25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
Items 501–600 of 1,002
Levato, R., Lim, K. S., Li, W., Urigoitia-Asua, A., Peña, L. B., Wang, M., Falandt, M., Bernal, P. N., Gawlitta, D., Zhang, Y. S., et al. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100162 · Cited by 109
Self-citationMurphy, C. A., Lim, K. S., & Woodfield, T. B. F. (2022) · Advanced Materials · doi:10.1002/adma.202107759 · Cited by 97
Shedding light on 3D printing: Printing photo-crosslinkable constructs for tissue engineering
Zhang, Q., Bei, H., Zhao, M., Dong, Z., & Zhao, X. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121566 · Cited by 97
Fully 3D-printed organic electrochemical transistors
Massetti, M., Zhang, S., Harikesh, P. C., Burtscher, B., Diacci, C., Simon, D. T., Liu, X., Fahlman, M., Tu, D., Magnus Berggren, A., et al. (2023) · npj Flexible Electronics · doi:10.1038/s41528-023-00245-4 · Cited by 95
Wang, J., Liu, Y., Zhang, X., Rahman, S. E., Su, S., Wei, J., Ning, F., Hu, Z., Martínez–Zaguilán, R., Sennoune, S. R., et al. (2020) · Polymer · doi:10.1016/j.polymer.2020.123238 · Cited by 99
3D bioprinting of soft materials-based regenerative vascular structures and tissues
Zhang, Z., Wang, B., Hui, D., Qiu, J., & Wang, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.011 · Cited by 99
“Hydrogel is composed of a series of hydrophilic polymer chains that are crosslinked through physical bonding such as thermal, chemical bonding like CaCl2 solution [41,81], or enzymatic bonding, in the presence of water [82].”
Background3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility
Weems, A. C., Pérez-Madrigal, M. M., Arno, M. C., & Dove, A. P. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01539 · Cited by 87
Freeform 3D printing using a continuous viscoelastic supporting matrix
Patrício, S. G., Sousa, L. R., Correia, T. R., Gaspar, V. M., Pires, L. S. O., Luís, J. L., Oliveira, J. M., & Mano, J. F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8bc3 · Cited by 95
Tuning Superfast Curing Thiol‐Norbornene‐Functionalized Gelatin Hydrogels for 3D Bioprinting
Göckler, T., Haase, S., Kempter, X., Pfister, R., Maciel, B. R., Grimm, A., Molitor, T., Willenbacher, N., & Schepers, U. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100206 · Cited by 95
From the printer: Potential of three-dimensional printing for orthopaedic applications
Mok, S.-W., Nizak, R., Fu, S., Ho, K. K., Qin, L., Saris, D. B. F., Chan, K., & Malda, J. (2016) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2016.04.003 · Cited by 106
“There is currently a limited range of biomaterials available for bioprinting, as most publications are using very similar materials [5].”
BackgroundInfluentialSelf-citationSarker, M., & Chen, X. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 88
Bioengineering Approaches for Bladder Regeneration
Serrano‐Aroca, Á., Vera-Donoso, C. D., & Moreno‐Manzano, V. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19061796 · Cited by 93
“The main technologies employed for the deposition and patterning of biological materials are laser-induced forward transfer, inkjet printing, and robotic dispensing [163] (see Figure 7).”
MethodThree-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application
Han, Y., Wei, Q., Chang, P., Hu, K., Okoro, O. V., Shavandi, A., & Nie, L. (2021) · Crystals · doi:10.3390/cryst11040353 · Cited by 93
“This printing technique can be cataloged into three kinds: pneumatic-based, piston-based, and screw-driven-based 3D printing (b) [61].”
