Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Items 401–500 of 600
Meng, X., Zhou, Z. Y., Chen, X., Ren, F., Zhu, W., Zhu, S., & Liu, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.768 · Cited by 12
“Bioinks play a key role in 3D bioprinting procedure and its outcome, many of which are capable to solidify and to form a hydrogel structure[7].”
Lee, S.-H., & Choi, J. (2024) · Food Science of Animal Resources · doi:10.5851/kosfa.2023.e81 · Cited by 13
“Like fiber scaffolds, they are supports that form a network structure to allow cells to adhere better to a planar substrate (Chimene et al., 2020).”
BackgroundYang, Q., Guo, J., Zhang, S., Feng, S., Yao, Q., Bao, D., Xu, Y., Guan, F., Zhang, X., & He, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152815 · Cited by 11
Nanocomposite Hydrogel Bioinks for 3D Bioprinting of Tumor Models
Wang, Y., Duan, Y., Yang, B., & Li, Y. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00671 · Cited by 11
Latest progress of self-healing hydrogels in cardiac tissue engineering
Maeso, L., Eufrásio-da-Silva, T., Deveci, E., Dolatshahi‐Pirouz, A., & Orive, G. (2024) · Biomedical Microdevices · doi:10.1007/s10544-024-00716-z · Cited by 11
“…biomaterials and tissue engineering scaffolds, as well as for developing in vitro models for drug testing purposes, aiming to reduce the use of animals in research (Izadifar et al. 2018; Heinrich et al. 2019; Chimene et al. 2020; Fonseca et al. 2020; Lim et al. 2020; Tolabi et al. 2023).”
Ling, G., Ren, J., Wang, Z., Ren, R., & Lv, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113549 · Cited by 11
Composite Hydrogel of Polyacrylamide/Starch/Gelatin as a Novel Amoxicillin Delivery System
Poyraz, Y., Baltacı, N., Hassan, G., Alayoubi, O., Uysal, B. Ö., & Pekcan, Ö. (2024) · Gels · doi:10.3390/gels10100625 · Cited by 13
Chen, X.-D., Zhang, X., Zhu, H., Lu, H. H., & Wang, M. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15120381 · Cited by 11
3D Bioprinting Technology in Tissue Engineering Printing Method and Material Selection
Tao, H., Zhang, X., Yuan, X., Lian, Z., Xu, J., Shan, D., & Guo, B. (2025) · BioNanoScience · doi:10.1007/s12668-025-01816-7 · Cited by 15
Construction of stable niches for denitrifiers using 3D bioprinting for efficient nitrogen removal
Liu, Y., Zhao, T., Wu, Y., Niu, J., Chao, C., & Zhao, Y. (2025) · Water Research · doi:10.1016/j.watres.2025.123916 · Cited by 12
Time-dependent covalent network formation in extrudable hydrogels
Karis, D., & Nelson, A. (2020) · Polymer Chemistry · doi:10.1039/d0py01129k · Cited by 10
Carbajal-Gamboa, G. A., Ostolaza-Saz, A. E., Dueñas-Parapar, D., Casanova, J. L., & Molfino, H. M. G. (2022) · Scientia Agropecuaria · doi:10.17268/sci.agropecu.2022.021 · Cited by 10
“They also mimic the extracellular matrix around cells, provide a favorable environment for cell growth, and enable intercellular interactions and the exchange of biochemical signals (Chimene et al., 2019; Kiyotake et al., 2019; Li et al., 2021; Kamalapuram et al., 2021).”
BackgroundKim, K., Jin, S., & Shin, M. (2023) · Advanced Therapeutics · doi:10.1002/adtp.202300170 · Cited by 10
Motealleh, A., Dorri, P., & Kehr, N. S. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab82ea · Cited by 10
Wang, X., Jiang, J., Yuan, C., Gu, L., Zhang, X., Yao, Y., & Shao, L. (2023) · Biomaterials Science · doi:10.1039/d3bm01489d · Cited by 11
Advanced Biomaterials for 3D Printing via a Synergistic Dual-Photopolymer Design
Bao, Y. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02891 · Cited by 9
Milla, A. E. F., DeMaria, W., Wells, D., Jeon, O., Alsberg, E., & Rolle, M. W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d8f · Cited by 10
“The viability of cells embedded in bioinks has been studied after extrusion, and it was found that cells often exhibit higher survival when the shear stresses are low, which can be aided by bioinks acting as a protective barrier for cells [36, 37].”
