · see citing works
Micro Manufacturing Unit – Creating Digital Twin Objects with Common Engineering Software
Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J., & Kaakkunen, J. J. J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.10.071 · Cited by 24 · see citing works
Crack Size Identification for Bearings Using an Adaptive Digital Twin
Piltan, F., & Kim, J.-M. (2021) · Sensors · doi:10.3390/s21155009 · Cited by 24 · see citing works
An, M., Lin, W., & Huang, S. T. (2013) · The Open Transportation Journal · doi:10.2174/1874447801307010027 · Cited by 22 · see citing works
Digital Twin for 3D Printing on CNC Machines
Kabaldin, Y. G., Владимирович, К. П., Шатагин, Д. А., Anosov, M. S., & Chursin, A. A. (2019) · Russian Engineering Research · doi:10.3103/s1068798x19100101 · Cited by 20 · see citing works
Digital twin–based stamping system for incremental bending
Zhou, C., Zhang, F., Wei, B., Lin, Y., He, K., & Du, R. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07422-7 · Cited by 20 · see citing works
Industry 4.0 - Digital Twin Applied to Direct Digital Manufacturing
Vitorino, J., Ribeiro, E., Silva, R., Santos, C., Carreira, P., Mitchell, G. R., & Mateus, A. (2019) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.890.54 · Cited by 17 · see citing works
Digital Twin: Intersection of Mind and MachinePreprint
Soni, R. K., Tanmay, D., Twinkle, T., & Bhatia, M. (2019) · SSRN Electronic Journal · Cited by 17 · see citing works
A modular structure data modeling method for generalized products
Li, H., Ji, Y., Luo, G., & Mi, S. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7815-6 · Cited by 16 · see citing works
An intelligent maintenance model to assess the condition-based maintenance of circuit breakers
Lin, P., Gu, J., & Yang, M. (2014) · International Transactions on Electrical Energy Systems · doi:10.1002/etep.1967 · Cited by 16 · see citing works
Monitoring 4.0 of penstocks: digital twin for fatigue assessment
Dreyer, M., Nicolet, C., Gaspoz, A., Gonçalves, N., Rey-Mermet, S., & Boulicaut, B. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/774/1/012009 · Cited by 16 · see citing works
Model of Intelligent Maintenance Systems
Gregor, M., Haluska, M., Fusko, M., & Grznár, P. (2016) · Annals of DAAAM for ... & proceedings of the ... International DAAAM Symposium · doi:10.2507/26th.daaam.proceedings.154 · Cited by 15 · see citing works
Aydogan, H., & Aras, F. (2019) · International Journal of Electrical Engineering Education · doi:10.1177/0020720919856249 · Cited by 15 · see citing works
Development of digital twin for composite pressure vessel
Burov, A. E., & Burova, O. G. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1441/1/012133 · Cited by 14 · see citing works
CNC Machine Tools and Digital Twins
Kabaldin, Y. G., Шатагин, Д. А., Anosov, M. S., Владимирович, К. П., & Михайловна, К. А. (2019) · Russian Engineering Research · doi:10.3103/s1068798x19080070 · Cited by 13 · see citing works
Digital twins of mechatronic machine tools for modern manufacturing
Kutin, A. A., Bushuev, V. V., & Molodtsov, V. V. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/568/1/012070 · Cited by 10 · see citing works
Digital Twins of Processes of Thermomechanical Treatment of Steel
Rudskoy, A. I., & Колбасников, Н. Г. (2020) · Metal Science and Heat Treatment · doi:10.1007/s11041-020-00505-4 · Cited by 10 · see citing works
Big Data Based Intelligent Operation and Maintenance Platform
Zhang, G., Lin, J., Zhang, Y., Xue, K., Nan, J., & Li, B. (2020) · IEEE International Conference on Intelligent Transportation Engineering (ICITE) · doi:10.1109/icite50838.2020.9231488 · Cited by 9 · see citing works
A novel robot kinematic calibration method based on common perpendicular line model
Shen, C., Chen, Y., Chen, B., & Qiao, Y. (2018) · Industrial Robot the international journal of robotics research and application · doi:10.1108/ir-05-2018-0084 · Cited by 8 · see citing works
Galletti, A., & Papadimitriou, D.-C. (2013) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 7 · see citing works
Shuang, S., Xu, P.-D., Yang, Y., Lei, G., & Bu, Q. (2018) · International Conference on Power System Technology (POWERCON) · doi:10.1109/powercon.2018.8601934 · Cited by 7 · see citing works
Creating a digital twin of an agricultural machine
Nemtinov, K., Eruslanova, M. A., Zazulya, A., Nemtinova, Y., & Salih, H. S. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202032905002 · Cited by 7 · see citing works
Digital Twin of the Distributed Generation Plant
Bulatov, Y. N., Kryukov, A. V., & Korotkova, K. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/976/1/012024 · Cited by 7 · see citing works
