The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Open accessAbstract
Additive manufacturing, or 3D printing, has become significantly more commonplace in tissue engineering over the past decade, as a variety of new printing materials have been developed. In extrusion‐based printing, materials are used for applications that range from cell free printing to cell‐laden bioinks that mimic natural tissues. Beyond single tissue applications, multi‐material extrusion based printing has recently been developed to manufacture scaffolds that mimic tissue interfaces. Despite these advances, some material limitations prevent wider adoption of the extrusion‐based 3D printers currently available. This progress report provides an overview of this commonly used printing strategy, as well as insight into how this technique can be improved. As such, it is hoped that the prospective report guides the inclusion of more rigorous material characterization prior to printing, thereby facilitating cross‐platform utilization and reproducibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Modeling Development and Disease with Organoids
Clevers, H. (2016) · Cell · doi:10.1016/j.cell.2016.05.082 · Cited by 3,196
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Engineering anatomically shaped human bone grafts
Grayson, W. L., Fröhlich, M., Yeager, K., Bhumiratana, S., Chan, M. E., Cannizzaro, C., Wan, L. Q., Liu, X. S., Guo, X. E., & Vunjak-Novakovic, G. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0905439106 · Cited by 425
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W., Zhang, Y. S., Heinrich, M. A., De Ferrari, F., Jang, H. L., Bakht, S. M., Alvarez, M. M., Yang, J., Li, Y., Trujillo‐de Santiago, G., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 424
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Nguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds
Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S., & Lau, A. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410512525 · Cited by 241
Nyberg, E., Rindone, A., Dorafshar, A., & Grayson, W. L. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0418 · Cited by 229
Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e98 · Cited by 206
Three-Dimensional Printing of Bone Extracellular Matrix for Craniofacial Regeneration
Hung, B. P., Naved, B. A., Nyberg, E. L., Dias, M., Holmes, C. A., Elisseeff, J. H., Dorafshar, A. H., & Grayson, W. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00101 · Cited by 165
Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09201-5 · Cited by 165
Modifying release characteristics from 3D printed drug-eluting products
Boetker, J. P., Water, J. J., Aho, J., Arnfast, L., Bohr, A., & Rantanen, J. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.03.013 · Cited by 158
Laser direct writing of micro- and nano-scale medical devices
Gittard, S. D., & Narayan, R. J. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.14 · Cited by 153
Guo, T., Holzberg, T. R., Lim, C. G., Gao, F., Gargava, A., Trachtenberg, J. E., Mikos, A. G., & Fisher, J. P. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6370 · Cited by 134
Jung, J. W., Lee, J., & Cho, D. (2016) · Scientific Reports · doi:10.1038/srep21685 · Cited by 133
A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink
Lorson, T., Jaksch, S., Lübtow, M. M., Jüngst, T., Gröll, J., Lühmann, T. C., & Luxenhofer, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00481 · Cited by 114
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Hollister, S. J., Flanagan, C. L., Zopf, D., Morrison, R. J., Nasser, H. B., Patel, J. J., Ebramzadeh, E., Sangiorgio, S. N., Wheeler, M. B., & Green, G. E. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1270-2 · Cited by 111
Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Piard, C., Santoro, M., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00026 · Cited by 105
Self-citationBüyüksungur, S., Tanır, T. E., Büyüksungur, A., Bektas, E. I., Köse, G. T., Yücel, D., Beyzadeoğlu, T., Cetinkaya, E., Yenigun, C., Tönük, E., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00514h · Cited by 99
Kuo, C., Eranki, A., Placone, J. K., Rhodes, K. R., Aranda‐Espinoza, H., Fernandes, R., Fisher, J. P., & Kim, P. C. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00031 · Cited by 90
