The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
Anode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
Abstract
Lithium–sulfur (Li–S) batteries are considered as one of the most promising options to realize rechargeable batteries with high energy capacity. Previously, research has mainly focused on solving the polysulfides' shuttle, cathode volume changes, and sulfur conductivity problems. However, the instability of anodes in Li–S batteries has become a bottleneck to achieving high performance. Herein, the main efforts to develop highly stable anodes for Li–S batteries, mainly including lithium metal anodes, carbon‐based anodes, and alloy‐based anodes, are considered. Based on these anodes, their interfacial engineering and structure design are identified as the two most important directions to achieve ideal anodes. Because of high reactivity and large volume change during cycling, Li anodes suffer from severe side reactions and structure collapse. The solid electrolyte interphase formed in situ by modified electrolytes and ex situ artificial coating layers can enhance the interfacial stability of anodes. Replacing common Li foil with rationally designed anodes not only suppresses the formation of dendritic Li but also delays the failure of Li anodes. Manipulating the anode interface engineering and rationally designing anode architecture represents an attractive path to develop high‐performance Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Silicon based lithium-ion battery anodes: A chronicle perspective review
Zuo, X., Zhu, J., Müller-Buschbaum, P., & Cheng, Y.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.013 · Cited by 1,478
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical Applications
Feng, K., Li, M., Liu, W., Kashkooli, A. G., Xiao, X., Cai, M., & Chen, Z. (2018) · Small · doi:10.1002/smll.201702737 · Cited by 1,042
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Self-citationAshuri, M., He, Q., & Shaw, L. L. (2015) · Nanoscale · doi:10.1039/c5nr05116a · Cited by 781
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries
Liu, N., Hu, L., McDowell, M. T., Jackson, A., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn2017167 · Cited by 578
Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries
Li, Y., Chen, X., Dolocan, A., Cui, Z., Xin, S., Xue, L., Xu, H., Park, K., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03106 · Cited by 556
Self-citationImplantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Self-citationImproved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Self-citationLin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Ying, H., & Han, W. (2017) · Advanced Science · doi:10.1002/advs.201700298 · Cited by 436
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Roles of nanosize in lithium reactive nanomaterials for lithium ion batteries
Lee, K. T., & Cho, J. (2010) · Nano Today · doi:10.1016/j.nantod.2010.11.002 · Cited by 415
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Surface Chemistry and Electrical Properties of Germanium Nanowires
Wang, D., Chang, Y.-L., Wang, Q., Cao, J., Farmer, D. B., Gordon, R. G., & Dai, H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja047435x · Cited by 363
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
Ming, J., Cao, Z., Wahyudi, W., Li, M., Kumar, P., Wu, Y., Hwang, J.-Y., Hedhili, M. N., Cavallo, L., Sun, Y.-K., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01177 · Cited by 353
Self-citationWu, F., Lee, J. T., Nitta, N., Kim, H., Borodin, O., & Yushin, G. (2015) · Advanced Materials · doi:10.1002/adma.201404194 · Cited by 352
Self-citationManipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Li, G., Gao, Y., He, X., Huang, Q., Chen, S., Kim, S. H., & Wang, D. (2017) · Nature Communications · doi:10.1038/s41467-017-00974-x · Cited by 314
Lin, D., Zhao, J., Sun, J., Yao, H., Liu, Y., Yan, K., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1619489114 · Cited by 299
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Lin, Y.-X., Liu, Z., Leung, K., Chen, L.-Q., Lu, P., & Qi, Y. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.078 · Cited by 287