Li, R., Shi, P., Li, M., Zhang, Y., Ding, N., & Wu, H. (2020) · E3S Web of Conferences · doi:10.1051/e3sconf/202019403001 · Cited by 7 · see citing works
An Intelligent Operation and Maintenance System for Power Consumption Based on Deep Learning
Huang, Z., Mao, W., Chen, M., Wu, Q., Xiong, B., & Xu, W. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/486/1/012107 · Cited by 6 · see citing works
Liu, H. L., Dong, J. C., Wang, T. Y., & Yu, Z. Q. (2016) · Key engineering materials · doi:10.4028/www.scientific.net/kem.693.1948 · Cited by 5 · see citing works
Tao, J., Ming, Z., Jiangping, W., Jinzhao, D., Zhihua, W., & Zhuoyan, J. (2020) · International Conference on Electronics Technology (ICET) · doi:10.1109/icet49382.2020.9119615 · Cited by 5 · see citing works
The Intelligent Ultrasonic System for Quality Testing of Weld Connections in Turbine Runners
Xiao, K., Shi, Y. K., Ma, Q. Z., Jun, Z., & Li, X. H. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.774-776.1543 · Cited by 4 · see citing works
Qu, C., Donglin, W., Wenxia, L., & Pengcheng, Z. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/533/1/012049 · Cited by 4 · see citing works
Numerical Model Updating for Bridge Maintenance Using Digital-Twin Model
Yoon, S.-G., Shin, S., & Shin, D. H. (2018) · Journal of KIBIM · doi:10.13161/kibim.2018.8.4.034 · Cited by 4 · see citing works
Optimierung des Managements der Tragwerksintegrität für Offshore‐Windenergieanlagen
Thöns, S., Faber, M. H., & Rücker, W. (2012) · Bautechnik · doi:10.1002/bate.201200021 · Cited by 3 · see citing works
Research on the Remote Monitoring and Fault Diagnosis of CNC System Based on Network
Lin, J. Z., Jiang, D. Y., Geng, B., & Zhang, Z. H. (2011) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.141.465 · Cited by 3 · see citing works
Zhou, Y., Liang, Y., & Li, R. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/677/3/032074 · Cited by 3 · see citing works
Research on Application of Intelligent Operation and Maintenance in Conventional Substations
Bin-bin, L., Qiong, X., & Chang-xiang, W. A. N. G. (2019) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec48194.2019.8975057 · Cited by 3 · see citing works
Wu, D., Li, P., Hubin, Z., Hong, M., & Lu, X. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/440/3/032043 · Cited by 3 · see citing works
Smart Operation and Maintenance Platform of Protection Relay Based on Mobile Sensing and Big Data
Liang, W., Ouyang, F., Wang, S., Zhu, W., & Gan, L. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/632/4/042021 · Cited by 3 · see citing works
Pu, Z., Wan, L., Wu, M. L., Qimiciren, & Wang, W. (2020) · IEEE International Conference on Automation, Electronics and Electrical Engineering (AUTEEE) · doi:10.1109/auteee50969.2020.9315699 · Cited by 3 · see citing works
New IT-driven Manufacturing Service Management：Research Status and Prospect
Cheng, Y., Qi, Q., & Tao, F. (2018) · Zhongguo jixie gongcheng · Cited by 3 · see citing works
Research Based on State Monitoring of CNC Machine Tools Intelligent Security System
Shi, R. B., Guo, Z. P., & Song, Z. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.427-429.1328 · Cited by 2 · see citing works
Remote Monitoring and Intelligent Fault Diagnosis Technology Research Based on Open CNC System
Lu, Z. L., Hu, S. G., Wang, T. Y., Chen, D. X., & Liu, Q. J. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.819.234 · Cited by 2 · see citing works
Intelligent Operation and Maintenance of Micro-grid Technology and System Development
Fu, M., Song, J., Zhao, J., & Du, J. (2018) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/108/5/052060 · Cited by 2 · see citing works
Intelligent Network Operation and Maintenance Based on Deep Learning Technology
Wang, X., Wang, L., Jia, Z., Xu, J., Wang, Y., Shi, D., Xue, Y., & Nie, Z. (2020) · Advances in intelligent systems and computing · doi:10.1007/978-981-15-8462-6_23 · Cited by 2 · see citing works
Research on Key Technologies of Intelligent Operation and Maintenance of Communication Network
Wang, L., Zhao, Y., & Chen, Z. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1856/1/012022 · Cited by 2 · see citing works
Chang, S. H., Kim, H. G., & Choi, S. S. (1997) · International Conference on Human-Computer Interaction · Cited by 1 · see citing works
Research and Development of Vehicle Intelligent Terminal System for Engineering Equipment
Tu, Q., Min, S. H., Yan, J., Qiliang, S., Wang, G., & Hai, W. (2011) · International Conference on Measuring Technology and Mechatronics Automation (ICMTMA) · doi:10.1109/icmtma.2011.539 · Cited by 1 · see citing works
Criteria of Diversity Evaluation for Intelligent Diagnosis of Nuclear Power Plants.
