The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Electrospun Polycaprolactone (PCL) Degradation: An In Vitro and In Vivo Study
Open accessAbstract
Polycaprolactone (PCL) is widely used in tissue engineering due to its interesting properties, namely biocompatibility, biodegradability, elastic nature, availability, cost efficacy, and the approval of health authorities such as the American Food and Drug Administration (FDA). The PCL degradation rate is not the most adequate for specific applications such as skin regeneration due to the hydrophobic nature of bulk PCL. However, PCL electrospun fiber meshes, due to their low diameters resulting in high surface area, are expected to exhibit a fast degradation rate. In this work, in vitro and in vivo degradation studies were performed over 90 days to evaluate the potential of electrospun PCL as a wound dressing. Enzymatic and hydrolytic degradation studies in vitro, performed in a static medium, demonstrated the influence of lipase, which promoted a rate of degradation of 97% for PCL meshes. In an in vivo scenario, the degradation was slower, although the samples were not rejected, and were well-integrated in the surrounding tissues inside the subcutaneous pockets specifically created.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Polymeric systems for controlled drug release
Uhrich, K. E., Cannizzaro, S. M., Langer, R. S., & Shakesheff, K. M. (1999) · Chemical Reviews · doi:10.1021/cr940351u · Cited by 2,633
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review
Dash, T. K., & Konkimalla, V. B. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.09.064 · Cited by 1,016
CHONG, E., PHAN, T., LIM, I., ZHANG, Y., BAY, B., RAMAKRISHNA, S., & LIM, C. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.01.002 · Cited by 919
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750
Design, fabrication and characterization of PCL electrospun scaffolds—a review
Cipitria, A., Skelton, A., Dargaville, T. R., Dalton, P. D., & Hutmacher, D. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04502k · Cited by 627
Cellular materials as porous scaffolds for tissue engineering
Freyman, T. M., Yannas, I. V., & Gibson, L. J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00018-9 · Cited by 584
Scaffold: A Novel Carrier for Cell and Drug Delivery
Garg, T., Singh, O., Arora, S., & Murthy, R. S. R. (2012) · Critical Reviews in Therapeutic Drug Carrier Systems · doi:10.1615/critrevtherdrugcarriersyst.v29.i1.10 · Cited by 549
Synthetic biopolymer nanocomposites for tissue engineering scaffolds
Okamoto, M., & John, B. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.001 · Cited by 509
He, W., Ma, Z., Yong, T., Teo, W. E., & Ramakrishna, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.049 · Cited by 468
New perspectives in mercury porosimetry
León y León, C. A. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00052-9 · Cited by 464
Foreign Body Reaction to Biomaterials: On Mechanisms for Buildup and Breakdown of Osseointegration
Trindade, R., Albrektsson, T., Tengvall, P., & Wennerberg, A. (2016) · Clinical Implant Dentistry and Related Research · doi:10.1111/cid.12274 · Cited by 419
Chanda, M., & Roy, S. K. (2006) · CRC Press eBooks · doi:10.1201/9781420006360 · Cited by 386
Hydrogel sheets of chitosan, honey and gelatin as burn wound dressings
Wang, T., Zhu, X.-K., Xue, X.-T., & Wu, D.-Y. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.069 · Cited by 326
Bölgen, N., Menceloğlu, Y. Z., Acatay, K., Vargel, İ., & Pişkin, E. (2005) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856205774576655 · Cited by 311
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Biocompatibility of Subcutaneously Implanted Plant-Derived Cellulose Biomaterials
Modulevsky, D. J., Cuerrier, C. M., & Pelling, A. E. (2016) · PLOS ONE · doi:10.1371/journal.pone.0157894 · Cited by 254
Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing
Liu, S.-J., Kau, Y.-C., Chou, C.-Y., Chen, J.-K., Wu, R.-C., & Yeh, W.-L. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.03.012 · Cited by 253
Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering
Patrício, T., Domingos, M., Gloria, A., & Bártolo, P. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.022 · Cited by 196
Self-citationAzevedo, H., & Reis, R. (2004) · Biodegradable Systems in Tissue Engineering and Regenerative Medicine · doi:10.1201/9780203491232.ch12 · Cited by 191
In Vitro Assessment of the Enzymatic Degradation of Several Starch Based Biomaterials
Azevedo, H. S., Gama, F. M., & Reis, R. L. (2003) · Biomacromolecules · doi:10.1021/bm0300397 · Cited by 189
Electrospinning of type I collagen and PCL nanofibers using acetic acid
Chakrapani, V. Y., Gnanamani, A., Giridev, V. R., Madhusoothanan, M., & SEKARAN, G. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36504 · Cited by 186
Advances in electrospun skin substitutes