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Ionic liquid-enhanced solid state electrolyte interface (SEI) for lithium–sulfur batteries
Zheng, J., Gu, M., Chen, H., Meduri, P., Engelhard, M. H., Zhang, J.-G., Liu, J., & Xiao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11553d · Cited by 255
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Nanosilicon anodes for high performance rechargeable batteries
Xu, Z.-L., Liu, X., Luo, Y., Zhou, L., & Kim, J.-K. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.003 · Cited by 252
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Weng, W., Pol, V. G., & Amine, K. (2013) · Advanced Materials · doi:10.1002/adma.201204051 · Cited by 241
Zhao, Q., Tu, Z., Wei, S., Zhang, K., Choudhury, S., Liu, X., & Archer, L. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711598 · Cited by 241
Low‐Cost Metallic Anode Materials for High Performance Rechargeable Batteries
Wang, M., Zhang, F., Lee, C., & Tang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700536 · Cited by 240
A new finding on the role of LiNO3 in lithium-sulfur battery
Zhang, S. S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.009 · Cited by 239
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
Protected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
In Situ Chemical Imaging of Solid-Electrolyte Interphase Layer Evolution in Li–S Batteries
Nandasiri, M. I., Camacho-Forero, L. E., Schwarz, A. M., Shutthanandan, V., Thevuthasan, S., Balbuena, P. B., Mueller, K. T., & Murugesan, V. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00374 · Cited by 218
Yamada, T., Ito, S., Omoda, R., Watanabe, T., Aihara, Y., Agostini, M., Ulissi, U., Hassoun, J., & Scrosati, B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0441504jes · Cited by 217
Jin, S., Xin, S., Wang, L., Du, Z., Cao, L., Chen, J., Kong, X., Gong, M., Lu, J., Zhu, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602704 · Cited by 216
Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
Liu, D., Liu, Z. J., Li, X., Xie, W., Wang, Q., Liu, Q., Fu, Y., & He, D. (2017) · Small · doi:10.1002/smll.201702000 · Cited by 215
Lithium Silicide Surface Enrichment: A Solution to Lithium Metal Battery
Tang, W., Yin, X., Kang, S., Chen, Z., Tian, B., Teo, S. L., Wang, X., Chi, X., Loh, K. P., Lee, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201801745 · Cited by 213
Fabrication of Hybrid Silicate Coatings by a Simple Vapor Deposition Method for Lithium Metal Anodes
Liu, F., Xiao, Q., Wu, H. B., Shen, L., Xu, D., Cai, M., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701744 · Cited by 206
Ye, H., Yin, Y.-X., Zhang, S.-F., Shi, Y., Liu, L., Zeng, X.-X., Wen, R., Guo, Y.-G., & Wan, L.-J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.056 · Cited by 205
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Kim, J.-S., Kim, D. W., Jung, H. T., & Choi, J. W. (2015) · Chemistry of Materials · doi:10.1021/cm503447u · Cited by 199
Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Yue, X.-Y., Wang, W.-W., Wang, Q.-C., Meng, J.-K., Zhang, Z.-Q., Wu, X.-J., Yang, X.-Q., & Zhou, Y.-N. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.017 · Cited by 188
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Yu, M., Wang, Z., Wang, Y., Dong, Y., & Qiu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700018 · Cited by 180
Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium–Sulfur Batteries
Li, G., Huang, Q., He, X., Gao, Y., Wang, D., Kim, S. H., & Wang, D. (2018) · ACS Nano · doi:10.1021/acsnano.7b08035 · Cited by 178
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Zheng, J., Fan, X., Ji, G., Wang, H., Hou, S., DeMella, K. C., Raghavan, S. R., Wang, J., Xu, K., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.065 · Cited by 177
Gordin, M. L., Dai, F., Chen, S., Xu, T., Song, J., Tang, D., Azimi, N., Zhang, Z., & Wang, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501665s · Cited by 176
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Reactivity at the Lithium–Metal Anode Surface of Lithium–Sulfur Batteries
Camacho-Forero, L. E., Smith, T. W., Bertolini, S., & Balbuena, P. B. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b08254 · Cited by 166
