The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials
Open accessAbstract
Recently, Fused Filament Fabrication (FFF), one of the most encouraging additive manufacturing (AM) techniques, has fascinated great attention. Although FFF is growing into a manufacturing device with considerable technological and material innovations, there still is a challenge to convert FFF-printed prototypes into functional objects for industrial applications. Polymer components manufactured by FFF process possess, in fact, low and anisotropic mechanical properties, compared to the same parts, obtained by using traditional building methods. The poor mechanical properties of the FFF-printed objects could be attributed to the weak interlayer bond interface that develops during the layer deposition process and to the commercial thermoplastic materials used. In order to increase the final properties of the 3D printed models, several polymer-based composites and nanocomposites have been proposed for FFF process. However, even if the mechanical properties greatly increase, these materials are not all biodegradable. Consequently, their waste disposal represents an important issue that needs an urgent solution. Several scientific researchers have therefore moved towards the development of natural or recyclable materials for FFF techniques. This review details current progress on innovative green materials for FFF, referring to all kinds of possible industrial applications, and in particular to the field of Cultural Heritage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Kristiawan, R. B., Imaduddin, F., Ariawan, D., Ubaidillah, U., & Arifin, Z. (2021) · Open Engineering · doi:10.1515/eng-2021-0063 · Cited by 736
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., & Kochubabu, M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 523
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Additive manufacturing (AM) and nanotechnology: promises and challenges
Ivanova, O., Williams, C., & Campbell, T. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2011-0127 · Cited by 461
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Fused deposition modelling: a review
Vyavahare, S., Teraiya, S., Panghal, D., & Kumar, S. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2019-0106 · Cited by 426
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
Current status and future directions of fused filament fabrication
Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.049 · Cited by 385
3D printing filament as a second life of waste plastics—a review
Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10657-8 · Cited by 382
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Effect of wood content in FDM filament on properties of 3D printed parts
Kariz, M., Sernek, M., Obućina, M., & Kuzman, M. K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.016 · Cited by 360
Electrically conductive filament for 3D-printed circuits and sensors
Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.001 · Cited by 332
Melnikova, R., Ehrmann, A., & Finsterbusch, K. (2014) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/62/1/012018 · Cited by 326
3D printing of high density polyethylene by fused filament fabrication
Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.003 · Cited by 271
3D printing: State of the art and future perspectives
Balletti, C., Ballarin, M., & Guerra, F. (2017) · Journal of Cultural Heritage · doi:10.1016/j.culher.2017.02.010 · Cited by 266
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
Esposito Corcione, C., Gervaso, F., Scalera, F., Padmanabhan, S. K., Madaghiele, M., Montagna, F., Sannino, A., Licciulli, A., & Maffezzoli, A. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.07.297 · Cited by 242
Self-citationFused filament fabrication of peek: A review of process-structure-property relationships
Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240
Algarni, M., & Ghazali, S. (2021) · Crystals · doi:10.3390/cryst11080995 · Cited by 233
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228
Production and 3D printing processing of bio-based thermoplastic filament
Gkartzou, E., Koumoulos, E. P., & Charitidis, C. A. (2017) · Manufacturing Review · doi:10.1051/mfreview/2016020 · Cited by 222
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
Berretta, S., Davies, R., Shyng, Y. T., Wang, Y., & Ghita, O. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.024 · Cited by 218
Cork–PLA composite filaments for fused deposition modelling
Daver, F., Lee, K. P. M., Brandt, M., & Shanks, R. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.008 · Cited by 190
3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review
Pervaiz, S., Qureshi, T. A., Kashwani, G., & Kannan, S. (2021) · Materials · doi:10.3390/ma14164520 · Cited by 179
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Klippstein, H., Diaz De Cerio Sanchez, A., Hassanin, H., Zweiri, Y., & Seneviratne, L. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700552 · Cited by 176
Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173
Fused deposition modeling based polymeric materials and their performance: A review