Stimulus-assisted in situ bioprinting: advancing direct bench-to-bedside delivery
Hwangbo, H., Koo, Y., Nacionales, F., Kim, J., Chae, S., & Kim, G. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2024.11.001 · Cited by 14
Bidirectional mechanisms and emerging strategies for implantable bioelectronic interfaces
Yan, Z., Gao, W., Duan, Y.-Y., Zhou, H., Ni, C., Huang, L., & Ye, Z. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.06.014 · Cited by 16
“Photopolymerization printing technology can be employed to create high-resolution 3D objects [126 – 129].”
Advances in 3D bioprinting of functional biomaterials for neural tissue engineering
Li, S., Xianyu, M., Zhong, Z., & Li, C. (2025) · Tissue and Cell · doi:10.1016/j.tice.2025.103024 · Cited by 12
Wang, Q., Chen, K., Zhang, Y., Shao, F., Tan, X., Ying, Q., Wang, L., Ren, C., Zhang, L., & Wang, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.010 · Cited by 24
“Therefore, they are not qualified as multi-adaptable bioinks for wide-spreading applications in constructing various types of tissue mimics or engineered scaffolds [8].”
Flexible MXene–hydrogel mechatronics for next-generation energy storage applications: A review
Ashraf, M. A., Wong, K. K. L., Javed, M. S., & Zhang, W. J. C. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104765 · Cited by 18
Multifunctional Poly(acrylic acid)/Chitosan nanoparticle network hydrogels with tunable mechanics
Wei, X., Liu, C., Gu, Z., Luo, K., Yang, J., & Zhang, S. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101696 · Cited by 11
Improving the mechanical properties of 3D printed GelMA composite hydrogels by tannic acid
Zhang, X., Xiong, Y., Wu, W., Jiang, X., Dong, Y., Yang, S., & Gou, M. (2023) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.51 · Cited by 9
Jang, C. H., Kim, W.-J., Moon, C., & Kim, G. (2021) · IEEE Transactions on NanoBioscience · doi:10.1109/tnb.2021.3085599 · Cited by 11
Zhao, T., Chen, L., Yu, C., He, G., Lin, H., Sang, H., Chen, Z., Hong, Y., Sui, W., & Zhao, J. (2024) · RSC Advances · doi:10.1039/d3ra05046g · Cited by 8
Kong, Y., Lu, Z., Zhan, J., Zhou, X. Y., Chen, S., Chen, Q., Gong, H., Zhang, X., Mao, X., Wang, Y., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101516 · Cited by 8
“Gravity presents a significant challenge in high resolution and fidelity when printing intricate 3D structures in air using low-viscosity fluid materials [29].”
3D-Printed Dual-Lineage Inductive Approach for Efficient Osteochondral Regeneration
Ouyang, X., Li, R., Sun, W., Gu, Y., Lin, J., Zhang, F., Yao, X., Gu, H., Xie, C., Li, W., et al. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c14063 · Cited by 8
Interspecies interactions in dual, fibrous gels enable control of gel structure and rheology
Mugnai, M. L., Batoum, R. T., & Gado, E. D. (2025) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2423293122 · Cited by 15
Tang, S., Lu, X., Geng, P., Chen, D., Shi, Y., Su, J. D., Zhou, Y., Su, B., & Wen, S. (2022) · Materials Advances · doi:10.1039/d2ma00927g · Cited by 8
UV assisted photo reactive polyether‐polyesteramide resin for future applications in 3D printing
Macías, S. I., Ruano, G., Borràs, N., Alemán, C., & Armelin, E. A. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210626 · Cited by 8
Duan, J., Lin, T., Liu, H., Jing, X., & Shao, H. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.01.160 · Cited by 9
Bow, A. J., Masi, T. J., & Dhar, M. S. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13122146 · Cited by 8
“Hydrogels represent a broad category of hydratable materials that are capable of setting, in either a permanent or reversible reaction, to a solid or semi-solid form [25,26].”
BackgroundHafezi, M., Khorasani, S. N., Khalili, S., Sattari‐Najafabadi, M., Najarzadegan, M., & Neisiany, R. E. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.113761 · Cited by 7
Challenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels
Qiu, J., Ma, S., & Qu, X. (2025) · Nano Select · doi:10.1002/nano.202400149 · Cited by 9
“ICE hydrogels are formed by ionically cross-linked rigid polymers and covalently cross-linked elastic polymers [107].”