Washio, T., Sakuma, M., Furukawa, H., & Kitamura, M. (1995) · Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan · doi:10.3327/jaesj.37.1128 · Cited by 1 · see citing works
Application of Virtualization Technology in Internet Data Center of Universities
Li, L. (2012) · Research and Exploration in Laboratory · Cited by 1 · see citing works
An Immersive Nuclear Power Intelligent Control System Based on Virtual Reality
Mu, Z., Hu, Q., & Liu, M. (2017) · International Conference on Smart Grid and Electrical Automation (ICSGEA) · doi:10.1109/icsgea.2017.101 · Cited by 1 · see citing works
Zhenhua, L., & Xukan, X. (2019) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.13272/j.issn.1671-251x.17394 · Cited by 1 · see citing works
Flagged first, then by citations
2 of the 181 references couldn’t be matched to a known paper.
Research works printed but not linked: 18
- S Thons, M H Faber, W Rucker. Optimisation of the structural integrity management for offshore wind turbines. Bautechnik, 2012, 89(8): 525-532.
- B Ernst, K Rohrig, R Jursa. Online-monitoring and prediction of wind power in german transmission system operation centres. World Wind Energy Conference, Cape Town, South Africa, Nov. 23-26, 2003.
- T Y Ju, D U Yeom, W B Kim. Preventive maintenance feedback status and methodology review. Transactions of the Korean Nuclear Society Autumn Meeting, Yeosu, Korea, Oct. 25-26, 2018.
- S D Yu. Research on cloud computing in the key technologies of railway intelligent operation and maintenance sharing platform. Journal of Physics: Conference Series, 2021, 1800(1): 012010.
- A Huang, Y Shen, Y Tang. Operation and maintenance design of indus- trial equipment based on mixed reality technology. Ordnance Industry Automation, 2019, 38(9): 72-77.
- F Tao, W Liu, J Liu, et al. Digital twin and its potential application explo- ration. Computer Integrated Manufacturing Systems, 2018, 24(1): 1-18.
- X X Liu, L Tang, H B Zeng, et al. Smart design and simulation of aero- space control system based on digital twin. Journal of System Simula- tion, 2019, 31(3): 377. (in Chinese)
- J Wang, Y Xiang, Z He. Models and implementation of digital twin based spacecraft system engineering. Computer Integrated Manufacturing Systems, 2019, 25(6): 1348-1360.
- B Bjornsson, C Borrebaeck, N Elander, et al. Digital twins to personalize medicine. Genome Medicine, 2019, 12: 1.
- F Tao, M Zhang, Y Liu, et al. Digital twin driven prognostics and health management for complex equipment. Cirp Annals, 2018, 67(1): 169-172.
- X H Chen, H Zhao, G F Duan. Collaborative commerce mode of enter- prises intelligent e-maintenance system. 3rd International Conference on Electronic Commerce Engineering, Hangzhou, China, Oct. 24-27, 2003: 232-235.
- L Wang. Research on the docking technology of final installation for aeroengine low pressure turbine unit based on digital twin. Computer Measurement & Control, 2018, 26(10): 286-290. (in Chinese)
- Z Yuliang, W Zhangjiapeng. Digital twin technology for spacecraft on- orbit assembly. Navigationand Control, 2018, 17(3): 75-82. (in Chinese)
- C Zhuang, J Liu, H Xiong, et al. Connotation, architecture and trends of product digital twin. Computer Integrated Manufacturing Systems, 2017, 23(4): 753-768. (in Chinese)
- Q Xu, S Xia, B He. Operation and maintenance analysis on substation intelligent inspection robot system. Zhejiang Electric Power, 2014, 33(5): 30-32.
