The DOI matches its Crossref record; 106 of the 106 references it cites were found in a registry or an index.
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Abstract
Regenerative medicine has been highlighted as one of the UK's 8 ‘Great Technologies' with the potential to revolutionize patient care in the 21st Century. Over the last decade, the concept of ‘3D bioprinting' has emerged, which allows the precise deposition of cell laden bioinks with the aim of engineering complex, functional tissues. For 3D printing to be used clinically, there is the need to produce advanced functional biomaterials, a new generation of bioinks with suitable cell culture and high shape/print fidelity, to match or exceed the physical, chemical and biological properties of human tissue. With the rapid increase in knowledge associated with biomaterials, cell‐scaffold interactions and the ability to biofunctionalize/decorate bioinks with cell recognition sequences, it is important to keep in mind the ‘printability' of these novel materials. In this illustrated review, we define and refine the concept of ‘printability' and review seminal and contemporary studies to highlight the current ‘state of play' in the field with a focus on bioink composition and concentration, manipulation of nozzle parameters and rheological properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Challenges in tissue engineering
Ikada, Y. (2006) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0124 · Cited by 919
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Degradation of Partially Oxidized Alginate and Its Potential Application for Tissue Engineering
Bouhadir, K. H., Lee, K. Y., Alsberg, E., Damm, K. L., Anderson, K. W., & Mooney, D. J. (2001) · Biotechnology Progress · doi:10.1021/bp010070p · Cited by 672
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Engineering biological structures of prescribed shape using self-assembling multicellular systems
Jakab, K., Neagu, A., Mironov, V., Markwald, R. R., & Forgacs, G. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0400164101 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Tissue engineering: current state and perspectives
Lavik, E., & Langer, R. (2004) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-004-1580-z · Cited by 357
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Hoch, E., Hirth, T., Tovar, G. E. M., & Borchers, K. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20745e · Cited by 255
Shim, J.-H., Jang, K.-M., Hahn, S. K., Park, J. Y., Jung, H., Oh, K., Park, K. M., Yeom, J., Park, S. H., Kim, S. W., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014102 · Cited by 251
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Li, H., Liu, S., & Li, L. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.02.007 · Cited by 239
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Groll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Castro, N. J., O'Brien, J., & Zhang, L. G. (2015) · Nanoscale · doi:10.1039/c5nr03425f · Cited by 209
Sodian, R., Sperling, J. S., Martin, D. P., Egozy, A., Stock, U., Mayer, J. E., & Vacanti, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700320793 · Cited by 201
Peptide Bioink: Self-Assembling Nanofibrous Scaffolds for Three-Dimensional Organotypic Cultures
Loo, Y., Lakshmanan, A., Ni, M., Toh, L. L., Wang, S., & Hauser, C. A. E. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02859 · Cited by 196
3D printed nervous system on a chip
Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W., & McAlpine, M. C. (2016) · Lab on a Chip · doi:10.1039/c5lc01270h · Cited by 191
Langer, R. (2000) · Molecular Therapy · doi:10.1006/mthe.1999.0003 · Cited by 183
Extrusion printing of ionic–covalent entanglement hydrogels with high toughness
Bakarich, S. E., Panhuis, M. I. H., Beirne, S., Wallace, G. G., & Spinks, G. M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21159b · Cited by 177
Lee, B. H., Shirahama, H., Cho, N.-J., & Tan, L. P. (2015) · RSC Advances · doi:10.1039/c5ra22028a · Cited by 170
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Evaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
3D-engineering of Cellularized Conduits for Peripheral Nerve Regeneration
Hu, Y. X., Wu, Y., Gou, Z., Tao, J., Zhang, J., Liu, Q., Kang, T., Jiang, S., Huang, S., He, J., et al. (2016) · Scientific Reports · doi:10.1038/srep32184 · Cited by 161
Dubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Holmes, B. B., Bulusu, K. V., Plesniak, M. W., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/6/064001 · Cited by 152
Nanocellulose-alginate hydrogel for cell encapsulation
Park, M., Lee, D., & Hyun, J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.059 · Cited by 138
Guo, T., Holzberg, T. R., Lim, C. G., Gao, F., Gargava, A., Trachtenberg, J. E., Mikos, A. G., & Fisher, J. P. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6370 · Cited by 134
