The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Abstract
Bioprinting is an emerging technology that allows the assembling of both living and non‐living biological materials into an ideal complex layout for further tissue maturation. Bioprinting aims to produce engineered tissue or organ in a mechanized, organized, and optimized manner. Various biomaterials and techniques have been utilized to bioprint biological constructs in different shapes, sizes and resolutions. There is a need to systematically discuss and analyze the reported strategies employed to fabricate these constructs. We identified and discussed important design factors in bioprinting, namely shape and resolution, material heterogeneity, and cellular‐material remodeling dynamism. Each design factors are represented by the corresponding process capabilities and printing parameters. The process‐design map will inspire future biomaterials research in these aspects. Design considerations such as data processing, bio‐ink formulation and process selection are discussed. Various printing and crosslinking strategies, with relevant applications, are also systematically reviewed. We categorized them into 5 general bioprinting strategies, including direct bioprinting, in‐process crosslinking, post‐process crosslinking, indirect bioprinting and hybrid bioprinting. The opportunities and outlook in 3D bioprinting are highlighted. This review article will serve as a framework to advance computer‐aided design in bioprinting technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
The role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Vascularization Strategies for Tissue Engineering
Lovett, M., Lee, K., Edwards, A., & Kaplan, D. L. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0085 · Cited by 923
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Nanowired three-dimensional cardiac patches
Dvir, T., Timko, B. P., Brigham, M. D., Naik, S. R., Karajanagi, S. S., Levy, O., Jin, H., Parker, K. K., Langer, R., & Kohane, D. S. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.160 · Cited by 760
Nanoliter-scale synthesis of arrayed biomaterials and application to human embryonic stem cells
Anderson, D. G., Levenberg, S., & Langer, R. (2004) · Nature Biotechnology · doi:10.1038/nbt981 · Cited by 747
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Co-culture systems and technologies: taking synthetic biology to the next level
Goers, L., Freemont, P., & Polizzi, K. M. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0065 · Cited by 630
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
Bioprinting for stem cell research
Tasoglu, S., & Demirci, U. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.10.005 · Cited by 422
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Self-citationBio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Self-citationA 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Bioprinting for cancer research
Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
Self-citationFinite element study of scaffold architecture design and culture conditions for tissue engineering
Olivares, A. L., Marsal, È., Planell, J. A., & Lacroix, D. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.041 · Cited by 339
Single cell epitaxy by acoustic picolitre droplets
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b704965j · Cited by 326
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Gupta, D., Venugopal, J., Mitra, S., Giri Dev, V. R., & Ramakrishna, S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.079 · Cited by 317
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
Itoh, M., Nakayama, K., Noguchi, R., Kamohara, K., Furukawa, K., Uchihashi, K., Toda, S., Oyama, J.-I., Node, K., & Morita, S. (2015) · PLOS ONE · doi:10.1371/journal.pone.0136681 · Cited by 299
Laser-guided direct writing of living cells
Odde, D. J., & Renn, M. J. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(20000205)67:3<312::aid-bit7>3.0.co;2-f · Cited by 297
Jayasinghe, S. N., Qureshi, A., & Eagles, P. A. M. (2005) · Small · doi:10.1002/smll.200500291 · Cited by 286
DNA-directed self-assembly of shape-controlled hydrogels
Qi, H., Ghodousi, M., Du, Y., Grun, C., Bae, H., Yin, P., & Khademhosseini, A. (2013) · Nature Communications · doi:10.1038/ncomms3275 · Cited by 280
