CoChat

2D Transition‐Metal‐Dichalcogenide‐Nanosheet‐Based Composites for Photocatalytic and Electrocatalytic Hydrogen Evolution Reactions

Lu, Qipeng, Yu, Yifu, Ma, Qinglang, Chen, Bo, Zhang, Hua · 2016 · Advanced Materials

The DOI matches its Crossref record; 187 of the 190 references it cites were found in a registry or an index; 19 of the 161 sources its claims cite were checked for support.

Abstract

Hydrogen (H2) is one of the most important clean and renewable energy sources for future energy sustainability. Nowadays, photocatalytic and electrocatalytic hydrogen evolution reactions (HERs) from water splitting are considered as two of the most efficient methods to convert sustainable energy to the clean energy carrier, H2. Catalysts based on transition metal dichalcogenides (TMDs) are recognized as greatly promising substitutes for noble‐metal‐based catalysts for HER. The photocatalytic and electrocatalytic activities of TMD nanosheets for the HER can be further improved after hybridization with many kinds of nanomaterials, such as metals, oxides, sulfides, and carbon materials, through different methods including the in situ reduction method, the hot‐injection method, the heating‐up method, the hydro(solvo)thermal method, chemical vapor deposition (CVD), and thermal annealing. Here, recent progress in photocatalytic and electrocatalytic HERs using 2D TMD‐based composites as catalysts is discussed.

Overview

CoChat Summary

TL;DR

This review summarizes recent progress in 2D transition-metal-dichalcogenide (TMD)-based composites for photocatalytic and electrocatalytic hydrogen evolution reactions (HERs), focusing on synthesis methods, composite architectures, and performance. It argues that TMD nanosheets hybridized with metals, oxides, sulfides, and carbon materials can improve HER activity and may offer low-cost alternatives to noble-metal catalysts.

Key findings

  • TMD-based composites can enhance photocatalytic HER by improving charge separation and providing active edge sites; for example, CdS activity (150 µmol g⁻¹ h⁻¹) increased up to 28 times with 1 wt% WS₂ (4200 µmol h⁻¹ g⁻¹) and 36 times with 0.2 wt% MoS₂ (ca. 5400 µmol h⁻¹ g⁻¹).
  • Optimized MoS₂/CdS photocatalysts reached 13,150 µmol h⁻¹ g⁻¹ versus 850 µmol h⁻¹ g⁻¹ for pure CdS, while MoS₂-g-C₃N₄ (0.5 wt%) reached 230.1 µmol h⁻¹ g⁻¹ versus 20.3 µmol h⁻¹ g⁻¹ for unmodified g-C₃N₄.
  • In electrocatalytic HER, TMD-metal hybrids such as Pt-MoS₂ showed near-zero overpotential and a Tafel slope of 40 mV per decade, comparable to commercial Pt-C; Pt on TiS₂/TaS₂ showed a Tafel slope of 41 mV per decade.
  • TMD-carbon and TMD-metal-oxide composites also improved activity: MoS₂/RGO gave a Tafel slope of 41 mV per decade and overpotential of ca. 100 mV; MoO₃@MoS₂ core-shell nanowires gave overpotential of 150–200 mV and Tafel slope of 50–60 mV per decade.

Methods

  • Design: a review/progress report, not a primary experimental study; it synthesizes recent literature on preparation and catalytic HER performance of 2D TMD-based composites.
  • Data/sample: cited studies covering TMD composites with semiconductors, metals, carbon materials, and metal oxides, including MoS₂, WS₂, TiS₂, TaS₂, MoSe₂, and WSe₂.
  • Main analysis: narrative comparison of synthetic methods (in situ reduction, hot-injection, heating-up, hydro(solvo)thermal, CVD, thermal annealing) and photocatalytic/electrocatalytic HER metrics such as H₂ evolution rates, overpotentials, Tafel slopes, and quantum yields.

Limitations

  • The paper states that practical application is limited by aggregation of TMD-based composites under light irradiation, heat, or electrocatalytic testing, which decreases active sites.
  • The paper states that the catalysis mechanism of TMD-based composites for HER is not well revealed; most mechanistic work focuses on single-component TMD nanosheets, while composite studies often only report activity effects.
  • The paper states that most research has focused on MoS₂ and WS₂, and that other TMDs need further study; it also notes that some preparation methods struggle with precise control of layer number, morphology, or composite formation mechanism.
  • Evident from the text: as a review, it reports no new experimental data, and the tabulated performance comparisons come from studies using different light sources, reaction solutions, catalyst loadings, and measurement conditions, which limits direct cross-study comparison.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/adma.201503270

Cites

187 of 187 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

14 Valid · 7 Not valid · 69 Not checked · 16 Own results and interpretations

41 more claims

Create a free account to see all 106 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 43
  • Probably not a substantial claim. 18
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 187 references

Research works printed but not linked: 5

  1. Liu Y., 2013, Int. J. Photoenergy, 2013, 247516
  2. Min S., 2012, J. Phys. Chem. B, 116, 25415
  3. Troostwijk A. P. v., 1789, Obs. Phys., 35, 369
  4. 10.1021/ja404523s · DOI · Paper page
  5. 10.1039/C3TA13584E · DOI · Paper page

Cited by

Items 1,001–1,100 of 1,459

Metadata

Authors
Lu, Q., Yu, Y., Ma, Q., Chen, B., & Zhang, H.
Affiliations
Nanyang Technological University (SG)
Corresponding author
Zhang, Hua
Venue
Advanced Materials
Publisher
Wiley
Published
2015-12-16
Volume
28
Issue
10
Pages
1917-1933
ISSN
  • 0935-9648 (ISSN-L)
  • 1521-4095
OpenAlex
W2214476518
Cited by
1,447
References
190
Citations by year
2026: 46 · 2025: 85 · 2024: 105 · 2023: 113 · 2022: 150 · 2021: 161 · 2020: 195 · 2019: 181 · 2018: 186 · 2017: 157 · 2016: 67
FWCI
40.42
Type
journal article
Language
en
Open access
closed
Locations
  • Advanced Materials (publishedVersion)
  • PubMed (publishedVersion)
  • DR-NTU (Nanyang Technological University) (submittedVersion)
Funders
  • NTU (M4081296.070.500000)
  • iFood Research (M4081458.070.500000)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
  • Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
Keywords
hydrogen evolution reaction, transition metal dichalcogenides, photocatalytic hydrogen evolution, electrocatalytic hydrogen evolution, water splitting, noble metal-free catalysts, hybrid nanostructures, synthesis methods

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.