25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 701–800 of 1,002
Bio-based composite hydrogels for biomedical applications
Buwalda, S. J. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/ab80d6 · Cited by 63
Improving printability of a thermoresponsive hydrogel biomaterial ink by nanoclay addition
Hu, C., Hahn, L., Yang, M., Altmann, A., Stahlhut, P., Gröll, J., & Luxenhofer, R. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05190-5 · Cited by 62
“Alternatively, a few synthetic polymers, typically based on polyethylene glycol (PEG) [23, 24] and pluronic F127 [9, 25, 26] as well as their mixtures with naturally derived polymers, are utilized [10, 27, 28].”
BackgroundDouble network laminarin-boronic/alginate dynamic bioink for 3D bioprinting cell-laden constructs
Amaral, A. J. R., Gaspar, V. M., Lavrador, P., & Mano, J. F. (2021) · Biofabrication · doi:10.1088/1758-5090/abfd79 · Cited by 59
Chondrocyte-laden GelMA hydrogel combined with 3D printed PLA scaffolds for auricle regeneration
Tang, P., Song, P., Peng, Z., Zhang, B., Gui, X., Wang, Y., Liao, X., Chen, Z., Zhang, Z., Fan, Y., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112423 · Cited by 60
Development of Biocompatible 3D-Printed Artificial Blood Vessels through Multidimensional Approaches
Choi, J., Lee, E. J., Jang, W. B., & Kwon, S. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14100497 · Cited by 61
“Piston-driven systems provide more direct control over the flow of bioink, whereas pneumatic-based systems offer greater spatial control and can distribute bioink with higher viscosity [120,183,189].”
Backgrounddos Santos, V. I., Chevalier, J., Fredel, M. C., Henriques, B. A. P. D. C., & Grémillard, L. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100841 · Cited by 63
Kesti, M., Fisch, P., Pensalfini, M., Mazza, E., & Zenobi‐Wong, M. (2016) · BioNanoMaterials · doi:10.1515/bnm-2016-0004 · Cited by 63
“Bioink development is often considered to be the most challenging part of three-dimensional (3D) bioprinting due to the need to simultaneously optimize for high resolution printing, mechanical properties and biocompatibility [2].”
Background3D Printed Calcium Phosphate Cement (CPC) Scaffolds for Anti-Cancer Drug Delivery
Wu, Y., Woodbine, L. J., Carr, A. M., Pillai, A. R., Nokhodchi, A., & Maniruzzaman, M. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12111077 · Cited by 61
“A bone graft material that possesses tunable anti-cancer properties has numerous advantages over the current graft materials used in the clinic [21].”
BackgroundZheng, X.-Q., Huang, J., Lin, J., Zhu, Y., Wang, M., Guo, M.-L., Zan, X., & Wu, A. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111532 · Cited by 60
Bioprinted microvasculature: progressing from structure to function
Seymour, A. J., Westerfield, A. D., Cornelius, V., Skylar‐Scott, M. A., & Heilshorn, S. C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4fb5 · Cited by 59
“Because a successful biomaterial ink must optimize both structural integrity and cell viability [19], striking a balance between these opposing design constraints is central to the development of biomaterial inks and bioprinting strategies.”
Application and development of 3D bioprinting in cartilage tissue engineering
Li, M., Sun, D., Zhang, J., Wang, Y., Wei, Q., & Wang, Y. (2022) · Biomaterials Science · doi:10.1039/d2bm00709f · Cited by 62
Guo, W., Liu, C., Bu, W., Yang, Y., Guo, F., Li, J., Wang, E., Mao, Y., Mai, H., You, H., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.05.137 · Cited by 58
3D-bioprinting of self-healing hydrogels
Karvinen, J., & Kellomäki, M. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112864 · Cited by 60
“For example, there is a study [74] highlighting the benefits of bioinks with yield stress in maintaining shape fidelity and preventing cell sedimentation.”
