The DOI matches its Crossref record; 167 of the 167 references it cites were found in a registry or an index.
Structured Macroporous Hydrogels: Progress, Challenges, and Opportunities
Abstract
Structured macroporous hydrogels that have controllable porosities on both the nanoscale and the microscale offer both the swelling and interfacial properties of bulk hydrogels as well as the transport properties of “hard” macroporous materials. While a variety of techniques such as solvent casting, freeze drying, gas foaming, and phase separation have been developed to fabricate structured macroporous hydrogels, the typically weak mechanics and isotropic pore structures achieved as well as the required use of solvent/additives in the preparation process all limit the potential applications of these materials, particularly in biomedical contexts. This review highlights recent developments in the field of structured macroporous hydrogels aiming to increase network strength, create anisotropy and directionality within the networks, and utilize solvent‐free or additive‐free fabrication methods. Such functional materials are well suited for not only biomedical applications like tissue engineering and drug delivery but also selective filtration, environmental sorption, and the physical templating of secondary networks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Hydrogels in drug delivery: Progress and challenges
Hoare, T. R., & Kohane, D. S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.027 · Cited by 3,776
Self-citationElectrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Bioconjugation by Copper(I)-Catalyzed Azide-Alkyne [3 + 2] Cycloaddition
Wang, Q., Chan, T. R., Hilgraf, R., Fokin, V. V., Sharpless, K. B., & Finn, M. G. (2003) · Journal of the American Chemical Society · doi:10.1021/ja021381e · Cited by 1,641
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Review of Hydrogels and Aerogels Containing Nanocellulose
De France, K. J., Hoare, T., & Cranston, E. D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00531 · Cited by 1,344
Self-citationControlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
Mechanical properties of hydrogels and their experimental determination
Anseth, K. S., Bowman, C. N., & Brannon-Peppas, L. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87644-7 · Cited by 1,156
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Tan, H., Chu, C. R., Payne, K. A., & Marra, K. G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.080 · Cited by 1,023
Griffin, D. R., Weaver, W. M., Scumpia, P. O., Di Carlo, D., & Segura, T. (2015) · Nature Materials · doi:10.1038/nmat4294 · Cited by 981
Industrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, C., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 965
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946
Martinsen, A., Skjåk‐Bræk, G., & Smidsrød, O. (1989) · Biotechnology and Bioengineering · doi:10.1002/bit.260330111 · Cited by 942
Baji, A., Mai, Y.-W., Wong, S.-C., Abtahi, M., & Chen, P. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.010 · Cited by 877
Microengineered hydrogels for tissue engineering
Khademhosseini, A., & Langer, R. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.021 · Cited by 830
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Adler-Abramovich, L., & Gazit, E. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00164h · Cited by 714
Continuous Electrospinning of Aligned Polymer Nanofibers onto a Wire Drum Collector
Katta, P., Alessandro, M., Ramsier, R. D., & Chase, G. G. (2004) · Nano Letters · doi:10.1021/nl0486158 · Cited by 688
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Protein adsorption to poly(ethylene oxide) surfaces
Gombotz, W. R., Guanghui, W., Horbett, T. A., & Hoffman, A. S. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820251211 · Cited by 634
Theoretical Description of Hydrogel Swelling: A Review
Ganji, F., Vasheghani‐Farahani, E., & Faraahani, E. V. (2010) · Iranian Polymer Journal · Cited by 633
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Recent advances in green hydrogels from lignin: a review
Thakur, V. K., & Thakur, M. K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.09.044 · Cited by 622
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Bulpitt, P., & Aeschlimann, D. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199911)47:2<152::aid-jbm5>3.0.co;2-i · Cited by 560
