Wearables in Medicine
Open accessThe DOI matches its Crossref record; 258 of the 258 references it cites were found in a registry or an index; 59 of the 218 sources its claims cite were checked for support.
Abstract
Wearables as medical technologies are becoming an integral part of personal analytics, measuring physical status, recording physiological parameters, or informing schedule for medication. These continuously evolving technology platforms do not only promise to help people pursue a healthier life style, but also provide continuous medical data for actively tracking metabolic status, diagnosis, and treatment. Advances in the miniaturization of flexible electronics, electrochemical biosensors, microfluidics, and artificial intelligence algorithms have led to wearable devices that can generate real-time medical data within the Internet of things. These flexible devices can be configured to make conformal contact with epidermal, ocular, intracochlear, and dental interfaces to collect biochemical or electrophysiological signals. This article discusses consumer trends in wearable electronics, commercial and emerging devices, and fabrication methods. It also reviews real-time monitoring of vital signs using biosensors, stimuli-responsive materials for drug delivery, and closed-loop theranostic systems. It covers future challenges in augmented, virtual, and mixed reality, communication modes, energy management, displays, conformity, and data safety. The development of patient-oriented wearable technologies and their incorporation in randomized clinical trials will facilitate the design of safe and effective approaches.
Overview
CoChat Summary
## TL;DR
This review surveys wearable technologies in medicine, focusing on sensing, data handling, drug delivery, and clinical translation. It argues that wearables are moving toward real-time, closed-loop patient care, but major barriers remain in calibration, power, biocompatibility, data security, and clinical validation.
## Key findings
- The paper frames wearables as medical technologies for continuous tracking of physical and biochemical status, with interfaces spanning epidermal, ocular, intracochlear, and dental sites.
- It reports several performance examples from the literature, including embroidered textile glucose sensors that shifted current by 0.9 mA as glucose increased from 0 to 40 mmol L−1, and textiled Na+/K+ sensors with a limit of detection of ≈10−5 m.
- For in vivo sensing, it notes a saliva bacteria-detection device with a detection limit of ≈100 cells, and contact-lens glucose sensing in rabbits with a 10 min delay and in vivo sensitivity of 40 × 10−6 m.
- Market figures cited in the paper include 125 million wearable device units sold in 2016 (55% more than 2015), projected sales of 237 million by 2020, and $33B in industry revenue in 2016.
## Methods
- This is a narrative review of wearable medicine, covering consumer trends, commercial and emerging devices, fabrication methods, biosensing, drug delivery, closed-loop theranostics, and regulatory issues.
- The paper synthesizes examples drawn from prior studies across device classes such as textiles, tattoos, contact lenses, shoes, hearing aids, glucose monitors, and virtual reality systems; no new dataset is reported.
- Its analysis is descriptive and comparative, using reported device metrics, market statistics, and regulatory examples rather than a single experimental protocol.
## Limitations
- The paper states that limitations in existing sensing technologies include sensor drift from biofouling, frequent calibration, biweekly replacement, and relatively high cost; it also notes that real-time signal/data processing requires continuous power.
- It states that wearable treatment approaches are limited by poor integration and miniaturization, low biocompatibility, insufficient conformal contact, inefficient energy use, and short lifetime.
- It explicitly says that controlled studies are required for performance evaluation, and that the effects of continuous electromagnetic exposure from wearables on human tissues “warrant further research.”
- Evident from the text: the paper is a review, so its conclusions depend on previously published studies rather than a unified prospective clinical dataset.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
13 Valid · 46 Not valid · 153 Not checked · 68 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“In another study, polyurethane‐based ion‐selective membranes were integrated with textile‐based potentiometric sensors to create stretchable diagnostic devices.35”
§ Wearables in Medicine > The Rise of Personalized Medicine > Sensory Information in Wearables
What the sources say
- Disputedcites [35] sourceExperimental — accuracy not yet measured
The Methods section (“Printing and functionalization of Chem–Phys hybrid patch”; page unavailable) describes an amperometric lactate sensor and ECG electrodes printed on a flexible polyester substrate, not polyurethane-based ion-selective membranes integrated with textile potentiometric sensors. The Results section (“Hybrid patch design rationale and fabrication”; page unavailable) calls the device flexible, but does not describe it as the stretchable textile device claimed. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“The concentrations of monovalent metal ions (Na+ and K+) as well as glucose and lactate were continuously monitored in a human subject while exercising with a constant load.”
§ Wearables in Medicine > The Rise of Personalized Medicine > Sensory Information in Wearables
What the sources say
- Disputedcites [28] sourceExperimental — accuracy not yet measured
The on-body evaluation (Chemicals and Instruments; page unavailable) describes measuring ethanol in sweat before and after alcohol consumption, not monitoring Na+, K+, glucose, and lactate during exercise. Glucose and lactate appear in an in-vitro interference test (Chemicals and Instruments; page unavailable), rather than as continuously monitored concentrations in a human subject. (LLM, conf=0.88)
Checked by a reasoning model — may be wrong.
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“In one such study, piezoresistive pressure sensors were knitted in a sock to wirelessly measure gate and plantar pressure up to 500 kPa.43”
§ Wearables in Medicine > The Rise of Personalized Medicine > Sensory Information in Wearables
What the sources say
- Disputedcites [43] sourceExperimental — accuracy not yet measured
The Abstract and Conclusions identify this study as developing temperature sensors on single yarns to monitor skin temperature. They describe a different device from the claimed piezoresistive pressure-sensing sock; the paper does not report wireless gait or plantar-pressure measurements up to 500 kPa. (LLM, conf=0.85)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
Some cited sources support this claim and some don’t — read each source’s verdict below.
In the paper
“Other sensors integrated within textiles have been utilized for physiological monitoring such as respiration,36 heart rate,37 and temperature measurements.38”
§ Wearables in Medicine > The Rise of Personalized Medicine > Sensory Information in Wearables
What the sources say
- Disputedcites [36] sourceExperimental — accuracy not yet measured
Citation 38 is attached to temperature measurements. The Introduction describes the paper’s fibers as sensors for epidermal pH, and the Results and Discussions report pH measurements from a wearable patch—not temperature measurements from a textile-integrated sensor. No page numbers are available in our copy. (LLM, conf=0.84)
Checked by a reasoning model — may be wrong.
- Partly supportedcites [37] sourceExperimental — accuracy not yet measured
The 'SiNR mechanical sensors with site-specific sensitivity' section describes temperature-sensor arrays on prosthetic skin and reports temperature monitoring when a prosthetic hand touches a hot cup (page unavailable). It does not describe sensors integrated within textiles or using them to monitor a person's physiological temperature. Citation 38 attaches to temperature measurements, not to respiration or heart rate. (LLM, conf=0.87)
- Could not verifycites [38] sourceExperimental — accuracy not yet measured
Citation 38 is attached to temperature measurements. The Results and Methods passages describe pressure sensing, while the Abstract mentions health-monitoring applications; none describes a textile-integrated sensor used to measure temperature. Searches for temperature measurement and textile-based physiological monitoring found no supporting passage in our copy. (LLM, conf=0.76)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“This contact lens sensor provided readouts up to 288 measurements within 24 h.”
§ Wearables in Medicine > The Rise of Personalized Medicine > Sensory Information in Wearables
What the sources say
- Disputedcites [54] sourceExperimental — accuracy not yet measured
The tooth-platform figure describes a graphene wireless sensor transferred onto a tooth, not a contact lens. The References section lists a separate contact-lens study, but our copy does not report 288 measurements in 24 hours for that study or for this sensor. (LLM, conf=0.87)
Checked by a reasoning model — may be wrong.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
130 more claims · 17 with their cited sources checked
Create a free account to see all 280 claims and to verify the 19 references still open.
- Probably not a substantial claim. 97
- It may state two separate claims as one. 81
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Physiologic data obtained from wearables are of limited clinical utility when viewed in isolation.”
From Unlocking Tomorrow’s Health Care: Expanding the Clinical Scope of Wearables by Applying Artificial Intelligence (2024) · cites this paper as [4]
In the citing paper
“HR measuring using PPG is well characterized and works seamlessly; however, we must take into account that the amount of data processing for healthcare applications is large and requires considerable computing power and continuous energy supply [11].”
From The Current State of Optical Sensors in Medical Wearables (2022) · cites this paper as [11]
In the citing paper
“All wearable biochemical sensors have some limitations, such as frequent calibration, readout drift due to biofouling, and biweekly sensor replacement [11].”
From The Current State of Optical Sensors in Medical Wearables (2022) · cites this paper as [11]
Citations
Cites
‘Small Changes' to Diet and Physical Activity Behaviors for Weight Management
Hills, A. P., Byrne, N. M., Lindstrom, R., & Hill, J. O. (2013) · Obesity Facts · doi:10.1159/000345030 · Cited by 9,493
Defining virtual reality: Dimensions determining telepresence
Steuer, J. (1992) · Journal of Communication · doi:10.1111/j.1460-2466.1992.tb00812.x · Cited by 5,459
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Private traits and attributes are predictable from digital records of human behavior
Kosinski, M., Stillwell, D., & Graepel, T. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1218772110 · Cited by 2,829
A review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Pimputkar, S., Speck, J. S., DenBaars, S. P., & Nakamura, S. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.32 · Cited by 2,196
Wearable Electronics and Smart Textiles: A Critical Review
Stoppa, M., & Chiolerio, A. (2014) · Sensors · doi:10.3390/s140711957 · Cited by 2,107
Using Pedometers to Increase Physical Activity and Improve Health: A Systematic Review
Bravata, D. M., Smith-Spangler, C., Sundaram, V., Gienger, A. L., Lin, N., Lewis, R., Stave, C. D., Olkin, I., & Sirard, J. R. (2007) · JAMA · doi:10.1001/jama.298.19.2296 · Cited by 2,064
Research works printed but not linked: 64
- Gaikwad G., 2017, Proc. of the 2017 Conf. on Interaction Design and Children
- 2014, Global Status Report on Alcohol and Health, Management of Substance Abuse Unit
- 2009, Bactrack Select Breathalyzer S80 Owner's Manual
- Kong K., 2008, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems
- Gatto A., 2014, IEEE/ASME 10th Int. Conf. on Mechatronic and Embedded Systems and Applications
- Oks A., 2016, XIV Mediterranean Conf. on Medical and Biological Engineering and Computing 2016
- Perrier A., 2014, Innov. Res. BioMed. Eng., 35, 72
- Castano L., 2009, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems
- Megraud F., 1994, Aliment Pharmacol. Ther., 9, 85
- Tseng C.‐K., 2012, 2012 IEEE Sensors
- Liao Y., 2011, Int. Solid‐State Circuits Conf
- Yetisen A. K., 2014, Appl. Phys. Lett., 105
- Yetisen A. K., 2015, Biotechnol. Adv.
- Jiang N., 2017, Adv. Funct. Mater., 1702715
- Chen F., 2009, SIGMETRICS ‘09, Proceedings of the Eleventh International Joint Conference on Measurement and Modeling of Computer Systems
- Pandian P., 2016, 2016 Int. Conf. on Signal Processing and Communication (ICSC)
- Chinaei M. H., 2017, A World of Wireless, Mobile and Multimedia Networks (WoWMoM), IEEE 18th Int. Symp
- Nair K., 2015, 2015 Int. Conf. on Green Computing and Internet of Things (ICGCIoT)
- Yoon Y., 2016, Advances in Services Computing: 10th Asia‐Pacific Services Computing Conf
- Faragher R., 2014, Proc.of the 27th Int. Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS+'14)
- Ray P. P., 2016, 2016 Int. Conf. on Signal Processing, Communication
- Samuel S. S. I., 2016, 3rd MEC Int. Conf. on Big Data and Smart City (ICBDSC)
- Zhang H., 2017, IEEE/ACM 39th International Conference on Software Engineering
- Chauhan J., 2016, Int. Conf. on Pervasive Computing and Communication Workshops (PerCom Workshops)
- Panic G., 2010, 17th IEEE Int. Conf. on Electronics
- Emnett F., 2000, SNUG
- 2011, A Multi‐Core CPU Architecture for Low Power and High Performance
- Venkataramanan M., 2016, Wired UK
- Kim J., 2013, 35th Annual Int. Conf. of the IEEE Engineering in Medicine and Biology Society (EMBC)
- Revadigar G., 2016, IEEE Int. Conf. on Pervasive Computing and Communication Workshops
- Rohloff K., 2015, 17th Int. Conf. on E‐health Networking, Application & Services
- Bisgaard N., 2015, Audio Engineering Society Conf.: 58th Int. Conf. on Music Induced Hearing Disorders
- Yetisen A. K., 2017, Adv. Mater., 29
- Opdyke D., 1995, Am. J. Psychiatry, 1, 626
- Aman M. G., 1985, Am. J. Ment. Defic., 89, 485
- Washington P., 2016, Proc. of the 2016 CHI Conf. Extended Abstracts on Human Factors in Computing Systems
- Luprano J., 2006, Int. Workshop on Wearable and Implantable Body Sensor Networks
- Han H., 2007, 29th Annual Int. Conf. of the IEEE Engineering in Medicine and Biology Society (EMBS)
- Raya M. A. D., 2002, Engineering in Medicine and Biology: 24th Annual Conf. and the Annual Fall Meeting of the Biomedical Engineering Society
- Shaji S., 2016, Proc. of the Second Int. Conf. on Computer and Communication Technologies, 21
- Zhang F., 2009, Biomedical Circuits and Systems Conf
- Yoon U.‐J., 2010, Int. Conf. on Wavelet Analysis and Pattern Recognition (ICWAPR)
- Helleputte N., 2014, IEEE Int. Solid‐State Circuits Conf. Digest of Technical Papers
- Lahiri K., 2002, Proc. of the 2002 Asia and South Pacific Design Automation Conference
- Bodine K., 2003, Proc. of the Seventh IEEE Int. Symp. on Wearable Computers (ISWC'03)
- 2016, Driven by Strong Smartwatch Growth and the Emergence of Smarter Watches
- 2017, Worldwide Quarterly Wearable Device Tracker
- 2017, The Cisco Visual Networking Index (VNI) Global Mobile Data Traffic Forecast Update
- Worldwide Wearables Forecast by Product Type, 2017, Mobile Device Trackers
- 2014, The Wearable Future
- Poupyrev I., 2016, Proc. of the 2016 CHI Conf. on Human Factors in Computing Systems
- Hayward J., 2017, Wearable Technology 2017–2027: Markets
- 2015, Mobile Medical Applications: Guidance for Industry and Food and Drug Administration Staff
- 2013, Report on Smart Wearable Devices: Fitness, Healthcare
- Chen Z., 2014, Proc. of the 2014 ACM Int. Joint Conf. on Pervasive and Ubiquitous Computing: Adjunct Publication
- Arora S., 2014, Int. Conf. on Acoustics
- Morgan P., 2012, J. Sleep Res., 21, 217
- Landry G. J., 2015, Front. Aging Neurosci., 7, 165
- Alstad Z., 2016, CHI 2016
- 2015, Exploratory Study of Biotelemetry in Amyotrophic Lateral Sclerosis
- Jo E., 2016, Validation of the Fitbit® Surge™ and Charge HR™ Fitness Trackers
- Segall B., 2016, Sometimes Your Fitness Tracker Lies—A Lot
- Brynjarsdottir H., 2012, Proc. of the SIGCHI Conf. on Human Factors in Computing Systems
- Ledger D., 2014, Inside Wearables, How the Science of Human Behavior Change Offers the Secret to Long‐Term Engagement
Cited by
Items 201–300 of 556
Parachute shape ultra‐wideband wearable antenna for remote health care monitoring
Singh, V. K., Bangari, N., Ali, Z., et al. (2023) · International Journal of Communication Systems · doi:10.1002/dac.5488 · Cited by 30
“Over the last few years, flexible antennas have been used for producing microwave imaging by placing on the human body surface for biomedical applications.(19,20) Due to the difference in dielectric properties of healthy and malignant tissues, the electromagnetic waves interact and generate different microwave images.”
BackgroundA topical review on AI-interlinked biodomain sensors for multi-purpose applications
Thapa, R., Poudel, S., Krukiewicz, K., & Kunwar, A. (2024) · Measurement · doi:10.1016/j.measurement.2024.114123 · Cited by 38
Ultraflexible all-organic complementary transistors and inverters based on printed polymers
Stucchi, E., Scaccabarozzi, A. D., Viola, F. A., & Caironi, M. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03064c · Cited by 30
Stretchable Composite Conductive Fibers for Wearables
Zhang, Y., Zhang, Y., Zhou, J., Zhang, D., Lin, H., Chen, Y., Li, Y., & Xiong, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202201442 · Cited by 31
Ultraflexible tattoo electrodes for epidermal and in vivo electrophysiological recording
Wei, B., Wang, Z., Guo, H., Xie, F., Cheng, S., Lou, Z., Zhou, C., Ji, H., Zhang, M., Wang, X., et al. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101335 · Cited by 36
Sensing the future with graphene-based wearable sensors: A review
Chowdhury, M. K. H., Anik, H. R., Akter, M., Hasan, M., Tushar, S. I., Mahmud, S., Nahar, N., & Tania, I. S. (2024) · Results in Materials · doi:10.1016/j.rinma.2024.100646 · Cited by 43
Selamneni, V., Barya, P., Deshpande, N., & Sahatiya, P. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2935383 · Cited by 29
“Currently, most of the sensors are fabricated using complex fabrication technology [6].”
BackgroundCost-Effective Printed Electrodes Based on Emerging Materials Applied to Biosignal Acquisition
Toral, V., Castillo, E., Albretch, A., Romero, F. J., García, A., Rodríguez, N., Lugli, P., Morales, D. P., & Rivadeneyra, A. (2020) · IEEE Access · doi:10.1109/access.2020.3008945 · Cited by 29
“Thus, wearables to acquire this type of signals are key to improve medical systems and patient wellness [8], [9], and can be even used in innovative applications, such as attention monitoring [10].”
BackgroundBuaki-Sogó, M., García‐Carmona, L., Gil‐Agustí, M., García-Pellicer, M., & Quijano-López, A. (2021) · Nanomaterials · doi:10.3390/nano11082052 · Cited by 27
“There are many types of wearable devices, including smartwatches, wristbands, hearing aids, electronic/optical tattoos, head-mounted displays, subcutaneous sensors, electronic footwear, and electronic textiles [3].”
BackgroundAmbient nano RF-Energy driven self-powered wearable multimodal real-time health monitoring
Liao, Y., Tian, S. F., Li, Y., Li, L., Chen, X., Chen, J., Yang, F., & Gao, M. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109915 · Cited by 32
Leal-Neto, O. B., Haenni, S., Phuka, J. C., Ozella, L., Paolotti, D., Cattuto, C., Robles, D., & Lichand, G. (2021) · JMIR Public Health and Surveillance · doi:10.2196/23154 · Cited by 28
Design of Smart Steering Wheel for Unobtrusive Health and Drowsiness Monitoring
Babušiak, B., Hajdučík, A., Medvecký, Š., Lukáč, M., & Klarák, J. (2021) · Sensors · doi:10.3390/s21165285 · Cited by 34
“They can provide continuous health data on metabolic status, diagnosis, or treatment [9].”
BackgroundLiquid metal-polymer conductor-based wireless, battery-free epidermal patch
Mou, L., Xia, Y., & Jiang, X. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113765 · Cited by 30
Review—Current Trends in Disposable Graphene-Based Printed Electrode for Electrochemical Biosensors
Jagannathan, M., Durgalakshmi, D., & Rakkesh, R. A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab818b · Cited by 30
Agyare, B. O., Asare, J., Kraishan, A., Nkrumah, I., & Adjekum, D. K. (2025) · Computers and Education Artificial Intelligence · doi:10.1016/j.caeai.2025.100365 · Cited by 53
Photonic Nanomaterials for Wearable Health Solutions
Park, T., Leem, J. W., Kim, Y. L., & Lee, C. H. (2025) · Advanced Materials · doi:10.1002/adma.202418705 · Cited by 32
The marriage of biochemistry and nanotechnology for non-invasive real-time health monitoring
Ji, D., Guo, X., Fu, W., Ding, Z., Wang, C., Zhang, Q., Ramakrishna, S., & Qin, X. (2022) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2022.100681 · Cited by 28
Wen, N., Guan, X., Fan, Z., Guo, Y., Cong, T., Huang, H. Q., Li, C., Zhang, J., Lei, B., Yang, R., et al. (2022) · Organic Electronics · doi:10.1016/j.orgel.2022.106723 · Cited by 24
Micro‐ and Nanosystems for Advanced Transdermal Delivery
Yan, L., Alba, M., Tabassum, N. H., & Voelcker, N. H. (2019) · Advanced Therapeutics · doi:10.1002/adtp.201900141 · Cited by 24
Gao, Y., Elhadad, A., & Choi, S. (2024) · Small · doi:10.1002/smll.202408182 · Cited by 26
Nanogenerator-induced personalized wearable health monitoring electronics: A review
Shahat, A., Mahmoud, M. A., El‐Sewify, I. M., Reda, A., Akter, N., Alharbi, A., Radwan, A. G., Hasan, M., Shenashen, M. A., & El‐Safty, S. A. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110897 · Cited by 26
Kim, J., Yoon, H., Viswanath, S., & Dağdeviren, C. (2025) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-020524-121438 · Cited by 37
Applications of Carbon-Based Multivariable Chemical Sensors for Analyte Recognition
Shi, L., Song, J. J., Wang, Y., Fu, H., Patrick-Iwuanyanwu, K. C., Zhang, L., Lawrie, C. H., & Zhang, J. (2025) · Nano-Micro Letters · doi:10.1007/s40820-025-01741-0 · Cited by 26
“Alongside the increasing pursuit of healthy lifestyles, these sensors are expected to facilitate applications such as the detection of harmful substances and the early pre-diagnosis of diseases in home settings [10–12].”
Remote Follow-Up Technologies in Traumatic Brain Injury: A Scoping Review
Smith, B. G., Tumpa, S., Mantle, O., Whiffin, C. J., Mee, H., Solla, D. J. F., Paiva, W. S., Newcombe, V., Kolias, A. G., & Hutchinson, P. J. (2022) · Journal of Neurotrauma · doi:10.1089/neu.2022.0138 · Cited by 25
Munir, T., Akbar, M. S., Ahmed, S., Sarfraz, A., Sarfraz, Z., Sarfraz, M., Félix, M., & Chérrez-Ojeda, I. (2022) · Sensors · doi:10.3390/s22208051 · Cited by 39
Universal Flexible Wearable Biosensors for Noninvasive Health Monitoring
Chen, M., Zhang, J., Ji, G., Wang, H., Zhu, B., Chen, C., Zhou, H., Wang, Y., & Gao, Z. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c22623 · Cited by 28
Validation of Printed, Skin‐Mounted Multilead Electrode for ECG Measurements
Vuorinen, T., Noponen, K., Vehkaoja, A. T., Onnia, T., Laakso, E., Leppänen, S., Mansikkamäki, K., Seppänen, T., & Mäntysalo, M. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900246 · Cited by 23
Advances in nanomaterial-based biosensors: Innovations, challenges, and emerging applications
Rawat, S., Phogat, P., Shreya, & Chand, B. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.113334 · Cited by 24
Zhu, B., Ma, C., Qian, Z., Ren, L., & Yuan, H. (2022) · Polymers · doi:10.3390/polym14071294 · Cited by 24
Presti, D. L., Massaroni, C., Tocco, J. D., Schena, E., Formica, D., Caponero, M., Longo, U. G., Carnevale, A., D’Abbraccio, J., Massari, L., et al. (2019) · IEEE International Symposium on Medical Measurements and Applications (MeMeA) · doi:10.1109/memea.2019.8802157 · Cited by 22
“In the last decades, wearables are emerging as an important class of technologies able to extend traditional healthcare delivery systems and to empower patient self-care [1].”
BackgroundRecent advances in the study of tear biomarkers and contact lens-based biosensors
Bai, W., Yu, X., Li, Q., Tan, H., Ma, K., Bai, H., Li, S., Hu, J. H., Yao, Y., Zhuang, W., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156540 · Cited by 24
Castañeda, W. A. C., & Bertemes-Filho, P. (2024) · Sensors · doi:10.3390/s24247965 · Cited by 29
State of the Art Review of Wearable Devices for Respiratory Monitoring
Jia, Z., Huth, H. B., Teoh, W. Q., Xu, S. W., Wood, B. J., & Tse, Z. T. H. (2025) · IEEE Access · doi:10.1109/access.2025.3529437 · Cited by 23
“CDRs offer a uniquely rich application for wearable technology which can monitor the respiratory function of patients from home [25].”
Jeong, S., Son, M., Kang, Y., Yang, J., Lim, T., & Ju, S. (2021) · npj Flexible Electronics · doi:10.1038/s41528-021-00131-x · Cited by 25
“Rfiber ¼ ðRfixed ´ VfiberÞ=ð5 VfiberÞ (1) where Rfixed is the resistance (500 kΩ) connected in series to the individual fiber strands, and Vfiber is the voltage of the fiber extracted from the microcontroller.”
Stress Dissipation Encoded Silk Fibroin Electrode for the Athlete‐Beneficial Silk Bioelectronics
Choi, W., Heo, D., Kim, T., Jung, S., Choi, M., Heo, J., Kwon, J., Kim, B., Lee, W., Koh, W., et al. (2022) · Advanced Science · doi:10.1002/advs.202105420 · Cited by 28
Takahashi, S., Nakazawa, E., Ichinohe, S., Akabayashi, A., & Akabayashi, A. (2022) · Diagnostics · doi:10.3390/diagnostics12102563 · Cited by 31
“These are advantageous since the sensors are minimized and integrated into the network connectivity and predictive analytics to capture, transmit, and analyze biometric information automatically [9].”
BackgroundHigh-Sensitivity and Low-Cost Wearable Flexible Pressure Sensor Based on MOFs
Pan, W., Wang, Y., Ouyang, G., Ren, M., & Cao, M. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c00547 · Cited by 21
Alqurashi, T., & Butt, H. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b00155 · Cited by 21
“1,2 Considering the mechanical fl exibility in a photonic device, the technology has potentially enormous applications for optical imaging, 3 epidermal sensing, 4,5 light-emitting diodes (LEDs), 6,7 wearable strain sensors, 8,9 and bioinspired photonics.”
Self-citationCho, Y., Kim, H., Seong, S., Park, K., Choi, J., Kim, M., Kim, D., & Jeon, H. J. (2024) · Journal of Affective Disorders · doi:10.1016/j.jad.2024.06.031 · Cited by 23
Wearable Devices for Remote Monitoring of Chronic Diseases: Systematic Review
Tegegne, M. D., Kalhori, S. R. N., Haas, P., Sobotta, V. M. G., Warnecke, J. M., & Deserno, T. M. (2025) · JMIR mhealth and uhealth · doi:10.2196/74071 · Cited by 43
“Health care providers achieve this by remotely monitoring health parameters [8,9].”
Mayer, G., Alvarez, S., Gronewold, N., & Schultz, J.-H. (2020) · Journal of Medical Internet Research · doi:10.2196/20528 · Cited by 19
“In 2016, the worldwide market reached up to 125 million devices, with estimates suggesting 237 million in 2020 [27].”
BackgroundZhao, Y., Yi, G., Kang, W., et al. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.156191 · Cited by 19
Choi, D. H., Kim, H. T., Kim, Y., Park, K.-H., Kim, M. S., Lee, J. H., Kim, H. J., Chung, J. J., & Kim, H. J. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.156814 · Cited by 19
Dunaev, A. (2023) · Journal of Biomedical Photonics & Engineering · doi:10.18287/jbpe23.09.020201 · Cited by 20
Razek, A. (2023) · Electronics · doi:10.3390/electronics12234780 · Cited by 26
HabitSense: A Privacy-Aware, AI-Enhanced Multimodal Wearable Platform for mHealth Applications
Fernandes, G. J., Zheng, J., Pedram, M., Romano, C., Shahabi, F., Rothrock, B., Cohen, T., Zhu, H., Butani, T. S., Hester, J. D., et al. (2024) · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · doi:10.1145/3678591 · Cited by 29
Highly Conformal Polymers for Ambulatory Electrophysiological Sensing
Hu, M., Zhang, J. P., Liu, Y., Zheng, X., Li, X., Li, X., & Yang, H. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200047 · Cited by 20
Xu, J., Guo, X., Zhang, Z., Liu, H., & Lee, C. (2024) · Advanced Science · doi:10.1002/advs.202407888 · Cited by 21
Wearable biosensors and sample handling strategies
Parlak, O., Curto, V. F., Ojeda, E., Basabe‐Desmonts, L., Benito‐Lopez, F., & Salleo, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102407-2.00004-7 · Cited by 23
Yun, G., Youn, W., Lee, H., Han, S. Y., Oliveira, M. B., Cho, H., Caruso, F., Mano, J. F., & Choi, I. S. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02171 · Cited by 18
Stratified Multivariate Multiscale Dispersion Entropy for Physiological Signal Analysis
Kafantaris, E., Lo, T.-Y. M., & Escudero, J. (2022) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2022.3207582 · Cited by 20
“INCREASED amounts of physiological data are becoming available due to the advances in physiological recording technology across a range of applications from wearable devices to clinical environments [1], [2], [3].”
BackgroundPanagiotou, M., Zlatintsi, A., Filntisis, P. P., Roumeliotis, A. J., Efthymiou, N., & Maragos, P. A. (2022) · European Signal Processing Conference (EUSIPCO) · doi:10.23919/eusipco55093.2022.9909697 · Cited by 26
“Many works have also focused in identifying behavioral and biometric markers, which can be extracted from such data and provide insights into general medicine [7].”
BackgroundConsumer Wearable Sleep Trackers
Chiang, A. A.-P., & Khosla, S. (2023) · Sleep Medicine Clinics · doi:10.1016/j.jsmc.2023.05.005 · Cited by 21
Wearable real-time multi-health parameter monitoring system
Qin, W., Xue, Y., Peng, H. Y., Li, G., Chen, W., Zhao, X., Pang, J., & Zhou, B. (2023) · International Journal of Clothing Science and Technology · doi:10.1108/ijcst-04-2023-0054 · Cited by 18
Design and application of flexible wearable sensors based on optical fibers
Hou, Z., Liu, J., Liao, Y., Gong, J., Li, C., Li, M., Liu, H., & Huang, Q. (2025) · Talanta · doi:10.1016/j.talanta.2025.128576 · Cited by 22
Off-Person ECG Biometrics Using Spatial Representations and Convolutional Neural Networks
Ciocoiu, I. B., & Cleju, N. (2020) · IEEE Access · doi:10.1109/access.2020.3042547 · Cited by 22
“Moreover, solutions relying on more convenient off-person acquisition setups (e.g., ECG signals acquired in a less intrusive manner on hand, fingers, or ears, without requiring special preparation of the subject’s skin) may prove particularly attractive for mobile/wearable settings [2], [3].”
BackgroundXu, Q., Pan, Y., Li, W., & Yang, Z. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88431-0.00007-7 · Cited by 19
Composite Hydrogel Modified with Gelatin-Imidazole: A Conductive and Adhesive Hydrogel
Zhang, Y.-S., Liu, X., Chu, Y.-Z., Chen, P., Yeh, Y., Ni, Y.-F., & Yeh, M. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c01075 · Cited by 19
Liao, Y., Xue, C., & Zhang, H. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.110262 · Cited by 18
Collecting, exploring and sharing personal data: Why, how and where
Estrada-Galiñanes, V., & Wac, K. (2019) · Data Science · doi:10.3233/ds-190025 · Cited by 21
“R Nevertheless, there are research and development efforts that help the incorporation of wearables as medical technologies [40].”
BackgroundWearable Sensors and Motion Analysis for Neurological Patient Support
Dabnichki, P., & Pang, T. Y. (2024) · Biosensors · doi:10.3390/bios14120628 · Cited by 19
Lenar, N., & Paczosa‐Bator, B. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26115001 · Cited by 22
“Similarly, electrochemical LOC devices may rely on benchtop po-tentiostats, although recent advancements are addressing this gap through on-chip signal amplification and the use of wireless modules and integrated microcontrollers [81,82].”
Baluta, S., Suresh, V., Chmielowska, M., Smeesters, L., & Cabaj, J. (2026) · ACS Omega · doi:10.1021/acsomega.5c06072 · Cited by 23
“…current research field of artificial intelligence in healthcare, spanning issues from the application of medical sensors with artificial intelligence in decision-making 23,24 to wearable sensors for healthcare delivery 25,26 and the use of artificial intelligence in the Internet of Medical Things.”
Toward a Systematic Survey on Wearable Computing for Education Applications
Gao, W. G., Wei, T., Huang, H., Chen, X., & Li, Q. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3168324 · Cited by 20
Razek, A. (2023) · Standards · doi:10.3390/standards3020018 · Cited by 18
Overview of Wearable Healthcare Devices for Clinical Decision Support in the Prehospital Setting
Gathright, R., Mejia, I., Gonzalez, J. M., Torres, S. I. H., Berard, D., & Snider, E. J. (2024) · Sensors · doi:10.3390/s24248204 · Cited by 18
Flexible Complementary Metal‐Oxide‐Semiconductor Inverter Based on 2D p‐type WSe 2 and n‐type MoS 2
Piacentini, A., Polyushkin, D. K., Uzlu, B., Grundmann, A., Heuken, M., Kalisch, H., Vescan, A., Wang, Z., Lemme, M. C., Mueller, T., et al. (2024) · physica status solidi (a) · doi:10.1002/pssa.202300913 · Cited by 18
Sensorimotor rhythm neurofeedback training relieves anxiety in healthy people
Liu, S., Hao, X., Liu, X., He, Y., Zhang, L., An, X., Song, X., & Ming, D. (2021) · Cognitive Neurodynamics · doi:10.1007/s11571-021-09732-8 · Cited by 21
“(Piwek et al. 2016; Schueller et al. 2017; Weerdmeester et al. 2019; Yetisen et al. 2018).”
Razek, A. (2023) · Applied Sciences · doi:10.3390/app13031265 · Cited by 18
Contextualizing remote fall risk: Video data capture and implementing ethical AI
Moore, J., McMeekin, P. J., Parkes, T., Walker, R. W., Morris, R., Stuart, S., Hetherington, V., & Godfrey, A. (2024) · npj Digital Medicine · doi:10.1038/s41746-024-01050-7 · Cited by 17
“The rationale for using wearables as objective tools to capture habitual 24 .”
BackgroundApplication of advanced biosensors in nervous system diseases
Meng, Z., Zhang, Y., Lu, Y., Yuan, F., Wang, J., Chen, J., Liu, J., Wang, G., & Zang, G. (2024) · Interdisciplinary medicine · doi:10.1002/inmd.20240024 · Cited by 18
Metal‐Organic Framework‐Based Tribovoltaic Textile for Human Body Signal Monitoring
Li, Y., Wu, Y., Shokurov, A. V., & Menon, C. (2025) · Advanced Science · doi:10.1002/advs.202414086 · Cited by 16
Zhang, K., Zheng, L., Farha, F. I., Wang, L., & Xu, F. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.0c00200 · Cited by 14
Surface Immobilized Nucleic Acid–Transcription Factor Quantum Dots for Biosensing
Chen, M., Nguyen, T. T., Varongchayakul, N., Grazon, C., Chern, M., Baer, R. C., Lecommandoux, S., Klapperich, C. M., Galagan, J. E., Dennis, A. M., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000403 · Cited by 16
Wearable Technology in Healthcare
Krey, M., Schlatter, U., Mahadevan, D. A., Derungs, K., & Oehler, J. K. (2020) · Journal of Advances in Information Technology · doi:10.12720/jait.11.3.172-180 · Cited by 16
“If the heart rhythm is deviates, the user will be contacted immediately [24].”
BackgroundXu, X., Xie, S., Zhang, Y., & Peng, H. (2019) · Angewandte Chemie · doi:10.1002/ange.201902425 · Cited by 16
A Wearable Enzymatic Uric Acid Sensor on Microfluidics-on-Fabrics with Octadecane (C18) Modification
Zhang, T., Terrell, J. A., Chen, H., & Chen, C. (2025) · ACS Sensors · doi:10.1021/acssensors.5c00832 · Cited by 15
Advances in stimuli-responsive polymers for biomedical and environmental applications
Kang, T. W., Park, K., & Kim, M. S. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101140 · Cited by 18
An Edge Computing and Ambient Data Capture System for Clinical and Home Environments
Suresha, P. B., Hegde, C., Jiang, Z., & Clifford, G. D. (2022) · Sensors · doi:10.3390/s22072511 · Cited by 16
“Since the turn of the 21st century, wearables (on-body sensors) have been at the fore-front of non-traditional health monitoring systems [29–31].”
BackgroundEmerging trends in drug-device combination for advanced disease diagnosis and therapy
Liu, Z., Shi, Y., & Liu, C. (2023) · Nano Today · doi:10.1016/j.nantod.2023.101853 · Cited by 15
Khushhal, A. A., Abdelaal, A. A. M., & Elsayed, M. (2024) · Journal of Multidisciplinary Healthcare · doi:10.2147/jmdh.s449071 · Cited by 14
“37 The continuous growth of the wearable devices market is due to rapid development and adaptation as well as low product costs compared to hospital devices such as the ECG. 37 The HR is tightly and linearly correlated with the oxygen consumption at a specified time point.”
BackgroundLiao, Z., Golparvar, A. J., Bathaei, M. J., Cardoso, F. A., & Boutry, C. M. (2025) · Advanced Science · doi:10.1002/advs.202509934 · Cited by 20
Żyliński, M., Nassibi, A., & Mandic, D. P. (2023) · Sensors · doi:10.3390/s23177521 · Cited by 18
“To this end, processing and analysis of a given continuous stream of real-time physiological data generated by wearables needs to be increasingly performed within wearable devices [3].”
BackgroundRemote consultation based on mixed reality technology
Zhang, J., Gao, F., & Ye, Z. (2020) · Global Health Journal · doi:10.1016/j.glohj.2020.01.001 · Cited by 13
Understanding resistance increase in composite inks under monotonic and cyclic stretching
Li, Q., Antoniou, A. M., & Pierron, O. N. (2022) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aca98a · Cited by 13
“In wearable devices, this loading results in strains of up to 30%–50% [20, 21].”
Intensity enhancement of ferromagnetic resonance modes in exchange coupled magnetic multilayers
Franco, A. F. (2019) · New Journal of Physics · doi:10.1088/1367-2630/ab65da · Cited by 13
Medication management initiatives using wearable devices: scoping review
Iino, H., Kizaki, H., Imai, S., & Hori, S. (2024) · JMIR Human Factors · doi:10.2196/57652 · Cited by 12
“WDs are currently equipped with various types of sensors [9-12].”
Pan, M., Wu, K., Zhao, J., Hou, X., Chen, P., & Wang, B. (2023) · International Journal of Nursing Knowledge · doi:10.1111/2047-3095.12418 · Cited by 12
“Limb-worn devices include various wearable clothing (Yetisen et al., 2018) and electronic skin devices, which simulate human skin functions and have excellent properties such as super-hydrophilicity and biocompatibility.”
Wearables, E-textiles, and Soft Robotics for Personalized Medicine
Martínez, R. V. (2023) · Springer handbooks · doi:10.1007/978-3-030-96729-1_59 · Cited by 15
Boland, C. S. (2024) · Nanotechnology · doi:10.1088/1361-6528/ad272f · Cited by 17
“Y 300 kPa ) [ 12, 222, 223 ] .”
WEARABLE TECHNOLOGY: HOW HEALTHCARE IS CHANGING FOREVER
Charan, G. S., Khurana, M. S., & Kalia, R. (2023) · Journal of Chitwan Medical College · doi:10.54530/jcmc.1376 · Cited by 14
Ma, C., Li, X., Mao, N., Wang, M., Cui, C., Jia, H., Liu, X., & Sun, Q. (2024) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2024.116427 · Cited by 16
Singh, O. P., El-Badawy, I. M., Sornambikai, S., & O’Mahony, C. (2025) · Biomedical Microdevices · doi:10.1007/s10544-024-00732-z · Cited by 13
“…monitoring is particularly essential for managing chronic conditions, as biosignal data can track disease progression, evaluate treatment efficacy, and enable personalized healthcare interventions (Plonsey and Barr 2007; Thakor 2017; Choi et al. 2021; Yetisen et al. 2018; Goldberger et al. 2008).”
Multi-Device Nutrition Control
Cunha, C. A. D. S., & Duarte, R. P. (2022) · Sensors · doi:10.3390/s22072617 · Cited by 15
“Wearables are devices with high potential in healthcare [9], since they could automate the process of food intake logging.”
BackgroundChander, B., & Kumaravelan (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819664-9.00009-0 · Cited by 16
Guillén‐Gámez, F. D., & Mayorga-Fernández, M. J. (2019) · Mobile Information Systems · doi:10.1155/2019/4731048 · Cited by 16
“[13] state, medical data can be sent to a healthcare provider to receive therapeutic feedback or can act automatically by other devices in the network.”
BackgroundTwomey, R., Culos-Reed, S. N., Daun, J. T., Ferber, R., & Dort, J. C. (2020) · International Journal of Surgery · doi:10.1016/j.ijsu.2020.10.032 · Cited by 13
Socioeconomic Class in Physical Activity Wearables Research and Design
Kouaho, W.-J., & Epstein, D. A. (2024) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3613904.3642789 · Cited by 19
“The possibilities for the next generation of mass scale medical technology could be with tracking devices [138] but without sincere contemplation now, we will be forced to reform later.”
BackgroundCzerwiński, A., Słojewska, M., Jurczak, J., et al. (2024) · Molecules · doi:10.3390/molecules29194526 · Cited by 11
“This customization is crucial since the design of modern devices is highly valued [9–11].”
BackgroundBobrova, P., Perego, P., & Boiano, R. (2024) · Sensors · doi:10.3390/s24206582 · Cited by 13
“Advances in miniaturization, flexible electronics, and biosensors have significantly improved the functionality and reliability of wearable devices [38,39].”
Background
Metadata
- Authors
- Yetisen, A. K., Martinez‐Hurtado, J. L., Ünal, B., Khademhosseini, A., & Butt, H.
- Affiliations
- Technical University of Munich (DE)
- TUM Incubator Technische Universität München Lichtenberg Str. 6 Garching b. München D‐85748 Germany
- Triton Systems (United States) (US)
- University of California, Los Angeles (US)
- University of Birmingham (GB)
- Corresponding author
- Yetisen, Ali K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-06-11
- Volume
- 30
- Issue
- 33
- Pages
- e1706910-e1706910
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- PMC
- PMC6541866
- OpenAlex
- W2808514730
- Cited by
- 569
- References
- 256
- Citations by year
- 2026: 51 · 2025: 81 · 2024: 77 · 2023: 69 · 2022: 80 · 2021: 80 · 2020: 66 · 2019: 56 · 2018: 9
- FWCI
- 21.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- University of Birmingham Research Portal (University of Birmingham) (submittedVersion, cc-by)
- mediaTUM – the media and publications repository of the Technical University Munich (Technical University Munich) (submittedVersion, other-oa)
- Spiral (Imperial College London) (submittedVersion, cc-by)
- Funders
- Alexander von Humboldt-Stiftung
- Carl Friedrich von Siemens Stiftung
- Wellcome Trust
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Engineering › Biomedical Engineering › Non-Invasive Vital Sign Monitoring
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Keywords
- wearable devices, flexible electronics, electrochemical biosensor, microfluidics, Internet of Things, physiological monitoring, vital signs, stimuli-responsive drug delivery, energy management, data security, clinical trials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.