The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
Bio-Based Polymers with Potential for Biodegradability
Open accessAbstract
A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid) (PLA), widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitin and chitosan: Properties and applications
Rinaudo, M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.06.001 · Cited by 8,259
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
A review of chitin and chitosan applications
Ravi Kumar, M. N. V. (2000) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(00)00038-9 · Cited by 6,009
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Adsorption of dyes and heavy metal ions by chitosan composites: A review
Wan Ngah, W. S., Teong, L. C., & Hanafiah, M. A. K. M. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.004 · Cited by 2,045
Langer, R. (1990) · Science · doi:10.1126/science.2218494 · Cited by 1,778
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Vroman, I., & Tighzert, L. (2009) · Materials · doi:10.3390/ma2020307 · Cited by 1,355
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Polymers from Renewable Resources: A Challenge for the Future of Macromolecular Materials
Gandini, A. (2008) · Macromolecules · doi:10.1021/ma801735u · Cited by 1,113
Recent advances in lactic acid production by microbial fermentation processes
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.002 · Cited by 1,022
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
Lactic acid: recent advances in products, processes and technologies — a review
Datta, R., & Henry, M. (2006) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1486 · Cited by 973
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics
Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 937
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Lactic acid as a platform chemical in the biobased economy: the role of chemocatalysis
Dusselier, M., Van Wouwe, P., Dewaele, A., Makshina, E., & Sels, B. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00069a · Cited by 827
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.004 · Cited by 814
Nishino, T., Matsuda, I., & Hirao, K. (2004) · Macromolecules · doi:10.1021/ma049300h · Cited by 802
Polymers from triglyceride oils
Seniha Güner, F., Yağcı, Y., & Tuncer Erciyes, A. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.07.001 · Cited by 785
Lactic acid properties, applications and production: A review
Castillo Martinez, F. A., Balciunas, E. M., Salgado, J. M., Domínguez González, J. M., Converti, A., & Oliveira, R. P. D. S. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.11.007 · Cited by 762
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Biodegradability and biodegradation of poly(lactide)
Tokiwa, Y., & Calabia, B. P. (2006) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-006-0488-1 · Cited by 665
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2011) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2011.06.017 · Cited by 596
Weng, Y.-X., Jin, Y.-J., Meng, Q.-Y., Wang, L., Zhang, M., & Wang, Y.-Z. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.05.001 · Cited by 596
Handbook of Thermoset Plastics
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-09694-1 · Cited by 532
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Start a Research on Biopolymer Polyhydroxyalkanoate (PHA): A Review
Tan, G.-Y., Chen, C.-L., Li, L., Ge, L., Wang, L., Razaad, I., Li, Y., Zhao, L., Mo, Y., & Wang, J.-Y. (2014) · Polymers · doi:10.3390/polym6030706 · Cited by 524
Biomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Kumar, M., Mohanty, S., Nayak, S. K., & Rahail Parvaiz, M. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.075 · Cited by 459
Mueller, R.-J. (2006) · Process Biochemistry · doi:10.1016/j.procbio.2006.05.018 · Cited by 428
Biodegradability of polylactide bottles in real and simulated composting conditions
Kale, G., Auras, R., Singh, S. P., & Narayan, R. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2007.07.006 · Cited by 421
Chitosan and gelatin based edible films: state diagrams, mechanical and permeation properties
Arvanitoyannis, I. S., Nakayama, A., & Aiba, S.-I. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00083-6 · Cited by 403
PLastic Films for Agricultural Applications
Espí, E., Salmerón, A., Fontecha, A., García, Y., & Real, A. I. (2006) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087906064220 · Cited by 395