Baker, B. M., Trappmann, B., Wang, W. Y., Sakar, M. S., Kim, I. L., Shenoy, V. B., Burdick, J. A., & Chen, C. S. (2015) · Nature Materials · doi:10.1038/nmat4444 · Cited by 556
Phelps, E. A., Enemchukwu, N. O., Fiore, V. F., Sy, J. C., Murthy, N., Sulchek, T. A., Barker, T. H., & García, A. J. (2012) · Advanced Materials · doi:10.1002/adma.201103574 · Cited by 539
Miyamae, K., Nakahata, M., Takashima, Y., & Harada, A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502957 · Cited by 532
Rational design of hydrogels for tissue engineering: Impact of physical factors on cell behavior
Brandl, F., Sommer, F., & Goepferich, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.017 · Cited by 496
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Li, L., Wang, N., Jin, X., Deng, R., Nie, S., Sun, L., Wu, Q., Wei, Y., & Gong, C. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.050 · Cited by 455
High internal phase emulsions (HIPEs) — Structure, properties and use in polymer preparation
Cameron, N. R., & Sherrington, D. C. (1996) · Advances in Polymer Science · doi:10.1007/3-540-60484-7_4 · Cited by 454
Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R. E., & MacLellan, W. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.034 · Cited by 445
Synthesis and applications of emulsion-templated porous materials
Zhang, H., & Cooper, A. I. (2005) · Soft Matter · doi:10.1039/b502551f · Cited by 441
Advances in superporous hydrogels
Omidian, H., Rocca, J. G., & Park, K. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.09.028 · Cited by 438
Kabiri, K., Omidian, H., Hashemi, S. A., & Zohuriaan-Mehr, M. J. (2003) · European Polymer Journal · doi:10.1016/s0014-3057(02)00391-9 · Cited by 437
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Layer‐by‐Layer Hydrogen‐Bonded Polymer Films: From Fundamentals to Applications
Kharlampieva, E., Kozlovskaya, V., & Sukhishvili, S. A. (2009) · Advanced Materials · doi:10.1002/adma.200803653 · Cited by 409
Advances in non-hygienic applications of superabsorbent hydrogel materials
Zohuriaan-Mehr, M. J., Omidian, H., Doroudiani, S., & Kabiri, K. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4780-1 · Cited by 403
Three-Dimensional Photopatterning of Hydrogels Containing Living Cells
Liu, V. A., & Bhatia, S. N. (2002) · Biomedical Microdevices · doi:10.1023/a:1020932105236 · Cited by 399
Electrospun three-dimensional hyaluronic acid nanofibrous scaffolds
Ji, Y., Ghosh, K., Shu, X. Z., Li, B., Sokolov, J. C., Prestwich, G. D., Clark, R. A. F., & Rafailovich, M. H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.037 · Cited by 395
Functional Materials from Cellulose‐Derived Liquid‐Crystal Templates
Giese, M., Blusch, L. K., Khan, M. K., & MacLachlan, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201407141 · Cited by 393
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Imparting size, shape, and composition control of materials for nanomedicine
Euliss, L. E., DuPont, J. A., Gratton, S., & DeSimone, J. (2006) · Chemical Society Reviews · doi:10.1039/b600913c · Cited by 381
Prang, P., Müller, R., Eljaouhari, A., Heckmann, K., Kunz, W., Weber, T., Faber, C., Vroemen, M., Bogdahn, U., & Weidner, N. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.053 · Cited by 359
Tokarev, I., & Minko, S. (2010) · Advanced Materials · doi:10.1002/adma.201000165 · Cited by 349
Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 342
Gas foamed open porous biodegradable polymeric microspheres
Kim, T. K., Yoon, J. J., Lee, D. S., & Park, T. G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.081 · Cited by 338
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Luo, R., Wu, J., Dinh, N., & Chen, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503434 · Cited by 306
Park, H., Temenoff, J. S., Holland, T. A., Tabata, Y., & Mikos, A. G. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.083 · Cited by 293
Fabrication of three-dimensional porous cell-laden hydrogel for tissue engineering
Hwang, C. M., Sant, S., Masaeli, M., Kachouie, N. N., Zamanian, B., Lee, S.-H., & Khademhosseini, A. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035003 · Cited by 285
Novel cosmetic delivery systems: an application update
Patravale, V. B., & Mandawgade, S. D. (2008) · International Journal of Cosmetic Science · doi:10.1111/j.1468-2494.2008.00416.x · Cited by 280
