The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Degradation of poly-L-lactide. Part 1: in vitro and in vivo physiological temperature degradation
Abstract
Poly-L-lactide (PLLA) is one of the most significant members of a group of polymers regarded as bioresorbable. The degradation of PLLA proceeds through hydrolysis of the ester linkage in the polymer's backbone and is influenced by the polymer's initial molecular weight and degree of crystallinity. To evaluate its degradation PLLA pellets were processed by compression moulding into tensile test specimens and by extrusion into 2 mm diameter lengths of rod, prior to being sterilized by ethylene oxide gas (EtO) and degraded in both in vitro and in vivo environments. On retrieval at predetermined time intervals, procedures were used to evaluate the material's molecular weight, crystallinity, mechanical strength, and thermal properties. Additionally, the in vivo host tissue's biological response was analysed. The results from this study suggest that in both the in vitro and in vivo environments, degradation proceeded at the same rate and followed the general sequence of aliphatic polyester degradation, ruling out enzymes contributing and accelerating the degradation rate in vivo. Additionally, the absence of cells marking an inflammatory response suggests that the PLLA rods investigated in vivo were biocompatible throughout the 44 weeks duration of the study, before any mass loss was observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Orthopaedic applications for PLA‐PGA biodegradable polymers
Athanasiou, K., Agrawal, C., Barber, F., & Burkhart, S. (1998) · Arthroscopy · doi:10.1016/s0749-8063(98)70099-4 · Cited by 487
Research works printed but not linked: 52
- 10.1243/0954411981533872 · DOI · Paper page
- Chasin M., Biomedical Applications of Synthetic Biodegradable Polymers, 1
- Chaignaud B. E., Synthetic Biodegradable Polymer Scaffolds, 1
- Li S., Degradable Polymers Principles & Applications, 43
- Chu C. C., The Biomedical Engineering Handbook, 611
- 10.1001/archsurg.1966.01330050143023 · DOI · Paper page
- 10.1016/0267-6605(92)90088-B · DOI
- 10.5435/00124635-200109000-00001 · DOI · Paper page
- Barber F. A., 2002, Orthopedic Special Edn, 8, 29
- 10.1016/0079-6700(94)90030-2 · DOI · Paper page
- 10.1002/(SICI)1097-4636(1999)48:3<342::AID-JBM20>3.0.CO;2-7 · DOI · Paper page
- 10.1016/0267-6605(92)90077-7 · DOI
- 10.1002/jbm.820271108 · DOI · Paper page
- Chu C. C., Biomedical Applications of Synthetic Biodegradable Polymers, 103
- 10.1002/(SICI)1097-4636(19970905)36:3<360::AID-JBM11>3.0.CO;2-I · DOI
- 10.1007/BF00701077 · DOI · Paper page
- 10.1023/A:1017925019985 · DOI
- 10.1016/0142-9612(95)93253-A · DOI · Paper page
- 10.1016/0142-9612(95)91092-D · DOI · Paper page
- 10.1016/j.biomaterials.2003.10.076 · DOI · Paper page
- 10.1007/BF00701239 · DOI
- 10.1016/S0142-9612(02)00140-0 · DOI
- 10.1016/0142-9612(96)85755-3 · DOI · Paper page
- 10.1016/0032-3861(81)90168-3 · DOI · Paper page
- Anderson J. M., Biomedical Applications of Synthetic Biodegradable Polymers, 223
- 10.1016/0168-3659(87)90020-4 · DOI · Paper page
- Dickson G. R., Methods of Calcified Tissue Preparation, 79
- Boyde A., Methods of Calcified Tissue Preparation, 251
- 10.1023/A:1024542103314 · doi:10.1023/a:1024542103314
- Pohjonen T., Biodegradable Implants in Fracture Fixation, 75
- 10.1007/BF00701240 · DOI · Paper page
- 10.1007/BF00700872 · DOI · Paper page
- 10.1016/0142-9612(93)90121-H · DOI · Paper page
- 10.1016/S0142-9612(02)00170-9 · DOI · Paper page
- 10.1016/S0169-409X(02)00051-0 · DOI · Paper page
- 10.1016/0142-9612(95)98816-W · DOI
- 10.1016/S0032-3861(98)00846-5 · DOI · Paper page
- 10.1163/156856200744318 · DOI
- 10.1243/0954411001535642 · DOI
- 10.1016/0040-6031(85)85633-1 · DOI
- 10.1016/S0142-9612(00)00132-0 · DOI · Paper page
- 10.1002/jbm.820190408 · DOI · Paper page
- 10.1097/00001665-199703000-00004 · DOI · Paper page
- 10.1016/0142-9612(90)90065-X · doi:10.1016/0142-9612(90)90065-x
- 10.1002/jbm.820261203 · DOI · Paper page
- 10.1002/(SICI)1097-4636(19980905)41:3<443::AID-JBM14>3.0.CO;2-J · DOI
- 10.1002/app.1981.070261124 · DOI · Paper page
- 10.1016/0142-9612(95)94144-A · DOI · Paper page
- Timmins M. R., 1994, Trends in Polymer Science (TRIP), 2, 15
- Gutwald R., 2002, Injury, Int. J. Care Injured, 33, 10.1016/S0020-1383(02)00127-4 · DOI
- 10.1016/S0278-2391(98)90461-X · DOI · Paper page
- 10.1002/(SICI)1097-4636(19970915)36:4<536::AID-JBM12>3.0.CO;2-8 · DOI
Cited by
Lifetime prediction of biodegradable polymers
Laycock, B., Nikolić, M., Colwell, J. M., Gauthier, E., Halley, P., Bottle, S., & George, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.004 · Cited by 662
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering
Brydone, A. S., Meek, D., & Maclaine, S. (2010) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/09544119jeim770 · Cited by 456
Onuma, Y., & Serruys, P. W. (2011) · Circulation · doi:10.1161/circulationaha.110.971606 · Cited by 434
Metadata
- Authors
- Weir, N. A., Buchanan, F. J., Orr, J. F., & Dickson, G. R.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
- Publisher
- SAGE Publications
- Published
- 2004-05-01
- Volume
- 218
- Issue
- 5
- Pages
- 307-319
- ISSN
- 0954-4119 (ISSN-L)
- 2041-3033
- OpenAlex
- W2117688233
- Cited by
- 182
- References
- 5
- FWCI
- 1.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Degradation of poly-L-lactide. Part 1: in vitro and in vivo physiological temperature degradation. https://app.cochat.ai/papers/10.1243/0954411041932782
- The paper
- Weir, N. A., Buchanan, F. J., Orr, J. F., & Dickson, G. R. (2004). Degradation of poly-L-lactide. Part 1: in vitro and in vivo physiological temperature degradation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. https://doi.org/10.1243/0954411041932782
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.