Shim, J.-H., Kim, J. Y., Park, M., Park, J., & Cho, D.-W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034102 · Cited by 268
Laser‐guided direct writing for three‐dimensional tissue engineering
Nahmias, Y., Schwartz, R. E., Verfaillie, C. M., & Odde, D. J. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20585 · Cited by 264
Biomimetic gradient hydrogels for tissue engineering
Sant, S., Hancock, M. J., Donnelly, J. P., Iyer, D., & Khademhosseini, A. (2010) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20411 · Cited by 253
Programmed synthesis of three-dimensional tissues
Todhunter, M. E., Jee, N. Y., Hughes, A. J., Coyle, M. C., Cerchiari, A., Farlow, J., Garbe, J. C., LaBarge, M. A., Desai, T. A., & Gartner, Z. J. (2015) · Nature Methods · doi:10.1038/nmeth.3553 · Cited by 247
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Busilacchi, A., Gigante, A., Mattioli-Belmonte, M., Manzotti, S., & Muzzarelli, R. A. A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.06.044 · Cited by 223
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Self-citationSnyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
Advances in smart materials: Stimuli‐responsive hydrogel thin films
White, E. M., Yatvin, J., Grubbs, J. B., Bilbrey, J. A., & Locklin, J. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23312 · Cited by 187
Development of ‘Multi-arm Bioprinter’ for hybrid biofabrication of tissue engineering constructs
Ozbolat, I. T., Chen, H., & Yu, Y. (2014) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.10.005 · Cited by 182
Smart hydrogels for 3D bioprinting
Wang, S., Lee, J. M., & Yeong, W. Y. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.005 · Cited by 181
Self-citationGurkan, U. A., El Assal, R., Yildiz, S. E., Sung, Y., Trachtenberg, A. J., Kuo, W. P., & Demirci, U. (2014) · Molecular Pharmaceutics · doi:10.1021/mp400573g · Cited by 178
Flexible Fabrication of Biomimetic Bamboo‐Like Hybrid Microfibers
Yu, Y., Wen, H., Ma, J., Lykkemark, S., Xu, H., & Qin, J. (2014) · Advanced Materials · doi:10.1002/adma.201304974 · Cited by 172
Three-dimensional inkjet biofabrication based on designed images
Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., & Nakamura, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034113 · Cited by 167
3D bioprinting of biomimetic aortic vascular constructs with self‐supporting cells
Kucukgul, C., Ozler, S. B., Inci, I., Karakas, E., Irmak, S., Gozuacik, D., Taralp, A., & Koc, B. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25493 · Cited by 161
Jana, S., & Lerman, A. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.07.006 · Cited by 160
Characterization and evaluation of 3D printed microfluidic chip for cell processing
Lee, J. M., Zhang, M., & Yeong, W. Y. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1688-8 · Cited by 147
Self-citationFang, Y., Frampton, J. P., Raghavan, S. A., Sabahi‐Kaviani, R., Luker, G. D., Deng, C. X., & Takayama, S. (2012) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0709 · Cited by 145
Lee, S., Kim, H., Won, D., Lee, J., & Kim, J. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1676-z · Cited by 144
Self-citationPrinting cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking
Irvine, S. A., Agrawal, A., Lee, B. H., Chua, H. Y., Low, K. Y., Lau, B. C., Machluf, M., & Venkatraman, S. S. (2015) · Biomedical Microdevices · doi:10.1007/s10544-014-9915-8 · Cited by 136
Nahmias, Y., & Odde, D. J. (2006) · Nature Protocols · doi:10.1038/nprot.2006.386 · Cited by 134
Ma, Y., Ji, Y., Huang, G., Ling, K., Zhang, X., & Xu, F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044105 · Cited by 130
Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells
Fedorovich, N. E., Wijnberg, H. M., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0019 · Cited by 128
Gelatin-Based Laser Direct-Write Technique for the Precise Spatial Patterning of Cells
Schiele, N. R., Chrisey, D. B., & Corr, D. T. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0442 · Cited by 112
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 112
Huang, Y., He, K., & Wang, X. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.03.048 · Cited by 90
Ultrananocrystalline diamond-CMOS device integration route for high acuity retinal prostheses