Effect of structure on properties of polyols and polyurethanes based on different vegetable oils
Zlatanić, A., Lava, C., Zhang, W., & Petrović, Z. S. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10737 · Cited by 378
Lu, Y., & Larock, R. C. (2008) · Biomacromolecules · doi:10.1021/bm801030g · Cited by 377
Polyhydroxyalkanoate (PHA)/Inorganic Phase Composites for Tissue Engineering Applications
Misra, S. K., Valappil, S. P., Roy, I., & Boccaccini, A. R. (2006) · Biomacromolecules · doi:10.1021/bm060317c · Cited by 372
Biodegradation of poly(lactic acid) and its nanocomposites
Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., & Camino, G. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.07.001 · Cited by 368
Fossil fuel depletion and socio-economic scenarios: An integrated approach
Capellán-Pérez, I., Mediavilla, M., de Castro, C., Carpintero, Ó., & Miguel, L. J. (2014) · Energy · doi:10.1016/j.energy.2014.09.063 · Cited by 357
Azeredo, H. M. C., Mattoso, L. H. C., Avena‐Bustillos, R. J., Filho, G. C., Munford, M. L., Wood, D., & McHugh, T. H. (2010) · Journal of Food Science · doi:10.1111/j.1750-3841.2009.01386.x · Cited by 354
Biodegradable polymers—an overview
Doppalapudi, S., Jain, A., Khan, W., & Domb, A. J. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3305 · Cited by 348
Disintegrability under composting conditions of plasticized PLA–PHB blends
Arrieta, M. P., López, J., Rayón, E., & Jiménez, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.034 · Cited by 325
Lu, Y., & Larock, R. C. (2009) · ChemSusChem · doi:10.1002/cssc.200800241 · Cited by 324
Guo, C., Sun, L., Liao, W., & Li, Z. (2015) · Materials · doi:10.3390/ma9010001 · Cited by 320
Preparation and properties evaluation of chitosan-coated cassava starch films
Bangyekan, C., Aht-Ong, D., & Srikulkit, K. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.07.032 · Cited by 318
Biobased Epoxidized Vegetable Oils and Its Greener Epoxy Blends: A Review
Tan, S. G., & Chow, W. S. (2010) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2010.512338 · Cited by 316
Environmental Silicate Nano-Biocomposites
(2012) · Green Energy and Technology · doi:10.1007/978-1-4471-4108-2 · Cited by 300
Gorrasi, G., & Pantani, R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.005 · Cited by 290
Polylactide Degradation by an Amycolatopsis sp
Pranamuda, H., Tokiwa, Y., & Tanaka, H. (1997) · Applied and Environmental Microbiology · doi:10.1128/aem.63.4.1637-1640.1997 · Cited by 287
Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions
Iovino, R., Zullo, R., Rao, M. A., Cassar, L., & Gianfreda, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.011 · Cited by 286
New sheet molding compound resins from soybean oil. I. Synthesis and characterization
Lu, J., Khot, S., & Wool, R. P. (2005) · Polymer · doi:10.1016/j.polymer.2004.10.060 · Cited by 249
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Feedstocks for the Future – Biorefinery Production of Chemicals from Renewable Carbon
Bozell, J. J. (2008) · CLEAN – Soil, Air, Water · doi:10.1002/clen.200800100 · Cited by 216
Suyama, T., Tokiwa, Y., Ouichanpagdee, P., Kanagawa, T., & Kamagata, Y. (1998) · Applied and Environmental Microbiology · doi:10.1128/aem.64.12.5008-5011.1998 · Cited by 216
Assessment of aliphatic–aromatic copolyester biodegradable mulch films. Part I: Field study
Kijchavengkul, T., Auras, R., Rubino, M., Ngouajio, M., & Fernandez, R. T. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2007.10.074 · Cited by 213
Atmospheric and soil degradation of aliphatic–aromatic polyester films
Kijchavengkul, T., Auras, R., Rubino, M., Alvarado, E., Camacho Montero, J. R., & Rosales, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.048 · Cited by 209
Xanthan–alginate composite gel beads: Molecular interaction and in vitro characterization
PONGJANYAKUL, T., & PUTTIPIPATKHACHORN, S. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.09.011 · Cited by 200
Lu, Y., & Larock, R. C. (2007) · Biomacromolecules · doi:10.1021/bm700522z · Cited by 198
Vegetable oil‐based thermosetting polymers
Galià, M., de Espinosa, L. M., Ronda, J. C., Lligadas, G., & Cádiz, V. (2010) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.200900096 · Cited by 193
Biodegradation of poly(l-lactide)
Tokiwa, Y., & Jarerat, A. (2004) · Biotechnology Letters · doi:10.1023/b:bile.0000025927.31028.e3 · Cited by 191
Andjelkovic, D. D., Valverde, M., Henna, P., Li, F., & Larock, R. C. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.022 · Cited by 181
