The DOI matches its Crossref record; 219 of the 219 references it cites were found in a registry or an index.
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Abstract
Biological materials found in Nature such as nacre and bone are well recognized as light‐weight, strong, and tough structural materials. The remarkable toughness and damage tolerance of such biological materials are conferred through hierarchical assembly of their multiscale (i.e., atomic‐ to macroscale) architectures and components. Herein, the toughening mechanisms of different organisms at multilength scales are identified and summarized: macromolecular deformation, chemical bond breakage, and biomineral crystal imperfections at the atomic scale; biopolymer fibril reconfiguration/deformation and biomineral nanoparticle/nanoplatelet/nanorod translation, and crack reorientation at the nanoscale; crack deflection and twisting by characteristic features such as tubules and lamellae at the microscale; and structure and morphology optimization at the macroscale. In addition, the actual loading conditions of the natural organisms are different, leading to energy dissipation occurring at different time scales. These toughening mechanisms are further illustrated by comparing the experimental results with computational modeling. Modeling methods at different length and time scales are reviewed. Examples of biomimetic designs that realize the multiscale toughening mechanisms in engineering materials are introduced. Indeed, there is still plenty of room mimicking the strong and tough biological designs at the multilength and time scale in Nature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Chitin and chitosan: Properties and applications
Rinaudo, M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.06.001 · Cited by 8,259
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Self-citationThe conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citationMeyers, M. A. (1994) · Wiley eBooks · doi:10.1002/9780470172278 · Cited by 3,282
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Self-citationPrinting soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Cellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Chitin and chitosan: Chemistry, properties and applications
Dutta, P. K., Dutta, J., & Tripathi, V. S. (2004) · Journal of Scientific & Industrial Research · Cited by 1,214
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Self-citationSkeleton of Euplectella sp.: Structural Hierarchy from the Nanoscale to the Macroscale
Aizenberg, J., Weaver, J. C., Thanawala, M. S., Sundar, V. C., Morse, D. E., & Fratzl, P. (2005) · Science · doi:10.1126/science.1112255 · Cited by 1,144
Design and mechanical properties of insect cuticle
Vincent, J. F. V., & Wegst, U. G. K. (2004) · Arthropod Structure & Development · doi:10.1016/j.asd.2004.05.006 · Cited by 1,117
Crystal and Molecular Structure of a Collagen-Like Peptide at 1.9 Å Resolution
Bella, J., Eaton, M., Brodsky, B., & Berman, H. M. (1994) · Science · doi:10.1126/science.7695699 · Cited by 1,105
On the Fracture Toughness of Advanced Materials
Launey, M. E., & Ritchie, R. O. (2009) · Advanced Materials · doi:10.1002/adma.200803322 · Cited by 967
Self-citationStrong, tough and stiff bioinspired ceramics from brittle constituents
Bouville, F., Maire, E., Meille, S., Van de Moortèle, B., Stevenson, A. J., & Deville, S. (2014) · Nature Materials · doi:10.1038/nmat3915 · Cited by 959
The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer
Weaver, J. C., Milliron, G. W., Miserez, A., Evans-Lutterodt, K., Herrera, S., Gallana, I., Mershon, W. J., Swanson, B., Zavattieri, P., DiMasi, E., et al. (2012) · Science · doi:10.1126/science.1218764 · Cited by 938
Self-citationFantner, G. E., Hassenkam, T., Kindt, J. H., Weaver, J. C., Birkedal, H., Pechenik, L., Cutroni, J. A., Cidade, G. A. G., Stucky, G. D., Morse, D. E., et al. (2005) · Nature Materials · doi:10.1038/nmat1428 · Cited by 933
Wang, B., Yang, W., McKittrick, J., & Meyers, M. A. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.06.001 · Cited by 873
Self-citationMultimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
The mechanical efficiency of natural materials
Wegst, U. G. K., & Ashby, M. F. (2004) · Philosophical Magazine · doi:10.1080/14786430410001680935 · Cited by 821
Merger of structure and material in nacre and bone – Perspectives on de novo biomimetic materials
Espinosa, H. D., Rim, J. E., Barthelat, F., & Buehler, M. J. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2009.05.001 · Cited by 817
Nature designs tough collagen: Explaining the nanostructure of collagen fibrils
Buehler, M. J. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0603216103 · Cited by 803
Ice-templated porous alumina structures
Deville, S., Saiz, E., & Tomsia, A. P. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.11.003 · Cited by 769
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Self-citationMechanistic fracture criteria for the failure of human cortical bone
Nalla, R. K., Kinney, J. H., & Ritchie, R. O. (2003) · Nature Materials · doi:10.1038/nmat832 · Cited by 730
Self-citationStructural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 730
Self-citationSilicatein α: Cathepsin L-like protein in sponge biosilica
Shimizu, K., Cha, J., Stucky, G. D., & Morse, D. E. (1998) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.95.11.6234 · Cited by 714
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Fibrillar Structure and Mechanical Properties of Collagen
Fratzl, P., Misof, K., Zizak, I., Rapp, G., Amenitsch, H., & Bernstorff, S. (1998) · Journal of Structural Biology · doi:10.1006/jsbi.1998.3966 · Cited by 667
Rigid Biological Systems as Models for Synthetic Composites
Mayer, G. (2005) · Science · doi:10.1126/science.1116994 · Cited by 645
Biomimetic materials research: what can we really learn from nature's structural materials?