Bio-printing Cell-Laden Matrigel-Agarose Constructs
Fan, R., Piou, M., Darling, E., Cormier, D., Sun, J., & Wan, J. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216669238 · Cited by 132
Photocrosslinking-based bioprinting: Examining crosslinking schemes
Knowlton, S. M., Yenilmez, B., Anand, S., & Taşoğlu, S. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.03.001 · Cited by 120
Tissue fusion and cell sorting in embryonic development and disease: biomedical implications
Pérez-Pomares, J. M., & Foty, R. A. (2006) · BioEssays · doi:10.1002/bies.20442 · Cited by 118
Three-dimensional tissue constructs built by bioprinting
Jakab, K., Damon, B. J., Neagu, A., Kachurin, A., & Forgács, G. (2006) · Biorheology · doi:10.1177/0006355x2006043003004033 · Cited by 114
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 112
Inkjet printing Schwann cells and neuronal analogue NG108-15 cells
Tse, C., Whiteley, R., Yu, T., Stringer, J., MacNeil, S., Haycock, J. W., & Smith, P. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015017 · Cited by 110
Biomatrix/Polymer Composite Material for Heart Valve Tissue Engineering
Stamm, C., Khosravi, A., Grabow, N., Schmohl, K., Treckmann, N., Drechsel, A., Ma, N., Schmitz, K., Haubold, A. D., & Steinhoff, G. (2004) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2004.03.106 · Cited by 106
Krontiras, P., Gatenholm, P., & Hägg, D. A. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33198 · Cited by 97
Wang, X.-F., Lu, P.-J., Song, Y., Sun, Y., Wang, Y., & Wang, Y. (2016) · RSC Advances · doi:10.1039/c5ra21527g · Cited by 96
Kim, B. S., Jang, J., Chae, S., Gao, G., Kong, J., Ahn, M., & Cho, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035013 · Cited by 84
Neiman, J. A. S., Raman, R., Chan, V., Rhoads, M. G., Raredon, M. S. B., Velazquez, J. J., Dyer, R. L., Bashir, R., Hammond, P. T., & Griffith, L. G. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25494 · Cited by 79
Reed, S., Lau, G. Y., Delattre, B., López, D. D., Tomsia, A. P., & Wu, B. M. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015003 · Cited by 77
Sun, A. X., Lin, H., Beck, A. M., Kilroy, E. J., & Tuan, R. S. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00115 · Cited by 75
Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography
Schüller-Ravoo, S., Zant, E., Feijén, J., & Grijpma, D. W. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400363 · Cited by 58
Tissue Engineering of Human Nasal Alar Cartilage Precisely by Using Three-Dimensional Printing
Xu, Y., Fan, F., Kang, N., Wang, S., You, J., Wang, H., & Zhang, B. (2014) · Plastic & Reconstructive Surgery · doi:10.1097/prs.0000000000000856 · Cited by 58
Kinetic Monte Carlo and cellular particle dynamics simulations of multicellular systems
Flenner, E., Janosi, L., Barz, B., Neagu, A., Forgács, G., & Kosztin, I. (2012) · Physical Review E · doi:10.1103/physreve.85.031907 · Cited by 57
Three-Dimensional Cell Printing of Large-Volume Tissues: Application to Ear Regeneration
Lee, J., Kim, B. S., Seo, D., Park, J., & Cho, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2016.0362 · Cited by 53
The Lineage Specification of Mesenchymal Stem Cells Is Directed by the Rate of Fluid Shear Stress
Lü, J., Fan, Y., Gong, X., Zhou, X., Yi, C., Zhang, Y., & Pan, J. P. (2015) · Journal of Cellular Physiology · doi:10.1002/jcp.25278 · Cited by 51
Colloquium: Modeling the dynamics of multicellular systems: Application to tissue engineering
Kosztin, I., Vunjak‐Novakovic, G., & Forgács, G. (2012) · Reviews of Modern Physics · doi:10.1103/revmodphys.84.1791 · Cited by 45
Transforming healthcare through regenerative medicine
Jessop, Z. M., Al‐Sabah, A., Francis, W., & Whitaker, I. S. (2016) · BMC Medicine · doi:10.1186/s12916-016-0669-4 · Cited by 44
Self-citationLee, H., Yoo, J. J., Kang, H., & Cho, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015011 · Cited by 32
Weinandy, S., Laffar, S., Unger, R. E., Flanagan, T. C., Lösel, R., Kirkpatrick, C. J., van Zandvoort, M. A. M. J., Hermanns‐Sachweh, B., Dreier, A., Klee, D., et al. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0330 · Cited by 26
Shear stress regulates endothelial cell function through SRB 1‐ eNOS signaling pathway
Zhang, Y., Liao, B., Li, M., Cheng, M., Fu, Y., Liu, Q., Chen, Q., Liu, H., Fang, Y., Zhang, G., et al. (2016) · Cardiovascular Therapeutics · doi:10.1111/1755-5922.12199 · Cited by 25
The Second International Workshop on Bioprinting, Biopatterning and Bioassembly
Mironov, V. (2005) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.5.8.1111 · Cited by 22
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
Metadata
- Authors
- Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2017-05-30
- Volume
- 6
- Issue
- 16
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2617789879
- Cited by
- 495
- References
- 106
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.