25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 901–1,000 of 1,002
Raddatz, L., Lavrentieva, A. V., Pepelanova, I., Bahnemann, J., Geier, D., Becker, T. M., Scheper, T. H., & Beutel, S. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9040063 · Cited by 43
“Despite its comparable low resolution of about 200–500 μm in the x/y plane, EB’s fabrication speed is significantly higher compared to other methods and is often described as the most promising among bioprinting techniques [11,14,15].”
BackgroundAbu-Awwad, H. A.-D. M., Thiagarajan, L., Kanczler, J. M., Amer, M. H., Bruce, G., Lanham, S., Rumney, R. M. H., Oreffo, R. O. C., & Dixon, J. E. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.06.035 · Cited by 39
“In order to develop a printable formulation of our system, the material would have to possess a certain level of viscosity [43,44] that allows continuous flow of the material through an extrusion printing head/ needle.”
BackgroundAn insight into cell-laden 3D-printed constructs for bone tissue engineering
Swetha, S. V., Lavanya, K., Sruthi, R., & Selvamurugan, N. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb02019b · Cited by 39
Assembly of Defect-Free Microgel Nanomembranes for CO 2 Separation
Hoshino, Y., Gyobu, T., Imamura, K., Hamasaki, A., Honda, R., Horii, R., Yamashita, C., Terayama, Y., Watanabe, T., Aki, S., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06447 · Cited by 39
The Importance of Interfaces in Multi‐Material Biofabricated Tissue Structures
Viola, M., Piluso, S., Gröll, J., Vermonden, T., Malda, J., & Castilho, M. D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101021 · Cited by 42
Self-citationAdditive Manufacturing of Micro-Electro-Mechanical Systems (MEMS)
Pasquale, G. D. (2021) · Micromachines · doi:10.3390/mi12111374 · Cited by 40
Liu, S., Kilian, D., Ahlfeld, T., Hu, Q., & Gelinsky, M. (2023) · Biofabrication · doi:10.1088/1758-5090/acb8dc · Cited by 41
“Meanwhile, cell density in both groups was decreased, a typical phenomenon in bioprinted scaffolds based on highly viscous bioinks reported in previouswork [8].”
BackgroundInfluentialDirect three-dimensional printing of polymeric scaffolds with nanofibrous topography
Prasopthum, A., Shakesheff, K. M., & Yang, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aaa15b · Cited by 41
Additive manufacturing of bio-based hydrogel composites: recent advances
Siwal, S. S., Mishra, K., Saini, A. K., Alsanie, W. F., Kovalcik, A., & Thakur, V. K. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02516-z · Cited by 39
An overview of additive manufacturing methods, materials, and applications for flexible structures
Jayswal, A., & Adanur, S. (2022) · Journal of Industrial Textiles · doi:10.1177/15280837221114638 · Cited by 38
“Hence, the design of screw has to be revised in order to make the printing of biomaterials possible.(24) The polymers used for DIW often have limited mechanical properties and experience fatigue under repeated stress, which causes limitations in their applications.”
BackgroundMethodArdakani, A. H. G., Cheema, U., Brown, R. A., & Shipley, R. J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0501 · Cited by 39
3D printing of biocomposites for osteochondral tissue engineering
Vyas, C., Poologasundarampillai, G., Hoyland, J. A., & Bártolo, P. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00013-5 · Cited by 49
Wang, Y., Yu, H., Yang, H., Hao, X., Tang, Q., & Zhang, X. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700348 · Cited by 38
Multi-length scale bioprinting towards simulating microenvironmental cues
Gill, E., Li, X., Birch, M., & Huang, Y. Y. S. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0014-1 · Cited by 39
Pham, T.-N., Su, C.-F., Huang, C.-C., & Jan, J. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111316 · Cited by 40
Hauptstein, J., Forster, L., Nadernezhad, A., Horder, H., Stahlhut, P., Gröll, J., Blunk, T., & Teßmar, J. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100331 · Cited by 40
Nie, L., Li, J., Lu, G., Wei, X., Deng, Y., Liu, S., Zhong, S., Shi, Q., Hou, R., Sun, Y., et al. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103697 · Cited by 43
Global hotspots and emerging trends in 3D bioprinting research
Ding, Z., Tang, N., Huang, J., Cao, X., & Wu, S. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1169893 · Cited by 39
“Before 2015, only a few types of bioinks were available for 3D bioprinting, including combined biopolymers and composite materials (Pataky et al. 2012; Malda et al. 2013; Wüst et al. 2014; Das et al. 2015; Kesti et al. 2015), fibrin (Cui and Boland, 2009; Cubo et al.”