Fukushima, K., Tabuani, D., Dottori, M., Armentano, I., Kenny, J. M., & Camino, G. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.09.018 · Cited by 172
Laboratory composting of extruded poly(lactic acid) sheets
Ghorpade, V (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00077-8 · Cited by 169
Yeganeh, H., & Mehdizadeh, M. R. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2003.12.013 · Cited by 167
Rejinold, N. S., Chennazhi, K. P., Nair, S. V., Tamura, H., & Jayakumar, R. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.052 · Cited by 167
Selective degradation of biodegradable blends in simulated laboratory composting
Tabasi, R. Y., & Ajji, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.07.020 · Cited by 164
Li, S.-M., Jia, N., Ma, M.-G., Zhang, Z., Liu, Q.-H., & Sun, R.-C. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.060 · Cited by 164
de Mesquita, J. P., Donnici, C. L., Teixeira, I. F., & Pereira, F. V. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.025 · Cited by 154
A Review on Grafting of Biofibers for Biocomposites
Wei, L., & McDonald, A. G. (2016) · Materials · doi:10.3390/ma9040303 · Cited by 154
Ma, H., Zhou, B., Li, H., et al. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.050 · Cited by 149
Scarfato, P., Maio, L. D., & Incarnato, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42597 · Cited by 145
Stloukal, P., Pekařová, S., Kalendová, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S. C., Maier, G., Šlouf, M., et al. (2015) · Waste Management · doi:10.1016/j.wasman.2015.04.006 · Cited by 144
Biodegradable kinetics of plastics under controlled composting conditions
Leejarkpai, T., Suwanmanee, U., Rudeekit, Y., & Mungcharoen, T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.12.011 · Cited by 143
Synthesis and characterization of polyester resins based on Nahar seed oil
Dutta, N., Karak, N., & Dolui, S. K. (2004) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2003.09.005 · Cited by 134
Garrison, T. F., Kessler, M. R., & Larock, R. C. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.014 · Cited by 130
Self-citationRybak, A., & Meier, M. A. R. (2008) · ChemSusChem · doi:10.1002/cssc.200800047 · Cited by 129
Fatty Acid Profile and Biological Activities of Linseed and Rapeseed Oils
Lewińska, A., Żebrowski, J., Duda, M., Górka, A., & Wnuk, M. (2015) · Molecules · doi:10.3390/molecules201219887 · Cited by 129
Toughening of Polylactic Acid Nanocomposites: A Short Review
Balakrishnan, H., Hassan, A., Imran, M., & Wahit, M. U. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2011.618329 · Cited by 127
Biodegradation of poly(l-lactide) (PLA) exposed to UV irradiation by a mesophilic bacterium
Jeon, H. J., & Kim, M.-N. (2013) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2013.08.013 · Cited by 127
Kijchavengkul, T., Auras, R. A., Rubino, M. I., Ngouajio, M., & Fernandez, R. T. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.01.037 · Cited by 125
Wu, M., Xiong, Y. L., & Chen, J. (2011) · Meat Science · doi:10.1016/j.meatsci.2011.01.014 · Cited by 120
Kunioka, M., Ninomiya, F., & Funabashi, M. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.03.003 · Cited by 118
Unsaturated PA X,20 from Renewable Resources via Metathesis and Catalytic Amidation
Mutlu, H., & Meier, M. A. R. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900045 · Cited by 118
Morphological behaviour of poly(lactic acid) during hydrolytic degradation
Zhang, X., Espiritu, M., Bilyk, A., & Kurniawan, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.007 · Cited by 115
Quirino, R. L., Garrison, T. F., & Kessler, M. R. (2014) · Green Chemistry · doi:10.1039/c3gc41811a · Cited by 115
Self-citationYagi, H., Ninomiya, F., Funabashi, M., & Kunioka, M. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093824 · Cited by 112
Identification of important abiotic and biotic factors in the biodegradation of poly(l-lactic acid)
Husárová, L., Pekařová, S., Stloukal, P., Kucharzcyk, P., Verney, V., Commereuc, S., Ramoné, A., & Koutný, M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.04.050 · Cited by 110
N,N,N-trimethyl chitosan nanoparticles as a vitamin carrier system
de Britto, D., de Moura, M. R., Aouada, F. A., Mattoso, L. H. C., & ASSIS, O. B. G. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2011.09.002 · Cited by 108
Fukushima, K., Tabuani, D., Arena, M., Gennari, M., & Camino, G. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.01.003 · Cited by 106