- B Guo, Y Shu, R Li, et al. Design and engineering application of intelli- gent operation and maintenance service system for distributed poverty alleviation photovoltaic. Electrical Measurement and Instrumentation, 2019, 56(7): 84-88.
- J Que. Construction and implementation of platform for intelligent mine. Industry and Mine Automation, 2018, 44(4): 90-93.
- H Li, H Wang, Y Cheng, et al. Technology and application of data-driven intelligent services for complex products. China Mechanical Engineering, 2020, 31(7): 757-772. (in Chinese)
Cited by
Sorted by citations
Digital twin: benefits, use cases, challenges, and opportunities
Attaran, M., & Celik, B. G. (2023) · Decision Analytics Journal · doi:10.1016/j.dajour.2023.100165 · Cited by 704 · see citing works
Wang, H., Li, B., Gong, J., & Xuan, F. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109242 · Cited by 289 · see citing works
Self-citationWang, S., Zhang, J., Wang, P., Law, J., Călinescu, R., & Mihaylova, L. S. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102608 · Cited by 181 · see citing works
Psarommatis, F., May, G., & Azamfirei, V. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.04.009 · Cited by 127 · see citing works
Sharma, R., & Gupta, H. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141118 · Cited by 105 · see citing works
Digital Twins in Agriculture and Forestry: A Review
Tagarakis, A., Benos, L., Kyriakarakos, G., Pearson, S., Sørensen, C. G., & Bochtis, D. (2024) · Italian National Conference on Sensors · doi:10.3390/s24103117 · Cited by 92 · see citing works
Digital Twin Approach for Operation and Maintenance of Transportation System—Systematic Review
Werbińska-Wojciechowska, S., Giel, R., & Winiarska, K. (2024) · Sensors · doi:10.3390/s24186069 · Cited by 109 · see citing works
Resilient manufacturing: A review of disruptions, assessment, and pathways
Leng, J., Xie, J., Li, R. C., Zhou, X., Gu, X., Liu, Q., Chen, X., Zhang, W., & Kusiak, A. (2025) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2025.02.006 · Cited by 63 · see citing works
Cui, Z., Yang, X., Yue, J., Liu, X., Tao, W., Xia, Q., & Wu, C. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.07.016 · Cited by 54 · see citing works
A review on digital twin application in photovoltaic energy systems: challenges and opportunities
Alao, K. T., Gilani, S. I. U.-H., Sopian, K., & Alao, T. O. (2024) · JMST Advances · doi:10.1007/s42791-024-00083-z · Cited by 56 · see citing works
Tai, J. L., Sultan, M. T. H., Łukaszewicz, A., Jóźwik, J., Oksiuta, Z., & Shahar, F. S. (2025) · Materials · doi:10.3390/ma18133146 · Cited by 49 · see citing works
Zhong, R., Hu, B., Feng, Y., Zheng, H. R., Hong, Z., Lou, S., & Tan, J. (2023) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-023-00951-0 · Cited by 41 · see citing works
Digital Twins Enabling Intelligent Manufacturing: From Methodology to Application
Hu, S., Li, C., Li, B., Yang, M., Wang, X., Gao, T., Xu, W., Dambatta, Y. S., Zhou, Z., & Xu, P. (2024) · Intelligent and sustainable manufacturing · doi:10.35534/ism.2024.10007 · Cited by 42 · see citing works
Digital twins: A scientometric investigation into current progress and future directions
Kaur, H., & Bhatia, M. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.125917 · Cited by 33 · see citing works
State-of-the-art review of resilient smart cities: Progress and challenges
Umeike, R., Dao, T., & Crawford, S. (2025) · Urban Governance · doi:10.1016/j.ugj.2025.05.007 · Cited by 36 · see citing works
Industrial applications of digital twins: A systematic investigation based on bibliometric analysis
Ren, J., Ahmad, R., Li, D., Ma, Y., & Hui, J. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103264 · Cited by 32 · see citing works
Digital twins' readiness and its impacts on supply chain transparency and sustainable performance
Patil, A., Srivastava, S., Paul, S. K., & Dwivedi, A. (2024) · Industrial Management & Data Systems · doi:10.1108/imds-10-2023-0767 · Cited by 34 · see citing works
Towards Digital Twin Modeling and Applications for Permanent Magnet Synchronous Motors
Lukman, G. F., & Lee, C. (2025) · Energies · doi:10.3390/en18040956 · Cited by 29 · see citing works
Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0
Mon, B. F., Hayajneh, M., Ali, N. A., Ullah, F., Ullah, H., & Alkobaisi, S. (2025) · Computers, Materials & Continua · doi:10.32604/cmc.2025.061411 · Cited by 26 · see citing works
“By providing engineers with feedback from virtual environments, DTs enable businesses to quickly identify and resolve physical issues, optimize product design, and enhance development processes [7].”
