25th Anniversary Article: Engineering Hydrogels for Biofabrication
The DOI matches its Crossref record; 164 of the 165 references it cites were found in a registry or an index.
Abstract
With advances in tissue engineering, the possibility of regenerating injured tissue or failing organs has become a realistic prospect for the first time in medical history. Tissue engineering – the combination of bioactive materials with cells to generate engineered constructs that functionally replace lost and/or damaged tissue – is a major strategy to achieve this goal. One facet of tissue engineering is biofabrication, where three‐dimensional tissue‐like structures composed of biomaterials and cells in a single manufacturing procedure are generated. Cell‐laden hydrogels are commonly used in biofabrication and are termed “bioinks”. Hydrogels are particularly attractive for biofabrication as they recapitulate several features of the natural extracellular matrix and allow cell encapsulation in a highly hydrated mechanically supportive three‐dimensional environment. Additionally, they allow for efficient and homogeneous cell seeding, can provide biologically‐relevant chemical and physical signals, and can be formed in various shapes and biomechanical characteristics. However, despite the progress made in modifying hydrogels for enhanced bioactivation, cell survival and tissue formation, little attention has so far been paid to optimize hydrogels for the physico‐chemical demands of the biofabrication process. The resulting lack of hydrogel bioinks have been identified as one major hurdle for a more rapid progress of the field. In this review we summarize and focus on the deposition process, the parameters and demands of hydrogels in biofabrication, with special attention to robotic dispensing as an approach that generates constructs of clinically relevant dimensions. We aim to highlight this current lack of effectual hydrogels within biofabrication and initiate new ideas and developments in the design and tailoring of hydrogels. The successful development of a “printable” hydrogel that supports cell adhesion, migration, and differentiation will significantly advance this exciting and promising approach for tissue engineering.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“however, these softer hydrogels are challenging to process using biofabrication technologies40.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“In contrast to our approach, traditional extrusion-based bioprinting approaches can be challenging to implement for cardiac models.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [40]
In the citing paper
“Because of their biocompatibility, low immunogenicity and rapid hydrolysis under physiologic conditions, some hydrogels have been commercialized for clinical use [312].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [312]
Citations
Cites
Chitosan—A versatile semi-synthetic polymer in biomedical applications
Dash, M., Chiellini, F., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,903
RGD modified polymers: biomaterials for stimulated cell adhesion and beyond
Hersel, U., Dahmen, C., & Kessler, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00343-0 · Cited by 2,582
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Self-citationDesigning Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Protein release from alginate matrices
Gombotz, W. R., & Wee, S. F. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.007 · Cited by 1,609
Protein release from alginate matrices
Gombotz, W. (1998) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00124-5 · Cited by 1,550
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Self-citationPrinting and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Hydrogels for Protein Delivery
Vermonden, T., Censi, R., & Hennink, W. E. (2012) · Chemical Reviews · doi:10.1021/cr200157d · Cited by 1,091
Self-citation3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Biomacromolecules · doi:10.1021/bm060680j · Cited by 956
Shear-thinning hydrogels for biomedical applications