BackgroundMethodLiu, S., Yang, H., Chen, D., Xie, Y., Tai, C., Wang, L., Wang, P., & Wang, B. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac038 · Cited by 100
Direct Ink Writing of Conductive Hydrogels
Ho, M., Ramirez, A. B., Akbarnia, N., Croiset, E., Prince, E., Fuller, G. G., & Kamkar, M. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202415507 · Cited by 123
Nadernezhad, A., Caliskan, O. S., Topuz, F., Afghah, F., Erman, B., & Koc, B. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00665 · Cited by 91
Collagen and chitosan blends for 3D bioprinting: A rheological and printability approach
Heidenreich, A. C., Pérez-Recalde, M., Wusener, A. G., & Hermida, É. B. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106297 · Cited by 94
Wychowaniec, J. K., Litowczenko, J., Tadyszak, K., Natu, V., Aparicio, C., Peplińska, B., Barsoum, M. W., Otyepka, M., & Scheibe, B. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.08.010 · Cited by 91
Guo, Z., Dong, L., Xia, J., Mi, S., & Sun, W. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100036 · Cited by 94
Ataie, Z., Kheirabadi, S., Zhang, J. W., Kedzierski, A., Petrosky, C., Jiang, R., Vollberg, C., & Sheikhi, A. (2022) · Small · doi:10.1002/smll.202202390 · Cited by 93
Biomaterials Based on Marine Resources for 3D Bioprinting Applications
Zhang, Y., Zhou, D., Chen, J., Zhang, X., Li, X., Zhao, W., & Xu, T. (2019) · Marine Drugs · doi:10.3390/md17100555 · Cited by 93
“Concept map of variables and relations critical to biofabrication (A) with the permission of reference [14], Copyright WILEY, 2013.”
BackgroundIranmanesh, P., Ehsani, A., Khademi, A., Asefnejad, A., Shahriari, S., Soleimani, M., Nejad, M. G., Saber‐Samandari, S., & Khandan, A. (2021) · Transport in Porous Media · doi:10.1007/s11242-021-01618-x · Cited by 94
“According to the literature, natural hydrogels based on natural biopolymers such as alginate (Malda 2013; Christensen 2015), gelatin (Bhattacharjee 2015; Malda 2013; Lee 2014a), collagen (Lee 2010a, 2009a), fibrin (Skardal 2012), hyaluronic acid (Highley et al.”
BackgroundScaffold Design and Fabrication
Hutmacher, D. W., Woodfield, T. B. F., & Dalton, P. D. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-420145-3.00010-9 · Cited by 107
Self-citationGreen bioprinting: extrusion-based fabrication of plant cell-laden biopolymer hydrogel scaffolds
Seidel, J., Ahlfeld, T., Adolph, M., Kümmritz, S., Steingroewer, J., Krujatz, F., Bley, T., Gelinsky, M., & Lode, A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8854 · Cited by 87
3D Bioprinting Stem Cell Derived Tissues
Tasnim, N., la Vega, L. D., Kumar, S. A., Abelseth, L., Alonzo, M., Amereh, M., Joddar, B., & Willerth, S. M. (2018) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-018-0530-2 · Cited by 94
Development of hydroxyapatite reinforced alginate–chitosan based printable biomaterial-ink
Adhikari, J., Perwez, M. S., Das, A., & Saha, P. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100630 · Cited by 95
Tamo, A. K., Doench, I., Walter, L., Montembault, A., Sudre, G., David, L., Helguera, A. M., Selig, M., Rolauffs, B., Bernstein, A., et al. (2021) · Polymers · doi:10.3390/polym13101663 · Cited by 92
“The biomaterial and the cell types are key components, which can also impact the biofabrication process [8,9].”