Xia, Y., & Larock, R. C. (2010) · Polymer · doi:10.1016/j.polymer.2010.04.014 · Cited by 102
Polyester polyols and polyurethanes from ricinoleic acid
Petrovìć, Z. S., Cvetković, I., Hong, D., Wan, X., Zhang, W., Abraham, T., & Malsam, J. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27783 · Cited by 97
Stloukal, P., Kalendová, A., Mattausch, H., Laske, S., Holzer, C., & Koutný, M. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.10.015 · Cited by 93
Bio-based polymers, supercritical fluids and tissue engineering
Salerno, A., & Domingo, C. (2015) · Process Biochemistry · doi:10.1016/j.procbio.2015.02.009 · Cited by 92
Biodegradation of a synthetic co-polyester by aerobic mesophilic microorganisms
Tan, F. T., Cooper, D. G., Marić, M., & Nicell, J. A. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.005 · Cited by 89
Yang, Z., Wang, W., Shao, Z., Zhu, H., Li, Y., & Wang, F. (2012) · Cellulose · doi:10.1007/s10570-012-9796-z · Cited by 85
Fatty Acid Based Biodegradable Polymer
Jain, J. P., Sokolsky‐Papkov, M., Kumar, N., & Domb, A. J. (2008) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720701834232 · Cited by 81
Stloukal, P., Verney, V., Commereuc, S., Rychlý, J., Matisová-Rychlá, L., Piš, V., & Koutný, M. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.03.072 · Cited by 81
Sikorska, W., Musioł, M., Nowak, B., Pajak, J., Łabużek, S., Kowalczuk, M. M., & Adamus, G. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.03.021 · Cited by 79
Çakmaklı, B., Hazer, B., Tekin, İ. Ö., & Cömert, F. (2005) · Biomacromolecules · doi:10.1021/bm050063f · Cited by 75
Yagi, H., Ninomiya, F., Funabashi, M., & Kunioka, M. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.05.012 · Cited by 74
Cationic Ring-Opening Polymerization
Penczek, S., Kubisa, P., & Matyjaszewski, K. A. (1985) · Advances in polymer science · doi:10.1007/3-540-13781-5 · Cited by 73
Biodegradable Shape Memory Polymeric Material from Epoxidized Soybean Oil and Polycaprolactone
Tsujimoto, T., Takayama, T., & Uyama, H. (2015) · Polymers · doi:10.3390/polym7101506 · Cited by 71
Acyclic Triene Metathesis Oligo‐ and Polymerization of High Oleic Sun Flower Oil
Biermann, U., Metzger, J. O., & Meier, M. A. R. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900615 · Cited by 71
Biodegradability study of polylactic acid/ thermoplastic polyurethane blends
Jašo, V., Glenn, G. M., Klamczynski, A. K., & Petrovìć, Z. S. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.07.011 · Cited by 69
Pivsa‐Art, W., Chaiyasat, A., Pivsa‐Art, S., Yamane, H., & Ohara, H. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.784 · Cited by 68
Henna, P. H., Kessler, M. R., & Larock, R. C. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800202 · Cited by 64
Aqueous Cationic Polyurethane Dispersions from Vegetable Oils
Lu, Y., & Larock, R. C. (2010) · ChemSusChem · doi:10.1002/cssc.200900251 · Cited by 58
Valverde, M., Andjelkovic, D. D., Kundu, P. P., & Larock, R. C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27080 · Cited by 57
Esters of calendula oil and tung oil as reactive diluents for alkyd resins
Biermann, U., Butte, W., Holtgrefe, R., Feder, W., & Metzger, J. O. (2010) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.200900142 · Cited by 56
dos Santos, M. L., & de Magalhães, G. C. (1999) · Journal of the Brazilian Chemical Society · doi:10.1590/s0103-50531999000100003 · Cited by 51
Bio-based Polymers and Materials
Berezina, N., & Martelli, S. M. (2014) · Royal Society of Chemistry eBooks · doi:10.1039/9781782620181-00001 · Cited by 43
Garrison, T. F., Zhang, Z., Kim, H. J., Mitra, D., Xia, Y., Pfister, D. P., Brehm‐Stecher, B. F., Larock, R. C., & Kessler, M. R. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300423 · Cited by 43
Self-citationA novel enzymatic biodegradable route for PLA/EVA blends under agricultural soil of Vietnam
Công, Đ. V., Hoàng, T., Giang, N. V., Hà, N. N., Лам, Т. Д., & Sumita, M. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.12.012 · Cited by 43
Lai, S., Sun, W., & Don, T. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24071 · Cited by 36
Yamano, N., Kawasaki, N., Oshima, M., & Nakayama, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.06.011 · Cited by 32
Kucharczyk, P., Hnátková, E., ZdenekDvorak, & Sedlařík, V. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.10.016 · Cited by 32
Kasemsiri, P., Hızıroǧlu, S., & Rimdusit, S. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.06.011 · Cited by 32