Guvendiren, M., Lu, H. D., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c1sm06513k · Cited by 911
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Bryant, S. J., & Anseth, K. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1217 · Cited by 845
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationSchuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Self-citationApplication of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Super tough double network hydrogels and their application as biomaterials
Haque, M. A., Kurokawa, T., & Gong, J. P. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.013 · Cited by 728
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Enzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering
Moreira Teixeira, L. S., Feijen, J., van Blitterswijk, C. A., Dijkstra, P. J., & Karperien, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.067 · Cited by 615
Smart polymeric gels: Redefining the limits of biomedical devices
Chaterji, S., Kwon, I. K., & Park, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.018 · Cited by 615
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Peptide-based stimuli-responsive biomaterials
Mart, R. J., Osborne, R. D., Stevens, M. M., & Ulijn, R. V. (2006) · Soft Matter · doi:10.1039/b607706d · Cited by 583
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Gacesa, P. (1988) · Carbohydrate Polymers · doi:10.1016/0144-8617(88)90001-x · Cited by 520
Controlled growth factor release from synthetic extracellular matrices
Lee, K. Y., Peters, M. C., Anderson, K. W., & Mooney, D. J. (2000) · Nature · doi:10.1038/35050141 · Cited by 505
Kolambkar, Y. M., Dupont, K. M., Boerckel, J. D., Huebsch, N., Mooney, D. J., Hutmacher, D. W., & Guldberg, R. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.074 · Cited by 500
Self-citationDelivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element
Golden, A. P., & Tien, J. (2007) · Lab on a Chip · doi:10.1039/b618409j · Cited by 479
Hydrogels for the Repair of Articular Cartilage Defects
Spiller, K. L., Maher, S. A., & Lowman, A. M. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0077 · Cited by 470
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Self-citationCarbon Nanotube Reinforced Hybrid Microgels as Scaffold Materials for Cell Encapsulation
Shin, S. R., Bae, H., Cha, J. M., Mun, J. Y., Chen, Y.-C., Tekin, H., Shin, H., Zarabi, S., Dokmeci, M. R., Tang, S., et al. (2012) · ACS Nano · doi:10.1021/nn203711s · Cited by 464
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
A modular and supramolecular approach to bioactive scaffolds for tissue engineering
Dankers, P. Y. W., Harmsen, M. C., Brouwer, L. A., Van Luyn, M. J. A., & Meijer, E. W. (2005) · Nature Materials · doi:10.1038/nmat1418 · Cited by 455
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
Cell encapsulation using biopolymer gels for regenerative medicine
Hunt, N. C., & Grover, L. M. (2010) · Biotechnology Letters · doi:10.1007/s10529-010-0221-0 · Cited by 434
Cell patterning technologies for organotypic tissue fabrication
Guillotin, B., & Guillemot, F. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2010.12.008 · Cited by 428
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Self-citationBioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Self-citationFedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Self-citationShin, H., Olsen, B. D., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.050 · Cited by 400
A cell-laden microfluidic hydrogel
Ling, Y., Rubin, J., Deng, Y., Huang, C., Demirci, U., Karp, J. M., & Khademhosseini, A. (2007) · Lab on a Chip · doi:10.1039/b615486g · Cited by 395
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Rashkov, I., Manolova, N., Li, S. M., Espartero, J. L., & Vert, M. (1996) · Macromolecules · doi:10.1021/ma950530t · Cited by 371
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Hydrogels for protein delivery in tissue engineering
Censi, R., Di Martino, P., Vermonden, T., & Hennink, W. E. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.03.002 · Cited by 355
Self-citationGeneration of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Advances in Bioactive Hydrogels to Probe and Direct Cell Fate
