2D Transition‐Metal‐Dichalcogenide‐Nanosheet‐Based Composites for Photocatalytic and Electrocatalytic Hydrogen Evolution Reactions
The DOI matches its Crossref record; 187 of the 190 references it cites were found in a registry or an index; 19 of the 161 sources its claims cite were checked for support.
Abstract
Hydrogen (H2) is one of the most important clean and renewable energy sources for future energy sustainability. Nowadays, photocatalytic and electrocatalytic hydrogen evolution reactions (HERs) from water splitting are considered as two of the most efficient methods to convert sustainable energy to the clean energy carrier, H2. Catalysts based on transition metal dichalcogenides (TMDs) are recognized as greatly promising substitutes for noble‐metal‐based catalysts for HER. The photocatalytic and electrocatalytic activities of TMD nanosheets for the HER can be further improved after hybridization with many kinds of nanomaterials, such as metals, oxides, sulfides, and carbon materials, through different methods including the in situ reduction method, the hot‐injection method, the heating‐up method, the hydro(solvo)thermal method, chemical vapor deposition (CVD), and thermal annealing. Here, recent progress in photocatalytic and electrocatalytic HERs using 2D TMD‐based composites as catalysts is discussed.
Overview
CoChat Summary
TL;DR
This review summarizes recent progress in 2D transition-metal-dichalcogenide (TMD)-based composites for photocatalytic and electrocatalytic hydrogen evolution reactions (HERs), focusing on synthesis methods, composite architectures, and performance. It argues that TMD nanosheets hybridized with metals, oxides, sulfides, and carbon materials can improve HER activity and may offer low-cost alternatives to noble-metal catalysts.
Key findings
- TMD-based composites can enhance photocatalytic HER by improving charge separation and providing active edge sites; for example, CdS activity (150 µmol g⁻¹ h⁻¹) increased up to 28 times with 1 wt% WS₂ (4200 µmol h⁻¹ g⁻¹) and 36 times with 0.2 wt% MoS₂ (ca. 5400 µmol h⁻¹ g⁻¹).
- Optimized MoS₂/CdS photocatalysts reached 13,150 µmol h⁻¹ g⁻¹ versus 850 µmol h⁻¹ g⁻¹ for pure CdS, while MoS₂-g-C₃N₄ (0.5 wt%) reached 230.1 µmol h⁻¹ g⁻¹ versus 20.3 µmol h⁻¹ g⁻¹ for unmodified g-C₃N₄.
- In electrocatalytic HER, TMD-metal hybrids such as Pt-MoS₂ showed near-zero overpotential and a Tafel slope of 40 mV per decade, comparable to commercial Pt-C; Pt on TiS₂/TaS₂ showed a Tafel slope of 41 mV per decade.
- TMD-carbon and TMD-metal-oxide composites also improved activity: MoS₂/RGO gave a Tafel slope of 41 mV per decade and overpotential of ca. 100 mV; MoO₃@MoS₂ core-shell nanowires gave overpotential of 150–200 mV and Tafel slope of 50–60 mV per decade.
Methods
- Design: a review/progress report, not a primary experimental study; it synthesizes recent literature on preparation and catalytic HER performance of 2D TMD-based composites.
- Data/sample: cited studies covering TMD composites with semiconductors, metals, carbon materials, and metal oxides, including MoS₂, WS₂, TiS₂, TaS₂, MoSe₂, and WSe₂.
- Main analysis: narrative comparison of synthetic methods (in situ reduction, hot-injection, heating-up, hydro(solvo)thermal, CVD, thermal annealing) and photocatalytic/electrocatalytic HER metrics such as H₂ evolution rates, overpotentials, Tafel slopes, and quantum yields.
Limitations
- The paper states that practical application is limited by aggregation of TMD-based composites under light irradiation, heat, or electrocatalytic testing, which decreases active sites.
- The paper states that the catalysis mechanism of TMD-based composites for HER is not well revealed; most mechanistic work focuses on single-component TMD nanosheets, while composite studies often only report activity effects.
- The paper states that most research has focused on MoS₂ and WS₂, and that other TMDs need further study; it also notes that some preparation methods struggle with precise control of layer number, morphology, or composite formation mechanism.