Prospective materials for biodegradable and/or biobased pressure-sensitive adhesives: a review
Cohen, E., Binshtok, O., Dotan, A. L., & Dodiuk, H. (2012) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2012.696901 · Cited by 29
Beran, E., Hull, S., & Steininger, M. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0445-2 · Cited by 27
Biosynthesis of Natural-Synthetic Hybrid Copolymers: Polyhydroxyoctanoate−Diethylene Glycol
Sanguanchaipaiwong, V., Gabelish, C. L., Hook, J. M., Scholz, C., & Foster, L. J. R. (2004) · Biomacromolecules · doi:10.1021/bm0344708 · Cited by 26
Controlled release of 4‐hydroperoxycyclophosphamide from the fatty acid dimer‐sebacic acid copolymer
Buahin, K. G., Judy, K. D., Hartke, C., Domb, A. J., Maniar, M. L., Colvin, O. M., & Brem, H. (1992) · Polymers for Advanced Technologies · doi:10.1002/pat.1992.220030605 · Cited by 26
Ohkawa, K., Shoumura, K., YAMADA, M., Nishida, A., Shirai, H., & Yamamoto, H. (2001) · Macromolecular Bioscience · doi:10.1002/1616-5195(20010601)1:4<136::aid-mabi136>3.0.co;2-3 · Cited by 26
Industrial vegetable oil by-products increase the ductility of polylactide
Ruellan, A., Guinault, A., Sollogoub, C., Chollet, G., Ait-Mada, A., Ducruet, V., & Domenek, S. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.98 · Cited by 24
Optimization of electrically conductive films: Poly(3-methylthiophene) or polypyrrole in Kapton
Meador, M. A. B., Hardy-Green, D., Auping, J. V., Gaier, J. R., Ferrara, L. A., Papadopoulos, D. S., Smith, J. W., & Keller, D. J. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970214)63:7<855::aid-app5>3.0.co;2-p · Cited by 21
Composite biodegradable materials based on polyhydroxyalkanoate
Gogotov, I. N., Герасин, В. А., Князев, Я. В., Antipov, E. M., & Barazov, S. K. (2010) · Applied Biochemistry and Microbiology · doi:10.1134/s0003683810060086 · Cited by 20
Seed Oil Based Zinc Bioactive Polymers: Synthesis, Characterization and Biological Studies
Bharathi, N. P., Khan, N. U., Shreaz, S., & Hashmi, A. A. (2009) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-009-9299-z · Cited by 19
Genovese, L., Lotti, N., Gazzano, M., Finelli, L., & Munari, A. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.88 · Cited by 18
Vegetable Oils in Paint and Coatings
Mark, M. R. V. D., & Sandefur, K. D. (2005) · AOCS Publishing eBooks · doi:10.1201/9781439822388.ch8 · Cited by 16
Gleadall, A., Pan, J., & Kruft, M.-A. B. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.07.010 · Cited by 15
Prado, A. G. S., Santos, A. L. F., Nunes, A. R., Tavares, G. W., & Almeida, C. M. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.02.036 · Cited by 12
Lightweight Materials from Biofibers and Biopolymers
Zhang, D. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch001 · Cited by 12
Current Status & Future perspective of Research & Development on Bio-Based Polymers
Uyama, H. (2013) · International Polymer Science and Technology · doi:10.1177/0307174x1304001115 · Cited by 3
Current Status and Future Perspective of Research and Development on Bio-based Polymers
Uyama, H. (2013) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.86.161 · Cited by 2
Tsuji (2000) · doi:10.1002/1097-4628(20000815)77:7
Cited by
Zhou, J., Gui, H., Banfield, C. C., Wen, Y., Zang, H., Dippold, M. A., Charlton, A., & Jones, D. L. (2021) · Soil Biology and Biochemistry · doi:10.1016/j.soilbio.2021.108211 · Cited by 630
Biodegradation of Wasted Bioplastics in Natural and Industrial Environments: A Review
Folino, A., Karageorgiou, A., Calabrò, P. S., & Komilis, D. (2020) · Sustainability · doi:10.3390/su12156030 · Cited by 489
Innovations in applications and prospects of bioplastics and biopolymers: a review
Nanda, S., Patra, B. R., Patel, R., Bakos, J., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01334-4 · Cited by 478
Future opportunities for bio-based adhesives – advantages beyond renewability
Heinrich, L. A. (2019) · Green Chemistry · doi:10.1039/c8gc03746a · Cited by 405
Microbial Degradation of Synthetic Biopolymers Waste
Siracusa, V. (2019) · Polymers · doi:10.3390/polym11061066 · Cited by 292
Metadata
- Authors
- Garrison, T., Murawski, A., & Quirino, R.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2016-07-14
- Volume
- 8
- Issue
- 7
- Pages
- 262
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2462313124
- Cited by
- 319
- References
- 143
- FWCI
- 6.89
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.