Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Items 101–200 of 600
Convergence of 3D Bioprinting and Nanotechnology in Tissue Engineering Scaffolds
Zhang, S., Chen, X., Shan, M., Hao, Z., Zhang, X., Meng, L., Zhai, Z., Zhang, L., Liu, X., & Wang, X. S. (2023) · Biomimetics · doi:10.3390/biomimetics8010094 · Cited by 101
“When the shear rate is increased, all the as‐prepared hydrogel scaffolds exhibit shear‐thinning behavior with decreasing viscosity; this may be related to the typical breakdown of the hydrogel nanofiber network at high shear rates [36].”
BackgroundLi, S., Li, X., Xu, Y., Fan, C., Li, Z. A., Zheng, L., Luo, B., Li, Z., Lin, B., Zha, Z., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.09.012 · Cited by 86
“Moreover, appropriate crosslinking could elevate the compression strength, while an excessively high crosslinking density on the other hand could result in a stiffer and more brittle network [41] (Fig.”
BackgroundRecent Strategies for Strengthening and Stiffening Tough Hydrogels
Ji, D., & Kim, J. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100026 · Cited by 86
Advances in 3D bioprinting for regenerative medicine applications
Loukelis, K., Koutsomarkos, N., Mikos, A. G., & Chatzinikolaidou, Μ. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbae033 · Cited by 101
Bhattacharyya, A., Janarthanan, G., Tran, H. N., Ham, H. J., Yoon, J.-H., & Noh, I. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128971 · Cited by 80
Entanglements and Fracture in Polymers
Kang, T., Dai, J., Huang, Y., Kim, H., Keten, S., & Kim, J. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00459 · Cited by 97
Wang, X., Xie, A., Cao, P., Yang, J., Ong, W. L., Zhang, K., & Ho, G. W. (2024) · Advanced Materials · doi:10.1002/adma.202309952 · Cited by 92
From materials to devices using fused deposition modeling: A state-of-art review
Zhang, P., Wang, Z., Li, J., Li, X., & Cheng, L. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0101 · Cited by 86
“After reviewing the current and emerging approaches in hydrogel design and bioink reinforcement techniques, Gaharwar and coworkers [1] confidently concluded that additive manufacturing is one of the successful methods for developing next-generation cellularized 3D scaffolds to mimic anatomical size, tissue architectur…”
MethodClick Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities
Mueller, E., Poulin, I., Bodnaryk, W. J., & Hoare, T. R. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.1c01105 · Cited by 90
Bioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 88
Janarthanan, G., Shin, H. S., Kim, I.-G., Ji, P., Chung, E., Lee, C., & Noh, I. (2020) · Biofabrication · doi:10.1088/1758-5090/aba2f7 · Cited by 76
“Chemically crosslinked hydrogels produce highly stable and robust networks; however, the high stiffness may restrict cell growth and also may affect cell migration [71, 72].”
BackgroundLight Processable Starch Hydrogels
Noè, C., Tonda‐Turo, C., Chiappone, A., Sangermano, M., & Hakkarainen, M. (2020) · Polymers · doi:10.3390/polym12061359 · Cited by 85
Tissue-specific engineering: 3D bioprinting in regenerative medicine
Wang, Z., Kapadia, W., Li, C., Lin, F., Pereira, R. F., Granja, P. L., Sarmento, B., & Cui, W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.11.044 · Cited by 73
Silk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting
Sakai, S., Yoshii, A., Sakurai, S., Horii, K., & Nagasuna, O. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100078 · Cited by 75
“In the approach of the use of supporting hydrogels, cells are printed in a solution called the ‘bioink’ which can be cross-linked or stabilized during or immediately after printing [1,2].”
BackgroundInfluentialHydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
Liu, S., Zhang, H., Ahlfeld, T., Kilian, D., Liu, Y., Gelinsky, M., & Hu, Q. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00194-3 · Cited by 79
“Meanwhile, the combination of various biopolymer hydrogels can promote the mechanical, rheological, and biological properties of biomaterials for 3D printing [13].”
