25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 301–400 of 1,002
Hassan, M., Dave, K., Chandrawati, R., Dehghani, F., & Gomes, V. G. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109340 · Cited by 146
Kilian, D., Ahlfeld, T., Akkineni, A. R., Bernhardt, A., Gelinsky, M., & Lode, A. (2020) · Scientific Reports · doi:10.1038/s41598-020-65050-9 · Cited by 157
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 154
Bioprinting of Collagen: Considerations, Potentials, and Applications
Lee, J. M., Suen, S. K. Q., Ng, W. L., Ma, W. C., & Yeong, W. Y. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202000280 · Cited by 141
Recent advances in 3D bioprinting of vascularized tissues
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zhao, H., Cai, Z., & Zhao, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109398 · Cited by 155
“Tomaintain a self-standing structure, inks with higher viscosities than those used in droplet-based printing are used [133].”
MethodResponsive biomaterials for 3D bioprinting: A review
Fu, Z., Ouyang, L., Xu, R., Yang, Y., & Sun, W. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.001 · Cited by 147
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Mirzaali, M. J., Moosabeiki, V., Rajaai, S. M., Zhou, J., & ZADPOOR, A. A. (2022) · Materials · doi:10.3390/ma15155457 · Cited by 155
“a construct, while bio-inks can provide a much softer scaffold, and the deposition of a new ECM can be replaced more quickly by the embedded cell population [198,217,260].”
BackgroundA Review: Tailor-made Hydrogel Structures (Classifications and Synthesis Parameters)
Singhal, R., & Gupta, K. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1050520 · Cited by 163
“However, biocompatibility can still be achieved by combining both physical and chemical cross-linking in a single hydrogel system([153]).”
BackgroundDynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 142
Coaxial bioprinting of cell-laden vascular constructs using a gelatin–tyramine bioink
Hong, S., Kim, J. S., Jung, B.-Y., Won, C. H., & Hwang, C. (2019) · Biomaterials Science · doi:10.1039/c8bm00618k · Cited by 152
hadad, A. A. E., Rosa-Sainz, A., Cañete, R., Peralta, E., Begines, B., Balbuena, M., Alcudia, A., & Torres, Y. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100760 · Cited by 157
Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells
Rimann, M., Bono, E., Annaheim, H., Bleisch, M., & Graf‐Hausner, U. (2015) · SLAS TECHNOLOGY · doi:10.1177/2211068214567146 · Cited by 156
Characterization and evaluation of 3D printed microfluidic chip for cell processing
Lee, J. M., Zhang, M., & Yeong, W. Y. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1688-8 · Cited by 152
“However, parameters associated with such cases are difficult to quantify, as a number of factors such as exposure time to stress, fluid viscosity, and physiology of the cells act to complicate the process (Malda et al. 2013).”
BackgroundRecent development and biomedical applications of self-healing hydrogels
Wang, Y., Adokoh, C. K., & Narain, R. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1360865 · Cited by 153
“‘bioinks’, as they can mimic or reproduce features of cellular environments [79].”
BackgroundProcessing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures
Wu, Q., Therriault, D., & Heuzey, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00415 · Cited by 156
Zhuang, P., Ng, W. L., An, J., Chua, C. K., & Tan, L. P. (2019) · PLoS ONE · doi:10.1371/journal.pone.0216776 · Cited by 151
Recent advances in 3D printing with protein-based inks
Mu, X., Agostinacchio, F., Xiang, N., Pei, Y., Khan, Y., Guo, C., Cebe, P., Motta, A., & Kaplan, D. L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101375 · Cited by 138
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering
Yu, J., Park, S. A., Kim, W. D., Ha, T., Xin, Y.-Z., Lee, J., & Lee, D. (2020) · Polymers · doi:10.3390/polym12122958 · Cited by 129
“Although inkjet-based bioprinters possess several advantages, such as high print speed and low cost [25], their application is limited because of the narrow ranges of printable biomaterial viscosities [17].”
BackgroundMethodSerrano‐Aroca, Á., Cano-Vicent, A., Serra, R. S. I., El‐Tanani, M., Aljabali, A. A. A., Tambuwala, M. M., & Mishra, Y. K. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100412 · Cited by 164
“2 mesh coating [55,56], self-assembly [57,58], membrane lamination [59, 60], freeze drying [1,61,62], 3D-printing [63–65] and bioprinting [66], among others [67].”