Engineering cell alignment in vitro
Li, Y., Huang, G., Zhang, X., Wang, L., Du, Y., Lu, T. J., & Xu, F. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.11.007 · Cited by 272
Self-citationMicrodrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries
Pataky, K., Braschler, T., Negro, A., Renaud, P., Lutolf, M. P., & Brugger, J. (2012) · Advanced Materials · doi:10.1002/adma.201102800 · Cited by 267
Nih, L. R., Sideris, E., Carmichael, S. T., & Segura, T. (2017) · Advanced Materials · doi:10.1002/adma.201606471 · Cited by 262
Engineering porous scaffolds using gas-based techniques
Dehghani, F., & Annabi, N. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.04.005 · Cited by 251
Composite Hydrogels with Tunable Anisotropic Morphologies and Mechanical Properties
Chau, M., De France, K. J., Kopera, B., Machado, V. R., Rosenfeldt, S., Reyes, L., Chan, K. J. W., Förster, S., Cranston, E. D., Hoare, T., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00792 · Cited by 251
Self-citationEffects of Crosslinking Methods on Structure and Properties of Cellulose/PVA Hydrogels
Chang, C., Lue, A., & Zhang, L. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200800161 · Cited by 244
Lee, S. B., Kim, Y. H., Chong, M. S., Hong, S. H., & Lee, Y. M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.032 · Cited by 234
Elbert, D. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.028 · Cited by 232
Mesoscopic hydrogel molding to control the 3D geometry of bioartificial muscle tissues
Bian, W., Liau, B., Badie, N., & Bursac, N. (2009) · Nature Protocols · doi:10.1038/nprot.2009.155 · Cited by 225
High-throughput generation of hydrogel microbeads with varying elasticity for cell encapsulation
Kumachev, A., Greener, J., Tumarkin, E., Eiser, E., Zandstra, P. W., & Kumacheva, E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.10.033 · Cited by 213
Fabrication of porous chitosan scaffolds for soft tissue engineering using dense gas CO2
Ji, C., Annabi, N., Khademhosseini, A., & Dehghani, F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.043 · Cited by 212
Composites of functional polymeric hydrogels and porous membranes
Yang, Q., Adrus, N., Tomicki, F., & Ulbricht, M. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02234a · Cited by 212
Holland, T. A., Tessmar, J. K. V., Tabata, Y., & Mikos, A. G. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2003.09.007 · Cited by 208
Tonsomboon, K., & Oyen, M. L. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.03.001 · Cited by 207
One-Step Electrospinning of Cross-Linked Chitosan Fibers
Schiffman, J. D., & Schauer, C. L. (2007) · Biomacromolecules · doi:10.1021/bm7006983 · Cited by 206
Mussel-inspired hydrogels for biomedical and environmental applications
Li, L., Smitthipong, W., & Zeng, H. (2015) · Polymer Chemistry · doi:10.1039/c4py01415d · Cited by 203
Methods for Photocrosslinking Alginate Hydrogel Scaffolds with High Cell Viability
Rouillard, A. D., Berglund, C. M., Lee, J. Y., Polacheck, W. J., Tsui, Y., Bonassar, L. J., & Kirby, B. J. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0582 · Cited by 200
Experimental investigations on the multi-jet electrospinning process
Varesano, A., Carletto, R. A., & Mazzuchetti, G. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.03.003 · Cited by 198
Anisotropic tough poly(vinyl alcohol) hydrogels
Zhang, L., Zhao, J., Zhu, J., He, C., & Wang, H. (2012) · Soft Matter · doi:10.1039/c2sm26102b · Cited by 192
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Opportunities for Multicomponent Hybrid Hydrogels in Biomedical Applications
Lau, H. K., & Kiick, K. L. (2015) · Biomacromolecules · doi:10.1021/bm501361c · Cited by 183
Nanofibrous Hydrogels with Spatially Patterned Biochemical Signals to Control Cell Behavior
Wade, R. J., Bassin, E. J., Gramlich, W. M., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201404993 · Cited by 179
High strength of hemicelluloses based hydrogels by freeze/thaw technique
Guan, Y., Bian, J., Peng, F., Zhang, X.-M., & Sun, R.-C. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.085 · Cited by 177
Advances in cellulose-based superabsorbent hydrogels
Ma, J., Li, X., & Bao, Y. (2015) · RSC Advances · doi:10.1039/c5ra08522e · Cited by 175
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Rheological Characterization of in Situ Cross-Linkable Hyaluronan Hydrogels