Fratzl, P. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0218 · Cited by 616
Raabe, D., Sachs, C., & Romano, P. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.027 · Cited by 607
Handbook of Materials Modeling
(2005) · Springer eBooks · doi:10.1007/1-4020-3286-2 · Cited by 581
The true toughness of human cortical bone measured with realistically short cracks
Koester, K. J., Ager, J. W., & Ritchie, R. O. (2008) · Nature Materials · doi:10.1038/nmat2221 · Cited by 558
Self-citationShock-Induced Localized Amorphization in Boron Carbide
Chen, M., McCauley, J. W., & Hemker, K. J. (2003) · Science · doi:10.1126/science.1080819 · Cited by 550
Molecular mechanics of mineralized collagen fibrils in bone
Nair, A. K., Gautieri, A., Chang, S.-W., & Buehler, M. J. (2013) · Nature Communications · doi:10.1038/ncomms2720 · Cited by 538
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
An Experimental Investigation of Deformation and Fracture of Nacre–Mother of Pearl
Barthelat, F., & Espinosa, H. D. (2007) · Experimental Mechanics · doi:10.1007/s11340-007-9040-1 · Cited by 504
Cell-wall recovery after irreversible deformation of wood
Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S., & Fratzl, P. (2003) · Nature Materials · doi:10.1038/nmat1019 · Cited by 500
Bone indentation recovery time correlates with bond reforming time
Thompson, J. B., Kindt, J. H., Drake, B., Hansma, H. G., Morse, D. E., & Hansma, P. K. (2001) · Nature · doi:10.1038/414773a · Cited by 468
Gao, H. (2006) · International Journal of Fracture · doi:10.1007/s10704-006-7156-4 · Cited by 466
The dentin–enamel junction and the fracture of human teeth
Imbeni, V., Kruzic, J. J., Marshall, G. W., Marshall, S. J., & Ritchie, R. O. (2005) · Nature Materials · doi:10.1038/nmat1323 · Cited by 465
Self-citationMagnetic assembly of colloidal superstructures with multipole symmetry
Erb, R. M., Son, H. S., Samanta, B., Rotello, V. M., & Yellen, B. B. (2009) · Nature · doi:10.1038/nature07766 · Cited by 454
Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2008) · Chemistry of Materials · doi:10.1021/cm702028z · Cited by 450
On the tear resistance of skin
Yang, W., Sherman, V. R., Gludovatz, B., Schaible, E., Stewart, P., Ritchie, R. O., & Meyers, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7649 · Cited by 440
Self-citationTowards High‐Performance Bioinspired Composites
Studart, A. R. (2012) · Advanced Materials · doi:10.1002/adma.201201471 · Cited by 429
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Nova, A., Keten, S., Pugno, N. M., Redaelli, A., & Buehler, M. J. (2010) · Nano Letters · doi:10.1021/nl101341w · Cited by 414
Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
Espinosa, H. D., Juster, A. L., Latourte, F. J., Loh, O. Y., Gregoire, D., & Zavattieri, P. D. (2011) · Nature Communications · doi:10.1038/ncomms1172 · Cited by 411
Self-citationBai, H., Walsh, F., Gludovatz, B., Delattre, B., Huang, C., Chen, Y., Tomsia, A. P., & Ritchie, R. O. (2016) · Advanced Materials · doi:10.1002/adma.201504313 · Cited by 410
Self-citationMagnetically assisted slip casting of bioinspired heterogeneous composites
Le Ferrand, H., Bouville, F., Niebel, T. P., & Studart, A. R. (2015) · Nature Materials · doi:10.1038/nmat4419 · Cited by 400
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
Magnetite from magnetotactic bacteria; size distributions and twinning
Devouard, B., Pósfai, M., Hua, X., Bazylinski, D. A., Frankel, R. B., & Buseck, P. R. (1998) · American Mineralogist · doi:10.2138/am-1997-11-1228 · Cited by 390
Quasi-static and dynamic mechanical response of Haliotis rufescens (abalone) shells
Menig, R., Meyers, M. H., Meyers, M. A., & Vecchio, K. S. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00443-7 · Cited by 388
The Structure, Functions, and Mechanical Properties of Keratin
McKittrick, J., Chen, P.-Y., Bodde, S. G., Yang, W., Novitskaya, E. E., & Meyers, M. A. (2012) · JOM · doi:10.1007/s11837-012-0302-8 · Cited by 385
Self-citationTough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300215 · Cited by 385
Overcoming the brittleness of glass through bio-inspiration and micro-architecture
Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Nature Communications · doi:10.1038/ncomms4166 · Cited by 384
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Ice-templating, freeze casting: Beyond materials processing
Deville, S. (2013) · Journal of Materials Research · doi:10.1557/jmr.2013.105 · Cited by 376