Ahnood, A., Escudie, M., Cicione, R., Abeyrathne, C. D., Ganesan, K., Fox, K. E., Garrett, D. J., Stacey, A. D., Apollo, N. V., Lichter, S. G., et al. (2015) · Biomedical Microdevices · doi:10.1007/s10544-015-9952-y · Cited by 89
Tan, E. Y. S., & Yeong, W. Y. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.003 · Cited by 85
Self-citationMiller, E. D., Li, K., Takeo Kanade, A., Weiss, L. E., Walker, L. M., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.005 · Cited by 82
An Electrohydrodynamic Bioprinter for Alginate Hydrogels Containing Living Cells
Gasperini, L., Maniglio, D., Motta, A., & Migliaresi, C. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0149 · Cited by 82
Lee, J. M., & Yeong, W. Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.979557 · Cited by 79
Self-citationCombined hydrogels that switch human pluripotent stem cells from self-renewal to differentiation
Dixon, J. E., Shah, D. A., Rogers, C., Hall, S., Weston, N., Parmenter, C. D. J., McNally, D. S., Denning, C. N., & Shakesheff, K. M. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1319685111 · Cited by 77
Electrohydrodynamic jetting of mouse neuronal cells
Eagles, P. A. M., Qureshi, A., & Jayasinghe, S. N. (2006) · Biochemical Journal · doi:10.1042/bj20051838 · Cited by 72
Sart, S., Ma, T., & Li, Y. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0690 · Cited by 63
Bio-electrospraying embryonic stem cells: interrogating cellular viability and pluripotency
Abeyewickreme, A., Kwok, A., McEwan, J. R., & Jayasinghe, S. N. (2009) · Integrative Biology · doi:10.1039/b819889f · Cited by 61
Predictive modeling of post bioprinting structure formation
McCune, M., Shafiee, A., Forgács, G., & Kosztin, I. (2014) · Soft Matter · doi:10.1039/c3sm52806e · Cited by 61
Modeling of Flow Rate, Pore Size, and Porosity for the Dispensing-Based Tissue Scaffolds Fabrication
Li, M. G., Tian, X. Y., & Chen, D. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3123331 · Cited by 60
Kinetic Monte Carlo and cellular particle dynamics simulations of multicellular systems
Flenner, E., Janosi, L., Barz, B., Neagu, A., Forgács, G., & Kosztin, I. (2012) · Physical Review E · doi:10.1103/physreve.85.031907 · Cited by 57
Coaxial additive manufacture of biomaterial composite scaffolds for tissue engineering
Cornock, R., Beirne, S., Thompson, B., & Wallace, G. G. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025002 · Cited by 52
Sun, Y., & Wang, Q. (2013) · Soft Matter · doi:10.1039/c2sm27090k · Cited by 48
Lee, H., Ahn, S., Bonassar, L. J., Chun, W., & Kim, G. (2013) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2012.0651 · Cited by 48
Bioprinting in cardiovascular tissue engineering: a review
Lee, J. M., Sing, S. L., Tan, E. Y. S., & Yeong, W. Y. (2016) · International Journal of Bioprinting · doi:10.18063/ijb.2016.02.006 · Cited by 43
Self-citationDesigner ‘blueprint’ for vascular trees: morphology evolution of vascular tissue constructs
Mironov, V. A., Zhang, J., Gentile, C., Brakke, K. A., Trusk, T. C., Jakab, K., Forgács, G., Kasyanov, V. A., Visconti, R. P., & Markwald, R. R. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750802657202 · Cited by 35
Al‐Abboodi, A., Tjeung, R., Doran, P. M., Yeo, L. Y., Friend, J., & Yik Chan, P. P. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400072 · Cited by 27
Kook, Y.-M., Kang, Y. M., Moon, S. H., & Koh, W. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.04.013 · Cited by 15
Design of vascular tree for organ bioprinting
Rezende, R. A., Kasyanov, V. A., Ozolanta, I., Brakke, K. A., da Silva, J. V. L., & Mironov, V. A. (2013) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63234-0.50026-9 · Cited by 4
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications
Pina, S., Ribeiro, V. P., Marques, C. F., Maia, F. R., Silva, T. H., Reis, R. L., & Oliveira, J. M. (2019) · Materials · doi:10.3390/ma12111824 · Cited by 493
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Self-citationAdditive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Self-citation
Metadata
- Authors
- Lee, J. M., & Yeong, W. Y.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2016-10-21
- Volume
- 5
- Issue
- 22
- Pages
- 2856-2865
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2535765559
- Cited by
- 310
- References
- 112
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.