Ghosh, K., Shu, X. Z., Mou, R., Lombardi, J., Prestwich, G. D., Rafailovich, M. H., & Clark, R. A. F. (2005) · Biomacromolecules · doi:10.1021/bm050361c · Cited by 166
Hiemstra, C., Zhou, W., Zhong, Z., Wouters, M., & Feijen, J. (2007) · Journal of the American Chemical Society · doi:10.1021/ja072113p · Cited by 158
Bencherif, S. A., Siegwart, D. J., Srinivasan, A., Horkay, F., Hollinger, J. O., Washburn, N. R., & Matyjaszewski, K. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.011 · Cited by 158
Protease-degradable electrospun fibrous hydrogels
Wade, R. J., Bassin, E. J., Rodell, C. B., & Burdick, J. A. (2015) · Nature Communications · doi:10.1038/ncomms7639 · Cited by 157
Particle Hydrogels Based on Hyaluronic Acid Building Blocks
Sideris, E., Griffin, D. R., Ding, Y., Li, S., Weaver, W. M., Carlo, D. D., Hsiai, T. K., & Segura, T. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00444 · Cited by 155
Stachowiak, A. N., Bershteyn, A., Tzatzalos, E., & Irvine, D. J. (2004) · Advanced Materials · doi:10.1002/adma.200400507 · Cited by 150
Imran, A. B., Seki, T., & Takeoka, Y. (2010) · Polymer Journal · doi:10.1038/pj.2010.87 · Cited by 148
Annabi, N., Fathi, A., Mithieux, S. M., Martens, P. J., Weiss, A. S., & Dehghani, F. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.10.024 · Cited by 141
Clickable Microgel Scaffolds as Platforms for 3D Cell Encapsulation
Caldwell, A. S., Campbell, G. T., Shekiro, K. M. T., & Anseth, K. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700254 · Cited by 140
The fabrication of elastin-based hydrogels using high pressure CO2
Annabi, N., Mithieux, S. M., Weiss, A. S., & Dehghani, F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.031 · Cited by 138
Fabrication and properties of chitin/hydroxyapatite hybrid hydrogels as scaffold nano-materials
Chang, C., Peng, N., He, M., Teramoto, Y., Nishio, Y., & Zhang, L. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.070 · Cited by 138
Tripathi, A., Kathuria, N., & Kumar, A. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32127 · Cited by 138
Ji, Y., Ghosh, K., Li, B., Sokolov, J. C., Clark, R. A. F., & Rafailovich, M. H. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600132 · Cited by 137
Smeets, N. M. B., Bakaic, E., Patenaude, M., & Hoare, T. R. (2014) · Chemical Communications · doi:10.1039/c3cc48514e · Cited by 132
Self-citationLiu, S., Jin, M. Y., Chen, Y., Gao, H., Shi, X., Cheng, W., Ren, L., & Wang, Y. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00145b · Cited by 131
Thermoresponsive Composite Hydrogels with Aligned Macroporous Structure by Ice-Templated Assembly
Bai, H., Polini, A., Delattre, B., & Tomsia, A. P. (2013) · Chemistry of Materials · doi:10.1021/cm4025827 · Cited by 130
Plieva, F. M., Huiting, X., Galaev, I. Y., Bergenståhl, B., & Mattìasson, B. (2006) · Journal of Materials Chemistry · doi:10.1039/b606734d · Cited by 122
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 121
Flégeau, K., Pace, R., Gautier, H., Réthoré, G., Guicheux, J., Visage, C. L., & Weiss, P. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.07.012 · Cited by 119
Lee, J. B., Wang, X., Faley, S. L., Baer, B. B., Balikov, D. A., Sung, H., & Bellan, L. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500792 · Cited by 110
Cross-linked open-pore elastic hydrogels based on tropoelastin, elastin and high pressure CO2
Annabi, N., Mithieux, S. M., Weiss, A. S., & Dehghani, F. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.051 · Cited by 108
Preface to the 50th anniversary issue of the Journal of Materials Science
Aindow, M. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9500-4 · Cited by 103
Hong, S., Sycks, D. G., Chan, H. F., Lin, S., López, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201570182 · Cited by 99
Kempen, D. H. R., Lu, L., Kim, C. W., Zhu, X., Dhert, W. J. A., Currier, B. L., & Yaszemski, M. J. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30336 · Cited by 98
Drug delivery applications for superporous hydrogels
Mastropietro, D. J., Omidian, H., & Park, K. (2011) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2012.641950 · Cited by 96
Baek, J., Chen, X., Sovani, S., Jin, S., Grogan, S. P., & DʼLima, D. D. (2015) · Journal of Orthopaedic Research® · doi:10.1002/jor.22802 · Cited by 93