BackgroundAlgal polysaccharides for 3D printing: A review
Mandal, S., Nagi, G. K., Corcoran, A. A., Agrawal, R., Dubey, M. K., & Hunt, R. W. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120267 · Cited by 95
Liu, F., Duan, G., & Yang, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123787 · Cited by 91
Mirdamadi, E., Muselimyan, N., Koti, P., Asfour, H., & Sarvazyan, N. A. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0175 · Cited by 95
Recent advances of on-demand dissolution of hydrogel dressings
Lu, H., Yuan, L., Yu, X., Wu, C., He, D., & Deng, J. (2018) · Burns & Trauma · doi:10.1186/s41038-018-0138-8 · Cited by 89
Alcala‐Orozco, C. R., Mutreja, I., Cui, X., Kumar, D., Hooper, G. J., Lim, K. S., & Woodfield, T. B. F. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00073 · Cited by 89
Construction of 3D printed constructs based on microfluidic microgel for bone regeneration
Chai, N., Zhang, J., Zhang, Q., Du, H., He, X., Jin, Y., Zhou, X., He, J., & He, C. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109100 · Cited by 90
The Role of the Microenvironment in Controlling the Fate of Bioprinted Stem Cells
West-Livingston, L. N., Park, J., Lee, S. J., Atala, A., & Yoo, J. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00126 · Cited by 84
Multifunctional 3D printing of heterogeneous hydrogel structures
Nadernezhad, A., Khani, N., Skvortsov, G. A., Toprakhisar, B., Bakırcı, E., Menceloǵlu, Y. Z., Ünal, S., & Koç, B. (2016) · Scientific Reports · doi:10.1038/srep33178 · Cited by 92
Assessment of hydrogels for bioprinting of endothelial cells
Benning, L., Gutzweiler, L., Tröndle, K., Riba, J., Zengerle, R., Koltay, P., Zimmermann, S., Stark, G. B., & Finkenzeller, G. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36291 · Cited by 82
An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues
Das, S., & Basu, B. (2019) · Journal of the Indian Institute of Science · doi:10.1007/s41745-019-00129-5 · Cited by 90
Aytaç, Z., Dubey, N., Daghrery, A., Ferreira, J. A., Araújo, I. J. D. S., Castilho, M. D., Malda, J., & Bottino, M. C. (2021) · International Materials Reviews · doi:10.1080/09506608.2021.1946236 · Cited by 87
Self-citationMihajlovic, M., Rikkers, M., Mihajlovic, M., Viola, M., Schuiringa, G. H., Ilochonwu, B. C., Masereeuw, R., Vonk, L. A., Malda, J., Ito, K., et al. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.1c01583 · Cited by 87
Self-citationScaffold Fabrication Techniques of Biomaterials for Bone Tissue Engineering: A Critical Review
Bhushan, S., Singh, S., Maiti, T. K., Sharma, C., Dutt, D., Sharma, S. K., Li, C., & Eldin, S. M. (2022) · Bioengineering · doi:10.3390/bioengineering9120728 · Cited by 98
3D Printed MEMS Technology—Recent Developments and Applications
Błachowicz, T., & Ehrmann, A. (2020) · Micromachines · doi:10.3390/mi11040434 · Cited by 86
Triggered micropore-forming bioprinting of porous viscoelastic hydrogels
Bao, G., Jiang, T., Ravanbakhsh, H., Reyes, A., Ma, Z., Strong, M., Wang, H., Kinsella, J. M., Li, J., & Mongeau, L. (2020) · Materials Horizons · doi:10.1039/d0mh00813c · Cited by 90
Jessop, Z. M., Javed, M. U., Otto, I. A., Combellack, E. J., Morgan, S. R., Breugem, C. C., Archer, C. W., Khan, I. M., Lineaweaver, W. C., Kon, M., et al. (2016) · Stem Cell Research & Therapy · doi:10.1186/s13287-015-0273-0 · Cited by 90
“Biofabrication, using robotic dispensing for example, imposes opposing requirements on the hydrogel materials [51, 133, 140, 141].”
BackgroundSelf-citationMontalbano, G., Molino, G., Fiorilli, S., & Vitale-Brovarone, C. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.02.018 · Cited by 84
“2 Pa with increasing values of shear rates and stresses, suggesting a typical pseudoplastic behaviour of the material alternatively defined as shear thinning behaviour [21,35].”
BackgroundOut‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 91
Self-citationBioprinting Neural Systems to Model Central Nervous System Diseases
Qiu, B., Bessler, N., Figler, K. P., Buchholz, M., Rios, A. C., Malda, J., Levato, R., & Caiazzo, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910250 · Cited by 86
Self-citation3D Bioprinting of Lignocellulosic Biomaterials
Shavandi, A., Hosseini, S., Okoro, O. V., Nie, L., Babadi, F. E., & Melchels, F. P. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001472 · Cited by 89
Self-citationShamma, R. N., Sayed, R. H., Madry, H., Sayed, N. S. E., & Cucchiarini, M. (2022) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0026 · Cited by 88
“63,64 Its high solubility, especially at 4 (cid:2) C, 53 facilitates its removal from the pattern completely by washing with cold FIG.”
