Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Items 301–400 of 600
Importance of nanocomposites in 3D bioprinting: An overview
Gomathi, K., Sendilvelan, S., & Mohana Priya, R. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00280 · Cited by 32
Tailoring biomaterials for biomimetic organs-on-chips
Sun, L., Bian, F., Xu, D., Luo, Y., Wang, Y., & Zhao, Y. (2023) · Materials Horizons · doi:10.1039/d3mh00755c · Cited by 27
Structure and applications of PIC-based polymers and hydrogels
Liu, K., Vandaele, J., Yuan, H., Blank, K. G., Hammink, R., Kouwer, P. H. J., & Rocha, S. (2024) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2024.101834 · Cited by 29
Fatima, R., & Almeida, B. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00716f · Cited by 25
A review of 3D bioprinting for organoids
Li, Z., Chen, L., Wu, J., Chen, Y., Zhu, Y. Z., Li, G., Xie, G., Tang, G., & Xie, M. (2025) · Medical Review · doi:10.1515/mr-2024-0089 · Cited by 35
“(Bio)ink, composed of biocompatible materials and/or cells, serves as an engineered raw material for bioprinting [48].”
Kumar, P., Sharma, J., Kumar, R., Najser, J., Frantík, J., Manuja, A., Sunnam, N., & Praveenkumar, S. (2025) · Biomaterials Science · doi:10.1039/d4bm01606h · Cited by 28
3D Printing of Solvent-Free Supramolecular Polymers
Rupp, H., & Binder, W. H. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.771974 · Cited by 24
Liu, Y., Ruan, X., Li, J., Wang, B., Chen, J., Wang, X., Wang, P., & Tu, X. (2022) · Cells · doi:10.3390/cells11050831 · Cited by 23
“In order to further improve the bioactivity of bone grafts, biological components, primarily growth factors such as BMP, VEGF, etc., have been successfully combined with various biomaterials to fabricate bone implants [15,16].”
BackgroundInfluentialKangarshahi, B. M., Naghib, S. M., Kangarshahi, G. M., & Mozafari, M. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00335 · Cited by 23
Shi, M., Ya, L., Zhang, C., Li, N., Li, Y., Shi, X., Qin, Z., & Jiao, T. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.139297 · Cited by 22
Yu, S., Wu, T., Xu, K., Liu, R.-Y., Yu, T., Wang, Z., & Zhang, Z. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101740 · Cited by 28
“However, its limited mechanical strength and lack of osteogenic activity necessitate modifications to render it a suitable bioink for bone regeneration application [19].”
Park, J., Oh, Y., Jeong, S., Song, H.-W., Choi, E., & Kim, H. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c02577 · Cited by 22
3D Bioprinting Models for Glioblastoma: From Scaffold Design to Therapeutic Application
Branco, F., Cunha, J., Mendes, M., Sousa, J., & Vitorino, C. (2025) · Advanced Materials · doi:10.1002/adma.202501994 · Cited by 28
Ross, M. T., Kilian, D., Lode, A., Ren, J., Allenby, M. C., Gelinsky, M., & Woodruff, M. A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00158 · Cited by 21
Building a better bone: The synergy of 2D nanomaterials and 3D printing for bone tissue engineering
Li, N., Cui, J., Chi, M., Thieringer, F. M., & Sharma, N. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112362 · Cited by 24
Bedir, T., Baykara, D., Yıldırım, R., Koyuncu, A. C. Ç., Şahin, A., Kaya, E., Tinaz, G. B., İnsel, M. A., Topuzoğulları, M., Gündüz, O., et al. (2024) · Nanomaterials · doi:10.3390/nano14070563 · Cited by 27
“Photoreactive biomaterials including silk fibroin methacrylate (SilMA) [18], hyaluronic acid methacrylate (HAMA) [19], and poly (ethylene glycol) diacrylate (PEGDA) [20] are extensively employed; gelatin methacryloyl (GelMA) is the most prevalent ink choice used for light-based 3D bioprinting [21].”
Method3D bioprinting approaches for spinal cord injury repair
Jiu, J., Liu, H., Li, D., Li, J., Liu, L., Yang, W., Yan, L., Li, S., Zhang, J., Li, X., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad3a13 · Cited by 25
“Compared with traditional material removal, cutting, and other top–down methods known as sub-tractive manufacturing, 3D bioprinting allows for the bottom–up assembly of bioactive materials, cells, biomolecules, and other components in three-dimensional space [41].”
Engineering biomaterials by inkjet printing of hydrogels with functional particulates
Cheng, C., Williamson, E. J., Chiu, G. T. ‐., & Han, B. (2024) · Med-X · doi:10.1007/s44258-024-00024-4 · Cited by 25
“Factors like biodegradation, swelling, chemical binding, and physical entrapment can significantly impact the properties of the ink [25, 33].”