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Sulfiphilic Nickel Phosphosulfide Enabled Li2S Impregnation in 3D Graphene Cages for Li–S Batteries
Zhou, G., Sun, J., Jin, Y., Chen, W., Zu, C., Zhang, R., Qiu, Y., Zhao, J., Zhuo, D., Liu, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603366 · Cited by 160
Rationally Designed Silicon Nanostructures as Anode Material for Lithium‐Ion Batteries
Shen, T., Yao, Z., Xia, X., Wang, X., Gu, C., & Tu, J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700591 · Cited by 160
Hassoun, J., Kim, J., Lee, D.-J., Jung, H.-G., Lee, S.-M., Sun, Y.-K., & Scrosati, B. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.060 · Cited by 159
Zhang, C., Lin, Y., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01037c · Cited by 159
Enhanced Performance of a Lithium–Sulfur Battery Using a Carbonate‐Based Electrolyte
Xu, Z., Wang, J., Yang, J., Miao, X., Chen, R., Qian, J., & Miao, R. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605931 · Cited by 159
Self-citationInsight into lithium–metal anodes in lithium–sulfur batteries with a fluorinated ether electrolyte
Zu, C., Azimi, N., Zhang, Z., & Manthiram, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03195h · Cited by 150
Jia, W., Fan, C., Wang, L., Wang, Q., Zhao, M., Zhou, A., & Li, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03897 · Cited by 150
Effect of the Anion Activity on the Stability of Li Metal Anodes in Lithium‐Sulfur Batteries
Cao, R., Chen, J., Han, K. S., Xu, W., Mei, D., Bhattacharya, P., Engelhard, M., Mueller, K. T., Liu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505074 · Cited by 149
Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery
Hassoun, J., Sun, Y., & Scrosati, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.093 · Cited by 148
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04172k · Cited by 139
Agostini, M., Hassoun, J., Liu, J., Jeong, M., Nara, H., Momma, T., Ōsaka, T., Sun, Y., & Scrosati, B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4057166 · Cited by 137
Understanding the Effect of a Fluorinated Ether on the Performance of Lithium–Sulfur Batteries
Azimi, N., Xue, Z., Bloom, I., Gordin, M. L., Wang, D., Daniel, T. B., Takoudis, C. G., & Zhang, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01412 · Cited by 135
Atomic Layer Deposition of LixAlyS Solid‐State Electrolytes for Stabilizing Lithium‐Metal Anodes
Cao, Y., Meng, X., & Elam, J. W. (2016) · ChemElectroChem · doi:10.1002/celc.201600139 · Cited by 128
Polysulfide-containing Glyme-based Electrolytes for Lithium Sulfur Battery
Agostini, M., Xiong, S., Matic, A., & Hassoun, J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00896 · Cited by 126
From Commercial Sponge Toward 3D Graphene–Silicon Networks for Superior Lithium Storage
Li, B., Yang, S., Li, S., Wang, B., & Liu, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500289 · Cited by 126
A review of atomic layer deposition providing high performance lithium sulfur batteries
Yan, B., Li, X., Bai, Z., Song, X., Xiong, D., Zhao, M., Li, D., & Lu, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.097 · Cited by 126
New Insights into Mossy Li Induced Anode Degradation and Its Formation Mechanism in Li–S Batteries
Zhang, Y., Heim, F. M., Song, N., Bartlett, J. L., & Li, X. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00886 · Cited by 121
Barghamadi, M., Best, A. S., Bhatt, A. I., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.150 · Cited by 110
Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst
Ding, N., Zhou, L., Zhou, C., Geng, D., Jin, Y., Chien, S. W., Liu, Z., Ng, M., Yu, A., Hor, T. S. A., et al. (2016) · Scientific Reports · doi:10.1038/srep33154 · Cited by 109
High‐performance anode materials for Na‐ion batteries
Cheng, D., Yang, L., & Zhu, M. H. (2018) · Rare Metals · doi:10.1007/s12598-018-1015-0 · Cited by 102
Elucidating electrolyte decomposition under electron-rich environments at the lithium-metal anode
Camacho-Forero, L. E., & Balbuena, P. B. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp06485c · Cited by 99
Azimi, N., Xue, Z., Rago, N. L. D., Takoudis, C. G., Gordin, M. L., Song, J., Wang, D., & Zhang, Z. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0431501jes · Cited by 96