Jia, J., Wang, X., Xu, Y., Song, Z., Zhang, Z., Wu, J., & Liu, Z. (2024) · Process Safety Progress · doi:10.1002/prs.12575 · Cited by 21 · see citing works
Eumi, E. M. (2024) · Decision Analytics Journal · doi:10.1016/j.dajour.2024.100502 · Cited by 17 · see citing works
Luo, Q., Deng, Q., Zhuang, H., Gong, G., Fan, Q., & Liu, X. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102707 · Cited by 18 · see citing works
Feng, C., Xu, L., Zhao, L. J., Han, Y., & Hao, K. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202201430 · Cited by 17 · see citing works
Cieply, J., Disselkamp, J., Dyck, F., Alturk, W., Kühn, A., & Dumitrescu, P. D.-I. R. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.02.168 · Cited by 18 · see citing works
A Survey of Digital Twin for Industry 4.0: Benefits, Challenges and Opportunities
Murgod, T. R., Sundaram, S. M., Mahanthesha, U., & Murugesan, P. (2023) · SN Computer Science · doi:10.1007/s42979-023-02363-2 · Cited by 13 · see citing works
Digital-Triplet: a new three entities digital-twin paradigm for equipment fault diagnosis
Zhang, H., Wang, Z., Zhang, S., Qiu, L., Wang, Y., Xiang, F., Pan, Z., Zhu, L., & Tan, J. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02471-7 · Cited by 13 · see citing works
Multiscale Modeling and Computer-Aided Design of Advanced Materials with Hierarchical Structure
Shilko, E. V., Dmitriev, A. I., Ревович, Б. Р., & ROMANOVA, V. A. (2024) · Physical Mesomechanics · doi:10.1134/s1029959924050011 · Cited by 13 · see citing works
Tai, J. L., Sultan, M. T. H., Łukaszewicz, A., Jóźwik, J., Oksiuta, Z., & Shahar, F. S. (2025) · Materials · doi:10.3390/ma18112466 · Cited by 12 · see citing works
Digital twin for product design collaboration: a systematic literature review
da Trindade, E. S., da Costa, C. A., & Souza, V. C. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15042-8 · Cited by 12 · see citing works
Modeling of a Digital Twin for Magnetic Bearings
Taha, O. W., & Hu, Y. (2023) · Applied Sciences · doi:10.3390/app13148534 · Cited by 10 · see citing works
Vetrivel, S. C., Sowmiya, K. C., & Sabareeshwari, V. (2024) · Advances in business information systems and analytics book series · doi:10.4018/979-8-3693-3234-4.ch009 · Cited by 11 · see citing works
Digital twin-driven design for elevator fairings via multi-objective optimization
Xie, J., Chen, L., Xu, S., Qin, C., Zhang, Z., & Liu, C. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13049-1 · Cited by 10 · see citing works
Scientometric Analysis of Digital Twin in Industry 4.0
Kaur, H., & Bhatia, M. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3459965 · Cited by 17 · see citing works
Gauging the Technology Acceptance of Manufacturing Employees: A New Measure for Pre-Implementation
Haynes, K., Harris, G. A., Schall, M. C., Liu, J., & Davis, J. (2024) · Sustainability · doi:10.3390/su16124969 · Cited by 8 · see citing works
Mei, Z., Wang, X., Xie, J., Li, S., & Liu, J. (2024) · Measurement · doi:10.1016/j.measurement.2024.116145 · Cited by 8 · see citing works
Metaverse and B2B marketing: untapped research opportunities
Bakeshloo, K. A., Agnihotri, R., & Mohammadzadeh, M. (2025) · Journal of Business Research · doi:10.1016/j.jbusres.2025.115592 · Cited by 10 · see citing works
Digital twins as decision infrastructure: evolution, architecture, and research roadmap
Yang, C. P., Malarvizhi, A. S., Masri, Y., Smith, J. S., Li, Z., Huang, Q., Liu, L., & Kim, J. (2026) · Big Earth Data · doi:10.1080/20964471.2026.2678046 · Cited by 10 · see citing works
Alguirat, I., Zouari, A., & Lehyani, F. (2024) · International Colloquium on Logistics and Supply Chain Management (LOGISTIQUA) · doi:10.1109/logistiqua61063.2024.10571453 · Cited by 7 · see citing works
DIGITAL TWINS AND ENTERPRISE ARCHITECTURE: A FRAMEWORK FOR REAL-TIME MANUFACTURING DECISION SUPPORT