BackgroundAdvanced tumor organoid bioprinting strategy for oncology research
Cui, X., Jiao, J., Yang, L., Wang, Y., Jiang, W., Yu, T., Li, M., Zhang, H., Chao, B., Wang, Z., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101198 · Cited by 35
Johari, N., Adabavazeh, Z., & Baino, F. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00419 · Cited by 27
Motealleh, A., Kart, D., Czieborowski, M., & Kehr, N. S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c13392 · Cited by 20
3D bioprinting of hydrogel/ceramic composites with hierarchical porosity
Mainardi, J. C., Demarchi, C. B., Mirdrikvand, M., Karim, M. N., Dreher, W., Rezwan, K., & Maas, M. (2022) · Journal of Materials Science · doi:10.1007/s10853-021-06829-7 · Cited by 22
Same, S., Navidi, G., Samee, G., Abedi, F., Aghazadeh, M., Milani, M., Akbarzadeh, A., & Davaran, S. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac94ad · Cited by 20
Merotto, E., Pavan, P. G., & Piccoli, M. (2023) · Biomedicines · doi:10.3390/biomedicines11061742 · Cited by 21
“However, increased polymer content, dense crosslinks or altering agents can interfere with cell viability by reducing the permeability and porosity of the material [146].”
Background3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity
Abaci, A., & Güvendiren, M. (2024) · Biofabrication · doi:10.1088/1758-5090/ad52f1 · Cited by 24
2D Nanosilicate for additive manufacturing: Rheological modifier, sacrificial ink and support bath
Rajput, S., Deo, K. A., Mathur, T., Lokhande, G. K., Singh, K. A., Sun, Y., Alge, D. L., Jain, A., Sarkar, T. R., & Gaharwar, A. K. (2022) · Bioprinting · doi:10.1016/j.bprint.2021.e00187 · Cited by 21
Self-citationEstablishing a novel 3D printing bioinks system with recombinant human collagen
Wang, Z., Yang, Y., Gao, Y., Xu, Z., Yang, S., & Jin, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.05.088 · Cited by 20
Dai, L., Dai, N., Chen, T., Kang, L.-Y., & Hsu, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00237 · Cited by 20
Smart alginate inks for tissue engineering applications
Keshavarz, M., Jahanshahi, M., Hasany, M., Kadumudi, F. B., Mehrali, M., Shahbazi, M., Alizadeh, P., Orive, G., & Dolatshahi‐Pirouz, A. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100829 · Cited by 34
“Cell adhesive peptides can be considered a potential route to improve tissue regeneration [83,97].”
BackgroundInfluentialLight‐Assisted 3D‐Printed Hydrogels for Antibacterial Applications
Zhang, L., Nasar, N. K. A., Huang, X., Hu, C., Pang, X., Chen, X., Qiao, R., & Davis, T. P. (2024) · Small Science · doi:10.1002/smsc.202400097 · Cited by 21
Kim, S. H., Kwon, J. S., Cho, J., Park, K. G., Lim, T. H., Kim, M. S., Choi, H. S., Park, C. H., & Lee, S. J. (2021) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10216 · Cited by 21
Tools for manipulation and positioning of microtissues
Vuille-dit-Bille, E., Deshmukh, D., Connolly, S. A., Heub, S., Pasche, S., Dual, J., Tibbitt, M. W., & Weder, G. (2022) · Lab on a Chip · doi:10.1039/d2lc00559j · Cited by 20
Zhou, K., Ding, R., Tao, X., Cui, Y., Yang, J., Mao, H., & Gu, Z. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.08.008 · Cited by 20
Gil, C. J., Evans, C. J., Li, L., Allphin, A. J., Tomov, M. L., Jin, L., Vargas, M., Hwang, B., Wang, J., Putaturo, V. R., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202302271 · Cited by 22
Advanced 3D Printing Strategies for the Controlled Delivery of Growth Factors
Poerio, A., Mano, J. F., & Cleymand, F. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00873 · Cited by 22
Liu, S., Chen, Y., Wang, Z., Liu, M., Zhao, Y., Tan, Y., Qu, Z., Du, L., & Wu, C. (2024) · MedComm · doi:10.1002/mco2.753 · Cited by 26
“49 Other bioink materials, such as decellularized extracellular matrix 50 and synthetic polymers including agarose, 51 poly(ethylene glycol) 52 and polyurethane, 53 are also being explored for their ability to mimic the native tissue microenvironment.”