BackgroundLee, J. E., Park, S. J., Yoon, Y., Son, Y., & Park, S.-H. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.12.020 · Cited by 38
Pottathara, Y. B., & Kokol, V. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00266 · Cited by 37
Kim, M. H., & Nam, S. Y. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00092 · Cited by 37
Ghomi, E. R., Eshkalak, S. K., Singh, S., Chinnappan, A., Ramakrishna, S., & Narayan, R. J. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2020-0139 · Cited by 38
3D bioprinting for in vitro models of oral cancer: Toward development and validation
Almela, T., Tayebi, L., & Moharamzadeh, K. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00132 · Cited by 38
Advances in Photocrosslinkable Materials for 3D Bioprinting
Zhang, W., Ye, W., & Yan, Y. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100663 · Cited by 39
Bioactive Inks Development for Osteochondral Tissue Engineering: A Mini-Review
Bakhtiary, N., Liu, C., & Ghorbani, F. (2021) · Gels · doi:10.3390/gels7040274 · Cited by 41
“Nonetheless, upper than the yield point, the deformation required during the injection will start [42].”
BackgroundA review on 3D printing functional brain model
Samanipour, R., Tahmooressi, H., Nejad, H. R., Hirano, M., Shin, S. R., & Hoorfar, M. (2022) · Biomicrofluidics · doi:10.1063/5.0074631 · Cited by 39
Majcher, M. J., & Hoare, T. R. (2019) · Polymers and polymeric composites · doi:10.1007/978-3-319-95990-0_17 · Cited by 44
Robotic in situ bioprinting for cartilage tissue engineering
Wang, Y., Pereira, R. F., Peach, C. A., Huang, B., Vyas, C., & Bártolo, P. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acda67 · Cited by 38
Pore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding
Serex, L., Braschler, T. M., Филиппова, А., Rochat, A., Béduer, A., Bertsch, A., & Renaud, P. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700340 · Cited by 37
Hydrogels and hydrogel composites for 3D and 4D printing applications
Liu, S., Chen, X., & Zhang, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00014-4 · Cited by 53
Tan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00313 · Cited by 36
Fish scale containing alginate dialdehyde-gelatin bioink for bone tissue engineering
Kara, A., Distler, T., Tıhmınlıoğlu, F., & Boccaccini, A. R. (2023) · Biofabrication · doi:10.1088/1758-5090/acb6b7 · Cited by 40
“factors to the damaged tissue or organ, as well as allowing mechanical support during the regeneration period [2].”