BackgroundWu, J., Yun, Z., Song, W., Yu, T., Xue, W., Liu, Q., & Sun, X. (2024) · Theranostics · doi:10.7150/thno.89493 · Cited by 82
Suntornnond, R., Ng, W. L., Huang, X., Yeow, C. H. E., & Yeong, W. Y. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb00442a · Cited by 76
Doroteo, M. C., Mandujano-Tinoco, E. A., & Krötzsch, E. (2020) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2020.129782 · Cited by 79
Design of hydrogel-based scaffolds for the treatment of spinal cord injuries
Ghane, N., Beigi, M., Labbaf, S., Nasr-Esfahani, M.-H., & Kiani, A. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01842b · Cited by 79
Conductive Hydrogel-Based Electrochemical Sensor: A Soft Platform for Capturing Analyte
Fu, L., Yu, A., & Lai, G. (2021) · Chemosensors · doi:10.3390/chemosensors9100282 · Cited by 74
3D bioprinting of cell-laden constructs for regenerative medicine
Li, C., & Cui, W. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.11.005 · Cited by 70
Bioink Formulations for Bone Tissue Regeneration
Li, N., Guo, R., & Zhang, Z. J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.630488 · Cited by 67
“, hydrogen bonds, ionic bonds, electrostatic interactions, but can be actuated by chemical covalent cross-linking where appropriate/needed (Chimene et al., 2020a).”
BackgroundDesign of hydrogel-based scaffolds for in vitro three-dimensional human skin model reconstruction
Tan, S. H., Chua, D. A. C., Tang, J. R. J., Bonnard, C., Leavesley, D. I., & Liang, K. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.09.068 · Cited by 77
Rheological, structural, and biological trade-offs in bioink design for 3D bioprinting
Elango, J., & Zamora-Ledezma, C. (2025) · Gels · doi:10.3390/gels11080659 · Cited by 75
“Furthermore, the mechanical properties of the bioinks can be adjusted by altering the polymer concentration, crosslinking density, and incorporating reinforc-Gels ing agents such as nanoparticles or microfibers [76].”
Bakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Granular hydrogels for 3D bioprinting applications
Cheng, W., Zhang, J., Liu, J., & Yu, Z. (2020) · View · doi:10.1002/viw.20200060 · Cited by 75
3D printing of living structural biocomposites
Hirsch, M., Lucherini, L., Zhao, R., Saracho, A. C., & Amstad, E. (2023) · Materials Today · doi:10.1016/j.mattod.2023.02.001 · Cited by 70
A Guide to Printed Stretchable Conductors
Sakorikar, T., Mihaliak, N., Krisnadi, F., Ma, J., Kim, T., Kong, M., Awartani, O., & Dickey, M. D. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00569 · Cited by 71
Zhang, J., Qian, S., Chen, L., Chen, L., Zhao, L., & Feng, J. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.01.012 · Cited by 65
Li, Y., Liu, W., Li, S., Zhang, M., Yang, F., & Wang, S. (2021) · Journal of Future Foods · doi:10.1016/j.jfutfo.2021.09.005 · Cited by 70
Noroozi, R., Shamekhi, M. A., Mahmoudi, R., Zolfagharian, A., Asgari, F., Mousavizadeh, A., Bodaghi, M., Hadi, A., & Haghighipour, N. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac7308 · Cited by 71
Microtissue‐Based Bioink as a Chondrocyte Microshelter for DLP Bioprinting
Xie, X., Wu, S., Mou, S., Guo, N., Wang, Z., & Sun, J. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201877 · Cited by 71
Bioprinting of alginate-carboxymethyl chitosan scaffolds for enamel tissue engineering in vitro
Mohabatpour, F., Duan, X., Yazdanpanah, Z., Tabil, X. L., Lobanova, L., Zhu, N., Papagerakis, S. M., Chen, D., & Papagerakis, P. (2022) · Biofabrication · doi:10.1088/1758-5090/acab35 · Cited by 73
Ghobashy, M. M., El‐Damhougy, B. K., El-Wahab, H. A., Madani, M., Amin, M. A., Naser, A., Abdelhai, F., Nady, N., Meganid, A. S., Alkhursani, S. A., et al. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5105 · Cited by 61
Chen, H., Fei, F., Li, X., Nie, Z., Zhou, D., Liu, L., Zhang, J., Zhang, H., Fei, Z., & Xu, T. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.019 · Cited by 70
“provided by the dual crosslinked interpenetrating macromolecular network, the TSHSP hydrogel performed well in printing [4].”