Utilising design of experiment to design an optimised bioink for 3D bioprinting
Upton, A. M. C., Mylona, A., & Zimbitas, G. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11076-1 · Cited by 7
“Bioinks must possess several key characteristics to effectively mimic the native extracellular matrix of the target tissue [7], including biocompatibility [ 8], printability [ 9 ], bioactivity [10], and mechanical properties tailored to the specific tissue type and applications [11, 12].”
Zhang, C., Lei, Z., & Liu, Y. Y. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114138 · Cited by 7
Recovery of cellulose from biomass waste for 3D printing of slow-release hydrogel scaffolds
Hu, H., Li, P., Li, J., Tong, Y. W., & He, Y. (2025) · Environmental Research · doi:10.1016/j.envres.2025.122609 · Cited by 8
Ribbon-shaped microgels as bioinks for 3D bioprinting of anisotropic tissue structures
Lee, H. P., Tai, M., Jones, S., Tong, X., Kim, S. S., Jansman, M. M. T., Tam, T., Du, J., Skylar‐Scott, M. A., & Yang, F. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.12.040 · Cited by 8
“There remains a need for granular microgels that not only exhibit excellent bioink properties, but also support forming macroporous scaffolds with mechanical properties suitable for regenerating load-bearing tissues [54,55].”
Versatile and Extendable Boronate-Based Tunable Hydrogel Networks for Patterning Applications
Tan, R. P. T., Cheng, J. J. W., Parikh, B. H., Wong, J. H. M., Soh, B. W., Chang, J. J., Tran, K. C., Lee, Y., Chee, P. L., Boo, Y. J., et al. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00614 · Cited by 7
Singh, I., Kong, I., Viswakarma, A., & Balani, K. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.02.263 · Cited by 9
Motealleh, A., Dorri, P., Czieborowski, M., Philipp, B., & Kehr, N. S. (2021) · Biomedical Materials · doi:10.1088/1748-605x/abd872 · Cited by 7
Leveraging synthesis-swelling relationship to precisely engineer synthetic hydrogels
Kuang, X., & Zhang, Y. S. (2021) · Matter · doi:10.1016/j.matt.2021.07.006 · Cited by 7
Facile Cell-Friendly Hollow-Core Fiber Diffusion-Limited Photofabrication
Savelyev, A. G., Sochilina, A. V., Akasov, R., Mironov, A. V., Kapitannikova, A. Y., Borodina, T. N., Sholina, N. V., Khaydukov, K. V., Zvyagin, A. V., Generalova, A. N., et al. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.783834 · Cited by 8
“For instance, high viscosity of the bioink on the base of HAGM (dynamic viscosity >90,000 mPa•s) improved its printability (Chimene et al., 2020).”
BackgroundFuture of nanotechnology in tissue engineering
Vijayan, V. M., Hernandez‐Moreno, G., & Thomas, V. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824064-9.00003-4 · Cited by 8
Li, M., Shi, T., Yao, D., Yue, X., Wang, H., & Liu, K. (2022) · Scientific Reports · doi:10.1038/s41598-022-10338-1 · Cited by 8
Mir, T. A., Nakamura, M. M., Sakai, S., Iwanaga, S., Wani, S. I., Alzhrani, A., Arai, K., Mir, B. A., Kazmi, S., Assiri, A. M., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.714 · Cited by 8
“Therefore, when performing decellularization treatments, it is essential to recognize that one protocol may not yield effective results for all tissue types[136-149].”
BackgroundRaja, I. S., Kim, B., & Han, D. (2024) · Bioengineering · doi:10.3390/bioengineering11040363 · Cited by 6
“…to develop nanocomposite-based printable inks can be nanoparticles, nanofibers, nanoclays, etc., which require a compromise between printability and biocompatibility [7–10]. nanoparticles, nano fi bers, nanoclays, etc., which require a compromise between print-ability and biocompatibility [7–10].”