Mahankali, R. (2025) · INTERNATIONAL JOURNAL OF COMPUTER ENGINEERING & TECHNOLOGY · doi:10.34218/ijcet_16_01_049 · Cited by 6 · see citing works
DIGITAL TWIN APPLICATION IN CONSTRUCTION COST MANAGEMENT
Che Haron, R., & Muhd Zafir, N. B. (2025) · PLANNING MALAYSIA · doi:10.21837/pm.v23i35.1665 · Cited by 6 · see citing works
Abadi, M., Abadi, C., Abadi, A., & Ben-Azza, H. (2022) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2022.0130811 · Cited by 7 · see citing works
Revolutionizing Agriculture Through Digital Twins
Attaran, M., Attaran, S., & Çelik, B. G. (2023) · Advances in information quality and management · doi:10.4018/978-1-6684-7366-5.ch053 · Cited by 5 · see citing works
Adjusting products with compensatory elements using a digital twin: Model and methodology
Konecny, J., Bailová, M., Beremlijski, P., Prauzek, M., & Martínek, R. (2023) · PLoS ONE · doi:10.1371/journal.pone.0279988 · Cited by 5 · see citing works
Zhang, Z., Wu, M., & Yin, J. (2024) · Sustainability · doi:10.3390/su16093837 · Cited by 6 · see citing works
Scientometric Insights of Digital Twins in Industry 4.0Preprint
Kaur, H., & Bhatia, M. (2024) · Research Square · doi:10.21203/rs.3.rs-4380510/v1 · Cited by 5 · see citing works
Venkateswarlu, L., Mohan, C. R., Reddy, P. K., Bande, V., Archana, M., & Manellore, P. K. R. (2025) · International Conference on Smart Electronics and Communication (ICOSEC) · doi:10.1109/icosec67334.2025.11459737 · Cited by 5 · see citing works
Digital Twin in Fluid Power: Reviewing Constituents
Khamkar, A. D., & Patil, S. M. (2024) · International Research Journal of Multidisciplinary Scope · doi:10.47857/irjms.2024.v05i01.0365 · Cited by 4 · see citing works
Reduced-order modeling of digital twins for a high-voltage circuit breaker
Wang, Z., Song, Y., Deng, W., Liu, Y., Zhang, H., & Li, X. F. (2025) · Journal of Vibroengineering · doi:10.21595/jve.2025.24690 · Cited by 4 · see citing works
Massaro, A. S. (2025) · Machines · doi:10.3390/machines13090755 · Cited by 5 · see citing works
Digital Twin and Human Digital Twin for Practical Implementation in Industry 5.0
Coşgun, A. E. (2023) · Advances in computational intelligence and robotics book series · doi:10.4018/978-1-6684-7791-5.ch007 · Cited by 4 · see citing works
Smart and Digital World: The Technologies Needed for Digital Twins and Human Digital Twins
Coşgun, A. E. (2024) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4065643 · Cited by 4 · see citing works
Artificial Intelligence Based Spacecraft Resilience Optimization in Space Informatics Digital Twins
Lv, Z., Guo, J., Lou, R., & Lv, H. (2024) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2024.3459879 · Cited by 4 · see citing works
Mohammadi, F., Montazeri, S. H., Ayatollahi, F. S., Emamian, M., Danaeifar, S., Arani, Z. D., Javid, H. R. P., MotieShirazi, F., Tayebli, R., Mohammadisharmeh, S., et al. (2026) · Sustainable Cities and Society · doi:10.1016/j.scs.2026.107179 · Cited by 3 · see citing works
Ordóñez-Bolaños, O.-A., Martínez, L. M. S., & Peluffo-Ordóñez, D. H. (2023) · Revista Facultad de Ingeniería · doi:10.19053/01211129.v32.n63.2023.15254 · Cited by 3 · see citing works
Leveraging the ISO 23247 Framework for the Development of Digital Twins of Stacker Cranes
Sobowale, A., Freitas, L., Lima, A., Marujo, P., Pereira, F. A. D. S., & Lopes, H. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-61582-5_4 · Cited by 3 · see citing works
Liu, M., Gong, Y. J., Wang, X., Liu, C., & Hu, J. (2024) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-024-01068-8 · Cited by 4 · see citing works
Bao, Z., Siraj, S. B., & Halili, S. H. (2025) · International Conference on Control and Robot Technology (ICCRT) · doi:10.1109/iccrt63554.2025.11072760 · Cited by 2 · see citing works
Smart Manufacturing Innovation Through the Integration of Digital Twin and IoT Energy Management
Kwon, Y. (2025) · International Journal of Control Automation and Systems · doi:10.1007/s12555-025-0046-1 · Cited by 2 · see citing works
