CoChat
Sign Up
Cited by 117SARS-CoV-2 and COVID-19 ResearchSARS-CoV-2 detection and testingAnimal Virus Infections Studies

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Comparison of Four SARS-CoV-2 Neutralization Assays

Open access
Riepler, Lydia, Rössler, Annika, Falch, Albert, Volland, André, Borena, Wegene, von Laer, Dorothee, Kimpel, Janine·2020·Vaccines
DOI 10.3390/vaccines9010013PMC PMC7824240
Open this paper in CoChat — free accountOpen PDF

Abstract

Neutralizing antibodies are a major correlate of protection for many viruses including the novel coronavirus SARS-CoV-2. Thus, vaccine candidates should potently induce neutralizing antibodies to render effective protection from infection. A variety of in vitro assays for the detection of SARS-CoV-2 neutralizing antibodies has been described. However, validation of the different assays against each other is important to allow comparison of different studies. Here, we compared four different SARS-CoV-2 neutralization assays using the same set of patient samples. Two assays used replication competent SARS-CoV-2, a focus forming assay and a TCID50-based assay, while the other two assays used replication defective lentiviral or vesicular stomatitis virus (VSV)-based particles pseudotyped with SARS-CoV-2 spike. All assays were robust and produced highly reproducible neutralization titers. Titers of neutralizing antibodies correlated well between the different assays and with the titers of SARS-CoV-2 S-protein binding antibodies detected in an ELISA. Our study showed that commonly used SARS-CoV-2 neutralization assays are robust and that results obtained with different assays are comparable.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/vaccines9010013

