25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 601–700 of 1,002
Meniscus regeneration by 3D printing technologies: Current advances and future perspectives
Stocco, E., Porzionato, A., Rose, E. D., Barbon, S., De, R., & Macchi, V. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314211065860 · Cited by 78
Koch, F., Thaden, O., Conrad, S., Tröndle, K., Finkenzeller, G., Zengerle, R., Kartmann, S., Zimmermann, S., & Koltay, P. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105219 · Cited by 77
Tuning the Degradation Rate of Alginate-Based Bioinks for Bioprinting Functional Cartilage Tissue
Barceló, X., Eichholz, K. F., Garcia, O., & Kelly, D. J. (2022) · Biomedicines · doi:10.3390/biomedicines10071621 · Cited by 81
“These polymeric matrices are expected to provide a conducive environment for the cells to proliferate and differentiate [3,4].”
BackgroundA comprehensive review on fresh and rheological properties of 3D printable cementitious composites
Rahman, M., Rawat, S., Yang, R. D., Mahil, A. M. M., & Zhang, Y. X. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109719 · Cited by 96
Yeo, M., & Kim, G. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21163k · Cited by 73
Aggas, J. R., Abasi, S., Phipps, J. F., Podstawczyk, D. A., & Guiseppi‐Elie, A. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112568 · Cited by 76
3D Bioprinting and its application to organ-on-a-chip
Park, J. Y., Jang, J., & Kang, H. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.08.004 · Cited by 79
Bioprinting of kidney in vitro models: cells, biomaterials, and manufacturing techniques
Fransen, M. F. J., Addario, G., Bouten, C. V. C., Halary, F. A., Moroni, L., & Mota, C. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200158 · Cited by 79
3D bioprinting: Materials, processes, and applications
Bártolo, P., Malshe, A. P., Ferraris, E., & Koç, B. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.06.001 · Cited by 77
Zhang, M., Song, C., Du, F., & Li, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08372 · Cited by 75
Human platelet lysate-based nanocomposite bioink for bioprinting hierarchical fibrillar structures
Mendes, B. B., Gómez‐Florit, M., Hamilton, A. G., Detamore, M. S., Domingues, R. M. A., Reis, R. L., & Gomes, M. E. (2019) · Biofabrication · doi:10.1088/1758-5090/ab33e8 · Cited by 72
“2 and/or cells, are often limited to the “biofabrication window”, in which the proposed hydrogel inks cannot be printed with high resolution and under cytocompatible conditions, delaying the clinical translation of personalized bioprinted structures.[3, 4] The main limitations of traditional hydrogelbased bioinks are…”
BackgroundReview of extrusion-based multi-material bioprinting processes
Betancourt, N., & Chen, D. (2022) · Bioprinting · doi:10.1016/j.bprint.2021.e00189 · Cited by 77
Pu, X., Wu, Y., Liu, J., & Wu, B. (2024) · Chem & Bio Engineering · doi:10.1021/cbe.4c00024 · Cited by 77
Akkineni, A. R., Ahlfeld, T., Funk, A., Waske, A., Lode, A., & Gelinsky, M. (2016) · Polymers · doi:10.3390/polym8050170 · Cited by 72
“fidelity could be improved by using higher concentrations of the biopolymer which results in an increase of viscosity [14].”
BackgroundMethodInfluentialThree-dimensional bio-printing: A new frontier in oncology research
Charbe, N. B., McCarron, P. A., & Tambuwala, M. M. (2017) · World Journal of Clinical Oncology · doi:10.5306/wjco.v8.i1.21 · Cited by 78
3D printing for clinical application in otorhinolaryngology
Zhong, N., & Zhao, X. (2017) · European Archives of Oto-Rhino-Laryngology · doi:10.1007/s00405-017-4743-0 · Cited by 76
Polysaccharide hydrogels for multiscale 3D printing of pullulan scaffolds
Giustina, G. D., Gandin, A., Brigo, L., Panciera, T., Giulitti, S., Sgarbossa, P., D’Alessandro, D., Trombi, L., Danti, S., & Brusatin, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107566 · Cited by 73
Sarker, M. D., Naghieh, S., McInnes, A. D., Ning, L., Schreyer, D. J., & Chen, D. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00045 · Cited by 75
Digital light processing (DLP) in tissue engineering: from promise to reality, and perspectives
Gong, J., Qian, Y., Lu, K., Zhu, Z., Siow, L., Zhang, C., Zhou, S., Gu, T., Yin, J., Yu, M., et al. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac96ba · Cited by 73
“The emerging technology has been widely used in tissue engineering [6], electronic devices [7], soft robots [8], and high-performance material manufacturing [9].”
