The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Abstract
Lithium metal is considered a “Holy Grail” of anode materials for high‐energy‐density batteries. However, both dendritic lithium deposition and infinity dimension change during long‐term cycling have extremely restricted its practical applications for energy storage devices. Here, a thermal infusion strategy for prestoring lithium into a stable nickel foam host is demonstrated and a composite anode is achieved. In comparison with the bare lithium, the composite anode exhibits stable voltage profiles (200 mV at 5.0 mA cm−2) with a small hysteresis beyond 100 cycles in carbonate‐based electrolyte, as well as high rate capability, significantly reduced interfacial resistance, and small polarization in a full‐cell battery with Li 4 Ti 5 O 12 or LiFePO 4 as counter electrode. More importantly, in addition to the fact that lithium is successfully confined in the metallic nickel foam host, uniform lithium plating/stripping is achieved with a low dimension change (merely ≈3.1%) and effective inhibition of dendrite formation. The mechanism for uniform lithium stripping/plating behavior is explained based on a surface energy model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Self-citationA Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Self-citationInterconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Self-citationStable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Self-citationChemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Liang, Z., Lin, D., Zhao, J., Lu, Z., Liu, Y., Liu, C., Lu, Y., Wang, H., Yan, K., Tao, X., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518188113 · Cited by 846
Self-citationElectrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Self-citationAnodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles
Choudhury, S., Mangal, R., Agrawal, A., & Archer, L. A. (2015) · Nature Communications · doi:10.1038/ncomms10101 · Cited by 450
Defect-induced plating of lithium metal within porous graphene networks
Mukherjee, R., Thomas, A. V., Datta, D., Singh, E., Li, J., Eksik, O., Shenoy, V. B., & Koratkar, N. (2014) · Nature Communications · doi:10.1038/ncomms4710 · Cited by 436
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Effect of vinylene carbonate as additive to electrolyte for lithium metal anode
Ota, H., Shima, K., Ue, M., & Yamaki, J.-I. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.09.010 · Cited by 382
Stable Cycling of Lithium Metal Batteries Using High Transference Number Electrolytes
Lu, Y., Tikekar, M., Mohanty, R., Hendrickson, K., Ma, L., & Archer, L. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402073 · Cited by 377
Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure
Zhang, Y., Qian, J., Xu, W., Russell, S. M., Chen, X., Nasybulin, E., Bhattacharya, P., Engelhard, M. H., Mei, D., Cao, R., et al. (2014) · Nano Letters · doi:10.1021/nl5039117 · Cited by 365
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Self-citationAurbach, D., Gofer, Y., & Langzam, J. (1989) · Journal of The Electrochemical Society · doi:10.1149/1.2096425 · Cited by 313
Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
Li, N., Yin, Y., Li, J., Zhang, C., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600400 · Cited by 273
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationCoated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Xie, K., Wei, W., Yuan, K., Lu, W., Guo, M., Li, Z., Song, Q., Liu, X., Wang, J.-G., & Shen, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09031 · Cited by 158
Wu, F., Tan, G., Chen, R., Li, L., Xiang, J., & Zheng, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103161 · Cited by 123
Lithium Metal Anodes and Rechargeable Lithium Metal Batteries
Zhang, J.-G., Xu, W., & Henderson, W. A. (2017) · Springer Series in Materials Science · doi:10.1007/978-3-319-44054-5 · Cited by 119
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationKang, L., Cui, M., Jiang, F., Gao, Y., Luo, H., Liu, J., Liang, W., & Zhi, C. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801090 · Cited by 1,245
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Self-citationSodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Metadata
- Authors
- Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-05-02
- Volume
- 27
- Issue
- 24
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2611361362
- Cited by
- 846
- References
- 47
- FWCI
- 44.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.