BackgroundWu, D., Zhu, D., Zhou, X., Li, G., Zhang, X., Ma, L., Liang, H., Tong, B., Lei, J., Wang, H., et al. (2026) · ACS Nano · doi:10.1021/acsnano.5c14391 · Cited by 8
3D bioprinting: current status and future prospects in tissue and organ regeneration
Selvakumar, M., Dhanasekar, J., Nandhakumaran, S., & Sudhamani, T. (2026) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-026-00982-z · Cited by 8
Liu, J., & Xu, C. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.05.029 · Cited by 6
Torchio, A., Boffito, M., Laurano, R., Cassino, C., Lavella, M., & Ciardelli, G. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00092g · Cited by 7
Inorganic/Biopolymers Hybrid Hydrogels Dual Cross-Linked for Bone Tissue Regeneration
Cernencu, A. I., Dinu, A. I., Dinescu, S., Trusca, R. D., Istodorescu, M., Lungu, A., Stancu, I., & Iovu, H. (2022) · Gels · doi:10.3390/gels8120762 · Cited by 6
“The reinforcement effect is probably induced by the dispersion and dissipation of stress across the polymeric matrix due to the interactions between the macromolecular chains and nanosized materials [54,61,62].”
BackgroundRezvan, G., Esmaeili, M., Sadati, M., & Taheri‐Qazvini, N. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.07.039 · Cited by 6
Nawaz, A., Ahmad, Z., Taj, M. B., Ihsan, A., & Tasleem, M. (2025) · Materials Research Bulletin · doi:10.1016/j.materresbull.2025.113930 · Cited by 6
Neuhäusler, A., Lindner, N., & Blaeser, A. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.102799 · Cited by 7
“Different approaches arose to overcome these drawbacks: dual crosslinking, supramolecular hydrogels or thermoplastic scaffolding [8].”
Neto, L. A. A., & Silva, L. P. (2024) · Polymer Bulletin · doi:10.1007/s00289-023-05133-5 · Cited by 5
Asciak, L., Domingo-Roca, R., Dow, J. R., Brodie, R., Paterson, N., Riches, P. E., Shu, W., & McCormick, C. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106531 · Cited by 5
3D-Bioprinted Hepar-on-a-Chip Implanted in Graphene-Based Plasmonic Sensors
Wang, Y., Ma, D., Zhang, Q., Qian, W., Liang, D., Shen, J., Pan, X., Wang, C., Sheng, E., & Zhu, D. (2024) · ACS Sensors · doi:10.1021/acssensors.4c00833 · Cited by 7
Downstream Processes for Cultivated Meat
de Carvalho, J. C., Karp, S. G., Goyzueta-Mamani, L. D., Biagini, G., Costa, G. D. S., Herrmann, L. W., & Soccol, C. R. (2024) · Springer eBooks · doi:10.1007/978-3-031-55968-6_8 · Cited by 6
Deciphering the focuses and trends in skin regeneration research through bibliometric analyses
Zhou, J. P., Dong, C., Shu, Q., Chen, Y., Wáng, Q., Wang, D., & M., G. (2022) · Frontiers in Medicine · doi:10.3389/fmed.2022.947649 · Cited by 6
Thermal Conductivity of a Porous Material with an Ordered Structure
Bragin, D. M., Popov, A. I., Eremin, A. V., Olatuyi, O. J., Zinina, S. A., & Shulga, A. S. (2022) · International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency (SUMMA) · doi:10.1109/summa57301.2022.9973913 · Cited by 5
“This is justified by actively developing technologies of additive manufacturing [7-9,13].”
BackgroundInfluentialHybrid hydrogels for bioink development and potential use in dental tissue engineering
Prebeg, T., Kačarević, Ž. P., & Matijašić, G. (2023) · International Journal of Dental Biomaterials Research · doi:10.56939/dbr23122p · Cited by 5
Stretchable and tough polystyrene hydrogels by introducing polyacrylamide network
Wang, R.-X., Jiang, Z.-Y., Yang, F., Lei, Y., & Sheng, J. (2024) · The European Physical Journal Plus · doi:10.1140/epjp/s13360-023-04817-1 · Cited by 5
3D-printed self-healing, biodegradable materials and their applications
Li, Y., Ma, G., Guo, F., Luo, C., Wu, H., Luo, X., Zhang, M., Wang, C., Jin, Q., & Yu, L. (2024) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-024-0787-1 · Cited by 6
Direct Ink Writing of Rigid Microparticles
Pradal, P., Kim, J. B., Nam, S. K., Kim, S., & Amstad, E. (2024) · Small · doi:10.1002/smll.202405675 · Cited by 5
3D Bioprinting: Shaping the Future of Periodontal Tissue Regeneration and Disease Management
Acharya, J. R., Kumar, S., Girdhar, G. A., Patel, S., Parekh, N. H., Patadiya, H. H., Zinjala, A. N., & Haque, M. (2025) · Cureus · doi:10.7759/cureus.82432 · Cited by 13
“Hydrogels derived from extracellular matrix components like collagen and hyaluronic acid create this environment and promote stem cell growth [43].”