Bioprinting a 3D vascular construct for engineering a vessel-on-a-chip
Abudupataer, M., Chen, N., Yan, S., Alam, M. F., Shi, Y., Wang, L., Lai, H., Li, J., Zhu, K., & Wang, C. (2019) · Biomedical Microdevices · doi:10.1007/s10544-019-0460-3 · Cited by 71
“To overcome the problem that gelatin cannot stay in a gel at a normal cell culture temperature (37 °C), some additives are used, and gelatin-methacrylate (GelMA) hydrogels have been studied to maintain the 3D morphology of the printed structure via UV-mediated polymerization (Malda et al. 2013).”
MethodHamid, O. A., Eltaher, H. M., Sottile, V., & Yang, J. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111707 · Cited by 72
3D bioprinting of dual-crosslinked nanocellulose hydrogels for tissue engineering applications
Monfared, M., Mawad, D., Rnjak‐Kovacina, J., & Stenzel, M. H. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00624j · Cited by 70
Bakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Three-dimensional cell-based bioprinting for soft tissue regeneration
Kim, J. H., Yoo, J. J., & Lee, S. J. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0133-8 · Cited by 72
Li, H., Tan, Y. J., & Li, L. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.081 · Cited by 70
Krishnamoorthy, S., Zhang, Z., & Xu, C. (2019) · Journal of Biomaterials Applications · doi:10.1177/0885328218823329 · Cited by 77
Bessler, N., Ogiermann, D., Buchholz, M., Santel, A., Heidenreich, J., Ahmmed, R., Zaehres, H., & Brand‐Saberi, B. (2019) · HardwareX · doi:10.1016/j.ohx.2019.e00069 · Cited by 72
Three dimensional bioprinting technology: Applications in pharmaceutical and biomedical area
Koçak, E., Yıldız, A., & Acartürk, F. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111396 · Cited by 75
Dynamic hydrogels for biofabrication: A review
Xu, R., Ooi, H. S., Bian, L., Ouyang, L., & Sun, W. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123266 · Cited by 74
Biofabrication of reinforced 3D-scaffolds using two-component hydrogels
Boere, K. W. M., Blokzijl, M. M., Visser, J., Linssen, J. E. A., Malda, J., Hennink, W. E., & Vermonden, T. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01645b · Cited by 76
Self-citationA new photocrosslinkable polycaprolactone‐based ink for three‐dimensional inkjet printing
He, Y., Tuck, C. J., Prina, E., Kilsby, S., Christie, S. D. R., Edmondson, S., Hague, R., Rose, F. R. A. J., & Wildman, R. D. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33699 · Cited by 69
“Material synthesis 3D inkjet printing requires a relatively low viscosity ink for jetting, but in order to form 3D structures, the printed ink needs to be able to solidify or cure quickly following deposition to prevent spreading.(34) A method of inducing curing is the use of Ultraviolet (UV) light.”
MethodThermally Stable Cellulose Nanocrystals toward High-Performance 2D and 3D Nanostructures
Jia, C., Bian, H., Gao, T., Jiang, F., Kierzewski, I. M., Wang, Y., Yao, Y., Chen, L., Shao, Z., Zhu, J. Y., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08760 · Cited by 69
Krujatz, F., Lode, A., Seidel, J., Bley, T., Gelinsky, M., & Steingroewer, J. (2017) · New Biotechnology · doi:10.1016/j.nbt.2017.09.001 · Cited by 76
“The challenge of using 3D-bioprinting in biotechnological applications is to find processing conditions for the hydrogel that allow the fabrication of 3Dstructures while maintaining a high survival rate among the embedded cells [81].”
BackgroundKirsch, M., Birnstein, L., Pepelanova, I., Handke, W., Rach, J., Seltsam, A. W., Scheper, T. H., & Lavrentieva, A. V. (2019) · Bioengineering · doi:10.3390/bioengineering6030076 · Cited by 71
“However, even higher viscosities are usually required for high fidelity extrusion bioprinting [76].”