An efficient Li2S-based lithium-ion sulfur battery realized by a bifunctional electrolyte additive
Liu, M., Ren, Y., Jiang, H., Luo, C., Kang, F., & Zhao, T. S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.017 · Cited by 94
Luo, J. L., Lee, R., Jin, J.-T., Weng, Y., Fang, C., & Wu, N. (2016) · Chemical Communications · doi:10.1039/c6cc09248a · Cited by 92
Thieme, S., Brückner, J., Meier, A., Bauer, I., Gruber, K., Kaspar, J., Helmer, A., Althues, H., Schmuck, M., & Kaskel, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06748g · Cited by 88
Kim, J. Y., Kim, A., Liu, G., Woo, J.-Y., Kim, H., & Lee, J. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18997 · Cited by 87
Breaking Down the Crystallinity: The Path for Advanced Lithium Batteries
Zu, C., Dolocan, A., Xiao, P., Stauffer, S. K., Henkelman, G., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501933 · Cited by 84
Shen, C., Ge, M., Zhang, A., Fang, X., Liu, Y., Rong, J., & Zhou, C. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.013 · Cited by 76
Electromechanical Probing of Li/Li2CO3Core/Shell Particles in a TEM
Xiang, B., Wang, L., Liu, G., & Minor, A. M. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.018303jes · Cited by 74
A lithium-ion sulfur battery using a polymer, polysulfide-added membrane
Agostini, M., & Hassoun, J. (2015) · Scientific Reports · doi:10.1038/srep07591 · Cited by 58
Improvement in lithium cycling efficiency by using lithium powder anode
Kim, J. S., & Yoon, W. Y. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.12.071 · Cited by 56
Designing Realizable and Scalable Techniques for Practical Lithium Sulfur Batteries: A Perspective
Ye, Y., Wu, F., Xu, S., et al. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b03165 · Cited by 56
Self-citationSun, C., Huang, X., Jin, J. H., Lu, Y., Wang, Q., Yang, J., & Wen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.063 · Cited by 55
Hierarchical columnar silicon anode structures for high energy density lithium sulfur batteries
Piwko, M., Kuntze, T. H., Winkler, S., Straach, S., Härtel, P., Althues, H., & Kaskel, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.080 · Cited by 52
An, Y., Zhang, Z., Fei, H., Xu, X., Xiong, S. L., Feng, J., & Ci, L. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.101 · Cited by 50
Li, Q., Yang, H., Naveed, A., Guo, C., Yang, J., NuLi, Y., & Wang, J. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.02.004 · Cited by 48
Polysulfide rejection layer from alpha-lipoic acid for high performance lithium–sulfur battery
Song, J., Noh, H., Lee, H., Lee, J.-N., Lee, D. J., Lee, Y., Kim, C., Lee, Y. M., Park, J.-K., & Kim, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03625e · Cited by 45
Zhou, D., Liu, M., Yun, Q., Wang, X., He, Y., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Small · doi:10.1002/smll.201602015 · Cited by 40
Lin, S., Yang, Y., Cai, Z., Liu, L., & Hu, X. (2018) · Small · doi:10.1002/smll.201800616 · Cited by 30
Enabling electrolyte compositions for columnar silicon anodes in high energy secondary batteries
Piwko, M., Thieme, S., Weller, C., Althues, H., & Kaskel, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.046 · Cited by 27
Mohan, E. H., Sarada, B. V., Naidu, R. V. R., Salian, G. D., Haridas, A. K., Rao, B. V. A., & Rao, T. N. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.042 · Cited by 22
Effect of polypyrrole coating on Li powder anode for lithium-sulfur secondary batteries
Oh, S. J., & Yoon, W. Y. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0490-y · Cited by 10
Cited by
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries
Yan, C., Xu, R., Xiao, Y., Ding, J., Xu, L., Li, B., & Huang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909887 · Cited by 510
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Metadata
- Authors
- Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-01-22
- Volume
- 31
- Issue
- 12
- Pages
- e1806532-e1806532
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2914247429
- Cited by
- 261
- References
- 128
- FWCI
- 13.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.