BackgroundDiffusion‐Based 3D Bioprinting Strategies
Cai, B., Kilian, D., Mejia, D. R., Rios, R. J., Ali, A., & Heilshorn, S. C. (2023) · Advanced Science · doi:10.1002/advs.202306470 · Cited by 40
MXene Hydrogels for Soft Multifunctional Sensing: A Synthesis‐Centric Review
Amara, U., Xu, L., Hussain, I., Yang, K., Hu, H., & Ho, D. L. (2024) · Small · doi:10.1002/smll.202405047 · Cited by 38
Nanoscale 3D Bioprinting for Osseous Tissue Manufacturing
Wang, Y., Gao, M. X., Wang, D., Sun, L., & Webster, T. J. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s172916 · Cited by 58
“challenge to regenerate bone tissue over a short period of time without any side-effects.(27) In this review, micro-nano”
BackgroundChong, L. S. H., Zhang, J., Bhat, K. S., Yong, D., & Song, J. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120473 · Cited by 37
Engineering a Chemically Defined Hydrogel Bioink for Direct Bioprinting of Microvasculature
Barrs, R. W., Jia, J., Ward, M., Richards, D., Yao, H., Yost, M. J., & Mei, Y. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00947 · Cited by 36
3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 38
Progress of 3D Printing Techniques for Nasal Cartilage Regeneration
Cao, Y., Sang, S., An, Y., Xiang, C., Li, Y., & Zhen, Y. (2021) · Aesthetic Plastic Surgery · doi:10.1007/s00266-021-02472-4 · Cited by 37
State-of-art affordable bioprinters: A guide for the DiY community
Garciamendez‐Mijares, C. E., Agrawal, P. S., Martínez, G. G., Juárez, E. C., & Zhang, Y. S. (2021) · Applied Physics Reviews · doi:10.1063/5.0047818 · Cited by 38
Advances in current in vitro models on neurodegenerative diseases
Pereira, I., Lopez-Martinez, M. J., & Samitier, J. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1260397 · Cited by 38
“The nozzle diameter is also important since small diameters allow a better resolution but might suffer clogging (Chang et al., 2008; Malda et al., 2013; Xu et al., 2019).”
BackgroundBiofabrication: The Future of Regenerative Medicine
Paxton, N. C., Powell, S. K., & Woodruff, M. A. (2016) · Techniques in Orthopaedics · doi:10.1097/bto.0000000000000184 · Cited by 51
“However, fabrication techniques have not yet overcome reproducibility challenges and can vary significantly between trials.(118) More recently, synthetic polymer– based hydrogels are being developed which have significantly higher shape fidelity.”
BackgroundDecellularized Hydrogels in Bone Tissue Engineering: A Topical Review
Pacifici, A., Laino, L., GARGARI, M., Guzzo, F., Luz, A. V., Polimeni, A., & Pacifici, L. (2018) · International Journal of Medical Sciences · doi:10.7150/ijms.22789 · Cited by 37
Printability study of metal ion crosslinked PEG-catechol based inks
Włodarczyk‐Biegun, M. K., Paez, J. I., Villiou, M., Feng, J., & del Campo, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab673a · Cited by 35
Lee, J., Chuah, C. Y., Tan, W. S., Song, J., & Bae, T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130883 · Cited by 35
Serna, J. A., Rueda-Gensini, L., Céspedes-Valenzuela, D. N., Cifuentes, J., Cruz, J. C., & Muñoz-Camargo, C. (2021) · Polymers · doi:10.3390/polym13193263 · Cited by 36
“Although the mechanical and micro-architectural characteristics of dECM-based hydrogels significantly influence cell behavior [108,109], in most cases, they are not enough for ensuring full functionality in vitro.”
BackgroundJury, M., Matthiesen, I., Boroojeni, F. R., Ludwig, S. L., Civitelli, L., Winkler, T. E., Selegård, R., Herland, A., & Aili, D. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102097 · Cited by 37
Albrecht, F. B., Schmidt, F. F., Volz, A., & Kluger, P. J. (2022) · Gels · doi:10.3390/gels8100611 · Cited by 37
“This comparison aimed to show the influences caused by the bioprinting process as it can influence cell viability due to enhanced pressure during extrusion and long fabrication times [63].”
BackgroundThe Next Frontier of 3D Bioprinting: Bioactive Materials Functionalized by Bacteria
Liu, Y., Xia, X., Liu, Z., & Dong, M. (2022) · Small · doi:10.1002/smll.202205949 · Cited by 36
The current state of the art in gellan-based printing inks in tissue engineering
Cernencu, A. I., & Ioniţă, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120676 · Cited by 36
Cell-Laden 3D Printed Scaffolds for Bone Tissue Engineering
Piard, C., Chen, Y., & Fisher, J. P. (2015) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-015-9198-5 · Cited by 37
Rerouting mesenchymal stem cell trajectory towards epithelial lineage by engineering cellular niche
Barui, A., Chowdhury, F., Pandit, A. S., & Datta, P. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.036 · Cited by 37
Engineering in vitro human tissue models through bio-design and manufacturing
Zhang, Y. S., & Khademhosseini, A. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00080-w · Cited by 36
“Bioprinting refers to 3D positioning of a bioink or a combination of multiple bioinks into a structurally defined volumetric tissue construct through robotically programmed operations [10, 11].”