Buehler, M. J. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.04.001 · Cited by 356
Nikolov, S., Petrov, M., Lymperakis, L., Friák, M., Sachs, C., Fabritius, H., Raabe, D., & Neugebauer, J. (2010) · Advanced Materials · doi:10.1002/adma.200902019 · Cited by 349
Mechanistic aspects of fracture and R-curve behavior in human cortical bone
Nalla, R. K., Kruzic, J. J., Kinney, J. H., & Ritchie, R. O. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.017 · Cited by 342
Self-citationChitin and collagen as universal and alternative templates in biomineralization
Ehrlich, H. (2010) · International Geology Review · doi:10.1080/00206811003679521 · Cited by 342
Kaya, M., Mujtaba, M., Ehrlich, H., Salaberria, A. M., Baran, T., Amemiya, C. T., Galli, R., Akyuz, L., Sargin, I., & Labidi, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.076 · Cited by 341
The mechanical properties of natural materials. I. Material property charts
Ashby, M. F., Gibson, L. J., Wegst, U., & Olive, R. (1995) · Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences · doi:10.1098/rspa.1995.0075 · Cited by 339
Mechanical and morphological effects of strain rate on fatigue of compact bone
Schaffler, M. B., Radin, E. L., & Burr, D. B. (1989) · Bone · doi:10.1016/8756-3282(89)90055-0 · Cited by 338
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Launey, M. E., Munch, E., Alsem, D. H., Barth, H. B., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.03.003 · Cited by 333
Self-citationIn Situ Observation of Nanograin Rotation and Deformation in Nacre
Li, X., Xu, Z.-H., & Wang, R. (2006) · Nano Letters · doi:10.1021/nl061775u · Cited by 328
The materials science of collagen
Sherman, V. R., Yang, W., & Meyers, M. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.05.023 · Cited by 324
Sacrificial Bonds and Hidden Length: Unraveling Molecular Mesostructures in Tough Materials
Fantner, G. E., Oroudjev, E., Schitter, G., Golde, L. S., Thurner, P., Finch, M. M., Turner, P., Gutsmann, T., Morse, D. E., Hansma, H., et al. (2006) · Biophysical Journal · doi:10.1529/biophysj.105.069344 · Cited by 313
Collagen: Structure and Mechanics, an Introduction
Fratzl, P. (2008) · Collagen · doi:10.1007/978-0-387-73906-9_1 · Cited by 307
Fabritius, H., Sachs, C., Triguero, P. R., & Raabe, D. (2009) · Advanced Materials · doi:10.1002/adma.200801219 · Cited by 302
Buehler, M. J. (2006) · Journal of Materials Research · doi:10.1557/jmr.2006.0236 · Cited by 298
A novel biomimetic approach to the design of high-performance ceramic–metal composites
Launey, M. E., Munch, E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0331 · Cited by 294
Self-citationTwisting cracks in Bouligand structures
Suksangpanya, N., Yaraghi, N. A., Kisailus, D., & Zavattieri, P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.06.010 · Cited by 294
Self-citationMolecular nanomechanics of nascent bone: fibrillar toughening by mineralization
Buehler, M. J. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/29/295102 · Cited by 278
Fratzl, P., Gupta, H. S., Fischer, F. D., & Kolednik, O. (2007) · Advanced Materials · doi:10.1002/adma.200602394 · Cited by 278
Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating
Munch, E., Saiz, E., Tomsia, A. P., & Deville, S. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03087.x · Cited by 274
Growth and structure in abalone shell
Lin, A., & Meyers, M. A. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.06.072 · Cited by 274
Nanostructure and molecular mechanics of spider dragline silk protein assemblies
Keten, S., & Buehler, M. J. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0149 · Cited by 269
A Sinusoidally Architected Helicoidal Biocomposite
Yaraghi, N. A., Guarín‐Zapata, N., Grunenfelder, L. K., Hintsala, E., Bhowmick, S., Hiller, J. M., Betts, M., Principe, E. L., Jung, J., Sheppard, L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600786 · Cited by 268
Self-citationInterchain hydrogen bonds via bound water molecules in the collagen triple helix
Ramachandran, G. X., & Chandrasekharan, R. (1968) · Biopolymers · doi:10.1002/bip.1968.360061109 · Cited by 266
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Brunner, E., Richthammer, P., Ehrlich, H., Paasch, S., Simon, P., Ueberlein, S., & van Pée, K. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200905028 · Cited by 245
Cellulose and collagen: from fibres to tissues
Fratzl, P. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00011-6 · Cited by 245
Analysis of an ultra hard magnetic biomineral in chiton radular teeth