- Evident from the text: as a review, it reports no new experimental data, and the tabulated performance comparisons come from studies using different light sources, reaction solutions, catalyst loadings, and measurement conditions, which limits direct cross-study comparison.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
14 Valid · 7 Not valid · 69 Not checked · 16 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Recently, our group has demonstrated that a series of noble metal nanocrystals (Au, Ag, Pt, and Pd) could grow on the surface of single-layer MoS 2 nanosheets by using reduction agents (e.g., ascorbic acid) or the photochemical reduction method. [ 56 ]”
What the sources say
- Partly supportedcites [56] matched to “Solution-phase epitaxial growth of noble metal nanostructures on dispersible single-layer molybdenum disulfide nanosheets” (2013) sourceExperimental — accuracy not yet measured
The introduction and the section “Epitaxial growth of Pd, Pt and Ag NSs on MoS₂ nanosheets” report growth of Au, Ag, Pt and Pd nanostructures on single-layer MoS₂. That section lists chemical and photochemical reduction among the methods used, but says Au deposited spontaneously without an added reducing agent; the claim omits this third route. Page numbers are not provided in our copy. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“graphene (G), a single-layer of graphite, is considered to be an excellent supporting matrix for semiconductor nanoparticles, because of its superior electron mobility (ca. 4000 cm 2 V -1 s -1 ) and high specifi c surface area (ca. 2600 m 2 g -1 ). [ 116-121 ]”
What the sources say
- Not checked — no full text of the sourcecites [116] matched to “Graphene-based composite materials” (2006) source
- Not checked — no full text of the sourcecites [117] matched to “Anchoring Semiconductor and Metal Nanoparticles on a Two-Dimensional Catalyst Mat. Storing and Shuttling Electrons with Reduced Graphene Oxide” (2010) source
- Not checked — no full text of the sourcecites [118] matched to “Graphene-based semiconductor photocatalysts” (2012) source
- Partly supportedcites [119] matched to “Synthesis and applications of graphene-based noble metal nanostructures” (2013) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says that inorganic nanostructures have been prepared on graphene oxide or reduced graphene oxide sheets. The Applications section attributes improved performance of graphene-supported noble metal catalysts to graphene’s large surface area and high conductivity. Our copy does not give the claimed mobility or surface-area values, or specifically establish the claim for semiconductor nanoparticles. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [120] matched to “Graphene and Graphene‐Based Materials for Energy Storage Applications” (2014) source
- Not checked — no full text of the sourcecites [121] matched to “Graphene-based materials: Fabrication and application for adsorption in analytical chemistry” (2014) source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“CVD is an ideal method to prepare high-quality, few-defect MoS 2 nanosheets with controllable layer numbers on different substrates. [ 77-80 ]”
What the sources say
- Not checked — no full text of the sourcecites [77] matched to “Recent advances in controlled synthesis of two-dimensional transition metal dichalcogenides via vapour deposition techniques” (2015) source
- Supportedcites [78] matched to “Layer-Dependent Electrocatalysis of MoS2 for Hydrogen Evolution” (2014) source
The passage labeled Abstract (p. 2) describes CVD-grown MoS₂ films on glassy carbon with precursor-controlled layer numbers, high crystalline quality, and similar films previously grown on sapphire. Another passage labeled Abstract (p. 2) reports no substantial voids, steps, or edges. These findings support the citing sentence’s characterization of CVD as a method for making high-quality, few-defect films on different substrates. (LLM, conf=0.88)
- Partly supportedcites [79] matched to “Controlled Scalable Synthesis of Uniform, High-Quality Monolayer and Few-layer MoS2 Films” (2013) sourceExperimental — accuracy not yet measured
The Abstract and Results (pages unavailable) report a self-limiting CVD approach that grows high-quality monolayer and few-layer MoS2 films on silicon oxide, sapphire, and graphite with precisely controlled layer numbers. The Results describe good crystalline quality, but do not establish that the films have few defects; the paper demonstrates this particular CVD approach rather than CVD methods generally. (LLM, conf=0.84)
- Partly supportedcites [80] matched to “Synthesis of Large‐Area MoS2 Atomic Layers with Chemical Vapor Deposition” (2012) sourceExperimental — accuracy not yet measured
The conclusion (p. 3) reports CVD-grown monolayer, bilayer and few-layer MoS₂ on SiO₂/Si, notes growth on sapphire, and describes the monolayer as highly crystalline. But observing different layer thicknesses does not establish control over layer number; the paper also does not establish that the sheets have few defects. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Carbon materials, such as porous carbon, [ 158-161 ] carbon nanofi bers, [ 162 ] carbon nanotubes [ 163-167 ] and graphene, [ 42,43,168-175 ] have shown great potential applications as electrocatalyst supports owing to their high conductivity and stability.”
