Enhanced Regeneration of Vascularized Adipose Tissue with Dual 3D-Printed Elastic Polymer/dECM Hydrogel Complex
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
A flexible and bioactive scaffold for adipose tissue engineering was fabricated and evaluated by dual nozzle three-dimensional printing. A highly elastic poly (L-lactide-co-ε-caprolactone) (PLCL) copolymer, which acted as the main scaffolding, and human adipose tissue derived decellularized extracellular matrix (dECM) hydrogels were used as the printing inks to form the scaffolds. To prepare the three-dimensional (3D) scaffolds, the PLCL co-polymer was printed with a hot melting extruder system while retaining its physical character, similar to adipose tissue, which is beneficial for regeneration. Moreover, to promote adipogenic differentiation and angiogenesis, adipose tissue-derived dECM was used. To optimize the printability of the hydrogel inks, a mixture of collagen type I and dECM hydrogels was used. Furthermore, we examined the adipose tissue formation and angiogenesis of the PLCL/dECM complex scaffold. From in vivo experiments, it was observed that the matured adipose-like tissue structures were abundant, and the number of matured capillaries was remarkably higher in the hydrogel–PLCL group than in the PLCL-only group. Moreover, a higher expression of M2 macrophages, which are known to be involved in the remodeling and regeneration of tissues, was detected in the hydrogel–PLCL group by immunofluorescence analysis. Based on these results, we suggest that our PLCL/dECM fabricated by a dual 3D printing system will be useful for the treatment of large volume fat tissue regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668 · cited 1×
“Thus, the cellular behavior for new tissue reconstruction can be affected by the material properties of the scaffold such as the porosity, pore size, and interconnectivity [52].”
BackgroundPrinting three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · cited 2×
“The decellularization process for adipose tissue was performed by following the method published elsewhere with a small modification [42].”
MethodThe extracellular matrix as a biologic scaffold material
Badylak, S. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.04.043 · Cited by 1,022
The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis
Sung, H.-J., Meredith, C., Johnson, C., & Galis, Z. S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.066 · Cited by 804
Synthetic biodegradable functional polymers for tissue engineering: a brief review
Guo, B., & Ma, P. X. (2014) · Science China Chemistry · doi:10.1007/s11426-014-5086-y · Cited by 592
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217 · cited 1×
“The PLCL copolymer is degraded by heat [57,58], which could be confirmed by molecular weight changes and Young’s modulus loss after 3D printing.”
BackgroundJung, Y., Chung, Y.-I., Kim, S. H., Tae, G., Kim, Y. H., Rhie, J. W., Kim, S.-H., & Kim, S. H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.034 · Cited by 77 · cited 1×
“It has flexible, stretchable, and elastic properties and degrades slowly, which means that it not only has more suitable properties than other synthetic polymers for soft tissue engineering, but also overcomes the limitations of native hydrogels and provides a three-dimensional spatial structure [21].”
BackgroundSelf-citation
Cited by
Amirrah, I. N., Lokanathan, Y., Zulkiflee, I., Wee, M. F. M. R., Motta, A., & Fauzi, M. B. (2022) · Biomedicines · doi:10.3390/biomedicines10092307 · Cited by 426
Brown, M., Li, J., Moraes, C., Tabrizian, M., & Li-Jessen, N. Y. K. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121786 · Cited by 282
Xu, P., Kankala, R. K., Wang, S., & Chen, A. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbad107 · Cited by 129
Han, Y., Wang, H., Guan, Y., Li, S., Yuan, Z., Lu, L., & Zheng, X. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad407c · Cited by 7
“PLCL’s excellent biocompatibility makes the scaffold printed with human extracellular matrix composite similar to natural fat, which has a positive effect on promoting fat differentiation and vascularization [23].”
Background
Metadata
- Authors
- Lee, S., Lee, H. S., Chung, J. J., Kim, S. H., Park, J. W., Lee, K., & Jung, Y.
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2021-03-12
- Volume
- 22
- Issue
- 6
- Pages
- 2886
- ISSN
- 1422-0067 (ISSN-L)
- OpenAlex
- W3139467581
- Cited by
- 42
- References
- 10
- FWCI
- 2.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced Regeneration of Vascularized Adipose Tissue with Dual 3D-Printed Elastic Polymer/dECM Hydrogel Complex. https://app.cochat.ai/papers/10.3390/ijms22062886
- The paper
- Lee, S., Lee, H. S., Chung, J. J., Kim, S. H., Park, J. W., Lee, K., & Jung, Y. (2021). Enhanced Regeneration of Vascularized Adipose Tissue with Dual 3D-Printed Elastic Polymer/dECM Hydrogel Complex. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms22062886
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.