DeForest, C. A., & Anseth, K. S. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-080945 · Cited by 323
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Self-citationBiomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
Araki, J., & Ito, K. (2007) · Soft Matter · doi:10.1039/b705688e · Cited by 311
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305
Lee, W., Lee, V., Polio, S., Keegan, P., Lee, J., Fischer, K., Park, J., & Yoo, S. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22613 · Cited by 289
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Self-citationTissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Shim, J.-H., Kim, J. Y., Park, M., Park, J., & Cho, D.-W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034102 · Cited by 268
Organ Printing: Promises and Challenges
Mironov, V., Kasyanov, V., Drake, C., & Markwald, R. R. (2008) · Regenerative Medicine · doi:10.2217/17460751.3.1.93 · Cited by 258
Kretschmann, O., Choi, S. W., Miyauchi, M., Tomatsu, I., Harada, A., & Ritter, H. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200504539 · Cited by 252
Characterization of printable cellular micro-fluidic channels for tissue engineering
Zhang, Y., Yu, Y., Chen, H., & Ozbolat, I. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025004 · Cited by 246
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Density and Viscosity of Concentrated Aqueous Solutions of Polyethylene Glycol
Gonzalez-Tello, P., Camacho, F., & Blazquez, G. (1994) · Journal of Chemical & Engineering Data · doi:10.1021/je00015a050 · Cited by 243
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Hanson Shepherd, J. N., Parker, S. T., Shepherd, R. F., Gillette, M. U., Lewis, J. A., & Nuzzo, R. G. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001746 · Cited by 228
Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227
Park, M. H., Joo, M. K., Choi, B. G., & Jeong, B. (2012) · Accounts of Chemical Research · doi:10.1021/ar200162j · Cited by 226
Guillemot, F., Mironov, V., & Nakamura, M. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/010201 · Cited by 224
Towards organ printing: engineering an intra-organ branched vascular tree
Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Calvert, P. (2007) · Science · doi:10.1126/science.1144212 · Cited by 224
Biomimetic strain hardening in interpenetrating polymer network hydrogels
Myung, D., Koh, W., Ko, J., Hu, Y., Carrasco, M., Noolandi, J., Ta, C. N., & Frank, C. W. (2007) · Polymer · doi:10.1016/j.polymer.2007.06.070 · Cited by 221
Bioinspired nanofibers support chondrogenesis for articular cartilage repair
Coburn, J. M., Gibson, M., Monagle, S., Patterson, Z., & Elisseeff, J. H. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1121605109 · Cited by 217
Fluid shear stress modulates surface expression of adhesion molecules by endothelial cells
Morigi, M., Zoja, C., Figliuzzi, M., Foppolo, M., Micheletti, G., Bontempelli, M., Saronni, M., Remuzzi, G., & Remuzzi, A. (1995) · Blood · doi:10.1182/blood.v85.7.1696.bloodjournal8571696 · Cited by 217
Snyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Photopatterned collagen–hyaluronic acid interpenetrating polymer network hydrogels
Suri, S., & Schmidt, C. E. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.004 · Cited by 209
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Self-citationFarrugia, B. L., Brown, T. D., Upton, Z., Hutmacher, D. W., Dalton, P. D., & Dargaville, T. R. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025001 · Cited by 201
Self-citationSelf-gelling hydrogels based on oppositely charged dextran microspheres
Van Tomme, S. R., van Steenbergen, M. J., De Smedt, S. C., van Nostrum, C. F., & Hennink, W. E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.035 · Cited by 198
Self-citationClick Chemistry for Drug Delivery Nanosystems
Lallana, E., Sousa-Herves, A., Fernandez-Trillo, F., Riguera, R., & Fernandez-Megia, E. (2012) · Pharmaceutical Research · doi:10.1007/s11095-011-0568-5 · Cited by 193
Rheology of reconstituted type I collagen gel in confined compression