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Focus forming neutralization assay. (a) Vero-TMPRSS2 cells were infected with replication competent SARS-CoV-2 virus, fixed after indicated incubation times and stained with the serum of a SARS-CoV-2 convalescent patient. Representative microscopic pictures are shown. (b) Neutralization titers for a set of 11 samples were determined using replication competent SARS-CoV-2 in a focus forming assay. Cells were fixed and stained after 10 h incubation and neutralization titers were determined using ImmunoSpot S6 Ultra-V reader and CTL analyzer BioSpot® 5.0 software (CTL Europe GmbH, Bonn, Germany). The data presented are the result of three independent experiments. Each experiment is represented by a different symbol. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative. (c) Low interassay variability and high reproducibility of the assay was demonstrated by analyzing neutralization titers of a positive control (P3, 1:64 dilution) in 18 independent experiment. Percent neutralization was calculated relative to virus only wells. Shown are individual replicates and mean.
Figure 1 Focus forming neutralization assay. (a) Vero-TMPRSS2 cells were infected with replication competent SARS-CoV-2 virus, fixed after indicated incubation times and stained with the serum of a SARS-CoV-2 convalescent patient. Representative microscopic pictures are shown. (b) Neutralization titers for a set of 11 samples were determined using replication competent SARS-CoV-2 in a focus forming assay. Cells were fixed and stained after 10 h incubation and neutralization titers were determined using ImmunoSpot S6 Ultra-V reader and CTL analyzer BioSpot® 5.0 software (CTL Europe GmbH, Bonn, Germany). The data presented are the result of three independent experiments. Each experiment is represented by a different symbol. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative. (c) Low interassay variability and high reproducibility of the assay was demonstrated by analyzing neutralization titers of a positive control (P3, 1:64 dilution) in 18 independent experiment. Percent neutralization was calculated relative to virus only wells. Shown are individual replicates and mean.CC BY · PubMed Central
Figure 2 TCID50 neutralization assay. (a) Parental Vero cells, Vero cells expressing TMPRSS2, or Vero cells expressing TMPRSS2 and ACE2 were infected with serial dilutions of SARS-CoV-2. A total of 48 h after infection CPE was analyzed under the microscope and representative microscopic pictures are shown. Additionally, cells were fixed and stained with the serum of a SARS-CoV-2 convalescent patient. Upper panel: noninfected cells; middle panel: immunostaining (10−1 dilution for Vero and Vero-TMPRSS2 cells, 10−5 dilution for Vero-TMPRSS2/ACE2 cells); lower panel: higher magnification of middle panel to evaluate CPE. (b) Neutralization titers for a set of 11 samples were determined using replication competent SARS-CoV-2 in a TCID50 assay. Neutralization titers of three independent experiments are displayed with different symbols. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative.
Figure 2 TCID50 neutralization assay. (a) Parental Vero cells, Vero cells expressing TMPRSS2, or Vero cells expressing TMPRSS2 and ACE2 were infected with serial dilutions of SARS-CoV-2. A total of 48 h after infection CPE was analyzed under the microscope and representative microscopic pictures are shown. Additionally, cells were fixed and stained with the serum of a SARS-CoV-2 convalescent patient. Upper panel: noninfected cells; middle panel: immunostaining (10−1 dilution for Vero and Vero-TMPRSS2 cells, 10−5 dilution for Vero-TMPRSS2/ACE2 cells); lower panel: higher magnification of middle panel to evaluate CPE. (b) Neutralization titers for a set of 11 samples were determined using replication competent SARS-CoV-2 in a TCID50 assay. Neutralization titers of three independent experiments are displayed with different symbols. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative.CC BY · PubMed Central
Figure 3 Vesicular stomatitis virus (VSV)-based neutralization assay. (a) VSVΔG-GFP-S particles were titrated on parental 293T, BHK21, and Vero cells or on cell lines with stable ACE2 overexpression. For 293T and BHK-21 cells two different lentiviral vectors were used for ACE2 overexpression, either with a blasticinin resistance (B) or a hygromycin resistance cassette (H). A total of 16 h after infection, the number of GFP positive cells was determined using an immunospot reader. Shown are mean ± SEM of duplicate samples from one representative of two independent experiments. (b) Neutralization titers for a set of 11 samples were determined using a GFP encoding VSVΔG-S variant. Each sample was analyzed in four independent experiments. Each experiment is represented by a different symbol. Neutralization titers ≤ 1:4 are regarded negative. (c) A positive control (P3 in a 1:64 dilution) was analyzed using the VSVΔG-GFP-S virus on 66 independent plates. Percent neutralization was calculated relative to virus only wells. Shown are individual replicates and mean. (d) Neutralization titers for a set of 11 samples were determined using a luciferase encoding VSVΔG-S variant. Each sample was analyzed in three independent experiments. Each experiment is represented by a different symbol. Dotted line in b + d indicate threshold for neutralizing antibody titers, i.e., titers ≤ 1:4 are regarded as negative. Dotted line in c indicates 50% neutralization.
Figure 3 Vesicular stomatitis virus (VSV)-based neutralization assay. (a) VSVΔG-GFP-S particles were titrated on parental 293T, BHK21, and Vero cells or on cell lines with stable ACE2 overexpression. For 293T and BHK-21 cells two different lentiviral vectors were used for ACE2 overexpression, either with a blasticinin resistance (B) or a hygromycin resistance cassette (H). A total of 16 h after infection, the number of GFP positive cells was determined using an immunospot reader. Shown are mean ± SEM of duplicate samples from one representative of two independent experiments. (b) Neutralization titers for a set of 11 samples were determined using a GFP encoding VSVΔG-S variant. Each sample was analyzed in four independent experiments. Each experiment is represented by a different symbol. Neutralization titers ≤ 1:4 are regarded negative. (c) A positive control (P3 in a 1:64 dilution) was analyzed using the VSVΔG-GFP-S virus on 66 independent plates. Percent neutralization was calculated relative to virus only wells. Shown are individual replicates and mean. (d) Neutralization titers for a set of 11 samples were determined using a luciferase encoding VSVΔG-S variant. Each sample was analyzed in three independent experiments. Each experiment is represented by a different symbol. Dotted line in b + d indicate threshold for neutralizing antibody titers, i.e., titers ≤ 1:4 are regarded as negative. Dotted line in c indicates 50% neutralization.CC BY · PubMed Central
Figure 4 Lentiviral particle-based neutralization assay. Lentiviral particles encoding GFP were pseudotyped with SARS-CoV-2 S. Neutralization titers for a set of 11 samples were determined. Each sample was analyzed in three independent experiments. Each experiment is represented by a different symbol. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative.
Figure 4 Lentiviral particle-based neutralization assay. Lentiviral particles encoding GFP were pseudotyped with SARS-CoV-2 S. Neutralization titers for a set of 11 samples were determined. Each sample was analyzed in three independent experiments. Each experiment is represented by a different symbol. Dotted line indicates detection limit for the assay; titers ≤ 1:4 were regarded as negative.CC BY · PubMed Central
Figure 5 Neutralization titers for the different assays correlate well with each other and with binding antibody titers. For neutralization assays mean neutralizing titers of three (focus forming, TCID50, and lentiviral particle assay) or four independent experiments (VSV assay) were calculated. (a) Correlation of neutralizing antibody titers and binding antibodies (anti-S IgA, anti-S IgG, and anti-N IgG) were determined. (b) Neutralizing antibody titers determined in each assay were correlated to titers in all three other neutralizing antibody assays. Dotted lines indicate detection limit for the different assays; neutralization assay ≤ 1:4 negative, anti-S IgA and anti-S IgG OD < 0.8 negative, OD 0.8–1.1 borderline, OD > 1.1 positive, anti-N IgG RLU > 1.4 positive. Some of the dots in the blots represent multiple samples.
Figure 5 Neutralization titers for the different assays correlate well with each other and with binding antibody titers. For neutralization assays mean neutralizing titers of three (focus forming, TCID50, and lentiviral particle assay) or four independent experiments (VSV assay) were calculated. (a) Correlation of neutralizing antibody titers and binding antibodies (anti-S IgA, anti-S IgG, and anti-N IgG) were determined. (b) Neutralizing antibody titers determined in each assay were correlated to titers in all three other neutralizing antibody assays. Dotted lines indicate detection limit for the different assays; neutralization assay ≤ 1:4 negative, anti-S IgA and anti-S IgG OD < 0.8 negative, OD 0.8–1.1 borderline, OD > 1.1 positive, anti-N IgG RLU > 1.4 positive. Some of the dots in the blots represent multiple samples.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 26 references