Weaver, J. C., Wang, Q., Miserez, A., Tantuccio, A., Stromberg, R., Bozhilov, K. N., Maxwell, P., Nay, R., Heier, S. T., DiMasi, E., et al. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70016-x · Cited by 245
Self-citationEnergy absorbent natural materials and bioinspired design strategies: A review
McKittrick, J., Chen, P.-Y., Tombolato, L., Novitskaya, E. E., Trim, M. W., Hirata, G. A., Olevsky, E. A., Horstemeyer, M. F., & Meyers, M. A. (2010) · Materials Science and Engineering: C · doi:10.1016/j.msec.2010.01.011 · Cited by 240
Self-citationCrack twisting and toughening strategies in Bouligand architectures
Suksangpanya, N., Yaraghi, N. A., Pipes, R. B., Kisailus, D., & Zavattieri, P. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.06.004 · Cited by 238
Self-citationYap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.015 · Cited by 228
Atomistic Modeling of Materials Failure
(2008) · Springer eBooks · doi:10.1007/978-0-387-76426-9 · Cited by 227
Micromechanical models to guide the development of synthetic ‘brick and mortar’ composites
Begley, M. R., Philips, N. R., Compton, B. G., Wilbrink, D. V., Ritchie, R. O., & Utz, M. (2012) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2012.03.002 · Cited by 222
Self-citationHandbook of Materials Modeling
(2005) · Materials Today · doi:10.1016/s1369-7021(05)71166-4 · Cited by 216
Extreme strength observed in limpet teeth
Barber, A. H., Lu, D., & Pugno, N. M. (2015) · Journal of the Royal Society Interface · doi:10.1098/rsif.2014.1326 · Cited by 212
Micromechanical properties of biological silica in skeletons of deep-sea sponges
Woesz, A., Weaver, J. C., Kazanci, M., Dauphin, Y., Aizenberg, J., Morse, D. E., & Fratzl, P. (2006) · Journal of Materials Research · doi:10.1557/jmr.2006.0251 · Cited by 203
BUEHLER, M., KETEN, S., & ACKBAROW, T. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.002 · Cited by 194
Chen, P.-Y., Stokes, A. G., & McKittrick, J. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.011 · Cited by 186
Self-citationAdditive Manufacturing and Performance of Architectured Cement‐Based Materials
Moini, M., Olek, J., Youngblood, J. P., Magee, B., & Zavattieri, P. D. (2018) · Advanced Materials · doi:10.1002/adma.201802123 · Cited by 184
Self-citationNanotwin-governed toughening mechanism in hierarchically structured biological materials
Shin, Y. A., Yin, S., Li, X., Lee, S., Moon, S., Jeong, J., Kwon, M., Yoo, S. J., Kim, Y.-M., Zhang, T., et al. (2016) · Nature Communications · doi:10.1038/ncomms10772 · Cited by 182
Mechanistic aspects of the fracture toughness of elk antler bone
Launey, M. E., Chen, P.-Y., McKittrick, J., & Ritchie, R. O. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.026 · Cited by 180
Self-citationBiomimetic additive manufactured polymer composites for improved impact resistance
Gu, G. X., Takaffoli, M., Hsieh, A. J., & Buehler, M. J. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.006 · Cited by 180
Biomimetic Structural Materials: Inspiration from Design and Assembly
Yaraghi, N. A., & Kisailus, D. (2018) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-040215-112621 · Cited by 176
Self-citationBone‐Inspired Materials by Design: Toughness Amplification Observed Using 3D Printing and Testing
Libonati, F., Gu, G. X., Qin, Z., Vergani, L., & Buehler, M. J. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600143 · Cited by 175
Pangolin armor: Overlapping, structure, and mechanical properties of the keratinous scales
Wang, B., Yang, W., Sherman, V. R., & Meyers, M. A. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.028 · Cited by 173
Lin, E., Li, Y., Ortiz, C., & Boyce, M. C. (2014) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2014.08.011 · Cited by 171
The role of quasi-plasticity in the extreme contact damage tolerance of the stomatopod dactyl club
Amini, S., Tadayon, M., Idapalapati, S., & Miserez, A. (2015) · Nature Materials · doi:10.1038/nmat4309 · Cited by 171
Design Complexity and Fracture Control in the Equine Hoof Wall
Kasapi, M. A., & Gosline, J. M. (1997) · Journal of Experimental Biology · doi:10.1242/jeb.200.11.1639 · Cited by 169
Ehrlich, H., Deutzmann, R., Brunner, E., Cappellini, E., Koon, H., Solazzo, C., Yang, Y., Ashford, D., Thomas-Oates, J., Lubeck, M., et al. (2010) · Nature Chemistry · doi:10.1038/nchem.899 · Cited by 168
Micro-structure and mechanical properties of the turtle carapace as a biological composite shield