BackgroundLorson, T., Ruopp, M., Nadernezhad, A., Eiber, J., Vogel, U. F., Jüngst, T., & Lühmann, T. C. (2020) · ACS Omega · doi:10.1021/acsomega.9b04096 · Cited by 68
Self-citationAchang, M., Li, Y., & Radonjic, M. (2020) · Environmental Engineering Science · doi:10.1089/ees.2019.0333 · Cited by 68
“This method allows for the fabrication of complex shapes and structures through computer-aided design (Malda et al., 2013).”
Biomechanical factors in three-dimensional tissue bioprinting
Ning, L., Gil, C. J., Hwang, B., Theus, A. S., Perez, L., Tomov, M. L., Bauser‐Heaton, H. D., & Serpooshan, V. (2020) · Applied Physics Reviews · doi:10.1063/5.0023206 · Cited by 69
Wang, X., Zhang, Y., Luo, J., Xu, T., Si, C., Cárdenas‐Oscanoa, A. J., Tang, D., Zhu, L., Wang, P., & Huang, C. (2023) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-023-00711-7 · Cited by 69
“The mechanical properties of biomaterials in tissue engineering were essential to support the structural integrity of new tissues and further provide the spatial environment required for cell growth [45].”
BackgroundChallenges and Prospects of Plant-Protein-Based 3D Printing
Mittal, S., Bhuiyan, M. H. R., & Ngadi, M. O. (2023) · Foods · doi:10.3390/foods12244490 · Cited by 72
Fabrication and challenges of 3D printed sensors for biomedical applications-Comprehensive review
S, J. H. K., Subramaniam, M. P., T, M. K. K., Sreeram, P., Parvathi, S., Sari, P. S., Pullanchiyodan, A., Mulhivill, D. M., & Raghavan, P. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.101867 · Cited by 71
Dynamic peptide-folding mediated biofunctionalization and modulation of hydrogels for 4D bioprinting
Aronsson, C., Jury, M., Naeimipour, S., Boroojeni, F. R., Christoffersson, J., Lifwergren, P., Mandenius, C., Selegård, R., & Aili, D. (2020) · Biofabrication · doi:10.1088/1758-5090/ab9490 · Cited by 69
“In addition, HA is abundant in the ECM of the heart where it is involved in cardiac development during embryogenesis and healing after myocardial infarction, for example [53].”
BackgroundInfluentialBioprinting in ophthalmology: current advances and future pathways
Poomathi, N., Singh, S., Prakash, C., Patil, R. V., Perumal, P. T., Barathi, V. A., Balasubramanian, K. K., Ramakrishna, S., & Maheshwari, N. U. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2018-0144 · Cited by 69
Lin, Y., Wang, L., Zhou, J., Ye, L., Hu, H., Luo, Z., & Zhou, L. (2018) · Polymer · doi:10.1016/j.polymer.2018.12.026 · Cited by 67
Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications
Maiz–Fernández, S., Pérez‐Álvarez, L., Ruiz‐Rubio, L., Vilas‐Vilela, J. L., & Lanceros-Méndez, S. (2020) · Polymers · doi:10.3390/polym12102261 · Cited by 68
“The main goal of tissue engineering is the restoration of degenerated or damaged tissues, being the materials used capable to mimic, until certain degree, the native tissue in order to restore its functionally and structure [116].”
Background3D Patterning within Hydrogels for the Recreation of Functional Biological Environments
Primo, G. A., & Mata, Á. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009574 · Cited by 69
Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks
DeSimone, E., Schacht, K., Jungst, T., Groll, J., & Scheibel, T. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2015-0106 · Cited by 61
Self-citationA Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds
Ahlfeld, T., Köhler, T., Czichy, C., Lode, A., & Gelinsky, M. (2018) · Gels · doi:10.3390/gels4030068 · Cited by 69
“Hydrogels have been developed for several applications of 3D plotting and their viscoelastic properties make them ideal for usage not just as bioink but also as cell-free support ink [9].”
BackgroundDoryab, A., Taş, S., Taskin, M. B., Yang, L., Hilgendorff, A., Gröll, J., Wagner, D. E., & Schmid, O. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903114 · Cited by 70
Pössl, A., Hartzke, D., Schmidts, T., Runkel, F., & Schlupp, P. (2021) · Biofabrication · doi:10.1088/1758-5090/abde1e · Cited by 71
Garcia-Cruz, M. R., Postma, A., Frith, J. E., & Meagher, L. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2d · Cited by 67
“Increasing the XG and XGMA-GelMA concentration increased the hydrogel storage modulus (figure 3(a)-III)), as a result of an increase in physical cross-linking density and viscosity of the solu-tion [53].”