BackgroundOliveira, H., Medina, C. F., Stachowicz, M., dos Santos, B. P., Chagot, L., Dusserre, N., & Fricain, J. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00134 · Cited by 35
Predicting Cell Stress and Strain during Extrusion Bioprinting
Müller, S., Fabry, B., & Gekle, S. (2023) · Physical Review Applied · doi:10.1103/physrevapplied.19.064061 · Cited by 35
Chen, B., Zhu, D., Li, Q., Wang, C., Cui, J., Zheng, Z., & Wang, X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14743 · Cited by 35
Sergis, V., Kelly, D., Pramanick, A., Britchfield, G., Mason, K., & Daly, A. C. (2025) · Biofabrication · doi:10.1088/1758-5090/adaa22 · Cited by 38
Wang, D., Xiong, Y., Zhang, B., Zhang, Y., Rosen, D. W., & Ge, Q. (2020) · Soft Matter · doi:10.1039/c9sm02119a · Cited by 34
Cui, Y., Jin, R., Zhou, Y., Yu, M., Ling, Y., & Wang, L. (2020) · Biomedical Materials · doi:10.1088/1748-605x/abc38e · Cited by 36
Guidelines for establishing a 3-D printing biofabrication laboratory
Sanicola, H. W., Stewart, C. E., Müller, M., Ahmadi, F., Wang, D., Powell, S. K., Sarkar, K., Cutbush, K., Woodruff, M. A., & Brafman, D. A. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107652 · Cited by 40
An Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile
Hahn, L., Karakaya, E., Zorn, T., Sochor, B., Maier, M., Stahlhut, P., Forster, S., Fischer, K., Seiffert, S., Pöppler, A., et al. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00427 · Cited by 35
3D Bio-Printability of Hybrid Pre-Crosslinked Hydrogels
Nelson, C., Tuladhar, S., Launen, L. A., & Habib, A. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222413481 · Cited by 35
Review on novel biomaterials and innovative 3D printing techniques in biomedical applications
Pradeep, P. V., & Paul, L. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.01.072 · Cited by 38
3D Bioprinting Technology and Hydrogels Used in the Process
Lima, T. D. P. D. L., Canelas, C. A. D. A., Concha, V. O. C., da Costa, F. A. M., & Passos, M. F. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040214 · Cited by 35
“One of the examples of inks from biomaterials is sacrificial materials (such as agarose, Pluronic 127, alginate, and gelatin), which are printed and dissolved without affecting cell survival [40,41].”
BackgroundFormulation and Characterization of a SIS-Based Photocrosslinkable Bioink
Serna, J. A., Florez, S. L., Talero, V. A., Briceño, J. C., Muñoz-Camargo, C., & Cruz, J. C. (2019) · Polymers · doi:10.3390/polym11030569 · Cited by 34
“One of the major drawbacks of extrusion-based 3D bioprinting is the lack of highly bioactive and mechanically suitable bioinks, which are crucial attributes used to mimic the native environment of cells [4,5].”
Background3D Bioprinting of Glioblastoma Model
Parra‐Cantu, C., Li, W., Quiñones‐Hinojosa, A., & Zhang, Y. S. (2020) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2019-0027 · Cited by 35
Nanocellulose Reinforced Hyaluronan-Based Bioinks
Träger, A., Naeimipour, S., Jury, M., Selegård, R., & Aili, D. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00168 · Cited by 33
Three-dimensional printed sodium alginate clay nanotube composite scaffold for bone regeneration
Zhou, Y., Gao, X., Zhao, M., Li, L., & Liu, M. (2024) · Composites Science and Technology · doi:10.1016/j.compscitech.2024.110537 · Cited by 33
Bioprinting of gelatin-based materials for orthopedic application
Waidi, Y. O., Kariim, I., & Datta, S. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1357460 · Cited by 34
Two-component thermosensitive hydrogels: Phase separation affecting rheological behavior
Abbadessa, A., Landín, M., Blenke, E. O., Hennink, W. E., & Vermonden, T. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.029 · Cited by 35
Self-citationLearning-Based Cell Injection Control for Precise Drop-on-Demand Cell Printing
Shi, J., Wu, B., Song, B., Song, J., Li, S., Trau, D., & Lu, W. F. (2018) · Annals of Biomedical Engineering · doi:10.1007/s10439-018-2054-2 · Cited by 33
Novel Strategies in Artificial Organ Development: What Is the Future of Medicine?