Achrai, B., & Wagner, H. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.023 · Cited by 164
Zimmermann, E. A., Gludovatz, B., Schaible, E., Busse, B., & Ritchie, R. O. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.03.066 · Cited by 163
Self-citationMicrostructure, elastic properties and deformation mechanisms of horn keratin
Tombolato, L., Novitskaya, E. E., Chen, P., Sheppard, F. A., & McKittrick, J. M. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.033 · Cited by 156
Self-citationPrinting nature: Unraveling the role of nacre's mineral bridges
Gu, G. X., Libonati, F., Wettermark, S. D., & Buehler, M. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.007 · Cited by 151
Magnetic freeze casting inspired by nature
Porter, M. M., Yeh, M., Strawson, J., Goehring, T., Lujan, S., Siripasopsotorn, P., Meyers, M. A., & McKittrick, J. M. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.058 · Cited by 146
Self-citationHambli, R., Khaterchi, H., & Benhamou, C.-L. (2010) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-010-0222-x · Cited by 145
Structure and fracture resistance of alligator gar (Atractosteus spatula) armored fish scales
Yang, W., Gludovatz, B., Zimmermann, E. A., Bale, H., Ritchie, R. O., & Meyers, M. A. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.026 · Cited by 143
Self-citationZhang, P., Heyne, M. A., & To, A. C. (2015) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2015.06.015 · Cited by 140
Ab initio elastic properties and tensile strength of crystalline hydroxyapatite
Ching, W. Y., Rulis, P., & Misra, A. K. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.04.030 · Cited by 139
A mechanical analysis of woodpecker drumming and its application to shock-absorbing systems
Yoon, S., & Park, S. (2011) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/6/1/016003 · Cited by 139
Flexibility and protection by design: imbricated hybrid microstructures of bio-inspired armor
Rudykh, S., Ortiz, C., & Boyce, M. C. (2015) · Soft Matter · doi:10.1039/c4sm02907k · Cited by 139
Naglieri, V., Gludovatz, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.022 · Cited by 133
Self-citationInterfacial shear strength in abalone nacre
Lin, A. Y.-M., & Meyers, M. A. (2009) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2009.04.003 · Cited by 132
Thermoresponsive Composite Hydrogels with Aligned Macroporous Structure by Ice-Templated Assembly
Bai, H., Polini, A., Delattre, B., & Tomsia, A. P. (2013) · Chemistry of Materials · doi:10.1021/cm4025827 · Cited by 130
Bioinspired Scaffolds with Varying Pore Architectures and Mechanical Properties
Porter, M. M., Imperio, R., Wen, M., Meyers, M. A., & McKittrick, J. M. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201302958 · Cited by 129
Self-citationNano-mechanical properties of individual mineralized collagen fibrils from bone tissue
Hang, F., & Barber, A. H. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0413 · Cited by 127
Yang, W., Meyers, M. A., & Ritchie, R. O. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.01.002 · Cited by 127
Self-citationNovel Defense Mechanisms in the Armor of the Scales of the “Living Fossil” Coelacanth Fish
Quan, H., Yang, W., Schaible, E. G., Ritchie, R. O., & Meyers, M. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804237 · Cited by 125
Self-citationMineral Nano‐Interconnectivity Stiffens and Toughens Nacre‐like Composite Materials
Grossman, M., Bouville, F., Erni, F., Masania, K., Libanori, R., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201605039 · Cited by 123
Ehrlich, H., Simon, P., Carrillo‐Cabrera, W. G., Bazhenov, V. V., Botting, J. P., Ilan, M., Ereskovsky, A. V., Muricy, G., Worch, H., Mensch, A., et al. (2010) · Chemistry of Materials · doi:10.1021/cm9026607 · Cited by 121
Hidden contributions of the enamel rods on the fracture resistance of human teeth
Yahyazadehfar, M., Bajaj, D., & Arola, D. D. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.020 · Cited by 121
Nikolov, S., Fabritius, H. O., Petrov, M., Friák, M., Lymperakis, L., Sachs, C., Raabe, D., & Neugebauer, J. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.09.015 · Cited by 118
Why the seahorse tail is square
Porter, M. M., Adriaens, D., Hatton, R. L., Meyers, M. A., & McKittrick, J. M. (2015) · Science · doi:10.1126/science.aaa6683 · Cited by 117
Self-citationStructure–property-processing correlations in freeze-cast composite scaffolds
Hunger, P. M., Donius, A. E., & Wegst, U. G. K. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.01.012 · Cited by 116