BackgroundBottom-up biofabrication using microfluidic techniques
Nie, M., & Takeuchi, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aadef9 · Cited by 59
High resolution bioprinting of multi-component hydrogels
Zimmermann, R., Hentschel, C., Schrön, F., Moedder, D., Büttner, T., Atallah, P., Wegener, T., Gehring, T., Howitz, S., Freudenberg, U., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2aa1 · Cited by 57
Decellularized extracellular matrix bioinks and their application in skin tissue engineering
Khoshnood, N., & Zamanian, A. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00095 · Cited by 53
Trends in 3D bioprinting for esophageal tissue repair and reconstruction
Farhat, W., Chatelain, F., Marret, A., Faivre, L., Arakélian, L., Cattan, P., & Fuchs, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120465 · Cited by 59
Characterization of Biocompatibility of Functional Bioinks for 3D Bioprinting
Kim, J. (2023) · Bioengineering · doi:10.3390/bioengineering10040457 · Cited by 62
“The biofabrication window paradigm has frequently been used to design bioinks for 3D bioprinting, which describes the compromise between printability and biocompatibility within 3D printed constructs (Figure 1b) [40,41].”
MethodHydrogels for 3D Bioprinting Applications
Merceron, T. K., & Murphy, S. V. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00014-1 · Cited by 68
Hamlet, S. M., Vaquette, C., Shah, A., Hutmacher, D. W., & Ivanovski, S. (2016) · Journal Of Clinical Periodontology · doi:10.1111/jcpe.12686 · Cited by 57
“D bioprinting are showing considerable success (Malda et al. 2013, Obregon et al. 2015), however, maintaining the 3-”
BackgroundSelf-citationTerpstra, M. L., Li, J., Mensinga, A., de Ruijter, M., van Rijen, M. H. P., Androulidakis, C., Galiotis, C., Papantoniou, I., Matsusaki, M., Malda, J., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6282 · Cited by 58
Self-citationOptical elements from 3D printed polymers
Błachowicz, T., Ehrmann, G., & Ehrmann, A. (2021) · e-Polymers · doi:10.1515/epoly-2021-0061 · Cited by 55
Du, X., He, P., Wang, C., Wang, X., Mu, Y., & Guo, W. (2022) · Advanced Materials · doi:10.1002/adma.202206302 · Cited by 55
Polychronopoulos, N. D., & Brouzgou, A. (2024) · Catalysts · doi:10.3390/catal14020110 · Cited by 59
“They provide more flow control and are used for lower-viscosity inks [18].”
BackgroundOuyang, L., Burdick, J. A., & Sun, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19537 · Cited by 55
Sakai, S., Mochizuki, K., Qu, Y., Mail, M., Nakahata, M., & Taya, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadc9e · Cited by 55
Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues
Hauptstein, J., Forster, L., Nadernezhad, A., Gröll, J., Teßmar, J., & Blunk, T. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020924 · Cited by 58
“4%) and validated this ink as a beneficial cell carrier for cartilage biofabrication [36,37,43].”
BackgroundJeon, O., Lee, Y. B., Lee, S. J., Guliyeva, N., Lee, J., & Alsberg, E. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.025 · Cited by 58
3D Bioprinting tissue analogs: Current development and translational implications
Liu, S., Cheng, L., Liu, Y., Zhang, H., Song, Y., Park, J.-H., Dashnyam, K., Lee, J., Khalak, F. A.-H., Riester, O., et al. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231187113 · Cited by 57
“38 In other words, a restricted range of material properties is suitable for printability with high shape fidelity and supporting cell function, as shown in Figure 2(b).”
InfluentialSynthesis and application of sustainable vegetable oil-based polymers in 3D printing
Saraswat, R., Shagun, S., Dhir, A., Balan, A. S. S., Powar, S., & Doddamani, M. R. (2024) · RSC Sustainability · doi:10.1039/d4su00060a · Cited by 55
Wang, J., Li, Q., Yi, S., & Chen, X. (2017) · Soft Matter · doi:10.1039/c7sm01528c · Cited by 54
3D printing for cardiovascular tissue engineering: a review
Roy, A., Saxena, V., & Pandey, L. M. (2018) · Materials Technology · doi:10.1080/10667857.2018.1456616 · Cited by 56
Regenerative medicine and 3D bioprinting for human space exploration and planet colonisation
Ghidini, T. (2018) · Journal of Thoracic Disease · doi:10.21037/jtd.2018.03.19 · Cited by 57
“A number of very comprehensive reviews have been published and summarise all relevant technologies, possible materials and associated benefits and limitations (11,19-37).”