Knapp, D. M., Barocas, V. H., Moon, A. G., Yoo, K., Petzold, L. R., & Tranquillo, R. T. (1997) · Journal of Rheology · doi:10.1122/1.550817 · Cited by 192
Injectable PLGA based colloidal gels for zero-order dexamethasone release in cranial defects
Wang, Q., Wang, J., Lu, Q., Detamore, M. S., & Berkland, C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.052 · Cited by 183
Reiffel, A. J., Kafka, C., Hernandez, K. A., Popa, S., Perez, J. L., Zhou, S., Pramanik, S., Brown, B. N., Ryu, W. S., Bonassar, L. J., et al. (2013) · PLoS ONE · doi:10.1371/journal.pone.0056506 · Cited by 182
Erickson, I. E., Kestle, S. R., Zellars, K. H., Farrell, M. J., Kim, M., Burdick, J. A., & Mauck, R. L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.033 · Cited by 182
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 180
de Jong, S. J., van Dijk-Wolthuis, W. N. E., Kettenes-van den Bosch, J. J., Schuyl, P. J. W., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980553i · Cited by 172
Self-citationA Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Self-citationAdditive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Strategies for Zonal Cartilage Repair using Hydrogels
Klein, T. J., Rizzi, S. C., Reichert, J. C., Georgi, N., Malda, J., Schuurman, W., Crawford, R., & Hutmacher, D. W. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200900176 · Cited by 168
Self-citationThree-dimensional inkjet biofabrication based on designed images
Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., & Nakamura, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034113 · Cited by 167
Azuma, C., Yasuda, K., Tanabe, Y., Taniguro, H., Kanaya, F., Nakayama, A., Chen, Y. M., Gong, J. P., & Osada, Y. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31043 · Cited by 159
Biodegradable Colloidal Gels as Moldable Tissue Engineering Scaffolds
Wang, Q., Wang, L., Detamore, M. S., & Berkland, C. (2008) · Advanced Materials · doi:10.1002/adma.200702099 · Cited by 159
Coburn, J. M., Gibson, M., Bandalini, P. A., Laird, C. W., Mao, H., Moroni, L., Seliktar, D., & Elisseeff, J. H. (2011) · Smart Structures and Systems · doi:10.12989/sss.2011.7.3.213 · Cited by 157
Xu, M., Wang, X., Yan, Y., Yao, R., & Ge, Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.111 · Cited by 157
Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration
Xu, W., Wang, X., Yan, Y., Zheng, W. J., Xiong, Z., Lin, F., Wu, R., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507079451 · Cited by 155
Direct Construction of a Three-dimensional Structure with Cells and Hydrogel
Yan, Y., Wang, X., Xiong, Z., Liu, H., Liu, F., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911505053658 · Cited by 155
Some hydrogels having novel molecular structures
Johnson, J. A., Turro, N. J., Koberstein, J. T., & Mark, J. E. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.002 · Cited by 152
Poly(ethylene glycol) Hydrogel System Supports Preadipocyte Viability, Adhesion, and Proliferation
Patel, P. N., Gobin, A. S., West, J. L., & Patrick, C. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1498 · Cited by 148
Protein Engineering in the Development of Functional Hydrogels
Banta, S., Wheeldon, I. R., & Blenner, M. (2010) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-070909-105334 · Cited by 148
Tissue assembly and organization: Developmental mechanisms in microfabricated tissues
Rivron, N. C., Rouwkema, J., Truckenmüller, R. K., Karperien, M., de Boer, J., & van Blitterswijk, C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.037 · Cited by 144
Compression strength and deformation of gellan gels formed with mono- and divalent cations
Tang, J. (1996) · Carbohydrate Polymers · doi:10.1016/0144-8617(95)00124-7 · Cited by 139
Laser-assisted printing of alginate long tubes and annular constructs
Yan, J., Huang, Y. H., & Chrisey, D. B. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015002 · Cited by 130
Three-dimensional Gelatin and Gelatin/Hyaluronan Hydrogel Structures for Traumatic Brain Injury
Zhang, T., Yan, Y., Wang, X., Xiong, Z., Lin, F., Wu, R., & Zhang, R. (2006) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911506074025 · Cited by 126