A laser-engraved glass duplicating the structure, mechanics and performance of natural nacre
Mirkhalaf, M., & Barthelat, F. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/2/026005 · Cited by 115
Printing mesoscale architectures
Raney, J. R., & Lewis, J. A. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.235 · Cited by 115
Reitner, J. (2011) · Choice Reviews Online · doi:10.5860/choice.49-0014 · Cited by 112
On the Materials Science of Nature's Arms Race
Liu, Z., Zhang, Z., & Ritchie, R. O. (2018) · Advanced Materials · doi:10.1002/adma.201705220 · Cited by 112
Self-citationCrustacean‐Derived Biomimetic Components and Nanostructured Composites
Grunenfelder, L. K., Herrera, S. A., & Kisailus, D. (2014) · Small · doi:10.1002/smll.201400559 · Cited by 109
Self-citationA comparative study of bio-inspired protective scales using 3D printing and mechanical testing
Martini, R., Balit, Y., & Barthelat, F. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.025 · Cited by 109
Recent Advances in Dynamic Indentation Fracture, Impact Damage and Fragmentation of Ceramics
Subhash, G., Maiti, S., Geubelle, P. H., & Ghosh, D. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02624.x · Cited by 107
Atomistic model of the spider silk nanostructure
Keten, S., & Buehler, M. J. (2010) · Applied Physics Letters · doi:10.1063/1.3385388 · Cited by 106
Gupta, H. S., Krauß, S., Kerschnitzki, M., Karunaratne, A., Dunlop, J., Barber, A. H., Boesecke, P., Funari, S. S., & Fratzl, P. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.03.020 · Cited by 105
Uncovering high-strain rate protection mechanism in nacre
Huang, Z., Li, H., Pan, Z., Wei, Q., Chao, Y. J., & Li, X. (2011) · Scientific Reports · doi:10.1038/srep00148 · Cited by 105
Naglieri, V., Bale, H., Gludovatz, B., Tomsia, A. P., & Ritchie, R. O. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.08.006 · Cited by 104
Self-citationZimmermann, E. A., Schaible, E. G., Gludovatz, B., Schmidt, F. N., Riedel, C., Krause, M., Vettorazzi, E., Acevedo, C., Hahn, M. P., Püschel, K., et al. (2016) · Scientific Reports · doi:10.1038/srep21072 · Cited by 104
Self-citationIn vitro fracture toughness of human dentin
Imbeni, V., Nalla, R. K., Bosi, C., Kinney, J. H., & Ritchie, R. O. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10548 · Cited by 102
Self-citationConnors, M. J., Ehrlich, H., Hog, M., Godeffroy, C., Araya, S., Kallai, I., Gazit, D., Boyce, M. C., & Christine Ortiz, B. (2012) · Journal of Structural Biology · doi:10.1016/j.jsb.2011.12.019 · Cited by 100
Abid, N. H., Pro, J. W., & Barthelat, F. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.10.012 · Cited by 99
Freeze-cast hydroxyapatite scaffolds for bone tissue engineering applications
Fu, Q., Rahaman, M. N., Dogan, F., & Bal, B. S. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/2/025005 · Cited by 94
Simon, P., Grüner, D., Worch, H., Pompe, W., Lichte, H., Khassawna, T. E., Heiß, C., Wenisch, S., & Kniep, R. (2018) · Scientific Reports · doi:10.1038/s41598-018-31983-5 · Cited by 94
Calcification provides mechanical reinforcement to whale baleen α-keratin
Szewciw, L., de Kerckhove, D. D., Grime, G. W., & Fudge, D. S. (2010) · Proceedings of the Royal Society of London. Biological Sciences · doi:10.1098/rspb.2010.0399 · Cited by 92
Mechanical properties of hydroxyapatite single crystals from nanoindentation data
Zamiri, A. R., & De, S. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.11.001 · Cited by 91
Grunenfelder, L. K., de Obaldia, E. E., Wang, Q., Li, D., Weden, B., Salinas, C., Wuhrer, R., Zavattieri, P. D., & Kisailus, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401091 · Cited by 89
Self-citationPhase Transformations and Structural Developments in the Radular Teeth of Cryptochiton Stelleri
Wang, Q., Nemoto, M., Li, D., Weaver, J. C., Weden, B., Stegemeier, J. P., Bozhilov, K. N., Wood, L. R., Milliron, G. W., Kim, C., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202894 · Cited by 89
Self-citationThe armored carapace of the boxfish
Yang, W., Naleway, S. E., Porter, M. M., Meyers, M. A., & McKittrick, J. M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.05.024 · Cited by 88
Self-citationBiomimetic Materials by Freeze Casting
Porter, M. M., McKittrick, J. M., & Meyers, M. A. (2013) · JOM · doi:10.1007/s11837-013-0606-3 · Cited by 87
Self-citationKrauß, S., Fratzl, P., Seto, J., Currey, J. D., Estévez, J. A., Funari, S. S., & Gupta, H. S. (2009) · Bone · doi:10.1016/j.bone.2009.02.009 · Cited by 87