Structured Data Storage for Data-Driven Process Optimisation in Bioprinting
Schmieg, B., Brandt, N., Schnepp, V. J., Radosevic, L., Gretzinger, S., Selzer, M. A., & Hubbuch, J. J. (2022) · Applied Sciences · doi:10.3390/app12157728 · Cited by 6
“Printer hardware and software Resolution of printers [55], position effects on printing platform, availability of settings/addons such as temperature control jackets, flow settings [16,21,56] Different printing outcome [57,58] Transfer by user according to process window of SOP”
MethodAsymmetric fluid flow in helical pipes inspired by shark intestines
Levin, I., Sadaba, N., Nelson, A., & Keller, S. L. (2024) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2406481121 · Cited by 4
“Given that the field of 3D printing is quickly evolving [26], softer materials like hydrogels may soon be widely available [27, 28].”
BackgroundZhou, Q., Chen, S., Fan, X., Li, Y., Guo, X., Zhou, C., Bao, C., & Jin, M. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c01489 · Cited by 3
Zhu, Y., Zhu, C., Tang, Y., Jia, Y., Liu, Y., Chen, X., Guo, C., Li, H., Zhai, Y., & Fan, L. (2025) · iScience · doi:10.1016/j.isci.2025.114061 · Cited by 4
Biocompatible Self-Healing Hydrogel for VAT 3D Printing
D’Aloia, M., Baruffaldi, D., Dirè, S., Callone, E., Angelini, A., Pirri, C. F., Roppolo, I., & Frascella, F. (2026) · ACS Materials Au · doi:10.1021/acsmaterialsau.5c00194 · Cited by 5
Patel, P. S., Pandey, G., Kumar, A., Misra, S. K., Roy, S., Awasthi, D. A., Wagh, S. S., Srivastava, S., & Kapoor, A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00671-8 · Cited by 8
Seaweed-derived green hydrogels: advances, biomedical applications, and future perspectives-a review
Vijayakumar, D. (2026) · Polymer Bulletin · doi:10.1007/s00289-026-06378-6 · Cited by 4
Grottkau, B. E., Hui, Z., & Pang, Y. (2024) · Small · doi:10.1002/smll.202308694 · Cited by 6
Silicon-Enriched Poly(vinyl alcohol)/Gelatin Hydrogels for 3D Printed Inks
Rios, K. S. C., Soria-Hernández, C. G., Ramírez-Cedillo, E., Rocha-Pizaña, M. D. R., Gómez-Maldonado, J., & Ortega-Lara, W. D. L. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00568 · Cited by 4
Boost and Contraction of Flow by Herringbone Surface Design on the Microfluidic Channel Wall
Filippi, D., Derzsi, L., Nalin, F., Vezzani, A., Ferraro, D., Zaltron, A., Mistura, G., & Pierno, M. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201748 · Cited by 4
Dewan, M. (2023) · Asian Journal of Chemistry · doi:10.14233/ajchem.2023.28189 · Cited by 4
Nanomaterials: A novel approach for airborne hydrocarbon contaminant detection
Emmanuel, M., Makangara, J. J., & Karungamye, P. (2024) · Next research. · doi:10.1016/j.nexres.2024.100092 · Cited by 4
Uncertainty quantification of effective mechanical characteristics of hexagonal cellular material
Iqbal, S., Kamiński, M., & Ardakani, S. M. S. (2025) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2025.104368 · Cited by 4
Conductive/Insulating Bioinks with Multitechnology Compatibility and Adjustable Performance
Yang, X., Zhong, Y., Zhang, L., Liu, Y., Zhuo, F., Wang, J., Ge, L., Zhang, L., Zeng, X., Tan, W., et al. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00631 · Cited by 5
Biofabrication using maize protein: 3D printing using zein formulationsPreprint
Negrete, J. A. T., Aceves-Colin, A. E., Rivera-Flores, D. C., Díaz-Armas, G. G., Mertgen, A.-S., Trinidad-Calderón, P. A., Olmos-Cordero, J. M., Gómez-López, E. G., Pérez‐Carrillo, E., Escobedo-Avellaneda, Z. J., et al. (2020) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2020.07.29.227744 · Cited by 4
“processing [45–47].”