Reverse thermogelling biodegradable polymer aqueous solutions
Joo, M. K., Park, M. H., Choi, B. G., & Jeong, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b902208b · Cited by 123
Temenoff, J. S., Shin, H., Conway, D. E., Engel, P. S., & Mikos, A. G. (2003) · Biomacromolecules · doi:10.1021/bm030056w · Cited by 119
Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116
Rheological behavior of alginate solutions for biomanufacturing
Rezende, R. A., Bártolo, P., Mendes, A., & Filho, R. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30170 · Cited by 115
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
Protein‐Release Behavior of Self‐Assembled PEG–β‐Cyclodextrin/PEG–Cholesterol Hydrogels
van de Manakker, F., Braeckmans, K., el Morabit, N., Smedt, S. C. D., van Nostrum, C. F., & Hennink, W. E. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900603 · Cited by 112
Self-citationFeugier, P., Black, R. A., Hunt, J. A., & How, T. V. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.050 · Cited by 112
Stimuli-sensitive hydrogels: ideal carriers for chronobiology and chronotherapy
Peppas, N. A., & Leobandung, W. (2004) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856204322793539 · Cited by 112
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 112
Sodium Alginate Hydrogel-Based Bioprinting Using a Novel Multinozzle Bioprinting System
Song, S.-J., Choi, J., Park, Y., Hong, S., Lee, J. J., Ahn, C. B., Choi, H., & Sun, K. (2011) · Artificial Organs · doi:10.1111/j.1525-1594.2011.01377.x · Cited by 106
A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds
Tirella, A., Orsini, A. A., Vozzi, G., & Ahluwalia, A. D. (2009) · Biofabrication · doi:10.1088/1758-5082/1/4/045002 · Cited by 104
Buwalda, S. J., Dijkstra, P. J., Calucci, L., Forte, C., & Feijén, J. (2009) · Biomacromolecules · doi:10.1021/bm901080d · Cited by 98
Cell(MC3T3‐E1)‐Printed Poly( ϵ ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
Lee, H., Ahn, S., Bonassar, L. J., & Kim, G. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200524 · Cited by 97
Fabrication of microchannels using polycarbonates as sacrificial materials
Reed, H. A., White, C. E., Rao, V., Allen, S. A. B., Henderson, C. L., & Kohl, P. A. (2001) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/11/6/317 · Cited by 96
Patterned Hydrogel Substrates for Cell Culture with Electrohydrodynamic Jet Printing
Poellmann, M. J., Barton, K. L., Mishra, S., & Johnson, A. J. W. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100004 · Cited by 94
Construction of 3D biological matrices using rapid prototyping technology
Maher, P. S., Keatch, R. P., Donnelly, K., Mackay, R. E., & Paxton, J. Z. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960307 · Cited by 93
Dang, F., Shinohara, S., Tabata, O., Yamaoka, Y., Kurokawa, M., Shinohara, Y., Ishikawa, M., & Baba, Y. (2005) · Lab on a Chip · doi:10.1039/b417398h · Cited by 92
Li, L., Guo, X., Wang, J., Liu, P., Prud’homme, R. K., May, B. L., & Lincoln, S. F. (2008) · Macromolecules · doi:10.1021/ma8020147 · Cited by 92
Chahal, D., Ahmadi, A., & Cheung, K. C. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24562 · Cited by 92
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Bio rapid prototyping by extruding/aspirating/refilling thermoreversible hydrogel
Iwami, K., Noda, T., Ishida, K., Morishima, K., Nakamura, M., & Umeda, N. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014108 · Cited by 81
Bongio, M., van den Beucken, J., Nejadnik, M. R., Leeuwenburgh, S., Kinard, L., Kasper, F. K., Mikos, A. G., & Jansen, J. (2011) · European Cells and Materials · doi:10.22203/ecm.v022a27 · Cited by 76
Jiang, J., & Papoutsakis, E. T. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200169 · Cited by 76
Advances in tissue engineering: Cell printing
Varghese, D., Deshpande, M., Xu, T., Kesari, P., Ohri, S. K., & Boland, T. (2005) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2004.06.050 · Cited by 73
Synthetic multicellular cell-to-cell communication in inkjet printed bacterial cell systems