BackgroundHigh-strength hydrogel-based bioinks
Gao, F., Ruan, C., & Liu, W. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00373h · Cited by 55
Advanced Fabrication Techniques of Microengineered Physiological Systems
Puryear, J. R., Yoon, J., & Kim, Y. (2020) · Micromachines · doi:10.3390/mi11080730 · Cited by 56
“rogels with susp nd d cells are inserted into the syringes and extruded out using either pneumatic, piston, or screw driven methods [86].”
BackgroundMethodInfluentialKilian, D., Sembdner, P., Bretschneider, H., Ahlfeld, T., Mika, L., Lützner, J., Holtzhausen, S., Lode, A., Stelzer, R. H., & Gelinsky, M. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00153-4 · Cited by 54
Global Trends in Natural Biopolymers in the 21st Century: A Scientometric Review
Sun, Y., Bai, Y., Yang, W., Bu, K., Tanveer, S. K., & Hai, J. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.915648 · Cited by 59
“, 2012), biomedicine (tissue engineering, regenerative medicine, gene therapy, and controlled drug release) (Nair and Laurencin, 2007), and biochemistry (hydrogels to enhance bioactivation, cell survival, and tissue formation) (Malda et al., 2013).”
BackgroundBreakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future
Pandya, K. S., Shindalkar, S. S., & Kandasubramanian, B. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00399-7 · Cited by 55
“The temporary network is reestablished immediately once shear force is removed, and the plotted filament solidifies instantly (iii) reproduced with permissions from [19]”
BackgroundDrop‐On‐Drop Multimaterial 3D Bioprinting Realized by Peroxidase‐Mediated Cross‐Linking
Sakai, S., Ueda, K., Gantumur, E., Taya, M., & Nakamura, M. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700534 · Cited by 53
Wunner, F. M., Eggert, S., Maartens, J. H., Bas, O., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0149 · Cited by 60
Self-citationBiofabrication of bacterial nanocellulose scaffolds with complex vascular structure
Sämfors, S., Karlsson, K., Sundberg, J., Markstedt, K., & Gatenholm, P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2b4f · Cited by 57
Cell‐Instructive Multiphasic Gel‐in‐Gel Materials
Kühn, S., Sievers, J., Stoppa, A., Träber, N., Zimmermann, R., Welzel, P. B., & Werner, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908857 · Cited by 55
Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
Özalp, F., & Yilmaz, H. D. (2020) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-020-00370-4 · Cited by 53
Diverse and Productive Source of Biopolymer Inspiration: Marine Collagens
Fassini, D., Wilkie, I. C., Pozzolini, M., Ferrario, C., Sugni, M., Rocha, M. S., Giovine, M., Bonasoro, F., Silva, T. H., & Reis, R. L. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00013 · Cited by 54
Shaping collagen for engineering hard tissues: Towards a printomics approach
Maher, M., Castilho, M. D., Yue, Z., Glattauer, V., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.035 · Cited by 53
Kim, D., Kim, M., Lee, J., & Jang, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.764682 · Cited by 64
“Viscosity is a rheological property and refers to the generated fluid resistance when the applied force causes a flow (Malda et al., 2013; Cui et al., 2020).”
BackgroundApplication and Prospects of Hydrogel Additive Manufacturing
Zhao, C., Lv, Q., & Wu, W. (2022) · Gels · doi:10.3390/gels8050297 · Cited by 55
“With the gradual development of 3D printing technology, 3D bioprinting has emerged as the mainstream of current tissue engineering scaffold preparation [92].”
BackgroundEffect of varying cell densities on the rheological properties of the bioink
Majumder, N., Mishra, A., & Ghosh, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00241 · Cited by 52
“…process, rheological characterization of the proposed biomaterial in terms of viscosity, yield stress, time-dependent and independent viscoelastic properties, and gelation kinetics is directly interlinked with the mechanical stability and bioactivity of the polymer post extrusion [11,12].”