Advancing bridge health assessment and management through Digital Twins: a comprehensive review
Yousuf, M. M., Saravanan, T. J., & Dash, S. R. (2026) · Structural Health Monitoring · doi:10.1177/14759217251403381 · Cited by 2 · see citing works
Meng, W., Li, S., Gao, R., Yue, Z., Tu, Z., & Chu, D. (2026) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2026.103321 · Cited by 2 · see citing works
Construction of High-Precision Digital Twin Model and Real-Time Data Fusion Technology
Wang, Y., Zheng, B., & Xing, K. (2025) · International Conference on Digital Analysis and Processing, Intelligent Computation (DAPIC) · doi:10.1109/dapic66097.2025.00103 · Cited by 2 · see citing works
Leveraging Digital Twin Technology for Enhanced Patient Care and Predictive Health Management
AWASTHI, N., & Mishra, R. (2025) · ANALISTA International Journal of Multidisciplinary Research · doi:10.71182/aijmr.2506.0301.4004 · Cited by 1 · see citing works
Simulation-based maintenance systems: a systematic review
Liu, P. S., Chin, J. F., Ab-Samat, H., & Muhammad, N. A. (2025) · Journal of Simulation · doi:10.1080/17477778.2025.2579125 · Cited by 1 · see citing works
Zvyagin, L. S. (2025) · Computational nanotechnology · doi:10.33693/2313-223x-2025-12-4-51-60 · Cited by 1 · see citing works
Royandi, M. A., Lin, W.-Z., Hung, J., Lai, Y.-S., & Su, Z.-M. (2026) · Machines · doi:10.3390/machines14050579 · Cited by 1 · see citing works
Zhang, Y., Qian, X., Tang, R., Xi, C., Cui, T., & Tang, Z. (2026) · Sensors · doi:10.3390/s26175679 · Cited by 1 · see citing works
A Digital Twin for Insect Wing Aerodynamics
Li, J., Margetts, L., & Nabawy, M. R. A. (2025) · AIAA SciTech Forum · doi:10.2514/6.2025-1471 · Cited by 1 · see citing works
Digital twin for integration of design, manufacturing, and maintenance
(2023) · Research outreach · doi:10.32907/ro-134-3837001121
Digital Technologies Within the Accuracy of Processing Low-Rigid Workpieces on CNC Machines
Tempel, Y. A., Tempel, O. A., Surmyatova, Y. V., & Nekrasov, R. Y. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-38126-3_70
A Merging of Digital Twin and Decision-Making Concepts for Industrial Maintenance
dos Santos, C. F., de Oliveira, A. B., Loures, E. D. F. R., & Santos, E. A. P. (2023) · Springer eBooks · doi:10.1007/978-3-031-36121-0_44
Sippel, I., & Magdin, K. (2024) · Lecture notes in networks and systems · doi:10.1007/978-3-031-55349-3_4
From Static Models to Dynamic Systems: The Evolution of Business Process Simulation to Digital Twins
Prackwieser, C. (2024) · Springer eBooks · doi:10.1007/978-3-031-56862-6_11
Sippel, I., Magdin, K., & Evtyukov, S. (2024) · International Conference on Digital Transformation: Informatics, Economics, and Education · doi:10.1117/12.3035765 · Cited by 1 · see citing works
Семенович, З. Ю., & Fishchenko, E. (2024) · International Conference on Information, Control, and Communication Technologies (ICCT) · doi:10.1109/icct62929.2024.10874903
A Multi-domain Digital Twin Modeling Method for Complex Electromechanical Products
Wang, Z., Hu, Y., Yang, X., Shi, Z., Zhang, Z., & Li, X. (2024) · International Symposium on Robotics & Intelligent Manufacturing Technology (ISRIMT) · doi:10.1109/isrimt63979.2024.10875085
Meghasree, V., & Guptha, C. K. N. (2025) · IEEE Access · doi:10.1109/access.2025.3580674
Agourame, H., Masrour, T., & Ossmani, M. E. (2025) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-025-02410-7
Development of a Digital Twin of a Fiber-Optic Linear Motion Sensor
Tuv, A. L., Sheynkin, A. M., Akatov, M. S., & Opekunova, A. A. (2025) · International Russian Automation Conference (RusAutoCon) · doi:10.1109/rusautocon65989.2025.11177313
Unveiling the path to digital twin development models: a systematic review
Shafiee, S., & Ayat, M. (2025) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-025-03037-3
