The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Hydrothermal and Pyrolytic Conversion of Biomasses into Catalysts for Advanced Oxidation Treatments
Abstract
Biomasses are very important natural products. Transferring biomass into catalysts for the advanced oxidation process (AOP) via heat treatment has attracted extensive attention. This review systematically introduces and summarizes two kinds of innovative biomass‐based catalysts according to the treating temperature. At low temperature (<300 °C), biomasses are converted into hydrothermal carbonation carbon (HTCC) with semiconductive properties for photocatalysis application. At high temperature (>300 °C), by contrast, the products lose their semiconductive nature and become a conductive carbon‐based conductor (biochar). They usually work as AOP catalysts by activating oxidant of O 2, H 2 O 2, and peroxysulfate for environmental treatment. This review summarizes and compares HTCC and biochar according to their formation process, structure, catalytic mechanism, and key points for the activity enhancement. The active units in HTCC are the sp 2‐hybridized polyfuran unit while those in biochar are the persistent free radicals, nitrogen‐containing unit, or defects. HTCC converts water into OH radicals by using the photoexcited electron/hole pairs induced by solar illumination, while biochar activates oxidants via the active unit on its surface. More importantly, this review summarizes and demonstrates the key points to obtain high‐efficiency HTCC and biochar catalysts. Finally, conclusions are drawn and the future aspects for biomass‐based catalysis are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Wang, T., Zhai, Y., Zhu, Y., Li, C., & Zeng, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.071 · Cited by 1,365
Metal-Free Carbocatalysis in Advanced Oxidation Reactions
Duan, X., Sun, H., & Wang, S. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00535 · Cited by 1,329
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Zhu, S., Huang, X., Ma, F., Wang, L., Duan, X., & Wang, S. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01817 · Cited by 1,179
Yun, E.-T., Lee, J. H., Kim, J., Park, H.-D., & Lee, J. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00959 · Cited by 1,175
Compositions and sorptive properties of crop residue-derived chars
Chun, Y., Sheng, G., Chiou, C. T., & Xing, B. (2004) · Environmental Science & Technology · doi:10.1021/es035034w · Cited by 1,079
Fang, G., Liu, C., Gao, J., Dionysiou, D. D., & Zhou, D. (2015) · Environmental Science & Technology · doi:10.1021/es5061512 · Cited by 887
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Tang, L., Liu, Y., Wang, J., Zeng, G., Deng, Y., Dong, H., Feng, H., Wang, J., & Peng, B. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.02.059 · Cited by 827
Fang, G., Gao, J., Liu, C., Dionysiou, D. D., Wang, Y., & Zhou, D. (2014) · Environmental Science & Technology · doi:10.1021/es4048126 · Cited by 802
Qambrani, N. A., Rahman, M. M., Won, S., Shim, S., & Ra, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.057 · Cited by 774
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
A review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730
Reduced Graphene Oxide for Catalytic Oxidation of Aqueous Organic Pollutants
Sun, H., Liu, S., Zhou, G., Ang, H. M., Tadé, M. O., & Wang, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301372d · Cited by 722
Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass
Liu, Z., & Zhang, F.-S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.085 · Cited by 710
Kinetic and adsorptive characterization of biochar in metal ions removal
Kołodyńska, D., Wnętrzak, R., Leahy, J. J., Hayes, M. H. B., Kwapiński, W., & Hubicki, Z. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.025 · Cited by 683
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Li, Y., Xing, B., Ding, Y., Han, X., & Wang, S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123614 · Cited by 576
Unveiling the active sites of graphene-catalyzed peroxymonosulfate activation
Duan, X., Sun, H., Ao, Z., Zhou, L., Wang, G., & Wang, S. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.016 · Cited by 498
Vardon, D. R., Sharma, B. K., Blazina, G. V., Rajagopalan, K., & Strathmann, T. J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.01.008 · Cited by 452
Rong, X., Xie, M., Kong, L., Natarajan, V., Ma, L., & Zhan, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.135 · Cited by 390
Liu, J., Jiang, J., Meng, Y., Aihemaiti, A., Xu, Y., Xiang, H., Gao, Y., & Chen, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122026 · Cited by 356
Sun, C., Chen, T., Huang, Q., Zhan, M., Li, X., & Yan, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122519 · Cited by 329
Environmentally Persistent Free Radicals and Their Lifetimes in PM 2.5
Gehling, W., & Dellinger, B. (2013) · Environmental Science & Technology · doi:10.1021/es401767m · Cited by 278
Biochar based catalysts for the abatement of emerging pollutants: a review
Do Minh, T., Song, J., Deb, A., Cha, L., Srivastava, V., & Sillanpää, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124856 · Cited by 231
Rodríguez Correa, C., Stollovsky, M., Hehr, T., Rauscher, Y., Rolli, B., & Kruse, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01895 · Cited by 199
Structural and morphological changes in kraft lignin during hydrothermal carbonization
Wikberg, H., Ohra-aho, T., Pileidis, F., & Titirici, M.-M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00925 · Cited by 175
Pivotal Roles of Metal Oxides in the Formation of Environmentally Persistent Free Radicals
Yang, L., Liu, G., Zheng, M., Jin, R., Zhao, Y., Wu, X., & Xu, Y. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03583 · Cited by 152
Yang, J., Pignatello, J. J., Pan, B., & Xing, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b01087 · Cited by 144
Taskin, E., de Castro Bueno, C., Allegretta, I., Terzano, R., Rosa, A. H., & Loffredo, E. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.05.204 · Cited by 138
Qin, L., Wu, Y., Hou, Z., & Jiang, E. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123682 · Cited by 131
Chemical characterization of char derived from slow pyrolysis of microalgal residue
Chang, Y.-M., Tsai, W.-T., & Li, M.-H. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.12.004 · Cited by 109
Cited by
Zhou, X., Zhu, Y., Niu, Q., Zeng, G., Lai, C., Liu, S., Huang, D., Qin, L., Liu, X., Li, B., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129027 · Cited by 319
Application of Biochar-Based Materials for Effective Pollutant Removal in Wastewater Treatment
Han, M., Liu, Z., Huang, S., Zhang, H., Yang, H., Liu, Y., Zhang, K., & Zeng, Y. (2024) · Nanomaterials · doi:10.3390/nano14231933 · Cited by 37
Metadata
- Authors
- He, X., Zheng, N., Hu, R., Hu, Z., & Yu, J. C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-10-19
- Volume
- 31
- Issue
- 7
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3092738868
- Cited by
- 171
- References
- 38
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.