BackgroundGao, Q., Lee, J., Kim, B. S., & Gao, G. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.638 · Cited by 68
“, cell spheroids) • High viscosity bioinks (30 mPa·s‐6×107 mPa·s×107 mPa·s) • Medium cell viability (40% – 95%) • Low resolution (~100 μm) • Slow printing speed (~10 – 50 μm s-1) • High shear stress • Nozzle clogging [158-162]”
Designed peptide amphiphiles as scaffolds for tissue engineering
Sun, W., Gregory, D. A., & Zhao, X. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.102866 · Cited by 52
Balavigneswaran, C. K., Selvaraj, S., Vasudha, T. K., Saravanakumar, I., & Muthuvijayan, V. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213570 · Cited by 54
Guida, L., Cavallaro, M., & Levi, M. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00376 · Cited by 52
Zhang, Y., Li, X., Zhong, N., Huang, Y., He, K., & Ye, X. (2019) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2019.1618546 · Cited by 52
“Usually, physical crosslinking hydrogels exhibited the disadvantages of poor mechanical properties and relatively slow gelation [21,22], and conventional chemical crosslinked hydrogels need irradiation or toxic chemical crosslinkers to trigger chemical crosslinking, which limits their potential applications in biologi…”
Background3D‐Printed Biocompatible Scaffolds with Built‐In Nanoplasmonic Sensors
García‐Astrain, C., Lenzi, E., de Aberasturi, D. J., Henriksen‐Lacey, M., Binelli, M. R., & Liz‐Marzán, L. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005407 · Cited by 52
Bioprinting of Magnetically Deformable Scaffolds
Spangenberg, J., Kilian, D., Czichy, C., Ahlfeld, T., Lode, A., Günther, S., Odenbach, S., & Gelinsky, M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01371 · Cited by 52
Multiple Crosslinking Hyaluronic Acid Hydrogels with Improved Strength and 3D Printability
Wan, T., Fan, P., Zhang, M., Shi, K., Chen, X. D., Yang, H., Liu, X., Xu, W., & Zhou, Y. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01141 · Cited by 52
Current advances in three-dimensional tissue/organ printing
Park, J. H., Jang, J., Lee, J.-S., & Cho, D.-W. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-8111-8 · Cited by 51
Reinhardt, O., Ihmann, S., Ahlhelm, M., & Gelinsky, M. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1145177 · Cited by 41
“Extrusion bioprinting with bioinks, hydrogels containing living cells, is an established technique especially in the biomedical and tissue engineering field (Malda et al., 2013; Kilian et al., 2017; Valot et al., 2019; Ahlfeld et al., 2020), but there are also increasing applications in biotechnology (Krujatz et al.”
BackgroundPolymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review
Buriti, B. M. A. B., Figueiredo, P. L. B., Passos, M. F., & da Silva, J. K. R. (2024) · Pharmaceuticals · doi:10.3390/ph17070897 · Cited by 57
“Scaffolds are made of biomaterials and have a three-dimensional structure that supports and promotes cell development, an essential step in tissue regeneration [2,471,472].”
BackgroundExternally addressable hydrogel nanocomposites for biomedical applications
Campbell, S., & Hoare, T. R. (2014) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2013.12.003 · Cited by 53
Echalier, C., Levato, R., Mateos‐Timoneda, M. A., Castaño, Ó., Dejean, S., Garric, X., Pinese, C., Noël, D., Engel, E., Martínez, J., et al. (2017) · RSC Advances · doi:10.1039/c6ra28540f · Cited by 51
Cell-laden alginate dialdehyde–gelatin hydrogels formed in 3D printed sacrificial gel
Dranseike, D., Schrüfer, S., Schubert, D. W., Reakasame, S., & Boccaccini, A. R. (2020) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-020-06369-7 · Cited by 51
A pure molecular drug hydrogel for post-surgical cancer treatment
Qian, Q., Wang, D., Shi, L., Zhang, Z., Qian, J., Shen, J., Yu, C., & Zhu, X. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120403 · Cited by 53
Setayeshmehr, M., Hafeez, S., van Blitterswijk, C., Moroni, L., Mota, C., & Baker, M. B. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083901 · Cited by 51
“On the contrary, lower viscosity materials provide a less compact network and more permissive environment for cells but can suffer from low printability or structural integrity [7].”