Nanoasperity: Structure Origin of Nacre-Inspired Nanocomposites
Xia, S., Wang, Z., Chen, H., Fu, W., Wang, J., Li, Z., & Jiang, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b00119 · Cited by 83
Highly deformable bones: Unusual deformation mechanisms of seahorse armor
Porter, M. M., Novitskaya, E. E., Castro-Ceseña, A. B., Meyers, M. A., & McKittrick, J. M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.045 · Cited by 82
Self-citationXiao, X., & Hu, J. (2016) · Scientific Reports · doi:10.1038/srep26393 · Cited by 81
Examination of the α-Chitin Structure and Decrystallization Thermodynamics at the Nanoscale
Beckham, G. T., & Crowley, M. F. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp200912q · Cited by 79
Biosilica as a source for inspiration in biological materials science
Wysokowski, M., Jesionowski, T., & Ehrlich, H. (2018) · American Mineralogist · doi:10.2138/am-2018-6429 · Cited by 78
Hierarchical structural design for fracture resistance in the shell of the pteropod Clio pyramidata
Li, L., Weaver, J. C., & Christine Ortiz, B. (2015) · Nature Communications · doi:10.1038/ncomms7216 · Cited by 77
Composite theory and the effect of water on the stiffness of horn keratin
Kitchener, A. C., & Vincent, J. F. V. (1987) · Journal of Materials Science · doi:10.1007/bf01233138 · Cited by 77
Ecologically Driven Ultrastructural and Hydrodynamic Designs in Stomatopod Cuticles
Grunenfelder, L. K., Milliron, G. W., Herrera, S. A., Gallana, I., Yaraghi, N. A., Hughes, N. C., Evans‐Lutterodt, K., Zavattieri, P. D., & Kisailus, D. (2018) · Advanced Materials · doi:10.1002/adma.201705295 · Cited by 77
Self-citationKasapi, M. A., & Gosline, J. M. (1999) · Journal of Experimental Biology · doi:10.1242/jeb.202.4.377 · Cited by 74
Nonlinear hierarchical multiscale modeling of cortical bone considering its nanoscale microstructure
Ghanbari, J., & Naghdabadi, R. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.02.014 · Cited by 71
Drake, A., Donahue, T. L. H., Stansloski, M. J., Fox, K. A., Wheatley, B., & Donahue, S. W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.019 · Cited by 69
Ogden, T. A., Prisbrey, M., Nelson, I. B., Raeymaekers, B., & Naleway, S. E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.107561 · Cited by 68
de Obaldia, E. E., Jeong, C., Grunenfelder, L. K., Kisailus, D., & Zavattieri, P. D. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.03.026 · Cited by 67
Self-citationPreiss, A., Su, B., Collins, S., & Simpson, D. J. W. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.12.031 · Cited by 67
Stiff, porous scaffolds from magnetized alumina particles aligned by magnetic freeze casting
Frank, M. B., Naleway, S. E., Haroush, T., Liu, C., Siu, S. H., Ng, J., Torres, I., Ismail, A., Karandikar, K. K., Porter, M. M., et al. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.246 · Cited by 66
Self-citationRemarkable shape memory effect of a natural biopolymer in aqueous environment
Liu, Z., Jiao, D., & Zhang, Z. F. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.06.032 · Cited by 65
Self-citationDimensional analysis and parametric studies for designing artificial nacre
Rim, J. E., Zavattieri, P. D., Juster, A., & Espinosa, H. D. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.11.006 · Cited by 65
Self-citationTorsional properties of helix-reinforced composites fabricated by magnetic freeze casting
Porter, M. M., Meraz, L., Calderon, A., Choi, H., Chouhan, A., Wang, L. Z., Meyers, M. A., & McKittrick, J. M. (2014) · Composite Structures · doi:10.1016/j.compstruct.2014.08.033 · Cited by 65
Self-citationStructural analysis of the tongue and hyoid apparatus in a woodpecker
Jung, J., Naleway, S. E., Yaraghi, N. A., Herrera, S. A., Sherman, V. R., Bushong, E. A., Ellisman, M. H., Kisailus, D., & McKittrick, J. M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.030 · Cited by 65
Self-citationPompe, W., Worch, H., Habraken, W. J. E. M., Simon, P., Kniep, R., Ehrlich, H., & Paufler, P. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00673b · Cited by 64
Nanomechanical and Structural Properties of Native Cellulose Under Compressive Stress
Quesada-Cabrera, R., Meersman, F., McMillan, P. F., & Dmitriev, V. (2011) · Biomacromolecules · doi:10.1021/bm200253h · Cited by 63
Fracture toughness of horns and a reinterpretation of the horning behaviour of bovids
Kitchener, A. C. (1987) · Journal of Zoology · doi:10.1111/j.1469-7998.1987.tb03730.x · Cited by 62