Qin, X., Gruber, P., Marković, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014) · Polymer Chemistry · doi:10.1039/c4py00792a · Cited by 94
3D Bioprinting and In Vitro Cardiovascular Tissue Modeling
Jang, J. (2017) · Bioengineering · doi:10.3390/bioengineering4030071 · Cited by 87
“If you would like to get further information, I recommend the reviews by Jos Malda [47] and Bin Duan [48].”
MethodLepowsky, E., Muradoğlu, M., & Taşoğlu, S. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00034 · Cited by 90
Trachsel, L., Johnbosco, C., Lang, T., Benetti, E. M., & Zenobi‐Wong, M. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01266 · Cited by 87
Recent Development and Applications of Advanced Materials via Direct Ink Writing
Tsang, C. H. A., Zhang, J., Hui, K. N., Hui, K. S., & Huang, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101358 · Cited by 85
Mogas‐Soldevila, L., Duro‐Royo, J., & Oxman, N. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0014 · Cited by 98
An Introduction to 3D Printing—Past, Present, and Future Promise
Jakus, A. E. (2018) · Elsevier eBooks · doi:10.1016/b978-0-323-58118-9.00001-4 · Cited by 82
Robotic Extrusion of Algae‐Laden Hydrogels for Large‐Scale Applications
Malik, S., Hagopian, J., Mohite, S., Lintong, C., Stoffels, L., Giannakopoulos, S., Beckett, R., Leung, C., Ruiz, J., Cruz, M., et al. (2020) · Global Challenges · doi:10.1002/gch2.201900064 · Cited by 73
3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks
Choi, Y., Park, H., Ha, D., Yun, H., Yi, H., & Lee, H. (2021) · Polymers · doi:10.3390/polym13030366 · Cited by 84
Recent advances in 3D printed electrode materials for electrochemical energy storage devices
Mubarak, S., Dhamodharan, D., & Byun, H. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2023.01.037 · Cited by 84
Phage as versatile nanoink for printing 3-D cell-laden scaffolds
Lee, D.-Y., Lee, H., Kim, Y., Yoo, S. Y., Chung, W., & Kim, G. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.004 · Cited by 82
Additive Manufacturing of Vascular Grafts and Vascularized Tissue Constructs
Elomaa, L., & Yang, Y. (2017) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0348 · Cited by 86
“Besides being printable with a high resolution, the material has to maintain high cell viability and facilitate the proliferation and migration of encapsulated cells.(126) Finding the bioprinting window of the material, the optimal balance between high resolution and cell viability, is one of the major challenges in t…”
Background3D bioprinting for cell culture and tissue fabrication
Jian, H., Wang, M., Wang, S., Wang, A., & Bai, S. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0006-1 · Cited by 84
“For instance, the rheological properties of a bioink have a direct influence on printability, compatibility, shear stress yielded by cell encapsulation, as well as structural integrity and resolution of 3D printed construct [23].”
Background3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering
Cochis, A., Bonetti, L., Sorrentino, R., Negrini, N. C., Grassi, F. A., Leigheb, M., Rimondini, L., & Farè, S. (2018) · Materials · doi:10.3390/ma11040579 · Cited by 82
“This trend is important for printing the hydrogel, enabling the appropriate temperature for good printability and shape fidelity to be set [29] and that for detaching the CS to be determined [2,3,8,13].”
BackgroundCoaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GelMA Blend Bioink
Wang, Y., Kankala, R. K., Zhu, K., Wang, S.-B., Zhang, Y. S., & Chen, A.-Z. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00926 · Cited by 77
Direct 3D printing of a tough hydrogel incorporated with carbon nanotubes for bone regeneration
Cui, H., Yu, Y., Li, X., Sun, Z., Ruan, J., Wu, Z. L., Qian, J. W., & Yin, J. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01494b · Cited by 81
Extracellular Matrix-Based Biomaterials for Cardiovascular Tissue Engineering
Khanna, A., Zamani, M., & Huang, N. F. (2021) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd8110137 · Cited by 93
“Extrusion-based biofabrication processes can accommodate high viscosities but require shear thinning materials to prevent cellular mechanical damage [148,149].”
BackgroundInfluentialBioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 88
Three-Dimensional Printing of Tissue/Organ Analogues Containing Living Cells
Park, J., Jang, J., Lee, J., & Cho, D. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1611-9 · Cited by 88
Hodder, E., Duin, S., Kilian, D., Ahlfeld, T., Seidel, J., Nachtigall, C., Bush, P. G., Covill, D., Gelinsky, M., & Lode, A. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6211-9 · Cited by 85
3D printing of cellular materials for advanced electrochemical energy storage and conversion
Tian, X., & Zhou, K. (2020) · Nanoscale · doi:10.1039/d0nr00291g · Cited by 83
Bioprinting of Small-Diameter Blood Vessels
Cao, X., Maharjan, S., Ashfaq, R., Shin, J., & Zhang, Y. S. (2020) · Engineering · doi:10.1016/j.eng.2020.03.019 · Cited by 82
Kim, Y., Hu, Y., Jeong, J., & Jung, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119195 · Cited by 81
Microcarriers in application for cartilage tissue engineering: Recent progress and challenges
Ding, S., Liu, X., Zhao, X.-Y., Wang, K., Xiong, W., Gao, Z., Sun, C.-Y., Jia, M., Li, C., Gu, Q., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.033 · Cited by 91
Recent development in multizonal scaffolds for osteochondral regeneration
Yu, L., Cavelier, S., Hannon, B., & Wei, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.01.012 · Cited by 95
“With the fast-developing of 3D printing, printable polymers with improved structure fidelity are preferred, but balanced composition must also be in place to provide a suitable environment for embedded cells [156].”
BackgroundHafezi, F., Shorter, S. A., Tabriz, A. G., Hurt, A. P., Elmes, V. K., Boateng, J. S., & Douroumis, D. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12060550 · Cited by 84
“CH as a bioink on its own has slow gelation rate and poor mechanical properties without modification, but crosslinking of CH gives it good viscoelasticity, since one of the key factors in printability is considered to be associated crosslinking mechanisms [36].”
BackgroundInfluentialSuvarnapathaki, S., Wu, X., Lantigua, D., Nguyen, M. A., & Camci‐Unal, G. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000176 · Cited by 82
Hydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
Recent trends of biocompatible triboelectric nanogenerators toward self‐powered e‐skin
Ramaraj, S. G., Yoon, H., & Kim, S. (2020) · EcoMat · doi:10.1002/eom2.12065 · Cited by 81
Candidate Bioinks for Extrusion 3D Bioprinting—A Systematic Review of the Literature
Tarassoli, S. P., Jessop, Z. M., Jovic, T. H., Hawkins, K. M., & Whitaker, I. S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.616753 · Cited by 84
“As such, they are printed at much lower temperatures, are typically derived naturally and have mild cross-linking conditions to preserve the cells and prevent unwanted degradation of the biomolecules (Malda et al., 2013).”
BackgroundRajaram, A., Schreyer, D. J., & Chen, D. X. B. (2015) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2015.1016383 · Cited by 77
“For effective tissue regeneration using tissue repair scaffolds, porosity and the presence of interconnected spaces is of great importance.[46] Porous alginate hydrogels provide a more favorable environment for cell proliferation due to enhanced mass transfer of nutrients and oxygen.”
BackgroundYeo, M., Lee, H., & Kim, G. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035021 · Cited by 80
Korn, P., Ahlfeld, T., Lahmeyer, F., Kilian, D., Sembdner, P., Stelzer, R. H., Pradel, W., Franke, A., Rauner, M., Range, U., et al. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00217 · Cited by 77
“In the last two decades, various methods of additive manufacturing have been adapted to the fabrication of medical implants and tissue engineering constructs, amongst them extrusion-based fabrication methods (Landers et al., 2002; Malda et al., 2013).”