Shanmugam, V., Pavan, M. V., Babu, K., & Karnan, B. (2021) · Polymer Composites · doi:10.1002/pc.26275 · Cited by 165
3D Printing for Cultural Heritage: Preservation, Accessibility, Research and Education
Neumüller, M., Reichinger, A., Rist, F., & Kern, C. (2014) · Lecture notes in computer science · doi:10.1007/978-3-662-44630-0_9 · Cited by 163
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review
Krajangsawasdi, N., Blok, L. G., Hamerton, I., Longana, M. L., Woods, B. K. S., & Ivanov, D. S. (2021) · Journal of Composites Science · doi:10.3390/jcs5010029 · Cited by 161
Medellin-Castillo, H. I., & Zaragoza-Siqueiros, J. (2019) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-019-0368-0 · Cited by 160
Digital Fabrication Techniques for Cultural Heritage: A Survey
Scopigno, R., Cignoni, P., Pietroni, N., Callieri, M., & Dellepiane, M. (2017) · Computer Graphics Forum · doi:10.1111/cgf.12781 · Cited by 158
Chen, X., Gao, C., Jiang, J., Wu, Y., Zhu, P., & Chen, G. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab388d · Cited by 157
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11071220 · Cited by 151
Jing, J., Chen, Y., Shi, S., Yang, L., & Lambin, P. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126218 · Cited by 147
Lignin nanoparticles by ultrasonication and their incorporation in waterborne polymer nanocomposites
González, M. N. G., Levi, M., Turri, S., & Griffini, G. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45318 · Cited by 139
Wood based bulk material in 3D printing processes for applications in construction
Henke, K., & Treml, S. (2012) · European Journal of Wood and Wood Products · doi:10.1007/s00107-012-0658-z · Cited by 137
Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133
Highly loaded fiber filled polymers for material extrusion: A review of current understanding
Fallon, J. J., McKnight, S. H., & Bortner, M. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100810 · Cited by 125
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Tran, T. N., Bayer, I. S., Heredia‐Guerrero, J. A., Frugone, M., Lagomarsino, M., Maggio, F., & Athanassiou, A. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700219 · Cited by 120
A review on wood powders in 3D printing: processes, properties and potential applications
Das, A. K., Agar, D. A., Rudolfsson, M., & Larsson, S. H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.110 · Cited by 119
Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process
Masood, S. H., & Song, W. (2005) · Assembly Automation · doi:10.1108/01445150510626451 · Cited by 114
Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing
Bardot, M. I., & Schulz, M. D. (2020) · Nanomaterials · doi:10.3390/nano10122567 · Cited by 111
Royan, N. R. R., Leong, J. S., Chan, W. N., Tan, J. R., & Shamsuddin, Z. S. B. (2021) · Polymers · doi:10.3390/polym13142289 · Cited by 111
A numerical study of the effect of viscoelastic stresses in fused filament fabrication
Xia, H., Lu, J., & Tryggvason, G. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.11.031 · Cited by 108
Nelson, M. D., Ramkumar, N., & Gale, B. K. (2019) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ab2f26 · Cited by 91
3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
Corcione, C. E., Gervaso, F., Scalera, F., Montagna, F., Maiullaro, T., Sannino, A., & Maffezzoli, A. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2016-0194 · Cited by 90
3D printed antibacterial silver nanowire/polylactide nanocomposites
Bayraktar, I., Doğanay, D., Coşkun, Ş., Kaynak, C., Akca, G., & Ünalan, H. E. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.059 · Cited by 88
Guen, M.-J. L., Hill, S., Smith, D. A., Theobald, B., Gaugler, E. C., Barakat, A., & Mayer‐Laigle, C. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00735 · Cited by 87
Anastasiadou, C., & Vettese, S. (2018) · Tourism Management · doi:10.1016/j.tourman.2018.10.032 · Cited by 86
High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing
Farina, I., Singh, N., Colangelo, F., Luciano, R., Bonazzi, G., & Fraternali, F. (2019) · Materials · doi:10.3390/ma12233955 · Cited by 85
Sustainable Materials for Fused Deposition Modeling 3D Printing Applications
Rett, J. P., Traoré, Y. L., & Ho, E. A. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001472 · Cited by 84
Corcione, C. E., Scalera, F., Gervaso, F., Montagna, F., Sannino, A., & Maffezzoli, A. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7155-5 · Cited by 81
From materials to devices using fused deposition modeling: A state-of-art review
Zhang, P., Wang, Z., Li, J., Li, X., & Cheng, L. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0101 · Cited by 81
Romani, A., Rognoli, V., & Levi, M. (2021) · Sustainability · doi:10.3390/su13137269 · Cited by 81
Corcione, C. E., Palumbo, E., Masciullo, A., Montagna, F., & Torricelli, M. C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.011 · Cited by 80
Manufacture of polyurethane foam parts for automotive industry using FDM 3D printed molds
Romero, P. E., Arribas-Barrios, J., Rodríguez‐Alabanda, Ó., González, R., & Guerrero‐Vaca, G. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2021.01.019 · Cited by 80