What the sources say
- Not checked — no full text of the sourcecites [158] matched to “Synthesis of MoS2-carbon composites with different morphologies and their application in hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [159] matched to “Ultrathin MoS2 nanosheets growing within an in-situ-formed template as efficient electrocatalysts for hydrogen evolution” (2015) source
- Partly supportedcites [160] matched to “Nanocomposite of MoS2 on ordered mesoporous carbon nanospheres: A highly active catalyst for electrochemical hydrogen evolution” (2012) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) calls carbon materials good catalyst supports, and Section 3.2 describes the mesoporous carbon nanospheres as highly conductive. Section 3.2 reports stability for the MoS₂/carbon composite electrode, not for carbon supports themselves; the claim that carbon materials are suitable because of their stability is therefore not established by this paper. (LLM, conf=0.83)
- Not checked — no full text of the sourcecites [161] matched to “A high-porosity carbon molybdenum sulphide composite with enhanced electrochemical hydrogen evolution and stability” (2013) source
- Not checked — no full text of the sourcecites [162] matched to “S-rich single-layered MoS 2 nanoplates embedded in N-doped carbon nanofibers: efficient co-electrocatalysts for the hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [163] matched to “Highly active and stable hydrogen evolution electrocatalysts based on molybdenum compounds on carbon nanotube−graphene hybrid support” (2014) source
- Partly supportedcites [164] matched to “Facile Synthesis of MoS 2 @CNT as an Effective Catalyst for Hydrogen Production in Microbial Electrolysis Cells” (2014) sourceExperimental — accuracy not yet measured
The paper describes highly conductive carbon nanotubes as a support for a MoS₂ electrocatalyst and links increased CNT content to improved hydrogen-evolution activity (opening summary; Heyrovsky reaction section, page unavailable). It does not establish stability as a reason for using CNTs; its conclusion says catalyst durability remains to be investigated. This citation supports the nanotube and conductivity portion of the citing sentence, but not its stability rationale. (LLM, conf=0.87)
- Not checked — no full text of the sourcecites [165] matched to “Facile synthesis of low crystalline MoS2 nanosheet-coated CNTs for enhanced hydrogen evolution reaction” (2013) source
- Not checked — no full text of the sourcecites [166] matched to “Molybdenum sulfide/N-doped CNT forest hybrid catalysts for high-performance hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [167] matched to “Easy incorporation of single-walled carbon nanotubes into two-dimensional MoS2 for high-performance hydrogen evolution” (2014) source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“each layer of graphene can absorb ca. 2.3% of incident light. [ 123 ]”
What the sources say
- Supportedcites [123] matched to “Fine Structure Constant Defines Visual Transparency of Graphene” (2008) source
The Optical measurements section (p. 2) reports that each additional graphene layer adds approximately 2.3% to white-light opacity. The Absorption of light by 2D Dirac fermions section (p. 4) explains that graphene reflects very little light, so its opacity is dominated by absorption. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
41 more claims
Create a free account to see all 106 claims and every source verdict.