BackgroundMethod3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 143
3D Printed Neural Regeneration Devices
Joung, D., Lavoie, N., Guo, S., Park, S. H., Parr, A. M., & McAlpine, M. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906237 · Cited by 153
Recent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair
Rajabi, N., Rezaei, A. A., Kharaziha, M., Bakhsheshi‐Rad, H. R., Luo, H., Ramakrishna, S., & Berto, F. (2021) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0350 · Cited by 151
“70,99,126 On the other hand, GelMA is a temperature-sensitive polymer; thus, by reducing the temperature to 0 (cid:2) , GelMA hydrogel with self-healing and shear-thinning properties can be formed, and the printability of the structure increased.”
Granular Hydrogels in Biofabrication: Recent Advances and Future Perspectives
Daly, A. C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301388 · Cited by 156
Alginate modification via click chemistry for biomedical applications
Deng, Y., Shavandi, A., Okoro, O. V., & Nie, L. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118360 · Cited by 153
Design aspects and characterization of hydrogel-based bioinks for extrusion-based bioprinting
Karvinen, J., & Kellomäki, M. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00274 · Cited by 155
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 138
“No significant difference in cell viability was observed between the two types of constructs or among the three groups, which was consistent with previous studies [22].”
ResultVancauwenberghe, V., Baiye Mfortaw Mbong, V., Vanstreels, E., Verboven, P., Lammertyn, J., & Nicolai, B. (2019) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.12.003 · Cited by 141
Alginate-Based Bioinks for 3D Bioprinting and Fabrication of Anatomically Accurate Bone Grafts
Gonzalez‐Fernandez, T., Tenorio, A. J., Campbell, K. T., Silva, E. A., & Leach, J. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0305 · Cited by 149
“5,6 A wide range of natural and synthetic hydrogel bioinks with suitable rheological properties have been developed.”
InfluentialDirect Ink Writing of Materials for Electronics-Related Applications: A Mini Review
Hou, Z., Lu, H., Li, Y., Yang, L., & Gao, Y. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.647229 · Cited by 148
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Synthetic peptide hydrogels as 3D scaffolds for tissue engineering
Ding, X., Zhao, H., Li, Y., Lee, A. L., Li, Z., Fu, M., Li, C., Yang, Y. Y., & Yuan, P. (2020) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2020.10.005 · Cited by 147
Decarli, M. C., do Amaral, R. L. F., dos Santos, D. P., Tofani, L. B., Katayama, E. T., Rezende, R. A., da Silva, J. V. L., Swiech, K., Suazo, C. A. T., Mota, C., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/abe6f2 · Cited by 154
3D bioprinting of prevascularised implants for the repair of critically-sized bone defects
Nulty, J., Freeman, F. E., Browe, D. C., Burdis, R., Ahern, D. P., Pitacco, P., Lee, Y. B., Alsberg, E., & Kelly, D. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.003 · Cited by 134
Plant-Derived Biomaterials: A Review of 3D Bioprinting and Biomedical Applications
Jovic, T. H., Kungwengwe, G., Mills, A. C., & Whitaker, I. S. (2019) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2019.00019 · Cited by 132
Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs
Dalton, P. D., Woodfield, T. B. F., Mironov, V., & Groll, J. (2020) · Advanced Science · doi:10.1002/advs.201902953 · Cited by 133
Electrospun nanofiber/hydrogel composite materials and their tissue engineering applications
Zhang, M., Xu, S., Wang, R., Che, Y., Han, C., Feng, W., Wang, C., & Zhao, W. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.04.015 · Cited by 144
3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs
Knowlton, S., Yu, C. H., Ersoy, F., Emadi, S., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025019 · Cited by 135
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 132
Tissue and Organ 3D Bioprinting
Xia, Z., Jin, S., & Ye, K. (2018) · SLAS Technology · doi:10.1177/2472630318760515 · Cited by 128
Koch, L., Deiwick, A., Franke, A., Schwanke, K., Haverich, A., Zweigerdt, R., & Chichkov, B. (2018) · Biofabrication · doi:10.1088/1758-5090/aab981 · Cited by 130
Rheological evaluation of Laponite/alginate inks for 3D extrusion-based printing
Dávila, J. L., & d’Ávila, M. A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2876-y · Cited by 143
Preparing printable bacterial cellulose based gelatin gel to promote in vivo bone regeneration
Wang, X., Tang, S., Chai, S., Wang, P., Qin, J., Pei, W., Bian, H., Jiang, Q. Y., & Huang, C. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118342 · Cited by 141