Choi, W. S., Ha, D., Park, S., & Kim, T. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.014 · Cited by 65
Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading
Harrass, K., Krüger, R., Möller, M., Albrecht, K., & Gröll, J. (2013) · Soft Matter · doi:10.1039/c2sm27603h · Cited by 61
Organ printing: Fiction or science
Jakab, K., Neagu, A., Mironov, V. A., & Forgács, G. (2004) · Biorheology · doi:10.1177/0006355x2004041003004026 · Cited by 55
Design criteria for a printed tissue engineering construct: A mathematical homogenization approach
Shipley, R. J., Jones, G. W., Dyson, R., Sengers, B. G., Bailey, C., Catt, C. J., Please, C. P., & Malda, J. (2009) · Journal of Theoretical Biology · doi:10.1016/j.jtbi.2009.03.037 · Cited by 55
Self-citationKasko, A. M., & Wong, D. Y. (2010) · Future Medicinal Chemistry · doi:10.4155/fmc.10.253 · Cited by 50
Ballyns, J. J., Cohen, D. L., Malone, E., Maher, S. A., Potter, H. G., Wright, T. M., Lipson, H., & Bonassar, L. J. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2009.0441 · Cited by 46
Thomas, J. D., Fussell, G. W., Sarkar, S., Lowman, A. M., & Marcolongo, M. S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.024 · Cited by 44
Censi, R., Fieten, P. J., Martino, P. D., Hennink, W. E., & Vermonden, T. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.07.039 · Cited by 27
Self-citationInhibition of Apoptosis Prevents Shear-Induced Detachment of Endothelial Cells
Macario, D. K., Entersz, I., Abboud, J., & Nackman, G. B. (2007) · Journal of Surgical Research · doi:10.1016/j.jss.2007.09.007 · Cited by 26
Forgács, G. (2012) · Nature Materials · doi:10.1038/nmat3412 · Cited by 25
Gan, Z., Zhang, L., & Chen, G. (2011) · Electrophoresis · doi:10.1002/elps.201100436 · Cited by 20
Research works printed but not linked: 11
- 10.1089/ten.2004.10.1566 · doi:10.1089/ten.2004.10.1566 · Paper page
- Jakab K., 2004, Biorheology, 41, 371
- Ferris C. J., 2013, Appl. Microbiol. Biotechnol.
- Fardim P., 2002, TAPPI Journal, 1
- Koch L., 2012, Curr. Pharm. Biotechnol.
- van der Meer A. D., 2010, Biomicrofluidics, 4
- Smith R. L., 2004, Clin Orthop Relat Res, S89
- Min Kyoon S., 2008, Appl. Phys. Lett., 93, 3
- Saez‐Martinez V., 2010, J. Appl. Polym. Sci., 120, 6
- Dalton P. D., 2013, Biomaterials Science
- Cheng J., 2008, J Manuf Sci E‐T Asme, 130
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
“When encapsulation of cells is desired during the fabrication processes, the need for hydrogels with suitable mechanical properties and biocompatibility becomes critical (114).”
BackgroundMethodA practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
“These include newly developed methods where hydrogels act as bio-inks to print cells either in a layer-by-layer manner from a 2D substrate 94 or directly in 3D space within another hydrogel 95 .”
MethodPrinting soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Metadata
- Authors
- Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W.
- Affiliations
- Queensland University of Technology (AU)
- University Medical Center Utrecht (NL)
- University of Würzburg (DE)
- Utrecht University (NL)
- Department of Functional Materials in Medicine and Dentistry University of Würzburg Pleicherwall 2 97070 Würzburg Germany
- Corresponding author
- Malda, Jos
- Hutmacher, Dietmar W.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2013-08-23
- Volume
- 25
- Issue
- 36
- Pages
- 5011-5028
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2010165954
- Cited by
- 1,901
- References
- 165
- Citations by year
- 2026: 93 · 2025: 126 · 2024: 121 · 2023: 180 · 2022: 177 · 2021: 211 · 2020: 225 · 2019: 185 · 2018: 172 · 2017: 155 · 2016: 135 · 2015: 78 · 2014: 38 · 2013: 4
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- hydrogels, bioinks, biofabrication, tissue engineering, robotic dispensing, extracellular matrix, cell encapsulation, hydrogel design, cell adhesion, cell migration, cell differentiation, cell-laden hydrogels
- MeSH terms
- Anniversaries and Special Events, Biocompatible Materials, Humans, Polymers, Rheology, Robotics, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.