Cited by

Sorted by citations

Related

See all

Metadata

Authors
Riepler, L., Rössler, A., Falch, A., Volland, A., Borena, W., von Laer, D., & Kimpel, J.
Affiliations
  • Innsbruck Medical University (AT)
  • Department of Hygiene, Microbiology and Public Health, Institute of Virology, Medical University of Innsbruck, 6020 Innsbruck, Austria
Corresponding author
Kimpel, Janine
ORCID
Venue
Vaccines
Publisher
MDPI AG
Published
2020-12-28
Volume
9
Issue
1
Pages
13
ISSN
2076-393X (ISSN-L)
DOI
10.3390/vaccines9010013
PMC
PMC7824240
OpenAlex
W3114250596
Cited by
117
References
26
Citations by year
2026: 2 · 2025: 10 · 2024: 17 · 2023: 19 · 2022: 37 · 2021: 32
FWCI
2.89
Type
journal article
Language
en
Open access
Licence
Locations
  • Vaccines (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Health Sciences › Medicine › Infectious Diseases › SARS-CoV-2 and COVID-19 Research
  • Health Sciences › Medicine › Infectious Diseases › SARS-CoV-2 detection and testing
  • Life Sciences › Agricultural and Biological Sciences › Animal Science and Zoology › Animal Virus Infections Studies
Keywords
SARS-CoV-2, neutralizing antibodies, assay validation, TCID50, vaccine-induced immunity, assay reproducibility

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review