BackgroundOpen-source hybrid 3D-bioprinter for simultaneous printing of thermoplastics and hydrogels
Koch, F., Thaden, O., Tröndle, K., Zengerle, R., Zimmermann, S., & Koltay, P. (2021) · HardwareX · doi:10.1016/j.ohx.2021.e00230 · Cited by 54
“This is particularly relevant in extrusion-based bioprinting, where a compromise needs to be found between cell viability and printability of the bioink by fine-tuning material and process parameters [4,5].”
BackgroundBioprinting Scaffolds for Vascular Tissues and Tissue Vascularization
Hauser, P. V., Chang, H.-M., Nishikawa, M., Kimura, H., Yanagawa, N., & Hamon, M. (2021) · Bioengineering · doi:10.3390/bioengineering8110178 · Cited by 60
Parvaresh, A., Izadi, Z., Nemati, H., Derakhshankhah, H., & Jaymand, M. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.121990 · Cited by 52
Krishna, D. V., & Sankar, M. R. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.07.002 · Cited by 50
Cellulose-based 3D printing bio-inks for biomedical applications: A review
Sharma, C., Raza, M. A., Purohit, S. D., Pathak, P., Gautam, S., Corridon, P. R., & Han, S. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141174 · Cited by 50
Three-dimensional bioprinting of volumetric tissues and organs
Kilian, D., Ahlfeld, T., Akkineni, A. R., Lode, A., & Gelinsky, M. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.164 · Cited by 52
Tsai, Y., Théato, P., Huang, C., & Hsu, S. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100778 · Cited by 53
Koch, F., Tröndle, K., Finkenzeller, G., Zengerle, R., Zimmermann, S., & Koltay, P. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00094 · Cited by 51
Composite Inks for Extrusion Printing of Biological and Biomedical Constructs
Ravanbakhsh, H., Bao, G., Luo, Z., Mongeau, L., & Zhang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01158 · Cited by 51
Advances in polymers for bio-additive manufacturing: A state of art review
Singh, N., & Singh, G. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.10.045 · Cited by 51
Engineering approaches for cardiac organoid formation and their characterization
Joddar, B., Natividad-Diaz, S. L., Padilla, A. E., Esparza, A., Ramirez, S. P., Chambers, D. R., & Ibaroudene, H. (2022) · Translational research · doi:10.1016/j.trsl.2022.08.009 · Cited by 51
Emerging trends in humidity-responsive 4D bioprinting
Mandal, A., & Chatterjee, K. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140550 · Cited by 51
3D Bioprinting in Otolaryngology: A Review
McMillan, A., McMillan, N., Gupta, N., Kanotra, S. P., & Salem, A. K. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203268 · Cited by 51
Vascularized adipose tissue engineering: moving towards soft tissue reconstruction
Peirsman, A., Nguyen, H. T., Waeyenberge, M. V., Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Kawakita, S., Vanlauwe, F., Tirpáková, Z., Dorpe, S. V., Damme, L. V., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acd7a5 · Cited by 52
Applications of Light-Based 3D Bioprinting and Photoactive Biomaterials for Tissue Engineering
Zhang, X., Zhang, X., Li, Y., & Zhang, Y. (2023) · Materials · doi:10.3390/ma16237461 · Cited by 51
Hsiao, L. C., Badruddoza, A. Z. M., Cheng, L., & Doyle, P. S. (2017) · Soft Matter · doi:10.1039/c6sm02208a · Cited by 49
Effective software solutions for 4D printing: A review and proposal
Chung, S., Song, S. E., & Cho, Y. T. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0041-y · Cited by 52
“59,60 At Harvard University in the US, the morphologies of flowers are fabricated by biomimetic 4D printing, 61 as in the example shown in Fig.”