- It may state two separate claims as one. 43
- Probably not a substantial claim. 18
- The quote only partly states this claim. 1
Citations
Cites
Electrochemical Photolysis of Water at a Semiconductor Electrode
FUJISHIMA, A., & HONDA, K. (1972) · Nature · doi:10.1038/238037a0 · Cited by 34,169
Atomically Thin MoS 2 : A New Direct-Gap Semiconductor
Mak, K. F., Lee, C., Hone, J., Shan, J., & Heinz, T. F. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.136805 · Cited by 15,586
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Self-citationWalter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
Research works printed but not linked: 5
- Liu Y., 2013, Int. J. Photoenergy, 2013, 247516
- Min S., 2012, J. Phys. Chem. B, 116, 25415
- Troostwijk A. P. v., 1789, Obs. Phys., 35, 369
- 10.1021/ja404523s · DOI · Paper page
- 10.1039/C3TA13584E · DOI · Paper page
Cited by
Items 801–900 of 1,459
Xia, Y., Liang, R., Yang, M., et al. (2021) · Nanomaterials · doi:10.3390/nano11102762 · Cited by 28
Zhao, H., Zhu, Y., Li, F., Hao, R., Wang, S., & Guo, L. (2017) · Angewandte Chemie · doi:10.1002/ange.201703871 · Cited by 28
Zhang, J., Zhang, D., Zhang, R., Zhang, N., Cui, C., Zhang, J., Jiang, B., Yuan, B., Wang, T., Xie, H., et al. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.7b00099 · Cited by 29
Zhang, X., Dong, Q., Li, Z., et al. (2022) · Materials Research Letters · doi:10.1080/21663831.2022.2065893 · Cited by 27
Photoelectrochemical water splitting based on chalcopyrite semiconductors: A review
Khodabandeh, F., Abdizadeh, H., Avanaki, A. A., & Golobostanfard, M. R. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.03.378 · Cited by 29
Sasidharan, S., Nair, S. V. S., Sudhakaran, A., & Rijith, S. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04437 · Cited by 26
Palanisamy, S., Prabu, P., Subramani, K., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.118 · Cited by 27
Hirsch, A., & Hauke, F. (2017) · Angewandte Chemie · doi:10.1002/ange.201708211 · Cited by 28
Popple, D., Schriber⧓, E. A., Yeung, M., & Hohman, J. N. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b03282 · Cited by 31
Mwizerwa, J. P., Liu, C., Xu, K., Zhao, N., Chen, Z., & Shen, J. J. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.163639 · Cited by 27
Anisotropic heteronanocrystals of Cu2O–2D MoS2 for efficient visible light driven photocatalysis
Yu, E.-J., Kim, H. C., Kim, H. J., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148159 · Cited by 27
Fabrication of MoSe2/Bi3O4Br Z-scheme heterojunction with enhanced photocatalytic performance
Wang, F., Lu, T., Cheng, X., Zhang, Y., & Xiao, X. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.111991 · Cited by 35
Hybrid of AgInZnS and MoS 2 as efficient visible-light driven photocatalyst for hydrogen production
Huang, T., Chen, W., Liu, T., Hao, Q., & Liu, X. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.03.210 · Cited by 28
Sarker, S., Peters, J., Chen, X., Li, B., Chen, G., Yan, L., Richins, S. K., Das, S., Zhou, M., & Luo, H. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00208 · Cited by 27
Jadan Resnik Jaleel, U. C., Madhushree, R., R, S. D. K., et al. (2022) · Photochem · doi:10.3390/photochem2030042 · Cited by 27
“The large surface energy in MoS2 makes it prone to aggregation, which can adversely impact its stability and efficiency as a catalyst [21,22].”
