25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 201–300 of 1,002
3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals
Serrano, D. R., Kara, A., Yuste, I., Luciano, F. C., Ongoren, B., Anaya, B. J., Molina, G., Diez, L., Ramirez, B. I., Ramirez, I. O., et al. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020313 · Cited by 192
“Wound healing is a complex process requiring a good equilibrium between cell proliferation, such as angiogenesis and re-ephitelisation, and healing rather than inflammation and scarring [93,94].”
Background3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
De Mori, A., Peña Fernández, M., Blunn, G., Tozzi, G., & Roldo, M. (2018) · Polymers · doi:10.3390/polym10030285 · Cited by 206
“The development of hydrogel inks suitable for bioprinting (both fabrication and cell culture), remains a challenge [105].”
BackgroundThiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
Advancing the field of 3D biomaterial printing
Jakus, A. E., Rutz, A. L., & Shah, R. N. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014102 · Cited by 203
“hydrogels, polymers, ceramics) for soft, hard, and vascularized tissues with or without the addition of cells [28].”
BackgroundEngineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Schöneberg, J., De Lorenzi, F., Theek, B., Blaeser, A., Rommel, D., Kuehne, A. J. C., Kießling, F., & Fischer, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-28715-0 · Cited by 196
(Photo-)crosslinkable gelatin derivatives for biofabrication applications
Van Hoorick, J., Tytgat, L., Dobos, A., Ottevaere, H., Van Erps, J., Thienpont, H., Ovsianikov, A., Dubruel, P., & Van Vlierberghe, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.035 · Cited by 192
“phenomenon as being one of the current paradoxes towards successful biofabrication of hydrogel materials [147].”
BackgroundWu, J., Pan, Z., Zhao, Z., Wang, M., Dong, L., Gao, H., Liu, C., Zhou, P., Chen, L., Shi, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200115 · Cited by 196
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 197
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala-Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y.-H., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 190
“major challenge in 3D bioprinting [19].”
Materials and technical innovations in 3D printing in biomedical applications
Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 196
3D Printing of Organs-On-Chips
Yi, H.-G., Lee, H., & Cho, D.-W. (2017) · Bioengineering · doi:10.3390/bioengineering4010010 · Cited by 193
“The cells encapsulated in the hydrogels are insulated from exogenous risk factors such as mechanical stress when passing through the printing nozzle, drying, and potential contaminating factors from the printing space [27,28].”
BackgroundMethodAdvances in the Biofabrication of 3D Skin in vitro: Healthy and Pathological Models
Randall, M. J., Jüngel, A., Rimann, M., & Wuertz-Kozak, K. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00154 · Cited by 194
“Initially, the scaffold materials used to bioprint hydrogels, with the ability to support 3D cell growth, included the natural polymers collagen I, alginate, or Matrigel R © (Malda et al., 2013), and thus the term “bioink” was coined.”
BackgroundMethodWang, L., Wu, Y., Hu, T., Ma, P. X., & Guo, B. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.035 · Cited by 198
Light-based vat-polymerization bioprinting
Levato, R., Dudaryeva, O., Garciamendez-Mijares, C. E., Kirkpatrick, B. E., Rizzo, R., Schimelman, J., Anseth, K. S., Chen, S., Zenobi-Wong, M., & Zhang, Y. S. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00231-0 · Cited by 176
Mirshafiei, M., Rashedi, H., Yazdian, F., Rahdar, A., & Baino, F. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112853 · Cited by 177
Pectin based food-ink formulations for 3-D printing of customizable porous food simulants
Vancauwenberghe, V., Katalagarianakis, L., Wang, Z., Meerts, M., Hertog, M., Verboven, P., Moldenaers, P., Hendrickx, M. E., Lammertyn, J., & Nicolaï, B. (2017) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2017.06.011 · Cited by 192
Spatially and temporally controlled hydrogels for tissue engineering
Leijten, J., Seo, J., Yue, K., Trujillo-de Santiago, G., Tamayol, A., Ruiz-Esparza, G. U., Shin, S. R., Sharifi, R., Noshadi, I., Álvarez, M. M., et al. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.07.001 · Cited by 192
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 188
Ding, A., Tang, F., & Alsberg, E. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00070 · Cited by 165
Scaffold-Based or Scaffold-Free Bioprinting: Competing or Complementing Approaches?