Partap, S., Rehman, I. U., Jones, J. R., & Darr, J. A. (2006) · Advanced Materials · doi:10.1002/adma.200501423 · Cited by 93
Zhou, S., Bismarck, A., & Steinke, J. H. G. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20888e · Cited by 93
Erratum: Porous scaffold design for tissue engineering
Hollister, S. J. (2006) · Nature Materials · doi:10.1038/nmat1683 · Cited by 93
Kim, J., Yaszemski, M. J., & Lu, L. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0642 · Cited by 90
Gitli, T., & Silverstein, M. S. (2008) · Soft Matter · doi:10.1039/b809346f · Cited by 86
Barrow, M., & Zhang, H. (2013) · Soft Matter · doi:10.1039/c2sm27722k · Cited by 84
Supercritical carbon dioxide: putting the fizz into biomaterials
Barry, J. J. A., Silva, M. M. C. G., Popov, V. K., Shakesheff, K. M., & Howdle, S. M. (2005) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2005.1687 · Cited by 84
Cho, I. S., Cho, M. O., Li, Z., Nurunnabi, M., Park, S. Y., Kang, S., & Huh, K. M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.029 · Cited by 84
Intracellular Degradable Hydrogel Cubes and Spheres for Anti-Cancer Drug Delivery
Xue, B., Kozlovskaya, V., Liu, F., Chen, J., Williams, J. F., Campos, J., Saeed, M. F., & Kharlampieva, E. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03360 · Cited by 83
Inverted colloidal crystals as three-dimensional microenvironments for cellular co-cultures
Lee, J., Shanbhag, S., & Kotov, N. A. (2006) · Journal of Materials Chemistry · doi:10.1039/b605797g · Cited by 82
Lee, J., Tan, B., & Cooper, A. I. (2007) · Macromolecules · doi:10.1021/ma0625197 · Cited by 79
Gas-in-Liquid Foam Templating as a Method for the Production of Highly Porous Scaffolds
Barbetta, A., Gumiero, A., Pecci, R., et al. (2009) · Biomacromolecules · doi:10.1021/bm901051c · Cited by 79
High porosity, responsive hydrogel copolymers from emulsion templating
Ovadia, M., & Silverstein, M. S. (2015) · Polymer International · doi:10.1002/pi.5052 · Cited by 76
Kishan, A. P., Robbins, A. B., Mohiuddin, S., Jiang, M., Moreno, M. R., & Cosgriff‐Hernandez, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.041 · Cited by 67
Vrana, N. E., O’Grady, A., Kay, E., Cahill, P. A., & McGuinness, G. B. (2009) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.193 · Cited by 66
Light-Activated Ionic Gelation of Common Biopolymers
Javvaji, V., Baradwaj, A. G., Payne, G. F., & Raghavan, S. R. (2011) · Langmuir · doi:10.1021/la201860s · Cited by 66
Xu, F., Sheardown, H. D., & Hoare, T. R. (2015) · Chemical Communications · doi:10.1039/c5cc08053c · Cited by 65
Self-citationZhu, J., Wang, J., Liu, Q., Liu, Y., Wang, L., He, C., & Wang, H. (2012) · Journal of Materials Chemistry B · doi:10.1039/c2tb00288d · Cited by 62
3D B ioprinting of complex channels—Effects of material, orientation, geometry, and cell embedding
Wüst, S., Müller, R., & Hofmann, S. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35393 · Cited by 60
Hydrogel Scaffolds with Immobilized Bacteria for 3D Cultures
Gutiérrez, M. C., García-Carvajal, Z. Y., Jobbágy, M., Yuste, L., Rojo, F., Abrusci, C., Catalina, F., del Monte, F., & Ferrer, M. L. (2007) · Chemistry of Materials · doi:10.1021/cm062882s · Cited by 60
Macková, H., Plichta, Z., Hlídková, H., Sedláček, O., Konefał, R., Sadakbayeva, Z. (., Dušková‐Smrc̆ková, M., Horák, D., & Kubinová, Š. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01513 · Cited by 60
Portable nanofiber meshes dictate cell orientation throughout three-dimensional hydrogels
Yang, Y., Wimpenny, I., & Ahearne, M. (2011) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2010.12.011 · Cited by 59
Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism
Sergeeva, A., Feoktistova, N. A., Prokopović, V. Z., Gorin, D. A., & Volodkin, D. V. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500386 · Cited by 59
Graphene oxide-based composite hydrogels with self-assembled macroporous structures
Huang, Y., Zeng, M., Feng, Z., Yin, D., Xu, Q., & Fan, L. (2015) · RSC Advances · doi:10.1039/c5ra25910j · Cited by 55
Zhao, Q., Sun, J., Wu, X., & Lin, Y. (2011) · Soft Matter · doi:10.1039/c0sm01407a · Cited by 54
Marklein, R. A., Soranno, D. E., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c2sm25501d · Cited by 54
Staruch, R. M. T., Glass, G. E., Rickard, R. F., Hettiaratchy, S. P., & Butler, P. E. M. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0305 · Cited by 54