Dias, J. R., Granja, P. L., & Bártolo, P. J. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.006 · Cited by 183
Self-citationHydrolytic and enzymatic degradation of a poly(ε-caprolactone) network
Castilla-Cortázar, I., Más-Estellés, J., Meseguer-Dueñas, J. M., Escobar Ivirico, J. L., Marí, B., & Vidaurre, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.038 · Cited by 181
Lipase in serum--the elusive enzyme: an overview
Tietz, N. W., & Shuey, D. F. (1993) · Clinical Chemistry · doi:10.1093/clinchem/39.5.746 · Cited by 181
Physicochemical characterisation of degrading polycaprolactone scaffolds
Bosworth, L. A., & Downes, S. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.09.007 · Cited by 170
Gomes, M. E., Azevedo, H. S., Moreira, A. R., Ellä, V., Kellomäki, M., & Reis, R. L. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.89 · Cited by 161
Pan, J., Liu, N.-H., Sun, H., & Xu, F. (2014) · PLoS ONE · doi:10.1371/journal.pone.0112885 · Cited by 144
Methodology to determine failure characteristics of planar soft tissues using a dynamic tensile test
Jacquemoud, C., Bruyère-Garnier, K., & Coret, M. (2006) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2005.12.010 · Cited by 139
Xue, J., He, M., Liang, Y., Crawford, A., Coates, P. D., Chen, D., Shi, R., & Zhang, L. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00737a · Cited by 112
Some Mechanical Properties of Human Abdominal Skin Measured on Excised Strips
Jansen, L. H., & Rottier, P. B. (2009) · Dermatologica · doi:10.1159/000255569 · Cited by 109
In situ crosslinked electrospun gelatin nanofibers for skin regeneration
Dias, J. R., Baptista-Silva, S., Oliveira, C., et al. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.015 · Cited by 100
Self-citationPeng, H. H., Ling, J., Liu, J., Zhu, N., Ni, X., & Shen, Z. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.12.005 · Cited by 94
Hivechi, A., Bahrami, S. H., Siegel, R. A., Milan, P. B., & Amoupour, M. (2020) · Cellulose · doi:10.1007/s10570-020-03106-9 · Cited by 87
Picciani, P. H. S., Medeiros, E. S. D., Pan, Z., Wood, D. F., Orts, W. J., Mattoso, L. H. C., & Soares, B. G. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000019 · Cited by 65
Shi, R., Xue, J., Wang, H., Wang, R., Gong, M., Chen, D., Zhang, L., & Tian, W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00261c · Cited by 63
Biomechanical performance of hybrid electrospun structures for skin regeneration
Dias, J. R., Baptista-Silva, S., Sousa, A., et al. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.08.050 · Cited by 42
Self-citationAlkaline degradation study of linear and network poly(ε-caprolactone)
Dueñas, J. M. M., Más-Estellés, J., Castilla-Cortázar, I., Ivirico, J. L. E., & Vidaurre, A. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4182-6 · Cited by 39
Golchin, A., & Nourani, M. R. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.4960 · Cited by 39
Ferreira, C. A. M., Januário, A. P., Félix, R., Alves, N. M., Lemos, M. F. L., & Dias, J. R. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13122152 · Cited by 37
Self-citationKhang, A., Ravishankar, P., Krishnaswamy, A., Anderson, P. K., Cone, S. G., Liu, Z., Qian, X., & Balachandran, K. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33791 · Cited by 35
Li, H., Huang, C., Jin, X., & Ke, Q. (2018) · RSC Advances · doi:10.1039/c8ra02059k · Cited by 35
Natu, M. V., de Sousa, H. C., & Gil, M. H. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.10.030 · Cited by 34
Shi, R., Xue, J., Wang, H., Wang, R., Gong, M., Chen, D., Zhang, L., & Tian, W. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb90174j · Cited by 28
Jiang, T., Zhang, G., He, W., Li, H., & Jin, X. (2014) · Journal of Nanomaterials · doi:10.1155/2014/837695 · Cited by 15
Cited by
Khouri, N. G., Bahú, J. O., Blanco-Llamero, C., Severino, P., Concha, V. O. C., & Souto, E. B. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.138243 · Cited by 403
Snyder, Y., & Jana, S. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01430 · Cited by 15
Ngwenya, M., Gumede, T. P., Pérez Camargo, R. A., & Motloung, B. (2025) · Materials · doi:10.3390/ma18225172 · Cited by 9
“The recent literature has increasingly focused on alternative synthesis routes, including enzyme-catalyzed and organo-catalytic polymerization, to address concerns about the residual toxicity of tin-based catalysts such as stannous octoate in biomedical applications [42–44].”
Saidin, S., Zubairi, S. I., Ambreen, J., Md Lazim, N. A., Sadia, M., Lim, J. T. W., Ulum, M. F., Elliyanti, A., & Sefat, F. (2026) · BioMedical Engineering OnLine · doi:10.1186/s12938-026-01550-5 · Cited by 8
Metadata
- Authors
- Dias, J. R., Sousa, A., Augusto, A., Bártolo, P. J., & Granja, P. L.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-08-19
- Volume
- 14
- Issue
- 16
- Pages
- 3397
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4292553524
- Cited by
- 293
- References
- 50
- FWCI
- 11.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.