MethodLiquid crystalline cellulose-based nematogels
Liu, Q., & Smalyukh, I. I. (2017) · Science Advances · doi:10.1126/sciadv.1700981 · Cited by 53
Development of a Self‐Assembled Peptide/Methylcellulose‐Based Bioink for 3D Bioprinting
Cofiño, C., Pérez‐Amodio, S., Semino, C. E., Engel, E., & Mateos‐Timoneda, M. A. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900353 · Cited by 49
Printing New Bones: From Print-and-Implant Devices to Bioprinted Bone Organ Precursors
Freeman, F. E., Burdis, R., & Kelly, D. J. (2021) · Trends in Molecular Medicine · doi:10.1016/j.molmed.2021.05.001 · Cited by 50
Silva, K. D., Kumar, P., van Vuuren, S. F., Pillay, V., & Choonara, Y. E. (2021) · ACS Omega · doi:10.1021/acsomega.1c01903 · Cited by 52
3-Dimensional spatially organized PEG-based hydrogels for an aortic valve co-culture model
Puperi, D. S., Balaoing, L. R., O’Connell, R. W., West, J. L., & Grande-Allen, K. J. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.039 · Cited by 51
“Recent rese arch 51 has demonstrated that a heterogeneous 3D culture sc affold can be constructed using additive 52 manufacturing[2,3], photopatterning[4], and/or laye ring techniques[5,6].”
3D inkjet printing of biomaterials: Principles and applications
Barui, S. (2021) · MEDICAL DEVICES & SENSORS · doi:10.1002/mds3.10143 · Cited by 48
Autonomous Control of Extrusion Bioprinting Using Convolutional Neural Networks
Kelly, D., Sergis, V., Blanco, L. V. I., Mason, K., & Daly, A. C. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202424553 · Cited by 57
The Design of Dextran‐Based Hypoxia‐Inducible Hydrogels via In Situ Oxygen‐Consuming Reaction
Park, K. M., Blatchley, M. R., & Gerecht, S. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400369 · Cited by 49
Microfluidic Bioprinting for Engineering Vascularized Tissues and Organoids
Zhang, Y. S., Pi, Q., & van Genderen, A. M. (2017) · Journal of Visualized Experiments · doi:10.3791/55957 · Cited by 52
Three-Dimensional Printing and Cell Therapy for Wound Repair
van Kogelenberg, S., Yue, Z., Dinoro, J., Baker, C., & Wallace, G. G. (2018) · Advances in Wound Care · doi:10.1089/wound.2017.0752 · Cited by 49
“4 For thermal printing, pressure pulses are created by electrically heating the print head.”
Biofabrication for osteochondral tissue regeneration: bioink printability requirements
Abdulghani, S., & Morouço, P. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6218-x · Cited by 48
Guo, Z., Xia, J., Mi, S., & Sun, W. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01864 · Cited by 48
Three-dimensional bioprinting of artificial blood vessel: Process, bioinks, and challenges
Hou, Y., Cui, X., Qin, Z., Su, C., Zhang, G., Tang, J., Li, J., & Zhang, J. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.740 · Cited by 48
“These features make Pluronic F-127 a promising support and scarified hydrogel[160,163].”
3D Miniaturization of Human Organs for Drug Discovery
Park, J., Wetzel, I., Dréau, D., & Cho, H. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700551 · Cited by 48
Bioprinting of Stem Cells: Interplay of Bioprinting Process, Bioinks, and Stem Cell Properties
Ding, S., Feng, L., Wu, J., Zhu, F., Tan, Z., & Yao, R. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00399 · Cited by 49
Fakhruddin, K., Hamzah, M. S. A., & Razak, S. I. A. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/440/1/012042 · Cited by 51
Recent advances in three‐dimensional bioprinting of stem cells
Eswaramoorthy, S. D., Ramakrishna, S., & Rath, S. N. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2839 · Cited by 48
“These include 3D bioprinting of cell‐laden hydrogels (Malda et al., 2013; Melchels et al., 2012), making polymer or paper meshes of cell‐laden hydrogels (Derda et al.”
BackgroundSwitching between Elasticity and Plasticity by Network Strength Competition
Ming, Z., Pang, Y., & Liu, J. (2019) · Advanced Materials · doi:10.1002/adma.201906870 · Cited by 49
Physical Confinement Impacts Cellular Phenotypes within Living Materials
Priks, H., Butelmann, T., Illarionov, A., Johnston, T. G., Fellin, C. R., Tamm, T., Nelson, A., Kumar, R., & Lahtvee, P. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00335 · Cited by 47
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.