Tam, R. Y., Fisher, S. A., Baker, A. E. G., & Shoichet, M. S. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00627 · Cited by 51
High-strength silk fibroin scaffolds with anisotropic mechanical properties
Yetiskin, B., & Okay, O. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.079 · Cited by 48
Hermansson, A. ‐., & Buchheim, W. (1981) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(81)90433-1 · Cited by 47
Mao, M., He, J., Liu, Y., Li, X., & Li, D. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.025 · Cited by 46
Poly(HEMA) hydrogels with controlled pore architecture for tissue regeneration applications
Studenovská, H., Šlouf, M., & Rypáček, F. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3217-0 · Cited by 45
Generation of Stable Co-Cultures of Vascular Cells in a Honeycomb Alginate Scaffold
Yamamoto, M., James, D., Li, H., Butler, J. M., Rafii, S., & Rabbany, S. Y. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0010 · Cited by 42
Electrospun Honeycomb as Nests for Controlled Osteoblast Spatial Organization
Nedjari, S., Eap, S., Hébraud, A., Wittmer, C. R., Benkirane-Jessel, N., & Schlatter, G. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201400226 · Cited by 40
Hudson, S. D., Hutter, J. L., Nieh, M., Pencer, J., Millon, L. E., & Wan, W. (2009) · The Journal of Chemical Physics · doi:10.1063/1.3050096 · Cited by 37
Simhadri, J. J., Stretz, H. A., Oyanader, M. A., & Arce, P. E. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1003762 · Cited by 36
Crystal templating dendritic pore networks and fibrillar microstructure into hydrogels
Zawko, S. A., & Schmidt, C. E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.021 · Cited by 35
Supramolecular Nanofibrillar Polymer Hydrogels
Chau, M., Sriskandha, S. E., Thérien‐Aubin, H., & Kumacheva, E. (2015) · Advances in polymer science · doi:10.1007/978-3-319-15404-6_5 · Cited by 32
In‐Situ Architectures Designed in 3D Cell‐Laden Hydrogels Using Microscopic Laser Photolithography
Mironi‐Harpaz, I., Hazanov, L., Engel, G., Yelin, D., & Seliktar, D. (2015) · Advanced Materials · doi:10.1002/adma.201404185 · Cited by 32
Zhang, J., Wang, J. L., Zhang, H., Lin, J., Ge, Z., & Zou, X. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/3/035014 · Cited by 31
Wu, J., Zhao, Q., Liang, C., & Xie, T. (2013) · Soft Matter · doi:10.1039/c3sm52070f · Cited by 30
In situ pore formation in a polymer matrix by differential polymer degradation
Shastri, V. P., Hildgen, P., & Langer, R. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00144-3 · Cited by 27
Cryotemplation for the rapid fabrication of porous, patternable photopolymerized hydrogels
Thomas, A. M., & Shea, L. D. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00585f · Cited by 17
Lee, S., Tong, X., Han, L., Behn, A. W., & Yang, F. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35662 · Cited by 15
Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth
Schulte, V. A., Alves, D. F., Dalton, P. P., Möller, M., Lensen, M. C., & Mela, P. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200376 · Cited by 14
Toughening hydrogels by immersing with oppositely charged polymers
Li, Y., Peng, X., Zhao, D. S., Shi, S., He, C., & Wang, H. (2016) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24233 · Cited by 8
Cited by
Challenges and Recent Progress in Oral Drug Delivery Systems for Biopharmaceuticals
Homayun, B., Lin, X., & Choi, H.-J. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11030129 · Cited by 837
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications
Pina, S., Ribeiro, V. P., Marques, C. F., Maia, F. R., Silva, T. H., Reis, R. L., & Oliveira, J. M. (2019) · Materials · doi:10.3390/ma12111824 · Cited by 493
Latest Advances in Cryogel Technology for Biomedical Applications
Memic, A., Colombani, T., Eggermont, L. J., Rezaeeyazdi, M., Steingold, J., Rogers, Z. J., Navare, K. J., Mohammed, H. S., & Bencherif, S. A. (2019) · Advanced Therapeutics · doi:10.1002/adtp.201800114 · Cited by 310
De France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
Self-citation
Metadata
- Authors
- De France, K. J., Xu, F., & Hoare, T.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2017-12
- Volume
- 7
- Issue
- 1
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2772342946
- Cited by
- 279
- References
- 167
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.