BackgroundAggarwal, P., Sarkar, D., Menezes, P. W., & Awasthi, K. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.08.113 · Cited by 27
Bharath, G., Rambabu, K., Alqassem, B., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.141062 · Cited by 27
Advances and challenges in photocatalytic water splitting: recent developments and trends
Anwar, S., Aslam, Z., Aslam, U., Mehmood, U., Rana, A. G., Mahmood, N., & Rafique, A. (2025) · Fuel · doi:10.1016/j.fuel.2025.136280 · Cited by 34
Zhang, S., Chen, L., Shen, J., Li, Z., Wu, Z., Feng, W., Xu, K., Xu, D., Chen, X., & Zhang, S. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.027 · Cited by 26
Safdari, F., Shamkhali, A. N., Tafazzoli, M., & Parsafar, G. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.03.114 · Cited by 26
Yuan, F., Liu, Z., Qin, G., & Ni, Y. (2020) · Dalton Transactions · doi:10.1039/d0dt03014g · Cited by 26
Phase Transition-Promoted Hydrogen Evolution Performance of MoS2/VO2 Hybrids
Chen, G., Zhang, X., Guan, L., Zhang, H., Xie, X., Chen, S., & Tao, J. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12040 · Cited by 26
Self-citationGao, Y., Zhang, S., Wu, Y., et al. (2019) · Journal of Catalysis · doi:10.1016/j.jcat.2019.06.017 · Cited by 26
Jin, H., You, N., Yu, Z., Zhou, G., & Xu, X. (2016) · Journal of Applied Physics · doi:10.1063/1.4961036 · Cited by 27
Kareem, A., Theyagarajan, K., Thenmozhi, K., Pitchaimuthu, S., & Senthilkumar, S. (2025) · Advanced Sustainable Systems · doi:10.1002/adsu.202501270 · Cited by 33
Abdolmaleki, A., Mohamadi, Z., Ensafi, A. A., Atashbar, N. Z., & Rezaei, B. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.03.142 · Cited by 26
Qiao, H., Li, Z., Liu, F., Ma, Q., Ren, X., Huang, Z., Liu, H., Deng, J., Zhang, Y., Liu, Y., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c21421 · Cited by 27
Self-citationLv, Y., Liu, Y., Chen, C., Wang, T., & Zhang, M. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.05.145 · Cited by 26
Facile one-step exfoliation of large-size 2D materials via simply shearing in triethanolamine
Chen, H., Liu, B., Yang, Q., et al. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.04.066 · Cited by 26
MXene‐Based Flexible Memory and Neuromorphic Devices
Li, Y., Ding, G., Zhai, Y., Lv, Z., Yan, Y., Xue, S., Zhou, K., Zhang, M., Zhang, Y., Sun, Q., et al. (2025) · Small · doi:10.1002/smll.202410914 · Cited by 35
Trimetallic Zn–Co–Ni Selenide Nanoparticles as Electrocatalysts for the Hydrogen Evolution Reaction
Kareem, A., Mohanty, H., Thenmozhi, K., Pitchaimuthu, S., & Senthilkumar, S. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c05665 · Cited by 27
Yan, L., Ren, Y., Shen, J., Wang, H., Ning, J., Zhong, Y., & Hu, Y. M. (2020) · Energy Technology · doi:10.1002/ente.202000607 · Cited by 25
Baek, J., Umeyama, T., Choi, W., Tsutsui, Y., Yamada, H., Seki, S., & Imahori, H. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201703699 · Cited by 28
Surface activation of MnNb2O6 nanosheets by oxalic acid for enhanced photocatalysis
Wu, J., Wang, J., Li, H., Li, Y., Du, Y., Yang, Y., & Jia, X. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.170 · Cited by 25
Tian, X., Cai, Z., Sun, Y., et al. (2024) · Surfaces and Interfaces · doi:10.1016/j.surfin.2024.104919 · Cited by 25
Sharma, S. K., Khatri, N., Puri, S., Adhikari, M., Wagle, P., McIlroy, D. N., Kalkan, A. K., & Vasquez, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09660 · Cited by 26
Facile Synthesis of Two Dimensional (2D) V2O5 Nanosheets Film towards Photodetectors
Wang, S., Wu, L., Zhang, H., Wang, Z., Qin, Q., Wang, X., Lu, Y., Li, L., & Li, M. (2022) · Materials · doi:10.3390/ma15238313 · Cited by 24
Self-citationTemplated‐Construction of Hollow MoS 2 Architectures with Improved Photoresponses
Gao, C., Han, Y., Zhang, K., Wei, T., Jiang, Z., Wei, Y., Yin, L., Piccinelli, F., Yao, C., Xie, X., et al. (2020) · Advanced Science · doi:10.1002/advs.202002444 · Cited by 25
Rehman, S. U., Tariq, Z., Butt, F. K., et al. (2022) · Solar Energy · doi:10.1016/j.solener.2022.06.014 · Cited by 25
Thayil, R., & Cherukulappurath, S. (2023) · Nano Express · doi:10.1088/2632-959x/acef43 · Cited by 25
Co 4 N–WN x composite for efficient piezocatalytic hydrogen evolution
Yu, J., Guo, H., Feng, W., Guo, X., Zhu, Y., Thomas, T., Jiang, C., Liu, S., & Yang, M. (2022) · Dalton Transactions · doi:10.1039/d2dt00381c · Cited by 25
Lin, B., Ma, B., Chen, J., Zhou, Y., Zhou, J., Yan, X., Xue, C., Luo, X. D., Liu, Q., Wang, J., et al. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2021.07.015 · Cited by 25
Rani, M., Murtaza, M., Amjad, A. A., et al. (2023) · Catalysts · doi:10.3390/catal13060929 · Cited by 25
Fiaz, M., & Athar, M. (2019) · ChemistrySelect · doi:10.1002/slct.201901818 · Cited by 23
Chia, H. L., Mayorga‐Martinez, C. C., Sofer, Z., Lazar, P., Webster, R. D., & Pumera, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202009083 · Cited by 24
Liu, J., Chen, K., Pan, G., Luo, Z., Xie, Y. H., Li, Y., Lin, Y., Hao, Z.-H., Zhou, L., Ding, S., et al. (2018) · Nanoscale · doi:10.1039/c8nr07013j · Cited by 24
A Decade of Electrocatalysis with Metal Aerogels: A Perspective
Li, W., Weng, B., Sun, X., Cai, B., Hübner, R., Luo, Y., & Du, R. (2023) · Catalysts · doi:10.3390/catal13010167 · Cited by 29
Liu, Z., Cao, X., Wang, B., Xia, M., Lin, S., Guo, Z., Zhang, X., & Gao, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.088 · Cited by 24
Li, Q., Qiao, X.-Q., Jia, Y., Hou, D., & Li, D. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b01582 · Cited by 24
Synthesis and catalytic application of nanostructured metal oxides and phosphates
Kamata, K., Aihara, T., & Wachi, K. (2024) · Chemical Communications · doi:10.1039/d4cc03233k · Cited by 26
Zhang, S., Li, X., Zhang, X., Wang, X., Wang, W., Yu, R., Cao, Y., Zhang, D., Wang, S., He, L., et al. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00682 · Cited by 23
Das, S., Swain, G., & Parida, K. M. (2022) · Sustainable Energy & Fuels · doi:10.1039/d1se01690c · Cited by 28
Wang, B., Wu, X., Zhang, X., Pang, G., & Li, S. (2019) · New Journal of Chemistry · doi:10.1039/c9nj05220h · Cited by 24
Bera, S., Kumari, A., Ghosh, S., & Basu, R. N. (2021) · Nanotechnology · doi:10.1088/1361-6528/abe152 · Cited by 26
“…consisting of single or few-atom thick covalently bonded lattices have attracted immense interest in photocatalysis due to some unique properties, such as optical, electrical, photonic, mechanical, catalytic etc which are originated from two-dimensional ( 2D ) layered structure [ 36, 37 ] .”
Heterostructured 2D material-based electro-/photo-catalysts for water splitting
Heo, E., Lee, S. M., & Yoon, H. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00566f · Cited by 25
Mei, Y., Li, H., Cong, Y., Huang, S., Xu, W., Qian, J., & Li, T. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.08.171 · Cited by 23
Wu, M., Ke, S.-Q., Chen, W., Zhang, S., Zhu, M. H., Zhang, Y., Foo, M. L., & Tang, L. (2019) · Catalysis Science & Technology · doi:10.1039/c9cy01900f · Cited by 22
Wang, J., Lim, Y., & Ho, G. W. (2017) · ChemCatChem · doi:10.1002/cctc.201700865 · Cited by 23
Liao, F., Jiang, B., Shen, W., Chen, Y., Li, Y., Shen, Y., Yin, K., & Shao, M. (2019) · ChemCatChem · doi:10.1002/cctc.201900241 · Cited by 23
Ferdous, N., Islam, M. S., Biney, J., et al. (2022) · Scientific Reports · doi:10.1038/s41598-022-24663-y · Cited by 23
Kumar, D. P., Rangappa, A. P., Kim, S., Kim, E., Reddy, K. A. J., Gopannagari, M., Bhavani, P., Reddy, D. A., & Kim, T. K. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.05.214 · Cited by 24
Rose, A. H., Dunklin, J. R., Zhang, H., Merlo, J. M., & van de Lagemaat, J. (2020) · ACS Photonics · doi:10.1021/acsphotonics.0c00233 · Cited by 23
Self-citationMa, C., Jiang, M., Yang, C., et al. (2022) · ACS Omega · doi:10.1021/acsomega.2c00476 · Cited by 23
Chouki, T., Donkova, B., Aktarla, B., Stefanov, P., & Emin, S. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101976 · Cited by 29
Nguyen, V., Lee, G.-J., Ngo, Q., Omelianovych, O., Nguyen, N.-A., Trinh, V.-H., Choi, H., Mnoyan, A., Lee, K., Larina, L. L., et al. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.139332 · Cited by 21
Cao, Y., Wu, Y., Badie, C., Cadot, S., Camp, C., Quadrelli, E. A., & Bachmann, J. (2019) · ACS Omega · doi:10.1021/acsomega.9b00322 · Cited by 30
Structural, chemical, and electrical parameters of Au/MoS2/n-GaAs metal/2D/3D hybrid heterojunction
Padma, R., Lee, G., Kang, J. S., & Jun, S. C. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.04.061 · Cited by 23
Energy Storage Performance Enhancement by Surface Engineering of Electrode Materials
Xu, J. P., Jia, G., Mai, W., & Fan, H. J. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600430 · Cited by 24
Lee, M. K., Choi, S., Park, H., Lee, T. H., Lee, S. A., Yang, J. W., Su, J., Cheon, W. S., Ahn, . H., Kim, S. Y., et al. (2023) · Energy Technology · doi:10.1002/ente.202201203 · Cited by 25
Shen, J., Liu, J., Fan, X., Liu, H., Bao, Y., Hui, A., & Munir, H. A. (2024) · Biomaterials Science · doi:10.1039/d3bm01030a · Cited by 28
Kumar, U., Chakraborty, S. D., Sahu, R. K., et al. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202101680 · Cited by 23
Silver nanoparticles-sensitized cobalt complex for highly-efficient photocatalytic activity
Huo, J., & Zeng, H. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.06.047 · Cited by 23
Band alignment of Zr 2 CO 2 /MoS 2 heterostructures under an electric field
Chen, Z., Ma, X., Hu, J., et al. (2021) · New Journal of Chemistry · doi:10.1039/d1nj02440j · Cited by 23
2D nanocomposite materials for HER electrocatalysts - a review
Bazghale, F. S., Gilak, M. R., Pedram, M. Z., Torabi, F., & Naikoo, G. A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e23450 · Cited by 29
“Although despite weak activities have weak activities, they are catalytically active toward HER even if no alteration is detected [52,101–103].”
BackgroundDirect Imaging of Individual Molecular Binding to Clean Nanopore Edges in 2D Monolayer MoS2
Gerkman, M. A., Lee, J. K., Li, X., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b06061 · Cited by 22
Sun, J., Chen, Y., Huang, K., Li, K., & Wang, Q. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144052 · Cited by 23
Pan, L. Y., Wan, Y.-L., Wang, Z., Geng, H.-Y., & Chen, X.-R. (2023) · Journal of Applied Physics · doi:10.1063/5.0164167 · Cited by 22
Optical functional nanomaterials for cancer photoimmunotherapy
Liu, L., Pan, Y., Ye, L., Liang, C., Mou, X., Dong, X., & Cai, Y. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.216006 · Cited by 23
Atomic‐ and Molecular‐Level Functionalizations of Polymeric Carbon Nitride for Solar Fuel Production
Zhen, W., & Xue, C. (2020) · Solar RRL · doi:10.1002/solr.202000440 · Cited by 23
Li, Q., Pan, C., Huang, H., Wang, L., & Zhu, X. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.03.158 · Cited by 21
Jiang, X., Wang, Z., Gao, Q., Xu, X., Li, D., Cui, B., & Liu, D. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.10.100 · Cited by 24
Fan, Y., Wang, J., Zhang, Z., Ma, X., & Zhao, M. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c01701 · Cited by 22
Understanding Surface Modulation to Improve the Photo/Electrocatalysts for Water Oxidation/Reduction
Cho, Y., Le, T. A., & Lee, H. (2020) · Molecules · doi:10.3390/molecules25081965 · Cited by 22
Muhmood, T., Xia, M., Wu, L., Wang, F., & Mahmood, A. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.09.002 · Cited by 22
Pei, C., Li, X., Fan, H., Wang, J., You, H., Yang, P., Wei, C., Wang, S., Shen, X., & Li, H. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c00406 · Cited by 22
Zhao, J., Zhu, M. H., Pang, Y., et al. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100988 · Cited by 22
Tunable n-type and p-type doping of two-dimensional layered PdSe 2 via organic molecular adsorption
Gao, Y., Liu, X., Hu, W., et al. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp01484b · Cited by 22
Robust approach towards wearable power efficient transistors with low subthreshold swing
Elahi, E., Suleman, M., Nisar, S., Sharma, P. R., Iqbal, M. W., Patil, S. A., Kim, H., Abbas, S., Chavan, V. D., Dastgeer, G., et al. (2022) · Materials Today Physics · doi:10.1016/j.mtphys.2022.100943 · Cited by 24
A promising and new single-atom catalyst for CO oxidation: Si-embedded MoS2 monolayer
Esrafili, M. D., & Heydari, S. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.109123 · Cited by 22
Song, X., Zhang, Y., Ren, X., Zhang, X., Tang, D., Wu, J., & Li, X. (2023) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2023.134439 · Cited by 22
Guo, H., Liu, J., Luo, B., et al. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc01624e · Cited by 22
Marandi, M., & Torabi, N. (2020) · Optical Materials · doi:10.1016/j.optmat.2020.109918 · Cited by 22
Wang, D., Li, H., Du, N., Lang, Z., Hu, T., & Hou, W. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.01.079 · Cited by 22
Peng, S.-M., Patil, S. B., Chang, C., Chang, S.-T., Chen, Y., Wu, K., Su, W.-N. J., Hwang, B., & Wang, D. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta06517g · Cited by 23
Yan, P., She, X., Zhu, X., Xu, L., Qian, J., Xia, J., Zhang, J., Xu, H. F., Li, H., & Li, H. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.145085 · Cited by 21
Yang, D., Eglitis, R. I., Yi, Z., Liu, C.-S., & Jia, R. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc02345h · Cited by 23
Lai, L., Wu, H., Mao, G., et al. (2022) · Coatings · doi:10.3390/coatings12101488 · Cited by 22
Carbon Nitride Co-catalyst Activation Using N-Doped Carbon with Enhanced Photocatalytic H2 Evolution
Wang, J., Zhou, Q. X., Shen, Y., Chen, X., Liu, S., & Zhang, Y. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01796 · Cited by 22
Tian, L., Liu, H., Yi, X., Wang, X., Pang, L., & Li, J. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.03.217 · Cited by 21
1D/2D CdS/WS2 heterojunction photocatalyst: First-principles insights for hydrogen production
Jiang, M., Xu, J., Munroe, P. R., & Xie, Z. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105991 · Cited by 25
Metadata
- Authors
- Lu, Q., Yu, Y., Ma, Q., Chen, B., & Zhang, H.
- Affiliations
- Nanyang Technological University (SG)
- Corresponding author
- Zhang, Hua
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2015-12-16
- Volume
- 28
- Issue
- 10
- Pages
- 1917-1933
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2214476518
- Semantic Scholar
- ddba352ca303d4f19381c3bacbb320e50b21f891
- Cited by
- 1,447
- References
- 190
- Citations by year
- 2026: 46 · 2025: 85 · 2024: 105 · 2023: 113 · 2022: 150 · 2021: 161 · 2020: 195 · 2019: 181 · 2018: 186 · 2017: 157 · 2016: 67
- FWCI
- 40.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- DR-NTU (Nanyang Technological University) (submittedVersion)
- Funders
- NTU (M4081296.070.500000)
- iFood Research (M4081458.070.500000)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Keywords
- hydrogen evolution reaction, transition metal dichalcogenides, photocatalytic hydrogen evolution, electrocatalytic hydrogen evolution, water splitting, noble metal-free catalysts, hybrid nanostructures, synthesis methods
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.