BackgroundShokrollahi, P., Garg, P., Wulff, D., Hui, A., Phan, C., & Jones, L. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124999 · Cited by 21
Automated Image Analysis Methodologies to Compute Bioink Printability
Uzun‐Per, M., Gillispie, G. J., Tavolara, T. E., Yoo, J. J., Atala, A., Gürcan, M. N., Lee, S. J., & Niazi, M. K. K. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000900 · Cited by 19
Zhao, W., Hu, C., Xu, T., Lin, S., Wang, Z., & Zhu, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207496 · Cited by 19
Kilian, D., Kilian, W., Troia, A., Nguyen, T.-D., Ittermann, B., Zilberti, L., & Gelinsky, M. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12872 · Cited by 21
Hydrogels for Chemical Sensing and Biosensing
Li, H., Dai, C., & Hu, Y. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300474 · Cited by 25
Polysaccharide hydrogels for diabetic wounds: Reasonable customization and regulatory mechanisms
Li, H., Wang, Y., Guo, L., Huang, L., Li, X., & Gao, W. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.154143 · Cited by 24
Hasany, M., Kohestanian, M., Rezaei, B., Keller, S. S., & Mehrali, M. (2024) · ACS Nano · doi:10.1021/acsnano.4c08687 · Cited by 17
Nanoengineered Light‐Activatable Polybubbles for On‐Demand Therapeutic Delivery
Kumar, S. A., Good, J., Hendrix, D., Yoo, E., Kim, D., Deo, K. A., Jhan, Y., Gaharwar, A. K., & Bishop, C. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003579 · Cited by 16
Self-citationA dual-layer cell-laden tubular scaffold for bile duct regeneration
Yan, J., Liu, X., Liu, J., Zhang, X., Zheng, Q., Nan, J., Lin, M. M., Pan, H., Wang, Y., Cai, X., et al. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110229 · Cited by 17
3D-Printed Biomaterials in Biomedical Application
Rokaya, D., Kongkiatkamon, S., Heboyan, A. G., Dam, V. V., Amornvit, P., Khurshid, Z., Srimaneepong, V., & Zafar, M. S. (2022) · Springer eBooks · doi:10.1007/978-981-16-7152-4_12 · Cited by 28
Designing Cost-Effective Open-Source Multihead 3D Bioprinters
Chimene, D., Deo, K. A., Thomas, J. L., Dahle, L., Mandrona, C., & Gaharwar, A. K. (2022) · GEN Biotechnology · doi:10.1089/genbio.2022.0021 · Cited by 19
“…complex rheological properties are commonly seen in newer advanced bioinks, where these flow properties are exploited to improve print performance 3,26 We demonstrate our bioprinters’ practical utility by using them for 3D bioprinting tests incorporating murine preosteo-blast cells into an…”
Self-citationKharaghani, D., Kaffashsaei, E., Haider, M. K., & Kim, I. S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24119464 · Cited by 18
“Sadly, most hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked network and lack of energy dissipation mechanisms [18].”
BackgroundComperat, L., Chagot, L., Massot, S., Stachowicz, M., Dusserre, N., Medina, C. F., Désigaux, T., Dupuy, J., Fricain, J., & Oliveira, H. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303370 · Cited by 18
Enoch, K., & Somasundaram, A. A. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.132890 · Cited by 16
Insertable Biosensors: Combining Implanted Sensing Materials with Wearable Monitors
Chimene, D., Queener, K. M. K., Ko, B. S., McShane, M. J., & Daniele, M. A.-A. (2024) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-110222-101045 · Cited by 21
Self-citationModular and Photoreversible Polymer–Nanoparticle Hydrogels via Host–Guest Interactions
Bernhard, S., Ritter, L., Müller, M., Guo, W., Guzzi, E. A., Bovone, G., & Tibbitt, M. W. (2024) · Small · doi:10.1002/smll.202401870 · Cited by 16
Sun, M., Cheng, J., Zhang, J., Wu, N., Zhao, F., Li, Z., Yu, H., Duan, X., Fu, X., Hu, X., et al. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00368 · Cited by 17
Stereotactic technology for 3D bioprinting: from the perspective of robot mechanism
Tan, B., Kuang, S., Li, X., Cheng, X., Duan, W., Zhang, J., Liu, W., & Fan, Y. (2021) · Biofabrication · doi:10.1088/1758-5090/ac1846 · Cited by 19
“One of the most promising technologies enabling novel treatments of tissue defect or dysfunctions is three-dimensional (3D) bioprinting, which vertically stacks biomaterials or cells layer-by-layer into tissue-like constructs based on a computer-aided designed (CAD) tissue model [1, 2].”
3D printing of hydrogel nanocomposites: A symbiotic union for advanced biomedical applications
Rajabifar, N., Alemi, M. H., Rostami, A., Zarrintaj, P., Zare, Y., Munir, M. T., Shahrousvand, M., Rhee, K. Y., & Nazockdast, H. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103602 · Cited by 17
Multifunctional Hydrogel Materials for Advanced Neural Interfaces
Ma, C., Li, W., Gao, C. C., Li, X., She, J., Zou, Z., Zhang, D., Jin, Y., Xu, C., Liu, B., et al. (2025) · Small Methods · doi:10.1002/smtd.202501134 · Cited by 18
Asohan, A. W., Hashim, R., Ishak, K. M. K., Hamid, Z. A. A., