The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
Open accessAbstract
Despite advances in the bioprinting technology, biofabrication of circumferentially multilayered tubular tissues or organs with cellular heterogeneity, such as blood vessels, trachea, intestine, colon, ureter, and urethra, remains a challenge. Herein, a promising multichannel coaxial extrusion system (MCCES) for microfluidic bioprinting of circumferentially multilayered tubular tissues in a single step, using customized bioinks constituting gelatin methacryloyl, alginate, and eight‐arm poly(ethylene glycol) acrylate with a tripentaerythritol core, is presented. These perfusable cannular constructs can be continuously tuned up from monolayer to triple layers at regular intervals across the length of a bioprinted tube. Using customized bioink and MCCES, bioprinting of several tubular tissue constructs using relevant cell types with adequate biofunctionality including cell viability, proliferation, and differentiation is demonstrated. Specifically, cannular urothelial tissue constructs are bioprinted, using human urothelial cells and human bladder smooth muscle cells, as well as vascular tissue constructs, using human umbilical vein endothelial cells and human smooth muscle cells. These bioprinted cannular tissues can be actively perfused with fluids and nutrients to promote growth and proliferation of the embedded cell types. The fabrication of such tunable and perfusable circumferentially multilayered tissues represents a fundamental step toward creating human cannular tissues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Self-citationA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
The cell-cell adhesion molecule E-cadherin
van Roy, F., & Berx, G. (2008) · Cellular and Molecular Life Sciences · doi:10.1007/s00018-008-8281-1 · Cited by 1,325
Endothelial-pericyte interactions in angiogenesis
Gerhardt, H., & Betsholtz, C. (2003) · Cell and Tissue Research · doi:10.1007/s00441-003-0745-x · Cited by 1,057
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Self-citationDirect 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Self-citationMicrofluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Self-citationGelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
A decade of progress in tissue engineering
Khademhosseini, A., & Langer, R. (2016) · Nature Protocols · doi:10.1038/nprot.2016.123 · Cited by 747
Self-citation3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Self-citationBioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
Self-citationA novel endothelial-specific membrane protein is a marker of cell-cell contacts.
Lampugnani, M. G., Resnati, M., Raiteri, M., Pigott, R., Pisacane, A., Houen, G., Ruco, L. P., & Dejana, E. (1992) · The Journal of cell biology · doi:10.1083/jcb.118.6.1511 · Cited by 632
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Tissue-engineered autologous urethras for patients who need reconstruction: an observational study
Raya-Rivera, A., Esquiliano, D. R., Yoo, J. J., Lopez-Bayghen, E., Soker, S., & Atala, A. (2011) · The Lancet · doi:10.1016/s0140-6736(10)62354-9 · Cited by 474
von Willebrand factor biosynthesis, secretion, and clearance: connecting the far ends
Lenting, P. J., Christophe, O. D., & Denis, C. V. (2015) · Blood · doi:10.1182/blood-2014-06-528406 · Cited by 439
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Interplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
Self-citationFreeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Self-citationMehrali, M., Thakur, A., Pennisi, C. P., Talebian, S., Arpanaei, A., Nikkhah, M., & Dolatshahi‐Pirouz, A. (2017) · Advanced Materials · doi:10.1002/adma.201603612 · Cited by 345
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Yu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 267
Self-citationBioprinting the Cancer Microenvironment
Zhang, Y. S., Duchamp, M., Oklu, R., Ellisen, L. W., Langer, R., & Khademhosseini, A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00246 · Cited by 248
Self-citationBioprinted thrombosis-on-a-chip
Zhang, Y. S., Davoudi, F., Walch, P., Manbachi, A., Luo, X., Dell'Erba, V., Miri, A. K., Albadawi, H., Arneri, A., Li, X., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00380j · Cited by 227
Self-citationLi, Y., Liu, F., & Sun, J. (2009) · Chemical Communications · doi:10.1039/b900804g · Cited by 211
Development of hydrogels for regenerative engineering
Guan, X., Avci‐Adali, M., Alarçin, E., Cheng, H., Kashaf, S. S., Li, Y., Chawla, A., Jang, H. L., & Khademhosseini, A. (2017) · Biotechnology Journal · doi:10.1002/biot.201600394 · Cited by 199
Self-citationCui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Self-citationFormation of microvascular networks in vitro
Morgan, J. P., Delnero, P. F., Zheng, Y., Verbridge, S. S., Chen, J., Craven, M., Choi, N. W., Diaz-Santana, A., Kermani, P., Hempstead, B., et al. (2013) · Nature Protocols · doi:10.1038/nprot.2013.110 · Cited by 181
Wang, C., Cen, L., Yin, S., Liu, Q., Liu, W., Cao, Y., & Cui, L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.086 · Cited by 172
Trends in Tissue Engineering for Blood Vessels
Nemeno-Guanzon, J. G., Lee, S., Berg, J. R., Jo, Y. H., Yeo, J. E., Nam, B. M., Koh, Y.-G., & Lee, J. I. (2012) · Journal of Biomedicine and Biotechnology · doi:10.1155/2012/956345 · Cited by 158
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
In vitroevaluation of carbon-nanotube-reinforced bioprintable vascular conduits
Dolati, F., Yu, Y., Zhang, Y., Jesús, A. M. D., Sander, E. A., & Ozbolat, I. T. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/14/145101 · Cited by 154
Self-citationDubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Ilan, N., Cheung, L., Pinter, E., & Madri, J. A. (2000) · Journal of Biological Chemistry · doi:10.1074/jbc.m001857200 · Cited by 149
Hydrogel Templates for Rapid Manufacturing of Bioactive Fibers and 3D Constructs
Tamayol, A., Najafabadi, A. H., Aliakbarian, B., Arab‐Tehrany, E., Akbari, M., Annabi, N., Juncker, D., & Khademhosseini, A. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500492 · Cited by 147
Self-citationTissue Engineering of Urinary Bladder and Urethra: Advances from Bench to Patients
Orabi, H., Bouhout, S., Morissette, A., Rousseau, A., Chabaud, S., & Bolduc, S. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/154564 · Cited by 112
Blaeser, A., Campos, D. F. D., Weber, M. H., Neuß, S., Theek, B., Fischer, H., & Jahnen‐Dechent, W. (2013) · BioResearch open access · doi:10.1089/biores.2013.0031 · Cited by 95
The tissue engineering of blood vessels and the heart
Nerem, R. M., & Ensley, A. E. (2004) · American Journal of Transplantation · doi:10.1111/j.1600-6135.2004.0343.x · Cited by 67
Kawasaki, Y., Imaizumi, T., Matsuura, H., Ohara, S., Takano, K., Suyama, K., Hashimoto, K., Nozawa, R., Suzuki, H., & Hosoya, M. (2008) · Pediatric Nephrology · doi:10.1007/s00467-008-0749-6 · Cited by 44
Characterization of tight junction proteins in cultured human urothelial cells
Rickard, A., Dorokhov, N., Ryerse, J. S., Klumpp, D. J., & McHowat, J. (2008) · In Vitro Cellular & Developmental Biology - Animal · doi:10.1007/s11626-008-9116-y · Cited by 41
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citationDevelopment of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Metadata
- Authors
- Pi, Q., Maharjan, S., Yan, X., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldivar, R., Hu, N., Jia, W., Xu, C., Kang, J., Hassan, S., Cheng, H., Hou, X., Khademhosseini, A., & Zhang, Y. S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-08-23
- Volume
- 30
- Issue
- 43
- Pages
- e1706913-e1706913
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2888229416
- Cited by
- 305
- References
- 43
- FWCI
- 13.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.