Zhang, Y., Hu, L., Wang, S., Hu, Y., Ji, C., Zhi, C., Hu, S., & Ma, L. (2025) · Processes · doi:10.3390/pr13124075 · Cited by 1 · see citing works
Yoşumaz, İ., Gülbaşı, A., & Bnengül, S. S. (2026) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2026.101079
Thakare, S. B., Patel, K., & Hawaldar, S. S. A. (2025) · International Conference on Engineering and Emerging Technologies (ICEET) · doi:10.1109/iceet67911.2025.11424096
Multiphase Measurement, Soft Sensors, Digital Twins: A Systematic Literature Review
Chacón, L. Y. C., Prada, S. R., & Sánchez, C. E. G. (2026) · Journal of the Brazilian Computer Society · doi:10.5753/jbcs.2026.6087
Li, X., Huang, W., Zhang, Z., Jiang, H., & Zhou, J. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-95-3019-9_46
Teli, S. N., Surange, V. G., Parasar, D., Bhat, A., & Teli, S. S. (2026) · Journal of The Institution of Engineers (India) Series C · doi:10.1007/s40032-026-01392-z
Koroteev, T. (2025) · Journal of Monetary Economics and Management · doi:10.26118/2782-4586.2025.32.94.036
Ontology-Driven Framework for Hierarchical Assembly Evaluation in Product Design
Zhong, J., Duan, X., Wang, J., Xu, Z., Zhu, X., & Ma, Y. (2026) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2026.3695562
Han, Y. (2026) · Journal of Physics Conference Series · doi:10.1088/1742-6596/3267/1/012002
The evolution framework and implementation method of digital twins throughout the full lifecycle
He, S., Wang, W., & Jia, W. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18589-2
Babu, A. V. S. (2026) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062261469000
Harsha, N., Gaonkar, A. K., & Adinarayanappa, S. M. (2025) · IEEE Conference on Engineering Informatics (ICEI) · doi:10.1109/icei68356.2025.11603682
Human-Centred Digital Twin: Concepts, Methods, and Technologies
Traoré, M. K., Poursoltan, M., Zahediyami, M., & Ali, Z. (2026) · Computational intelligence methods and applications · doi:10.1007/978-981-95-5271-9_3
Digital twin application in school facilities management
salunke, S., Nanda, S., Kumari, S., & Tyagi, A. K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-41632-3.00013-8
Prokopchina, S. V., & Zvyagin, L. S. (2026) · Computational nanotechnology · doi:10.33693/2313-223x-2026-13-2-269-277
Cho, I., & Kim, B. (2026) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2026-01-0818
Automatic Assembly & Optimization of Interference-Constrained Pipe Bending Tooling Schemes
Zhang, X., Wu, K., Bai, Y., Ren, X., & Liu, Z. (2026) · International Conference on Computer Network, Electronic and Automation (ICCNEA) · doi:10.1109/iccnea70678.2026.11722020
Shrivastava, S. K., Shresth, K., Kumar, S., Kumar, A., & Sankilya, A. (2026) · SPE Annual Technical Conference and Exhibition · doi:10.2118/233967-ms
Sustainable Additive Manufacturing in Aerospace: Lifecycle Assessment and End-of-Life Strategies
Khan, S., Nahid, M., Islam, M. A., Biswas, R., Islam, S., Mohammad, S., & Hossain, N. (2026) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-026-11746-5
- Authors
- Fu, Y., Zhu, G., Zhu, M., & Xuan, F.
- Affiliations
- East China University of Science and Technology (CN)
- Venue
- Chinese Journal of Mechanical Engineering
- Publisher
- Elsevier BV
- Published
- 2022-06-23
- Volume
- 35
- Issue
- 1
- ISSN
- 1000-9345 (ISSN-L)
- 2192-8258
- OpenAlex
- W4283330351
- Cited by
- 98
- References
- 181
- Citations by year
- 2026: 21 · 2025: 29 · 2024: 29 · 2023: 18 · 2022: 1
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Locations
- Chinese Journal of Mechanical Engineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51922041, 51835003)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Manufacturing Process and Optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Keywords
- digital twin, mechanical devices, product life cycle, intelligent maintenance, sensor technology, engineering components
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