Ozbolat, I. T. (2015) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4030414 · Cited by 185
“There are two major approaches studied in the literature for biofabrication of tissues and organs: scaffold-based [6,7] and scaffold-free [8,9] bioprinting.”
BackgroundOoi, H. W., Hafeez, S., van Blitterswijk, C. A., Moroni, L., & Baker, M. B. (2017) · Mater. Horiz. · doi:10.1039/c7mh00373k · Cited by 189
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Brown, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 185
3D Printed Personalized Nerve Guide Conduits for Precision Repair of Peripheral Nerve Defects
Liu, K., Yan, L., Li, R., Song, Z., Ding, J., Liu, B., & Chen, X. (2022) · Advanced Science · doi:10.1002/advs.202103875 · Cited by 183
From cardiac tissue engineering to heart-on-a-chip: beating challenges
Zhang, Y. S., Aleman, J., Arneri, A., Bersini, S., Piraino, F., Shin, S. R., Dokmeci, M. R., & Khademhosseini, A. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034006 · Cited by 189
Nanoformulations in Pharmaceutical and Biomedical Applications: Green Perspectives
Petrovic, S., Bita, B., & Barbinta-Patrascu, M.-E. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25115842 · Cited by 168
Visser, J., Gawlitta, D., Benders, K. E. M., Toma, S. M. H., Pouran, B., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.020 · Cited by 187
“Nevertheless, hydrogels may be preferred over dry, (in)organic scaffolds, since their degradation profile is tailorable, biochemical cues can easily be incorporated to direct cell fate [20] and they allow for the fabrication of multiphasic constructs [21,22].”
Self-citationSuntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 183
Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review
Suntornnond, R., An, J., & Chua, C. K. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600266 · Cited by 180
Mohamed, M. A., Fallahi, A., El-Sokkary, A. M. A., Salehi, S., Akl, M. A., Jafari, A., Tamayol, A., Fenniri, H., Khademhosseini, A., Andreadis, S. T., et al. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101147 · Cited by 184
3D bioprinting: current status and trends—a guide to the literature and industrial practice
Santoni, S., Gugliandolo, S. G., Sponchioni, M., Moscatelli, D., & Colosimo, B. M. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00165-0 · Cited by 167
“Malda, Jos Utrecht University Netherlands Cartilage [217] Hydrogels [202] Cartilage, vascularization”
BackgroundInfluentialKumar, A., Kargozar, S., Baino, F., & Han, S. S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00313 · Cited by 189
“All these techniques follow the same coordinated spatial motion while differing in their ink-dispensing mechanisms (Malda et al., 2013).”
BackgroundRecent advances in 3D printing of tough hydrogels: A review
Zhang, X. N., Zheng, Q., & Wu, Z. L. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109895 · Cited by 183
Go with the flow: Rheological requirements for direct ink write printability
Wei, P., Cipriani, C., Hsieh, C.-M., Kamani, K., Rogers, S., & Pentzer, E. (2023) · Journal of Applied Physics · doi:10.1063/5.0155896 · Cited by 171
Fibre pulsing during melt electrospinning writing
Hochleitner, G., Youssef, A., Hrynevich, A., Haigh, J. N., Jungst, T., Groll, J., & Dalton, P. D. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0022 · Cited by 177
Self-citation3D bioprinting of structural proteins
Włodarczyk-Biegun, M. K., & del Campo, A. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.04.019 · Cited by 185
“Additionally, many natural based polymers have high molecular weights, leading to the formation of gels with relatively high viscosities at lower protein concentrations and reducing hindrance for cells when compared with synthetic biodegradable materials [27].”
BackgroundInfluentialLaser Photofabrication of Cell-Containing Hydrogel Constructs
Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182
Cell-laden microfluidic microgels for tissue regeneration
Jiang, W., Li, M., Chen, Z., & Leong, K. W. (2016) · Lab on a Chip · doi:10.1039/c6lc01193d · Cited by 177
Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
“in which their matrix deposition is not limited by the dense polymer network [129].”