Photopolymerization kinetics of an epoxy‐based resin for stereolithography
Corcione, C. E., Greco, A., & Maffezzoli, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20347 · Cited by 79
Waste office paper filled polylactic acid composite filaments for 3D printing
Tao, Y., Liu, M., Han, W., & Li, P. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108998 · Cited by 77
Vidakis, N., Petousis, M., Korlos, A., Velidakis, E., Mountakis, N., Charou, C., & Myftari, A. (2021) · Polymers · doi:10.3390/polym13162752 · Cited by 76
Antimicrobial modified hydroxyapatite composite dental bite by stereolithography
Makvandi, P., Corcione, C. E., Paladini, F., Gallo, A. L., Montagna, F., Jamaledin, R., Pollini, M., & Maffezzoli, A. (2017) · Polymers for Advanced Technologies · doi:10.1002/pat.4123 · Cited by 73
Lendvai, L., Singh, T., Fekete, G., Patnaik, A., & Dogossy, G. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02091-9 · Cited by 71
3D printable thermoplastic polyurethane blends with thermal energy storage/release capabilities
Rigotti, D., Dorigato, A., & Pegoretti, A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.03.009 · Cited by 69
Tenhunen, T.-M., Moslemian, O., Kammiovirta, K., Harlin, A., Kääriäinen, P., Österberg, M., Tammelin, T., & Orelma, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.012 · Cited by 67
Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites
Velarde, V. F., Diaz‐Vidal, T., Cisneros‐López, E. O., Robledo‐Ortíz, J. R., Lopez-Naranjo, E. J., Gudiño, P. O., & Rosales‐Rivera, L. C. (2021) · Materials · doi:10.3390/ma14113111 · Cited by 61
Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing
Zhao, D. X., Cai, X., Shou, G., et al. (2015) · Key engineering materials · doi:10.4028/www.scientific.net/kem.667.250 · Cited by 58
Ahlhelm, M., Günther, P. A., Scheithauer, U., et al. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.12.020 · Cited by 55
Processing and production of bioresorbable polymer scaffolds for tissue engineering
Walker, J. L., & Santoro, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100262-9.00009-4 · Cited by 54
3D Printing of Polymer Waste for Improving People’s Awareness about Marine Litter
Ferrari, F., Corcione, C. E., Montagna, F., & Maffezzoli, A. (2020) · Polymers · doi:10.3390/polym12081738 · Cited by 53
Gao, X., Yu, N., & Li, J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819535-2.00010-7 · Cited by 49
3D printing in the battle against COVID-19
Aydin, A., Demirtas, Z. E., Ok, M., Erkus, H., Çebi, G., Uysal, E., Gündüz, O., & Üstündağ, C. B. (2021) · Emergent Materials · doi:10.1007/s42247-021-00164-y · Cited by 43
John, M. J., Dyanti, N., Mokhena, T. C., Agbakoba, V. C., & Sithole, B. B. (2021) · Materials · doi:10.3390/ma14133462 · Cited by 39
Development and testing of material extrusion additive manufactured polymer–textile composites
Loh, G. H., Sotayo, A., & Pei, E. (2021) · Fashion and Textiles · doi:10.1186/s40691-020-00232-7 · Cited by 34
Dias, D., Vale, A. C., Cunha, E., Paiva, M. C., Reis, R. L., Vaquette, C., & Alves, N. M. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34761 · Cited by 30
Calcagnile, P., Cacciatore, G., Demitri, C., Montagna, F., & Corcione, C. E. (2018) · Materials · doi:10.3390/ma11091578 · Cited by 28
Wei, B., Yang, S., & Wang, Q. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5289 · Cited by 26
3D printed composites with uniform distribution of Fe3O4 nanoparticles and magnetic shape anisotropy
Kania, A., Berent, K., Mazur, T., & Sikora, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102149 · Cited by 20
Cobos, C., Fenollar, O., López, J., Bou, S. F., & Garzón, L. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2019-0217 · Cited by 17
Ghiban, B., Pascu, N. E., Antoniac, I., Jiga, G. G., Milea, C., Petre, G., Gheorghe, C., Munteanu, C., & Istrate, B. (2021) · Coatings · doi:10.3390/coatings11060633 · Cited by 17
Poly(Lactic Acid)/Graphite Nanoplatelet Nanocomposite Filaments for Ligament Scaffolds
Silva, M. D. S. S. M., Gomes, C., Pinho, I., Gonçalves, H., Vale, A. C., Covas, J. A., Alves, N. M., & Paiva, M. C. (2021) · Nanomaterials · doi:10.3390/nano11112796 · Cited by 16
Development of new nanocomposites for 3D printing applications
Dul, S., Fambri, L., & Pegoretti, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819535-2.00002-8 · Cited by 13
Fotia, A., Modafferi, A., Nunnari, A., & D’Amico, S. (2021) · WSEAS TRANSACTIONS ON ENVIRONMENT AND DEVELOPMENT · doi:10.37394/232015.2021.17.46 · Cited by 10
Sia, C. C. V., NAKAI, Y., TANAKA, H. L., et al. (2014) · Open Journal of Composite Materials · doi:10.4236/ojcm.2014.42011 · Cited by 4
Cited by
Balu, R., Dutta, N. K., & Roy Choudhury, N. (2022) · Polymers · doi:10.3390/polym14224788 · Cited by 121
Metadata
- Authors
- Fico, D., Rizzo, D., Casciaro, R., & Esposito Corcione, C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-01-24
- Volume
- 14
- Issue
- 3
- Pages
- 465
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4213371318
- Cited by
- 265
- References
- 105
- FWCI
- 14.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.