Classification, processing, and applications of bioink and 3D bioprinting: A detailed review
Raees, S., Ullah, F., Javed, F. T., Akil, H. M., Khan, M. J., Safdar, M. M., Din, I. U., Alotaibi, M. A., Alharthi, A. I., Bakht, M. A., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123476 · Cited by 141
3D Printing of Ultratough Polyion Complex Hydrogels
Zhu, F., Cheng, L., Yin, J., Wu, Z. L., Qian, J., Fu, J., & Zheng, Q. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09881 · Cited by 131
Pati, F., Jang, J., Lee, J. W., & Cho, D. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00007-4 · Cited by 164
Bas, O., De‐Juan‐Pardo, E. M., Chhaya, M. P., Wunner, F. M., Jeon, J. E., Klein, T. J., & Hutmacher, D. W. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.034 · Cited by 148
Self-citationAbbadessa, A., Blokzijl, M. M., Mouser, V. H. M., Marica, P., Malda, J., Hennink, W. E., & Vermonden, T. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.080 · Cited by 135
Self-citationAbbadessa, A., Mouser, V. H. M., Blokzijl, M. M., Gawlitta, D., Dhert, W. J. A., Hennink, W. E., Malda, J., & Vermonden, T. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00366 · Cited by 131
Self-citation3D Printing and Bioprinting Nerve Conduits for Neural Tissue Engineering
Yu, X., Zhang, T., & Li, Y. (2020) · Polymers · doi:10.3390/polym12081637 · Cited by 142
“Secondly, the selection of biomaterials also affects cell adhesion, growth, proliferation, and even differentiation because the interaction between cells and matrix affects the direction of cell growth or differentiation [40].”
BackgroundCombined additive manufacturing approaches in tissue engineering
Giannitelli, S. M., Mozetic, P., Trombetta, M., & Rainer, A. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.032 · Cited by 135
Fabrication of Complex Hydrogel Structures Using Suspended Layer Additive Manufacturing (SLAM)
Senior, J. J., Cooke, M. E., Grover, L. M., & Smith, A. M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904845 · Cited by 141
Biomaterials for Bioprinting Microvasculature
Barrs, R. W., Jia, J., Silver, S. E., Yost, M. J., & Mei, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00027 · Cited by 140
Biodegradable Elastomers and Gels for Elastic Electronics
Chen, S., Wu, Z., Chu, C., Ni, Y., Neisiany, R. E., & You, Z. (2022) · Advanced Science · doi:10.1002/advs.202105146 · Cited by 138
Porous biomaterials for tissue engineering: a review
Maksoud, F. J., de la Paz, M. F. V., Hann, A. J., Thanarak, J., Reilly, G. C., Claeyssens, F., Green, N. H., & Zhang, Y. S. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02628c · Cited by 140
England, S., Rajaram, A., Schreyer, D. J., & Chen, D. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.12.001 · Cited by 139
Biofabrication and Bone Tissue Regeneration: Cell Source, Approaches, and Challenges
Orciani, M., Fini, M., Primio, R. D., & Mattioli‐Belmonte, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00017 · Cited by 148
“Indeed, even if hydrogels have been planned to furnish cells with a completely hydrated 3D environment similar to the natural ECM, their poor inherent mechanical strength limits their use in 3D biofabricated bone tissue-engineered constructs (Malda et al., 2013).”
BackgroundAssembling Living Building Blocks to Engineer Complex Tissues
Ouyang, L., Armstrong, J. P. K., Salmeron‐Sanchez, M., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909009 · Cited by 124
Multi-material 3D bioprinting of porous constructs for cartilage regeneration
Ruiz‐Cantu, L., Gleadall, A., Faris, C., Segal, J. I., Shakesheff, K. M., & Yang, J. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110578 · Cited by 136
Wei, J., Wang, B., Li, Z., Wu, Z., Zhang, M., Sheng, N., Liang, Q., Wang, H., & Chen, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116207 · Cited by 138
Xu, J., Zheng, S., Hu, X., Li, L., Li, W., Parungao, R., Wang, Y., Nie, Y., Liu, T., & Song, K. (2020) · Polymers · doi:10.3390/polym12061237 · Cited by 124
3D printing of bio-instructive materials: Toward directing the cell
Zieliński, P. S., Gudeti, P. K. R., Rikmanspoel, T., & Włodarczyk‐Biegun, M. K. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.04.008 · Cited by 145
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 158
3D Printing of Silk Fibroin for Biomedical Applications
Wang, Q., Han, G., Yan, S., & Zhang, Q. (2019) · Materials · doi:10.3390/ma12030504 · Cited by 131
“5–12 mPas−1) behave in inkjet printing better than extrude printing (about 600 kPas−1) [91,92], and the large mechanical stress that is applied to extrude the bioink resulting in the reduction of cell survival.”
