CoChat

Solid State Transformers Topologies, Controllers, and Applications: State-of-the-Art Literature Review

Open access
Abu-Siada, Ahmed, Budiri, Jad, Abdou, Ahmed · 2018 · Electronics

The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.

Abstract

With the global trend to produce clean electrical energy, the penetration of renewable energy sources in existing electricity infrastructure is expected to increase significantly within the next few years. The solid state transformer (SST) is expected to play an essential role in future smart grid topologies. Unlike traditional magnetic transformer, SST is flexible enough to be of modular construction, enabling bi-directional power flow and can be employed for AC and DC grids. Moreover, SSTs can control the voltage level and modulate both active and reactive power at the point of common coupling without the need to external flexible AC transmission system device as per the current practice in conventional electricity grids. The rapid advancement in power semiconductors switching speed and power handling capacity will soon allow for the commercialisation of grid-rated SSTs. This paper is aimed at introducing a state-of-the-art review for SST proposed topologies, controllers, and applications. Additionally, strengths, weaknesses, opportunities, and threats (SWOT) analysis along with a brief review of market drivers for prospective commercialisation are elaborated.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/electronics7110298

Cites

94 of 94 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Solid state transformer (SST) topologies: ( a ) single stage, ( b ) two stages, and ( c ) three stages. Figure 1. Solid state transformer (SST) topologies: ( a ) single stage, ( b ) two stages, and ( c ) three stages.
Figure 1 Solid state transformer (SST) topologies: ( a ) single stage, ( b ) two stages, and ( c ) three stages. Figure 1. Solid state transformer (SST) topologies: ( a ) single stage, ( b ) two stages, and ( c ) three stages.CC-BY · From the PDF
Figure 2 Detailed single stage SST topology [17].
Figure 2 Detailed single stage SST topology [17].CC-BY · From the PDF
Figure 3 Market price of insulated gate bipolar transistors (IGBTs) [49]. Figure 3. Market price of insulated gate bipolar transistors (IGBTs) [49].
Figure 3 Market price of insulated gate bipolar transistors (IGBTs) [49]. Figure 3. Market price of insulated gate bipolar transistors (IGBTs) [49].CC-BY · From the PDF
Figure 4 Multi-level topologies: ( a ) Three-level neutral point clamped; ( b ) Three-level flying capacitor converter; ( c ) Cascaded H-bridge converter; ( d ) Modular multilevel converter [58]. Figure 4. Multi-level topologies: ( a ) Three-level neutral point clamped; ( b ) Three-level flying capacitor converter; ( c ) Cascaded H-bridge converter; ( d ) Modular multilevel converter [58].
Figure 4 Multi-level topologies: ( a ) Three-level neutral point clamped; ( b ) Three-level flying capacitor converter; ( c ) Cascaded H-bridge converter; ( d ) Modular multilevel converter [58]. Figure 4. Multi-level topologies: ( a ) Three-level neutral point clamped; ( b ) Three-level flying capacitor converter; ( c ) Cascaded H-bridge converter; ( d ) Modular multilevel converter [58].CC-BY · From the PDF
Figure 5 Switching frequency vs. power rating of different semiconductors [63]. Figure 5. Switching frequency vs. power rating of different semiconductors [63].
Figure 5 Switching frequency vs. power rating of different semiconductors [63]. Figure 5. Switching frequency vs. power rating of different semiconductors [63].CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure 7 Integrating a squirrel cage induction generator (SCIG) to the grid: ( a ) typical; ( b ) using SSTs [29]. Figure 7. Integrating a squirrel cage induction generator (SCIG) to the grid: ( a ) typical; ( b ) using SSTs [29].
Figure 7 Integrating a squirrel cage induction generator (SCIG) to the grid: ( a ) typical; ( b ) using SSTs [29]. Figure 7. Integrating a squirrel cage induction generator (SCIG) to the grid: ( a ) typical; ( b ) using SSTs [29].CC-BY · From the PDF
Figure 8 Integrating doubly fed induction generator (DFIG) to the grid: ( a ) typical; ( b ) using SSTs Figure 8. Integrating doubly fed induction generator (DFIG) to the grid: ( a ) typical; ( b ) using SSTs [28,84,85].
Figure 8 Integrating doubly fed induction generator (DFIG) to the grid: ( a ) typical; ( b ) using SSTs Figure 8. Integrating doubly fed induction generator (DFIG) to the grid: ( a ) typical; ( b ) using SSTs [28,84,85].CC-BY · From the PDF
Image 9
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 4

  1. Khomfoi, S.; Tolbert, L.M. Power Electronics Handbook; Elsevier Inc.: Amsterdam, The Netherlands, 2007.
  2. Friedrichs, P. Future of Wide Band Gap Power Semiconductors. In Proceedings of the European Conference on Power Electronics and Applications, Karlsruhe, Germany, 5-9 September 2016.
  3. Abdou, A.F.; Abu-Siada, A.; Pota, H.R. Application of a STATCOM for damping subsynchronous oscillations and transient stability improvement. In Proceedings of the AUPEC 2011, Brisbane, Australia, 25-28 September 2011; pp. 1-5. · DOI
  4. Jie, Y., Zaijun, W., and Bhattacharya, S. (2013, January 21–25). Power dispatch strategy in microgrid integrated with solid state transformer. Proceedings of the 2013 IEEE Power & Energy Society General Meeting, Vancouver, BC, Canada.

Cited by

See all 69

Metadata

Authors
Abu-Siada, A., Budiri, J., & Abdou, A.
Affiliations
  • Department of Electrical and Computer Engineering, Curtin University, Bentley, WA6102, Australia
  • Curtin University (AU)
  • UNSW Canberra (AU)
Venue
Electronics
Publisher
MDPI AG
Published
2018-11-05
Volume
7
Issue
11
Pages
298
ISSN
2079-9292 (ISSN-L)
OpenAlex
W2899944453
Cited by
69
References
94
Citations by year
2026: 4 · 2025: 5 · 2024: 7 · 2023: 11 · 2022: 12 · 2021: 10 · 2020: 11 · 2019: 8 · 2018: 1
FWCI
2.87
Type
journal article
Language
en
Open access
Locations
  • Electronics (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • eSpace (Curtin University) (submittedVersion, cc-by)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
Keywords
solid-state transformer, transformer topology, smart grid, renewable energy integration, bidirectional power flow, DC grid, AC grid, point of common coupling, voltage regulation, power semiconductor switching, commercialization, SWOT analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.