BackgroundInfluential3D Printed Biocatalytic Living Materials with Dual‐Network Reinforced Bioinks
He, F., Ou, Y., Liu, J., Huang, Q., Tang, B., Xin, F., Zhang, J., Jiang, M., Chen, S., & Yu, Z. (2022) · Small · doi:10.1002/smll.202104820 · Cited by 61
In vivo bioprinting: Broadening the therapeutic horizon for tissue injuries
Zhao, W., Hu, C., & Xu, T. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.01.018 · Cited by 76
“Research into the regulation of the printability and tissue adhesion of bioinks that serves in vivo bioprinting is currently being investigated [72,201].”
BackgroundNanoclay-composite hydrogels for bone tissue engineering
Hwang, H. S., & Lee, C.-S. (2024) · Gels · doi:10.3390/gels10080513 · Cited by 60
“The mechanical strength of hydrogels is influenced by factors including polymer chain length, cross-linking density, and the presence of reinforcing agents such as nanoparticles and fibers [35–38].”
BackgroundAnindita, S. N., Conti, R., Zauchner, D., Paunović, N., Qiu, W., Buzhor, M. G., Krivitsky, A., Luo, Z., Müller, R., Grützmacher, H., et al. (2023) · Aggregate · doi:10.1002/agt2.368 · Cited by 63
Double network laminarin-boronic/alginate dynamic bioink for 3D bioprinting cell-laden constructs
Amaral, A. J. R., Gaspar, V. M., Lavrador, P., & Mano, J. F. (2021) · Biofabrication · doi:10.1088/1758-5090/abfd79 · Cited by 59
Hydrogel: A potential therapeutic material for bone tissue engineering
Zhang, Y., Li, Z., Guan, J., Mao, Y., & Zhou, P. (2021) · AIP Advances · doi:10.1063/5.0035504 · Cited by 57
Advanced Nanocomposite Hydrogels for Cartilage Tissue Engineering
Huang, J., Liu, F., Su, H., Xiong, J., Yang, L., Xia, J., & Liang, Y. (2022) · Gels · doi:10.3390/gels8020138 · Cited by 63
“Common 3D bioprinting technologies used in bone-tissue engineering have included stereolithography appearance (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), ink jet printing, and bioink [106,107].”
BackgroundLu, J., Lin, X., Wang, S., Xu, X., Zhou, Y., Zhang, Y., Li, Q., & Liu, H. (2023) · Green Chemistry · doi:10.1039/d2gc04711j · Cited by 59
Emerging biomimetic nanotechnology in orthopedic diseases: progress, challenges, and opportunities
Zhang, Z., Zhou, J. M., Chuang, L. I. U., Zhang, J., Shibata, Y., Kong, N., Corbo, C., Harris, M. B., & Tao, W. (2022) · Trends in Chemistry · doi:10.1016/j.trechm.2022.02.002 · Cited by 57
Advanced 3D-Printing Bioinks for Articular Cartilage Repair
Liang, Q., Ma, Y., Yao, X., & Wei, W. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.511 · Cited by 55
Tharakan, S., Khondkar, S., & Ilyas, A. (2021) · Sensors · doi:10.3390/s21227477 · Cited by 60
O'Shea, D. G., Curtin, C. M., & O’Brien, F. J. (2022) · Biomaterials Science · doi:10.1039/d1bm01540k · Cited by 65
Influence of Cross-Linking Conditions on Drying Kinetics of Alginate Hydrogel
Łabowska, M. B., Skrodzka, M., Sicińska, H., Michalak, I., & Detyna, J. D. (2023) · Gels · doi:10.3390/gels9010063 · Cited by 62
Adaptable conductive hydrogel-enabled soft electronics
Liu, Y., Omar, R., Li, G., Zhou, P., Zhang, Y., Yan, W., Haick, H., Guo, C. F., Someya, T., & Wang, Y. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101590 · Cited by 67
Janarthanan, G., Lee, S., & Noh, I. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104441 · Cited by 57
Li, Q., Hatakeyama, M., & Kitaoka, T. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200249 · Cited by 58
Improving printability of a thermoresponsive hydrogel biomaterial ink by nanoclay addition
Hu, C., Hahn, L., Yang, M., Altmann, A., Stahlhut, P., Gröll, J., & Luxenhofer, R. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05190-5 · Cited by 62
“Moreover, high polymer concentrations are considered problematic for cell-laden printing, as it might induce clogging of the nozzle tip and lead to more restrictive environments for the cells (macromolecular crowding) [40–42].”