Ferreira, F. V., Souza, A. G., Ajdary, R., de Souza, L. P., Lopes, J. H., Correa, D. S., Siqueira, G. D. F., Barud, H. D. S., Rosa, D. D. S., Mattoso, L. H. C., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.020 · Cited by 86
“, gelation and drying) are some of the main aspects to consider in the preparation of nanocellulose-based aerogels or porous materials by 3D printing [96].”
Background4D Biofabrication: 3D Cell Patterning Using Shape‐Changing Films
Stroganov, V., Pant, J., Stoychev, G. V., Janke, A., Jehnichen, D., Fery, A., Handa, H., & Ionov, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706248 · Cited by 66
3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 68
He, Y., Derakhshanfar, S., Zhong, W., Li, B., Lu, F., Xing, M. M. Q., & Li, X. (2020) · Journal of Nanomaterials · doi:10.1155/2020/2057097 · Cited by 74
“Rheology, which is the study of flow of matter under external forces, is notably important in bioprinting and biofabrication [1].”
BackgroundMethodBioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink
Skardal, A., Devarasetty, M., Kang, H.-W., Seol, Y.-J., Forsythe, S. D., Bishop, C., Shupe, T., Soker, S., & Atala, A. (2016) · Journal of Visualized Experiments · doi:10.3791/53606 · Cited by 65
A Novel Poly(amido amine)‐Dendrimer‐Based Hydrogel as a Mimic for the Extracellular Matrix
Wang, Y., Zhao, Q., Zhang, H., Yang, S. L., & Jia, X. (2014) · Advanced Materials · doi:10.1002/adma.201400323 · Cited by 67
Correia, C. R., Nadine, S., & Mano, J. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908061 · Cited by 67
Rau, D. A., Forgiarini, M., & Williams, C. B. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101996 · Cited by 76
Ionic Hydrogel Sensors toward Next‐Gen Personalized Healthcare
Sun, Y., Tian, G., Deng, W., & Yang, W. (2025) · Advanced Materials · doi:10.1002/adma.202509122 · Cited by 85
Bioprinting Living Biofilms through Optogenetic Manipulation
Huang, Y., Xia, A., Yang, G., & Jin, F. (2018) · ACS Synthetic Biology · doi:10.1021/acssynbio.8b00003 · Cited by 68
Singh, A. V., Ansari, M. H. D., Wang, S., Laux, P., Luch, A., Kumar, A., Patil, R., & Nußberger, S. (2019) · Applied Sciences · doi:10.3390/app9040811 · Cited by 66
“While the printability of high-viscosity bioinks and high cell concentrations is an advantage [37], the inherent nozzle-clogging problem is a disadvantage [64].”
BackgroundQiao, Y., Xu, S., Zhu, T., Tang, N., Bai, X., & Zheng, C. (2019) · Polymer · doi:10.1016/j.polymer.2019.121994 · Cited by 67
Trends in Double Networks as Bioprintable and Injectable Hydrogel Scaffolds for Tissue Regeneration
Aldana, A. A., Houben, S., Moroni, L., Baker, M. B., & Pitet, L. M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01749 · Cited by 66
Clinical challenges in bone tissue engineering - A narrative review
Hoveidaei, A. H., Sadat‐Shojai, M., Nabavizadeh, S. S., Niakan, R., Shirinezhad, A., Mosalamiaghili, S., & Tabaie, S. A. (2024) · Bone · doi:10.1016/j.bone.2024.117363 · Cited by 69
“Vascular networks can be already made in the graft through three-dimensional bioprinting with extrusion-based, non-contact (inkjet), and laser-assisted methods (224,225).”
Pramanick, A., Hayes, T., Sergis, V., McEvoy, E., Pandit, A. S., & Daly, A. C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414559 · Cited by 67
Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering
Shapira, A., Noor, N., Asulin, M., & Dvir, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5055659 · Cited by 58
Ahlfeld, T., Schuster, F., Förster, Y., Quade, M., Akkineni, A. R., Rentsch, C., Rammelt, S., Gelinsky, M., & Lode, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801512 · Cited by 65
Urruela-Barrios, R., Ramírez-Cedillo, E., Díaz-de-León-Lastras, A., Alvarez, A., & Ortega-Lara, W. D. L. (2019) · Polymers · doi:10.3390/polym11030457 · Cited by 63
“by other researchers [31], the pseudo-plasticity phenomena observed in the hydrogel ink implies a decreased shear stress at the high shear rates that are present inside a syringe orifice during fabrication, followed by a sharp increase in viscosity resulting in a high printing fidelity upon deposition.”
BackgroundInfluentialZhang, J., Allardyce, B. J., Rajkhowa, R., Kalita, S., Dilley, R. J., Wang, X., & Liu, X. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109784 · Cited by 65
Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel
Łabowska, M. B., Skrodzka, M., Sicińska, H., Michalak, I., & Detyna, J. D. (2023) · Gels · doi:10.3390/gels9010063 · Cited by 62
“The mechanical properties of biomaterials used in tissue engineering are crucial to provide support to the new tissue and space required for cell growth [33].”
BackgroundAlignment engineering in thermal materials
Xie, B., Zhao, W., Luo, X., & Hu, R. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100738 · Cited by 66
Wang, Q., Feng, S., Zhong, L. X., Zhou, Y., Liu, J., Liu, H., & Zhu, Q. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.150776 · Cited by 71
Kim, C. S., Yang, Y. J., Bahn, S. Y., & Chi, H. J. (2017) · NPG Asia Materials · doi:10.1038/am.2017.71 · Cited by 62
Rutz, A. L., Lewis, P. L., & Shah, R. N. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.162 · Cited by 67
Rey, F., Barzaghini, B., Nardini, A., Bordoni, M., Zuccotti, G., Cereda, C., Raimondi, M. T., & Carelli, S. (2020) · Cells · doi:10.3390/cells9071636 · Cited by 64
“The localized heating in a thermal printer lasts for a very short time, but it can still cause a stressful condition for the deposited cells [56,61].”
BackgroundMethodInfluentialDirecting the growth and alignment of biliary epithelium within extracellular matrix hydrogels
Lewis, P. L., Yan, M., Su, J., & Shah, R. N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.039 · Cited by 61
“3D printing hydrogels is a central challenge in extending 3D printing technology to traditional tissue engineering [38,39].”
BackgroundMiramini, S., Fegan, K. L., Green, N. C., Espino, D. M., Zhang, L., & Thomas-Seale, L. E. J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103544 · Cited by 62
Hedegaard, C. L., & Mata, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cb · Cited by 58
Three Potential Elements of Developing Nerve Guidance Conduit for Peripheral Nerve Regeneration
Zhang, C., Gong, J., Zhang, J., Zhu, Z., Qian, Y., Lu, K., Zhou, S., Gu, T., Wang, H., He, Y., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202302251 · Cited by 64
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 70
“[18,30,38,39].”
Tissue Engineering and Regenerative Medicine 2017: A Year in Review
Park, K. M., Shin, Y. M., Kim, K., & Shin, H. (2018) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0027 · Cited by 64
“15 The hydrogels commonly used in 3D bioprinting can be formed by various physical or chemical crosslinking strategies (Fig.”
On‐Demand Production of Flow‐Reactor Cartridges by 3D Printing of Thermostable Enzymes
Maier, M., Radtke, C. P., Hubbuch, J. J., Niemeyer, C. M., & Rabe, K. S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711072 · Cited by 65
Cheng, X., Jin, Y. P., Sun, T., Qi, R., Fan, B., & Li, H. (2014) · RSC Advances · doi:10.1039/c4ra13500h · Cited by 64
Synthesis and High-Throughput Processing of Polymeric Hydrogels for 3D Cell Culture
Lowe, S. B., Tan, V. T. G., Soeriyadi, A. H., Davis, T. P., & Gooding, J. J. (2014) · Bioconjugate Chemistry · doi:10.1021/bc500310v · Cited by 68
Peptide modification of purified gellan gum
Ferris, C. J., Stevens, L. R., Gilmore, K. J., Mume, E., Greguric, I. D., Kirchmajer, D. M., Wallace, G. G., & Panhuis, M. I. H. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01727g · Cited by 64
Cell-microenvironment interactions and architectures in microvascular systems
Bersini, S., Yazdi, I. K., Talò, G., Shin, S. R., Moretti, M., & Khademhosseini, A. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.07.002 · Cited by 58
“In contrast, bioartificial networks can be developed by assembling simple building blocks (e.g., monolayers of ECs) (Zhang et al., 2013) or directly bioprinting cell-laden structures with precise shapes and dimensions (Huang et al., 2011, Khademhosseini and Langer, 2007, Malda et al., 2013).”