Klak, M., Bryniarski, T., Kowalska, P. D., Gomółka, M., Tymicki, G., Kosowska, K., Cywoniuk, P., Dobrzański, T., Turowski, P., & Wszola, M. (2020) · Micromachines · doi:10.3390/mi11070646 · Cited by 36
3D bioprinting of an electroactive and self‐healing polysaccharide hydrogels
Wang, Y., Han, L., Zhang, X., Cao, L., Hu, K., Li, L., & Wei, Y. (2021) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.3238 · Cited by 33
Hydrogel Composites with Different Dimensional Nanoparticles for Bone Regeneration
Li, X., Yang, Z., Fang, L., Ma, C. B., Zhao, Y., Liu, H., Che, S., Zvyagin, A. V., Yang, B., & Lin, Q. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100362 · Cited by 34
Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 36
Non-Invasive Three-Dimensional Cell Analysis in Bioinks by Raman Imaging
Marzi, J., Fuhrmann, E., Brauchle, E., Singer, V., Pfannstiel, J., Schmidt, I., & Hartmann, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24463 · Cited by 35
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38
“In addition to the cell biological functionality, the form stability of applied bioinks should be taken into consideration [76].”
BackgroundFedore, C. W., Tse, L. Y. L., Nam, H. K., Barton, K. L., & Hatch, N. E. (2017) · Orthodontics and Craniofacial Research · doi:10.1111/ocr.12159 · Cited by 33
3D Bioprinting of Artificial Tissues: Construction of Biomimetic Microstructures
Luo, Y., Lin, X., & Huang, P. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800034 · Cited by 33
3D Electrophysiological Measurements on Cells Embedded within Fiber‐Reinforced Matrigel
Schaefer, N., Janzen, D., Bakırcı, E., Hrynevich, A., Dalton, P. D., & Villmann, C. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801226 · Cited by 38
Emerging Nano/Micro-Structured Degradable Polymeric Meshes for Pelvic Floor Reconstruction
Paul, K., Darzi, S., Werkmeister, J. A., Gargett, C. E., & Mukherjee, S. (2020) · Nanomaterials · doi:10.3390/nano10061120 · Cited by 36
“The choice of bio-ink must allow high-definition printability that largely depends on viscoelasticity, strong shear-thinning behaviour, ease of crosslinking, cell protection during printing, biocompatibility for cell proliferation and biodegradability enhancing tissue integration with native ECM [93,97].”
BackgroundBeato, P. S., Midha, S., Pitsillides, A. A., Miller, A. F., Torii, R., & Kalaskar, D. M. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314221133480 · Cited by 35
Biomaterial-based in vitro 3D modeling of glioblastoma multiforme
Ahmed, T. (2023) · Cancer Pathogenesis and Therapy · doi:10.1016/j.cpt.2023.01.002 · Cited by 34
“18,19 Cells embedded in hydrogels experience ECM signals from all angles, similar to their normal states, whereas implanted cells only receive ECM cues from the hydrogel-contacting side.”
BackgroundRecent progress of bio‐printed PEGDA ‐based bioinks for tissue regeneration
Hamedi, E., Vahedi, N., Sigaroodi, F., Parandakh, A., Hosseinzadeh, S., Zeinali, F., & Khani, M. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6164 · Cited by 34
Advances in 3D bioprinting for urethral tissue reconstruction
Booth, D. F., Afshari, R., Ghovvati, M., Shariati, K., Sturm, R. M., & Annabi, N. (2023) · Trends in biotechnology · doi:10.1016/j.tibtech.2023.10.009 · Cited by 33
“LBB is generally characterized by its high printing resolution, slower fabrication speed, and ori fi ce-free droplet-based nature which is less susceptible to clogging-related failures associated with highly viscous bioinks [63].”