Biomechanical and Biological Performances of Diels-Alder Crosslinked Thermogelling BioinkPreprint
Hahn, L., Beudert, M., Gutmann, M., Keßler, L., Stahlhut, P., Fischer, L., Lorson, T., Thievessen, I., Lühmann, T. C., & Luxenhofer, R. (2021) · ChemRxiv · doi:10.26434/chemrxiv.14184713 · Cited by 4
Bioinks used in the repair of nerve injury in vivo
Wang, L., Zhou, X., Wang, S., Wen, F., Ullah, I., Zhang, W., Gao, X., Song, B., You, Z., & Li, H. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101643 · Cited by 3
Theranostic platforms for skin tissue engineering: Bridging healing and real-time monitoring
Maeso, L., Nadimifar, M., Biswas, S., Roy, S., Gaharwar, A. K., Dolatshahi‐Pirouz, A., & Orive, G. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.214724 · Cited by 3
Self-citationNath, R., Nag, M., Chakraborty, S., Pandit, S., Lahiri, D., Sen, R., Biswas, B., Gill, H. S., Rajeev, M., Sharma, S., et al. (2026) · Next research. · doi:10.1016/j.nexres.2026.101672 · Cited by 3
Sousa, V., Sobreiro‐Almeida, R., van den Bersselaar, B. W. L., Meijer, E. W., Vantomme, G., Borges, J., & Mano, J. F. (2026) · Advanced Materials · doi:10.1002/adma.202521259 · Cited by 3
“These values corroborate those previously reported for other supramolecular inks [129, 130].”
Pianou, M. E., Mîrț, A. L., Rigano, V., Verné, E., Baino, F., & Boccaccini, A. R. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.05.010 · Cited by 5
Liu, S., Luo, S., Sun, Q., Cong, J., Yan, S., & Guo, J. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.188846 · Cited by 3
Engineering Dynamic 3D Models of Lung
Blomberg, R., Hewawasam, R. S., Šerbedžija, P., Saleh, K. S., Caracena, T., & Magin, C. M. (2023) · Advances in experimental medicine and biology · doi:10.1007/978-3-031-26625-6_9 · Cited by 5
Evaluation of thermoresponsive biopolymers-based composite bioinks for cartilage engineering
Gu, Y., Zhang, G., Pigeot, S., Qian, Y. H., Butelmann, T., Martín, I., Barbero, A., & Shastri, V. P. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114261 · Cited by 3
Advanced Bioink Materials for Tissue Engineering Applications
Chauhan, N., Saxena, K., Rawal, R., & Jain, U. (2024) · Current Tissue Microenvironment Reports · doi:10.1007/s43152-023-00050-1 · Cited by 3
Overview of Injectable Hydrogels for 3D Bioprinting and Tissue Regeneration
Janarthanan, G., & Noh, I. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839163975-00001 · Cited by 5
Thermo/β-cyclodextrin-responsive ferrocenyl hydrogels constructed by ROMP reaction
Fan, X., Liu, X., Liu, F., & Gu, H. (2023) · Polymer · doi:10.1016/j.polymer.2023.125671 · Cited by 4
Overview of scaffolds processing technologies
D’Amora, U., Ronca, A., Raucci, M. G., & Ambrosio, L. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820508-2.00002-7 · Cited by 4
Biomaterial in Microencapsulation: How Microencapsulation is Changing the Medicine World
Pezhman, A. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1005202 · Cited by 2
Khanshan, A., Mohammadpour, Z., & Kharaziha, M. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.145204 · Cited by 3
Dasgupta, S., Adhikari, J., Das, P., Sarkar, S., Datta, P., Chowdhury, A. R., & Barui, A. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c00278 · Cited by 2
Kim, W.-J., Lee, S. C., Lee, H., Moon, Y. S., Lee, Y., Kwon, D. R., & Kim, G. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202504150 · Cited by 4
3D Bioprinting Enzyme-Bacteria Symbionts for Lactic Acid Production from Cellulose Bioconversion
Li, K.-W., Luo, M.-J., Wang, Y., Liu, X., Liu, M., Wang, X., Shen, J., & Mu, Y. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c08210 · Cited by 2
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.