BackgroundApplication of “Click” Chemistry in Biomedical Hydrogels
Li, X., & Xiong, Y. (2022) · ACS Omega · doi:10.1021/acsomega.2c03931 · Cited by 174
Vascularization Strategies in Bone Tissue Engineering
Simunovic, F., & Finkenzeller, G. (2021) · Cells · doi:10.3390/cells10071749 · Cited by 168
“The hydrogels need to exhibit high cytocompatibility, must be printable, and must provide a sufficient mechanical stability to the printed construct [105], where the integration of all these conditions is a major challenge in bioprinting.”
BackgroundFang, W., Yang, M., Wang, L., Li, W., Liu, M., Jin, Y., Wang, Y., Yang, R., Wang, Y., Zhang, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.759 · Cited by 200
“As early as 2013, an article was published, detailing the 3D printing methods of extrusion-based bioprinting, inkjet bioprinting, and laser-assisted bioprinting in conjunction with the 25th anniversary of biomanufacturing hydrogels (Figure 1A)[26].”
BackgroundHighly Conductive and Flexible Silver Nanowire-Based Microelectrodes on Biocompatible Hydrogel
Ahn, Y., Lee, H., Lee, D., & Lee, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504462f · Cited by 181
Tissue engineering with gellan gum
Stevens, L. R., Gilmore, K. J., Wallace, G. G., & in het Panhuis, M. (2016) · Biomaterials Science · doi:10.1039/c6bm00322b · Cited by 177
Saroia, J., Yanen, W., Wei, Q., Zhang, K., Lu, T., & Zhang, B. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0029-7 · Cited by 170
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Fully Printed Flexible Smart Hybrid Hydrogels
Zhou, Y., Layani, M., Wang, S., Hu, P., Ke, Y., Magdassi, S., & Long, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705365 · Cited by 177
Betsch, M., Cristian, C., Lin, Y., Blaeser, A., Schöneberg, J., Vogt, M., Buhl, E. M., Fischer, H., & Duarte Campos, D. F. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800894 · Cited by 173
3D Printing‐Based Hydrogel Dressings for Wound Healing
Zhou, X., Yu, X., You, T., Zhao, B., Dong, L., Huang, C., Zhou, X., Xing, M. M. Q., Qian, W., & Luo, G. (2024) · Advanced Science · doi:10.1002/advs.202404580 · Cited by 198
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Nanoengineered Osteoinductive Bioink for 3D Bioprinting Bone Tissue
Chimene, D., Miller, L., Cross, L. M., Jaiswal, M. K., Singh, I., & Gaharwar, A. K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19037 · Cited by 167
Bioactive inorganic particles‐based biomaterials for skin tissue engineering
Ma, J., & Wu, C. (2022) · Exploration · doi:10.1002/exp.20210083 · Cited by 168
Extracellular vesicles — new tool for joint repair and regeneration
Malda, J., Boere, J., van de Lest, C. H. A., van Weeren, P. R., & Wauben, M. H. M. (2016) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2015.170 · Cited by 167
Self-citationTuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior
Li, Z., Huang, S., Liu, Y., Yao, B., Hu, T., Shi, H., Xie, J., & Fu, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26407-3 · Cited by 164
Biomaterials and 3D Bioprinting Strategies to Model Glioblastoma and the Blood–Brain Barrier
Tang, M., Rich, J. N., & Chen, S. (2021) · Advanced Materials · doi:10.1002/adma.202004776 · Cited by 160
The role of three-dimensional printing in healthcare and medicine
Kholgh Eshkalak, S., Rezvani Ghomi, E., Dai, Y., Choudhury, D., & Ramakrishna, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108940 · Cited by 162
Zhang, J., Wehrle, E., Adamek, P., Paul, G. R., Qin, X.-H., Rubert, M., & Müller, R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.016 · Cited by 169
Wu, Y., Zeng, Y., Chen, Y., Li, C., Qiu, R., & Liu, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107202 · Cited by 170
Kiyotake, E. A., Douglas, A. W., Thomas, E. E., Nimmo, S. L., & Detamore, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.041 · Cited by 166
Gomes, D., Batista-Silva, J. P., Sousa, A., & Passarinha, L. A. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120782 · Cited by 163