MethodCao, P., Tao, L., Gong, J., Wang, T., Wang, Q., Ju, J., & Zhang, Y. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01034 · Cited by 77
Beheshtizadeh, N., Azami, M., Abbasi, H. R., & Farzin, A. (2021) · Journal of Advanced Research · doi:10.1016/j.jare.2021.12.012 · Cited by 80
“85 theless, based on previous studies, the importance of rheology controlling in this field is commonly underestimated, and printability is generally analyzed only as a function of viscosity [220].”
BackgroundZhao, T., Tan, M., Cui, Y., Deng, C., Huang, H., & Guo, M. (2014) · Polymer Chemistry · doi:10.1039/c4py00554f · Cited by 77
Huang, L. Q., Yuan, W., Hong, Y., Fan, S., Yao, X., Ren, T., Song, L., Yang, G., & Zhang, Y. (2020) · Cellulose · doi:10.1007/s10570-020-03526-7 · Cited by 79
Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds
Baumann, B., Jüngst, T., Stichler, S., Feineis, S., Wiltschka, O., Kuhlmann, M., Lindén, M., & Gröll, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700153 · Cited by 79
Self-citationZhang, J., Wehrle, E., Vetsch, J. R., Paul, G. R., Rubert, M., & Müller, R. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab3c74 · Cited by 79
The Influence of Printing Parameters and Cell Density on Bioink Printing Outcomes
Gillispie, G. J., Han, A., Uzun‐Per, M., Fisher, J. P., Mikos, A. G., Niazi, M. K. K., Yoo, J. J., Lee, S. J., & Atala, A. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0210 · Cited by 81
Skin Diseases Modeling using Combined Tissue Engineering and Microfluidic Technologies
Mohammadi, M. H., Heidary Araghi, B., Beydaghi, V., Geraili, A., Moradi, F., Jafari, P., Janmaleki, M., Valente, K. P., Akbari, M., & Sanati‐Nezhad, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600439 · Cited by 74
Zhu, K., Chen, N., Liu, X., Mu, X., Zhang, W., Wang, C., & Zhang, Y. S. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800127 · Cited by 77
Biofabrication of valentine-shaped heart with a composite hydrogel and sacrificial material
Zou, Q., Grottkau, B. E., He, Z., Shu, L., Yang, L., Ma, M., & Ye, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110205 · Cited by 78
Doroteo, M. C., Mandujano-Tinoco, E. A., & Krötzsch, E. (2020) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2020.129782 · Cited by 79
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie · doi:10.1002/ange.201411383 · Cited by 77
Ahmadian, Z., Gheybi, H., & Adeli, M. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103458 · Cited by 63
2.11 Polymers of Biological Origin ☆
Silva, S. S., Fernandes, E. M., Pina, S., Silva‐Correia, J., Vieira, S., Oliveira, J. M., & Reis, R. L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10134-1 · Cited by 82
Recombinant spider silk-based bioinks
DeSimone, E. K., Schacht, K., Pellert, A., & Scheibel, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90db · Cited by 81
“lished values of 200, or a range of 100–500 μm for other bioinks) [3, 4, 25].”
BackgroundMethodInfluentialSakai, S., & Nakahata, M. (2017) · Chemistry - An Asian Journal · doi:10.1002/asia.201701364 · Cited by 75
Apelgren, P., Karabulut, E., Amoroso, M., Mantas, A., Ávila, H. M., Kölby, L., Kondo, T., Toríz, G., & Gatenholm, P. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00157 · Cited by 77
Direct ink writing of polycaprolactone / polyethylene oxide based 3D constructs
Zhang, B., Chung, S. H., Barker, S., Craig, D. Q. M., Narayan, R. J., & Huang, J. (2020) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2020.10.001 · Cited by 74
Current Insights into 3D Bioprinting: An Advanced Approach for Eye Tissue Regeneration
Ruíz, S., Villate-Beitia, I., Gallego, I., Lafuente‐Merchan, M., Puras, G., del Burgo, L. S., & Pedraz, J. L. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13030308 · Cited by 74
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.