BackgroundHauptstein, J., Bock, T. A., Bartolf‐Kopp, M., Forster, L., Stahlhut, P., Nadernezhad, A., Blahetek, G., Zernecke, A., Detsch, R., Jüngst, T., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000737 · Cited by 139
Self-citation3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries
Ramadan, Q., & Zourob, M. M. (2021) · Frontiers in Medical Technology · doi:10.3389/fmedt.2020.607648 · Cited by 142
Recent advances in 3D printing: vascular network for tissue and organ regeneration
Hann, S.-Y., Cui, H., Esworthy, T. J., Miao, S., Zhou, X., Lee, S., Fisher, J. P., & Zhang, L. G. (2019) · Translational research · doi:10.1016/j.trsl.2019.04.002 · Cited by 130
“, the printability of bioinks is proportional to polymer concentration, which affects crosslinkability and shape fidelity for 3D printing of vascular networks (25, 26).”
BackgroundZhu, H., Monavari, M., Zheng, K., Distler, T., Ouyang, L., Heid, S., Jin, Z., He, J., Li, D., & Boccaccini, A. R. (2022) · Small · doi:10.1002/smll.202104996 · Cited by 138
Barata, D. B., van Blitterswijk, C., & Habibović, P. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.009 · Cited by 136
You, F., Wu, X., Zhu, N., Lei, M., Eames, B. F., & Chen, X. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00258 · Cited by 121
Rizwan, M., Chan, S. W., Comeau, P., Willett, T. L., & Yim, E. K. F. (2020) · Biomedical Materials · doi:10.1088/1748-605x/aba40c · Cited by 128
Yadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 135
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2017) · Materials · doi:10.3390/ma10020190 · Cited by 130
“A 30-min printing window is considered reasonable as a long printing process window may have adverse effects on the cell viability [40,41].”
Background3D printing strategies for peripheral nerve regeneration
Petcu, E. B., Midha, R., McColl, E., Popa‐Wagner, A., Chirilă, T. V., & Dalton, P. D. (2018) · Biofabrication · doi:10.1088/1758-5090/aaaf50 · Cited by 133
Admane, P. S., Gupta, A., Jois, P., Roy, S., Lakshmanan, C. C., Kalsi, G., Bandyopadhyay, B., & Ghosh, S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00051 · Cited by 130
Hydrogel microfabrication technology toward three dimensional tissue engineering
Yanagawa, F., Sugiura, S., & Kanamori, T. (2016) · Regenerative Therapy · doi:10.1016/j.reth.2016.02.007 · Cited by 138
“In most cases, the most important factor is the selection of a suitable material for each approach [27].”
BackgroundMouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 121
“high yield stress and viscosity, while for cell encapsulation and optimal tissue production by embedded cells, low yield stresses and viscosities are favorable [10, 11].”
BackgroundSelf-citationEngineering inkjet bioprinting processes toward translational therapies
Angelopoulos, I., Allenby, M. C., Lim, M., & Zamorano, M. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27176 · Cited by 122
Constante, G., Apsite, I., Alkhamis, H., Dulle, M., Schwarzer, M., Caspari, A., Synytska, A., Salehi, S., & Ionov, L. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18608 · Cited by 130
Cunniffe, G. M., Gonzalez‐Fernandez, T., Daly, A. C., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0498 · Cited by 128
“14,15 Another attractive feature of this spatial control is the ability to deposit specific biological cues in relevant locations, to drive complex tissue formation.”
Bioactive polymeric scaffolds for osteogenic repair and bone regenerative medicine
Amiryaghoubi, N., Fathi, M., Pesyan, N. N., Samiei, M., Barar, J., & Omidi, Y. (2020) · Medicinal Research Reviews · doi:10.1002/med.21672 · Cited by 123
Stimulus-Responsive Hydrogels for Targeted Cancer Therapy
Solanki, R., & Bhatia, D. D. (2024) · Gels · doi:10.3390/gels10070440 · Cited by 138
“…have emerged as fascinating drug delivery materials because of their distinct characteristics One of their primary advantages is their high-water content, which replicates the natural environment of biological tissues, enhancing compatibility and decreasing discomfort during administration [24].”