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160
Essential steps in bioprinting: From pre- to post-bioprinting
Datta, P., Barui, A., Wu, Y., Ozbolat, V., Moncal, K. K., & Ozbolat, I. T. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.06.003 · Cited by 165
Microfluidic bioprinting for organ-on-a-chip models
Yu, F., & Choudhury, D. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2019.03.025 · Cited by 160
3D bioprinting of cell-laden electroconductive MXene nanocomposite bioinks
Rastin, H., Zhang, B., Mazinani, A., Hassan, K., Bi, J., Tung, T. T., & Losic, D. (2020) · Nanoscale · doi:10.1039/d0nr02581j · Cited by 166
Inorganic Strengthened Hydrogel Membrane as Regenerative Periosteum
Xin, T., Gu, Y., Cheng, R., Tang, J., Sun, Z., Cui, W., & Chen, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13167 · Cited by 169
Wu, D., Yu, Y., Tan, J., Huang, L., Luo, B., Lu, L., & Zhou, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.040 · Cited by 157
Biomimetic Architectures for Peripheral Nerve Repair: A Review of Biofabrication Strategies
Wieringa, P. A., Gonçalves de Pinho, A. R., Micera, S., van Wezel, R. J. A., & Moroni, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701164 · Cited by 160
Emmermacher, J., Spura, D., Cziommer, J., Kilian, D., Wollborn, T., Fritsching, U., Steingroewer, J., Walther, T., Gelinsky, M., & Lode, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7553 · Cited by 167
3D Printed Tissue Models: Present and Future
Jang, J., Yi, H.-G., & Cho, D.-W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00129 · Cited by 161
Porous Polyelectrolytes: The Interplay of Charge and Pores for New Functionalities
Zhang, W., Zhao, Q., & Yuan, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710272 · Cited by 165
Zandi, N., Sani, E. S., Mostafavi, E., Ibrahim, D. M., Saleh, B., Shokrgozar, M. A., Tamjid, E., Weiss, P. S., Simchi, A., & Annabi, N. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2020.120476 · Cited by 162
“Ideal bioinks should not only be capable to form mechanically stable 3D constructs, but also must protect cells through printing process and provide a suitable environment for remodeling into the target tissue [23].”
3D printing biomimetic materials and structures for biomedical applications
Zhu, Y., Joralmon, D., Shan, W., Chen, Y., Rong, J., Zhao, H., Xiao, S., & Li, X. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00117-0 · Cited by 158
Hyaluronic Acid Enhances the Mechanical Properties of Tissue-Engineered Cartilage Constructs
Levett, P. A., Hutmacher, D. W., Malda, J., & Klein, T. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0113216 · Cited by 160
Self-citationEvaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
“High density of hydrogel networks limits cell migration, growth and differentiation compared to a lower density [12].”
BackgroundInfluentialCritchley, S., Sheehy, E. J., Cunniffe, G., Diaz-Payno, P., Carroll, S. F., Jeon, O., Alsberg, E., Brama, P. A. J., & Kelly, D. J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.05.040 · Cited by 151
Aggarwal, S., Chakravarty, A., & Ikram, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.052 · Cited by 161
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Galarraga, J. H., Kwon, M. Y., & Burdick, J. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-56117-3 · Cited by 166
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Rastin, H., Ormsby, R. T., Atkins, G. J., & Losic, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00169 · Cited by 159
Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel
Devillard, C. D., & Marquette, C. A. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.721843 · Cited by 166
“Nevertheless, a wider variety of hydrogels exist and (Billiet et al., 2012; Malda et al., 2013) research is now focused on the development of complex, multifunctional biomaterials encapsulating proteins of interest to guide the formation of vascular tissue.”