Du, Z., Li, N., Hua, Y., Yong Quan, S. H. I., Bao, C., Zhang, H., Yang, Y. A., Lin, Q., & Zhu, L. (2017) · Chemical Communications · doi:10.1039/c7cc08225h · Cited by 60
3D bioprinted complex constructs reinforced by hybrid multilayers of electrospun nanofiber sheets
Yoon, Y., Kim, C. H., Lee, J. E., Yoon, J., Lee, N.-K., Kim, T. H., & Park, S.-H. (2019) · Biofabrication · doi:10.1088/1758-5090/ab08c2 · Cited by 63
Bio-instructive materials for musculoskeletal regeneration
Gonzalez‐Fernandez, T., Sikorski, P., & Leach, J. K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.014 · Cited by 65
Rutz, A. L., Gargus, E. S., Hyland, K. E., Lewis, P. L., Aakash, S., Burghardt, W. R., & Shah, R. N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.09.007 · Cited by 64
Flow and hydrodynamic shear stress inside a printing needle during biofabrication
Müller, S., Mirzahossein, E., Iftekhar, E. N., Bächer, C., Schrüfer, S., Schubert, D. W., Fabry, B., & Gekle, S. (2020) · PLoS ONE · doi:10.1371/journal.pone.0236371 · Cited by 60
3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool
Puertas‐Bartolomé, M., Włodarczyk‐Biegun, M. K., del Campo, A., Vázquez‐Lasa, B., & Román, J. S. (2020) · Polymers · doi:10.3390/polym12091986 · Cited by 60
Pei, Z., Yu, Z., Li, M., Bai, L., Wang, W., Chen, H., Yang, H., Wei, D., & Yang, L. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.03.023 · Cited by 60
Sun, W., Schaffer, S., Dai, K., Yao, L., Feinberg, A. W., & Webster‐Wood, V. A. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.673533 · Cited by 61
“Reprinted from (Malda et al., 2013) ©2013 John Wiley and Sons, Inc. (D2) A bending actuator with 3D printed humidity-responsive hydrogel layer (blue) with water vapor induced actuation (D3-4).”
Soliman, B. G., Major, G. S., Atienza‐Roca, P., Murphy, C. A., Longoni, A., Alcala‐Orozco, C. R., Rnjak‐Kovacina, J., Gawlitta, D., Woodfield, T. B. F., & Lim, K. S. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101873 · Cited by 62
O'Shea, D. G., Curtin, C. M., & O’Brien, F. J. (2022) · Biomaterials Science · doi:10.1039/d1bm01540k · Cited by 65
Loeffler, F. F., Foertsch, T. C., Popov, R., Mattes, D. S., Schlageter, M., Sedlmayr, M., Ridder, B., Dang, F., von Bojničić‐Kninski, C., Weber, L. K., et al. (2016) · Nature Communications · doi:10.1038/ncomms11844 · Cited by 59
A desktop multi-material 3D bio-printing system with open-source hardware and software
Lee, J., Kim, K. E., Bang, S., Noh, I., & Lee, C. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0072-x · Cited by 59
“Materials properties that are required for 3D bio-printing are ‘viscosity’ to determine the printability and the structure of output, ‘mechanical properties’ to maintain the desired shape inside the body, ‘biocompatibility’ which does not cause autoimmune reactions and is useful for cell activity and cell signaling, a…”
BackgroundA dual crosslinking strategy to tailor rheological properties of gelatin methacryloyl
Zhou, M., Lee, B. H., & Tan, L. P. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2017.02.003 · Cited by 62
“The nozzle is easily clogged when the viscosity is too high within the nozzle tip during extrusion([35]); however, a relatively high viscosity is required to avoid the surface tension-driven droplet formation and the collapse of post-extrusion structure([36]).”
BackgroundBlaudez, F., Ivanovski, S., Hamlet, S. M., & Vaquette, C. (2019) · Methods · doi:10.1016/j.ymeth.2019.08.002 · Cited by 67
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.