BackgroundMechanically Tunable Bioink for 3D Bioprinting of Human Cells
Forget, A., Blaeser, A., Mießmer, F., Köpf, M., Campos, D. F. D., Voelcker, N. H., Blencowe, A., Fischer, H., & Shastri, V. P. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700255 · Cited by 132
Bao, W., Li, M., Yang, Y., Wan, Y., Wang, X., Bi, N., & Li, C. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00053 · Cited by 132
“To achieve the perfectible regeneration of damaged cartilage, it is essential to offer the biodegradable scaffolds, simulate local characteristics of specific tissues, transport the tissue cells and growth factors, and provide supports to newly formed tissues (Malda et al., 2013).”
BackgroundAhlfeld, T., Gudurić, V., Duin, S., Akkineni, A. R., Schütz, K., Kilian, D., Emmermacher, J., Mateo, N. C., Dani, S., von Witzleben, M., et al. (2020) · Biomaterials Science · doi:10.1039/d0bm00027b · Cited by 129
Optimizing cell viability in droplet-based cell deposition
Hendriks, J., Visser, C. W., Henke, S., Leijten, J., Saris, D. B. F., Sun, C., Lohse, D., & Karperien, M. (2015) · Scientific Reports · doi:10.1038/srep11304 · Cited by 127
Printable hybrid hydrogel by dual enzymatic polymerization with superactivity
Wei, Q., Xu, M., Liao, C., Wu, Q., Liu, M., Zhang, Y., Wu, C., Cheng, L., & Wang, Q. (2016) · Chemical Science · doi:10.1039/c5sc02234g · Cited by 123
Kreimendahl, F., Köpf, M., Thiebes, A. L., Duarte Campos, D. F., Blaeser, A., Schmitz-Rode, T., Apel, C., Jockenhoevel, S., & Fischer, H. (2017) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2017.0234 · Cited by 120
Huang, J., Huang, Z., Liang, Y., Yuan, W., Bian, L., Duan, L., Rong, Z., Xiong, J., Wang, D., & Xia, J. (2021) · Biomaterials Science · doi:10.1039/d0bm02103b · Cited by 120
3D Cell Printed Tissue Analogues: A New Platform for Theranostics
Choi, Y.-J., Yi, H.-G., Kim, S.-W., & Cho, D.-W. (2017) · Theranostics · doi:10.7150/thno.19396 · Cited by 121
“The biofabrication window is a concept that describes the compromise between the physical and biological properties of a bioink [43].”
BackgroundHighly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 129
Properties of 3D-Printed Fiber-Reinforced Portland Cement Paste
Hambach, M., Rutzen, M., & Volkmer, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00005-1 · Cited by 159
Naranjo-Alcazar, R., Bendix, S., Groth, T., & Ferrer, G. G. (2023) · Gels · doi:10.3390/gels9030230 · Cited by 127
“For instance, cyclodextrins have been used for studying the solubilization of hydrophobic drugs thanks to their hydrophobic internal cavity [25].”
BackgroundProcesses and materials used for direct writing technologies: A review
Balani, S. B., Ghaffar, S. H., Chougan, M., Pei, E., & Şahin, E. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100257 · Cited by 128
The 3D Bioprinted Scaffolds for Wound Healing
Antezana, P. E., Municoy, S., Echazú, M. I. A., Santo‐Orihuela, P. L., Catalano, P. N., Al‐Tel, T. H., Kadumudi, F. B., Dolatshahi‐Pirouz, A., Orive, G., & Desimone, M. F. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020464 · Cited by 125
4D Printing: The Development of Responsive Materials Using 3D-Printing Technology
Antezana, P. E., Municoy, S., Ostapchuk, G. O., Catalano, P. N., Hardy, J. G., Evelson, P., Orive, G., & Desimone, M. F. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15122743 · Cited by 129
“Lastly, materials may lead to nozzle clogging, presenting an additional challenge [37,38].”
BackgroundRaja, N., & Yun, H.-S. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00849f · Cited by 113
Yan, Y., Cheng, B., Chen, K., Cui, W., Qi, J., Li, X., & Deng, L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801043 · Cited by 122
Advances in 3D skin bioprinting for wound healing and disease modeling
Zhang, M., Zhang, C., Li, Z., Fu, X., & Huang, S. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac105 · Cited by 128
“Viscosity is one of the basic parameters to evaluate the rheological properties of biomaterials, it refers to the resistance of a fluid to flow upon application of stress [55, 56].”
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.