BackgroundTrends in 3D bioprinting for esophageal tissue repair and reconstruction
Farhat, W., Chatelain, F., Marret, A., Faivre, L., Arakélian, L., Cattan, P., & Fuchs, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120465 · Cited by 59
Sathish, P. B., Gayathri, S., Priyanka, J., Muthusamy, S., Narmadha, R., Krishnakumar, G. S., & Selvakumar, R. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.11.184 · Cited by 56
Hafeez, S., Aldana, A. A., Duimel, H., Ruiter, F. A. A., Decarli, M. C., LaPointe, V. L. S., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2023) · Advanced Materials · doi:10.1002/adma.202207053 · Cited by 57
Characterization of Biocompatibility of Functional Bioinks for 3D Bioprinting
Kim, J. (2023) · Bioengineering · doi:10.3390/bioengineering10040457 · Cited by 62
“However, additional components other than polymeric materials may be incorporated into the bioink product to obtain the desired performance outcomes, such as printability [44].”
BackgroundKhan, M. M. R., Rumon, M. M. H., & Islam, M. (2024) · Processes · doi:10.3390/pr12122880 · Cited by 61
Hsieh, C., Ariga, K., Shrestha, L. K., & Hsu, S. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c00920 · Cited by 53
Afghah, F., İyison, N. B., Nadernezhad, A., Midi, A., Şen, Ö., Okan, B. S., Çulha, M., & Koç, B. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102068 · Cited by 54
Kim, D., Kim, M., Lee, J., & Jang, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.764682 · Cited by 64
“1 Types of Multicomponent Bioinks Typically, multicomponent bioinks are classified into four categories (Chimene et al., 2020; Cui et al., 2020).”
Background3D‐Printed Biocompatible Scaffolds with Built‐In Nanoplasmonic Sensors
García‐Astrain, C., Lenzi, E., de Aberasturi, D. J., Henriksen‐Lacey, M., Binelli, M. R., & Liz‐Marzán, L. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005407 · Cited by 52
Application and Development of Modern 3D Printing Technology in the Field of Orthopedics
Li, B., Zhang, M., Lu, Q., Zhang, B., Miao, Z., Li, L., Zheng, T., & Liu, P. (2022) · BioMed Research International · doi:10.1155/2022/8759060 · Cited by 62
“Traditional hydrogels are randomly cross-linked single-network hydrogels, and increasing the cross-linking density and polymer content to enhance the hydrogel network will inevitably reduce the permeability and porosity required for cell growth, thus a ff ecting the cultivation of the cell [94].”
Li, W., Shi, Z., Jing, H., Dou, Y., Liu, X., Zhang, M., Qiu, Z., Heger, Z., & Li, N. (2025) · Nature Communications · doi:10.1038/s41467-025-59725-y · Cited by 72
“This mechanism ef fi ciently disperses stress across the network and dissipates it by disrupting nanoparticle – polymer crosslinks 39 .”
Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction
Ravoor, J., Thangavel, M., & Elsen S, R. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00949 · Cited by 48
3D printing sacrificial templates for manufacturing hydrogel constructs with channel networks
Pan, B., Shao, L., Jiang, J., Zou, S., Kong, H., Hou, R., Yao, Y., Du, J., & Jin, Y. Q. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111012 · Cited by 56
Current status and prospects of gelatin and its derivatives in oncological applications: Review
Zhang, Y., & Wang, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.133590 · Cited by 60
Kakarla, A. B., Kong, I., Turek, I., Kong, C., & Irving, H. R. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110362 · Cited by 53
Alam, A. M. M. N., Kim, C.-J., Kim, S.-H., Kumari, S., Lee, E.-Y., Hwang, Y.-H., & Joo, S.-T. (2024) · Food Research International · doi:10.1016/j.foodres.2024.114549 · Cited by 70
Chandra, D. K., Reis, R. L., Kundu, S. C., Kumar, A., & Mahapatra, C. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00166 · Cited by 54
Kilian, D., Cometta, S., Bernhardt, A., Taymour, R., Golde, J., Ahlfeld, T., Emmermacher, J., Gelinsky, M., & Lode, A. (2021) · Biofabrication · doi:10.1088/1758-5090/ac457b · Cited by 55
Jeon, O., Lee, Y. B., Lee, S. J., Guliyeva, N., Lee, J., & Alsberg, E. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.025 · Cited by 58
An ultrasound-induced MXene doped PAM–SA super-tough hydrogel
Li, K., Liu, Y., Ge, Y., Cao, H., Zhuang, S., Yang, X., Zhao, Y., & Gu, X. (2023) · Journal of Materials Chemistry C · doi:10.1039/d2tc04665b · Cited by 49
Raza, S., Ghasali, E., Hayat, A., Zhang, P., Orooji, Y., & Lin, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127153 · Cited by 49
Effect of varying cell densities on the rheological properties of the bioink
Majumder, N., Mishra, A., & Ghosh, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00241 · Cited by 52
“The rheology profile of any hydrogel plays a determining role in the flow properties [7], deformation characteristics [8], shape fidelity [9] and thus the overall injectability or printability of the bioink [5,6].”
BackgroundPrint‐and‐Grow within a Novel Support Material for 3D Bioprinting and Post‐Printing Tissue Growth
Machour, M., Hen, N., Goldfracht, I., Safina, D., Davidovich‐Pinhas, M., Bianco‐Peled, H., & Levenberg, S. (2022) · Advanced Science · doi:10.1002/advs.202200882 · Cited by 52
Machine Learning in Gel-Based Additive Manufacturing: From Material Design to Process Optimization
Zhang, Z., Wang, Y., & Wang, W. (2025) · Gels · doi:10.3390/gels11080582 · Cited by 56
“The multifactorial nature of gel additive manufacturing encompasses complex interdependencies between gel properties and printing process, making it challenging to optimize with conventional approaches [88].”
Bakht, S. M., Pardo, A., Gómez‐Florit, M., Reis, R. L., Domingues, R. M. A., & Gomes, M. E. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00717c · Cited by 53
The promising rise of bioprinting in revolutionalizing medical science: Advances and possibilities
Jamee, R., Araf, Y., Naser, I. B., & Promon, S. K. (2021) · Regenerative Therapy · doi:10.1016/j.reth.2021.05.006 · Cited by 49
“More advanced bioinks developed or developing include multi-material bioinks [13], functionalization/dual cross-linking, supramolecular hydrogels, interpenetrating network, nanocomposites, thermoplastic reinforcement [14], self-assembling bioinks, stimuli-responsive bioinks [8], etc.”
BackgroundSaravanou, S.-F., Ioannidis, K., Dimopoulos, A., Paxinou, A., Kounelaki, F., Varsami, S. M., Tsitsilianis, C., Papantoniou, I., & Pasparakis, G. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120790 · Cited by 50
Lu, G., Tang, R., Nie, J., & Zhu, X. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202300661 · Cited by 54
Progress in 3D printing for bone tissue engineering: a review
Lan, W., Huang, X., Huang, D., Wei, X., & Chen, W. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07361-y · Cited by 53
“Materials extrusion or FDM technology, developed and commercialized by Stratasys company in 1989, typically uses thermoplastic polymers as the substrate [56].”
BackgroundInfluentialRobust Hydrogel Adhesion by Harnessing Bioinspired Interfacial Mineralization
Zhang, J. P., Wang, Y., Zhang, J., Lei, I. M., Chen, G., Xue, Y., Liang, X., Wang, D., Wang, G., He, S., et al. (2022) · Small · doi:10.1002/smll.202201796 · Cited by 49
Chu, Y., Huang, L., Zhao, Y., Zhao, T., Zhao, H., Yang, W. J., Xie, X., Qian, L., Chen, Y., & Dai, J. (2021) · Biomedical Materials · doi:10.1088/1748-605x/ac2595 · Cited by 54
“3D bioprinting is an advanced manufacturing technology used for creating tissue engineering scaffolds [7–9].”