Impact testing of structural biological materials
Lee, S., Novitskaya, E. E., Reynante, B. M., Vasquez, J., Urbaniak, R., TAKAHASHI, T., Woolley, E., Tombolato, L., Chen, P., & McKittrick, J. M. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.10.017 · Cited by 62
Self-citationPreparation of a Dense/Porous BiLayered Ceramic by Applying an Electric Field During Freeze Casting
Zhang, Y., Hu, L., & Han, J. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03110.x · Cited by 62
Divakar, P., Yin, K., & Wegst, U. G. K. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.012 · Cited by 61
Reproducibility of ZrO2-based freeze casting for biomaterials
Naleway, S. E., Fickas, K. C., Maker, Y. N., Meyers, M. A., & McKittrick, J. M. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.12.012 · Cited by 57
Self-citationJohnson, K. L., Trim, M., Francis, D. K., Whittington, W. R., MILLER, J. A., Bennett, C. E., & Horstemeyer, M. F. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.033 · Cited by 56
Calcite Reinforced Silica–Silica Joints in the Biocomposite Skeleton of Deep‐Sea Glass Sponges
Ehrlich, H., Brunner, E., Simon, P., Bazhenov, V. V., Botting, J. P., Tabachnick, K. R., Springer, A., Kummer, K., Vyalikh, D. V., Molodtsov, S. L., et al. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100749 · Cited by 55
Toughening of thin ceramic plates using bioinspired surface patterns
Malik, I. A., & Barthelat, F. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.07.010 · Cited by 55
Hambli, R. (2011) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2011.02.014 · Cited by 53
Shishehbor, M., & Zavattieri, P. D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.002 · Cited by 53
Self-citationEnhanced toughening of the crossed lamellar structure revealed by nanoindentation
Salinas, C., de Obaldia, E. E., Jeong, C., Hernández, J., Zavattieri, P. D., & Kisailus, D. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.05.033 · Cited by 49
Self-citationThe Stomatopod Telson: Convergent Evolution in the Development of a Biological Shield
Yaraghi, N. A., Trikanad, A. A., Restrepo, D., Huang, W. D., Rivera, J., Herrera, S. A., Zhernenkov, M., Parkinson, D. Y., Caldwell, R. L., Zavattieri, P. D., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902238 · Cited by 49
Self-citationProcessing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites
Guo, R., Shen, P., Sun, C. N., Wang, Y., Shaga, A., & Jiang, Q. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.008 · Cited by 48
How Water Can Affect Keratin: Hydration‐Driven Recovery of Bighorn Sheep ( Ovis Canadensis ) Horns
Huang, W. D., Zaheri, A., Yang, W., Kisailus, D., Ritchie, R. O., Espinosa, H. D., & McKittrick, J. M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901077 · Cited by 48
Self-citationSteered Molecular Dynamics Study of Mechanical Response of Full Length and Short Collagen Molecules
Pradhan, S. M., Katti, D. R., & Katti, K. S. (2011) · Journal of Nanomechanics and Micromechanics · doi:10.1061/(asce)nm.2153-5477.0000035 · Cited by 46
Tough and deformable glasses with bioinspired cross-ply architectures
Zhen, Y., Dastjerdi, A. K., & Barthelat, F. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.012 · Cited by 45
Cited by
Hierarchically structured bioinspired nanocomposites
Nepal, D., Kang, S., Adstedt, K. M., Kanhaiya, K., Bockstaller, M. R., Brinson, L. C., Buehler, M. J., Coveney, P. V., Dayal, K., El-Awady, J. A., et al. (2023) · Nature Materials · doi:10.1038/s41563-022-01384-1 · Cited by 594
Digital dentistry: The new state of the art — Is it disruptive or destructive?
Rekow, E. D. (2020) · Dental Materials · doi:10.1016/j.dental.2019.08.103 · Cited by 284
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Zhang, M., Zhao, N., Yu, Q., Liu, Z., Qu, R., Zhang, J., Li, S., Ren, D., Berto, F., Zhang, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30873-9 · Cited by 267
Self-citationA natural impact-resistant bicontinuous composite nanoparticle coating
Huang, W., Shishehbor, M., Guarín-Zapata, N., Kirchhofer, N. D., Li, J., Cruz, L., Wang, T., Bhowmick, S., Stauffer, D., Manimunda, P., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0768-7 · Cited by 258
Self-citation
Metadata
- Authors
- Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-07-03
- Volume
- 31
- Issue
- 43
- Pages
- e1901561-e1901561
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2953997303
- Cited by
- 662
- References
- 219
- FWCI
- 15.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.