Jiang, X., Yang, Z., Zhang, J., Liang, H., Wang, H., & Lu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130190 · Cited by 33
3D Printable κ‐Carrageenan‐Based Granular Hydrogels
Bono, F., Zúñiga, S. H. S., & Amstad, E. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202413368 · Cited by 32
3D Bioprinting for Musculoskeletal Applications
Popov, A., Malferrari, S., & Kalaskar, D. M. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0004 · Cited by 33
Coaxial nozzle-assisted electrohydrodynamic printing for microscale 3D cell-laden constructs
Liang, H., He, J., Chang, J., Zhang, B., & Li, D. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.127 · Cited by 33
Hydrocolloid Inks for 3D Printing of Porous Hydrogels
Sears, N. A., Wilems, T. S., Gold, K. A., Lan, Z., Cereceres, S., Dhavalikar, P., Foudazi, R., & Cosgriff‐Hernandez, E. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800343 · Cited by 34
Computer-Aided Design and Manufacturing (CAD/CAM) for Bioprinting
Fay, C. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_3 · Cited by 35
Wenger, L., Radtke, C. P., Göpper, J., Wörner, M., & Hubbuch, J. J. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00713 · Cited by 34
“This is ensured by a sufficiently high viscosity or the presence of a yield stress (Malda et al., 2013; Hölzl et al., 2016; Mouser et al., 2016).”
BackgroundEngineering Anisotropic Meniscus: Zonal Functionality and Spatiotemporal Drug Delivery
Abbadessa, A., Crecente‐Campo, J., & Alonso, M. J. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0096 · Cited by 33
“37 Finding an adequate balance between these two requirements has been one of the biggest challenges for researchers in the field.”
Mestre, R., García‐Urkía, N., Patiño, T., Guix, M., Fuentes, J., Valerio-Santiago, M., Almiñana, N., & Sánchez, S. (2021) · Biofabrication · doi:10.1088/1758-5090/ac165b · Cited by 33
Recent Advancements in 3D Printing and Bioprinting Methods for Cardiovascular Tissue Engineering
Kozaniti, F. K., Metsiou, D. N., Manara, A. E., Athanassiou, G., & Deligianni, D. D. (2021) · Bioengineering · doi:10.3390/bioengineering8100133 · Cited by 33
“Cell viability, proliferation and morphology after printing are crucially affected by characteristics of the selected bioink [19].”
BackgroundProgress in Bioengineering Strategies for Heart Regenerative Medicine
Häneke, T., & Sahara, M. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23073482 · Cited by 35
“Hydrogels also have several beneficial properties for the use in tissue engineering as follows: injectable fluid in a less invasive fashion [72], efficient transfer of oxygen and metabolites [73,74], ability to encapsulate cells and bioactive molecules [75], and providing casting molds of several geometries [40,76] an…”
BackgroundAlarçın, E., İzbudak, B., Yüce, E., Domingo, S., Tutar, R., Titi, K., Kocaağa, B., Güner, F. S., & Bal‐Öztürk, A. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37450 · Cited by 32
Progress in bioprinting technology for tissue regeneration
Sabzevari, A., Pisheh, H. R., Ansari, M., & Salati, A. (2023) · Journal of Artificial Organs · doi:10.1007/s10047-023-01394-z · Cited by 32
“Interesting development ensures that single and multiple cells join when distributed in biocompatible materials to form the desired 3D functional products [5–7].”
BackgroundShehzad, A., Mukasheva, F., Moazzam, M., Sultanova, D., Abdikhan, B., Trifonov, A., & Akilbekova, D. (2023) · Bioengineering · doi:10.3390/bioengineering10060704 · Cited by 33
“Although 3D bioprinting technology allowed significant progress in tissue engineering, the formulation of bioinks with appropriate physical and biological properties and cytocompatible gelation mechanisms presents substantial challenges [15].”
BackgroundCui, Y., Tan, M., Zhu, A., & Guo, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00095e · Cited by 33
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.