Self-citationFabrication of biomimetic bone grafts with multi-material 3D printing
Sears, N. A., Dhavalikar, P., Whitely, M. E., & Cosgriff‐Hernandez, E. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7077 · Cited by 87
3D printing of PLGA scaffolds for tissue engineering
Mironov, A. V., Grigoryev, A. M., Кротова, Л. И., Skaletsky, N. N., Popov, V. K., & Sevastianov, V. I. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35871 · Cited by 75
Bioprinting of 3D Tissue Models Using Decellularized Extracellular Matrix Bioink
Pati, F., & Cho, D. (2017) · Methods in molecular biology · doi:10.1007/978-1-4939-7021-6_27 · Cited by 75
Tsai, Y.-C., Li, S., Hu, S. ‐., Chang, W.-C., Jeng, U., & Hsu, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10697 · Cited by 74
A 3D Bioprinting Exemplar of the Consequences of the Regulatory Requirements on Customized Processes
Hourd, P. C., Medcalf, N., Segal, J. I., & Williams, D. (2015) · Regenerative Medicine · doi:10.2217/rme.15.52 · Cited by 69
A cell-printing approach for obtaining hASC-laden scaffolds by using a collagen/polyphenol bioink
Yeo, M. G., & Kim, G. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6997 · Cited by 68
Sooppan, R., Paulsen, S. J., Han, J. J., Ta, A. H., Dinh, P. V., Gaffey, A. C., Venkataraman, C. M., Trubelja, A., Hung, G., Miller, J. S., et al. (2015) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2015.0239 · Cited by 66
Bégin‐Drolet, A., Dussault, M.-A., Fernandez, S. A., Larose-Dutil, J., Leask, R. L., Hoesli, C. A., & Ruel, J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.006 · Cited by 66
Three-Dimensional Printing Articular Cartilage: Recapitulating the Complexity of Native Tissue
Guo, T., Lembong, J., Zhang, L. G., & Fisher, J. P. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0316 · Cited by 65
Kuo, C., Wilson, E., Fuson, A., Gandhi, N., Monfaredi, R., Jenkins, A. L., Romero, M. E., Santoro, M., Fisher, J. P., Cleary, K., et al. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2017.0246 · Cited by 65
Walker, J. M., Bodamer, E., Kleinfehn, A. P., Luo, Y., Becker, M. L., & Dean, D. (2017) · Progress in Additive Manufacturing · doi:10.1007/s40964-017-0021-3 · Cited by 64
Cell sheet based bioink for 3D bioprinting applications
Bakırcı, E., Toprakhisar, B., Zeybek, M. C., İnce, G. Ö., & Koç, B. (2017) · Biofabrication · doi:10.1088/1758-5090/aa764f · Cited by 60
A desktop multi-material 3D bio-printing system with open-source hardware and software
Lee, J., Kim, K. E., Bang, S., Noh, I., & Lee, C. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0072-x · Cited by 59
Developing 3D Scaffolds in the Field of Tissue Engineering to Treat Complex Bone Defects
Albrecht, L. D., Sawyer, S. W., & Soman, P. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0006 · Cited by 48
3D Printed Vascular Networks Enhance Viability in High-Volume Perfusion Bioreactor
Ball, O. M., Nguyen, B. B., Placone, J. K., & Fisher, J. P. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1662-y · Cited by 46
Self-citationTrachtenberg, J. E., Santoro, M., Williams, C., Piard, C., Smith, B. T., Placone, J. K., Menegaz, B. A., Molina, E. R., Lamhamedi-Cherradi, S.-E., Ludwig, J. A., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00641 · Cited by 45
Self-citationDifferences in time-dependent mechanical properties between extruded and molded hydrogels
Ersumo, N. T., Witherel, C. E., & Spiller, K. L. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035012 · Cited by 41
3D Printing and Biofabrication
Ovsianikov, A., Yoo, J. J., & Mironov, V. (2016) · Springer eBooks · doi:10.1007/978-3-319-40498-1 · Cited by 39
Hatamleh, M. M., Bhamrah, G., Ryba, F. M., Mack, G. J., & Huppa, C. (2016) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000003039 · Cited by 30
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Metadata
- Authors
- Placone, J. K., & Engler, A. J.
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2017-12-28
- Volume
- 7
- Issue
- 8
- Pages
- e1701161-e1701161
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2779051958
- Cited by
- 486
- References
- 74
- FWCI
- 8.85
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.