A versatile 3D-printable hydrogel for antichondrosarcoma, antibacterial, and tissue repair
Zhu, W., Zhou, Z. Y., Huang, Y., Liu, H., He, N., Zhu, X., Han, X., Zhou, D., Duan, X., Chen, X., et al. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.07.010 · Cited by 45
Bhattacharyya, A., Janarthanan, G., Kim, T., Taheri, S., Shin, J., Kim, J., Bae, H. C., Han, H., & Noh, I. (2022) · Biomaterials Research · doi:10.1186/s40824-022-00301-6 · Cited by 44
“Thus, most of the bioinks used in advanced research are multicomponent or nanocomposite [4, 5].”
BackgroundKasturi, M., Mathur, V., Gadre, M. A., Srinivasan, V., & Vasanthan, K. S. (2023) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-023-00576-3 · Cited by 47
Lu, C., Wang, C., Zhang, D., Wang, J., Yong, Q., & Chu, F. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.06.054 · Cited by 46
Computational Modeling and Experimental Characterization of Extrusion Printing into Suspension Baths
Prendergast, M. E., & Burdick, J. A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101679 · Cited by 49
Design and 3D Printing of Personalized Hybrid and Gradient Structures for Critical Size Bone Defects
Altunbek, M., Afghah, F., Fallah, A., Acar, A. A., & Koç, B. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00107 · Cited by 44
Construction of 3D bioprinting of HAP/collagen scaffold in gelation bath for bone tissue engineering
Chuang, G., Wu, J., Zeng, Y., & Li, H. (2023) · Regenerative Biomaterials · doi:10.1093/rb/rbad067 · Cited by 47
“Similarly, nanoparticle-enhanced hydrogel bio-ink can improve the materials’ printing performance, rheological properties and mechanical properties [33].”
BackgroundChakrapani, G. D., Kumar, V. V., & Zare, M. (2025) · ACS Omega · doi:10.1021/acsomega.5c06034 · Cited by 54
“The mesh size (the distance between polymer molecules in the network) can be adjusted from 5 to 100 nm. 65 Therapeutics can interact with polymer chains on a molecular scale through various methods; a covalent bond is depicted in Figure 4.”
Three-Dimensional Printing Using a Maize Protein: Zein-Based Inks in Biomedical Applications
Negrete, J. A. T., Aceves-Colin, A. E., Rivera-Flores, D. C., Díaz-Armas, G. G., Mertgen, A.-S., Trinidad-Calderón, P. A., Olmos-Cordero, J. M., Gómez-López, E. G., Pérez‐Carrillo, E., Escobedo‐Avellaneda, Z., et al. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00544 · Cited by 48
Regenerating dynamic organs using biomimetic patches
Chansoria, P., Etter, E. L., & Nguyen, J. (2021) · Trends in biotechnology · doi:10.1016/j.tibtech.2021.07.001 · Cited by 45
Advances in the Preparation of Tough Conductive Hydrogels for Flexible Sensors
Ding, H., Liu, J., Shen, X., & Li, H. (2023) · Polymers · doi:10.3390/polym15194001 · Cited by 43
Bioprinting of Cartilaginous Auricular Constructs Utilizing an Enzymatically Crosslinkable Bioink
Fisch, P., Broguière, N., Finkielsztein, S., Linder, T. E., & Zenobi‐Wong, M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008261 · Cited by 45
A multicellular bioprinted cell construct for vascularized bone tissue regeneration
Kim, W.-J., Lee, H., Roh, E. J., An, S. B., Han, I., & Kim, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133882 · Cited by 41
Hao, L., Zhao, S., Hao, S., He, Y., Feng, M., Zhou, K., He, Y., Yang, J., Mao, H., & Gu, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124364 · Cited by 44
Sinad, K. V. G., Ebubechukwu, R. C., & Chu, C. K. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00773a · Cited by 42
Kim, W.-J., Lee, H., Lee, C. K., Kyung, J. W., An, S. B., Han, I., & Kim, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105170 · Cited by 46
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.