BackgroundTailor-made conductive inks from cellulose nanofibrils for 3D printing of neural guidelines
Kuzmenko, V., Karabulut, E., Pernevik, E., Enoksson, P., & Gatenholm, P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.097 · Cited by 154
3D bioprinting applications in neural tissue engineering for spinal cord injury repair
Bedir, T., Ulag, S., Ustundag, C. B., & Gunduz, O. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110741 · Cited by 155
3D Bioprinting of Macroporous Materials Based on Entangled Hydrogel Microstrands
Kessel, B., Lee, M., Bonato, A., Tinguely, Y., Tosoratti, E., & Zenobi‐Wong, M. (2020) · Advanced Science · doi:10.1002/advs.202001419 · Cited by 160
Bioprinting and Differentiation of Stem Cells
Irvine, S., & Venkatraman, S. (2016) · Molecules · doi:10.3390/molecules21091188 · Cited by 150
“xtr sio io ri ti ( i re 2) as ee escri e as t e ost ro isi a roac as it allo s fa ricatio of organized constructs of clinically relevant sizes within a realistic time frame [9–12].”
Backgroundde Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. D., & Malda, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800418 · Cited by 168
Self-citationPark, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 165
Polyphenols as a versatile component in tissue engineering
Gao, X., Xu, Z., Liu, G., & Wu, J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.004 · Cited by 159
Theus, A. S., Ning, L., Hwang, B., Gil, C., Chen, S., Wombwell, A., Mehta, R., & Serpooshan, V. (2020) · Polymers · doi:10.3390/polym12102262 · Cited by 147
Boere, K. W. M., Visser, J., Seyednejad, H., Rahimian, S., Gawlitta, D., van Steenbergen, M. J., Dhert, W. J. A., Hennink, W. E., Vermonden, T., & Malda, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.041 · Cited by 164
Self-citationStichler, S., Bock, T. A., Paxton, N. C., Bertlein, S., Levato, R., Schill, V., Smolan, W., Malda, J., Teßmar, J., Blunk, T., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8cb7 · Cited by 171
Self-citationMaterials and manufacturing perspectives in engineering heart valves: a review
Oveissi, F., Naficy, S., Lee, A., Winlaw, D. S., & Dehghani, F. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100038 · Cited by 141
“In the majority of these cases, biofabrication has been used to generate cell-laden scaffolds where cells could be incorporated in the printed structure after the printing or during the course of fabrication [177].”
BackgroundAdditive Manufacturing of Conducting Polymers: Recent Advances, Challenges, and Opportunities
Criado‐Gonzalez, M., Dominguez‐Alfaro, A., Lopez‐Larrea, N., Alegret, N., & Mecerreyes, D. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00252 · Cited by 158
Jessop, Z. M., Al-Sabah, A., Gao, N., Kyle, S., Thomas, B., Badiei, N., Hawkins, K., & Whitaker, I. S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0631 · Cited by 146
Bioprinting Vasculature: Materials, Cells and Emergent Techniques
Tomasina, C., Bodet, T., Mota, C., Moroni, L., & Camarero-Espinosa, S. (2019) · Materials · doi:10.3390/ma12172701 · Cited by 145
“Moreover, each technique accounts for a different range of resolution, manufacturing time and design limitation [110,114].”
Zhang, X., Liu, Y., Luo, C., Zhai, C., Li, Z., Zhang, Y., Yuan, T., Dong, S., Zhang, J., & Fan, W. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111388 · Cited by 154
Next generation of heart regenerative therapies: progress and promise of cardiac tissue engineering
Tenreiro, M. F., Louro, A. F., Alves, P. M., & Serra, M. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00140-4 · Cited by 171
Hydrogels to model 3D in vitro microenvironment of tumor vascularization
Song, H.-H. G., Park, K. M., & Gerecht, S. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.06.002 · Cited by 153
“Hydrogels have been used widely as the bioink that encapsulates the cells due to their high biocompatibility and tunable viscosity that allows the maintenance of the printed tissue's structural integrity [116].”
MethodDubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 152
Exquisite design of injectable Hydrogels in Cartilage Repair
Wu, J., Chen, Q., Deng, C., Xu, B., Zhang, Z., Yang, Y., & Lu, T. (2020) · Theranostics · doi:10.7150/thno.46450 · Cited by 158
“Other physical crosslinking strategies involve fairly special mechanisms, such as stereocomplexation [7, 130].”
BackgroundRheological analysis of bio-ink for 3D bio-printing processes
Habib, M. A., & Khoda, B. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.02.048 · Cited by 161
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.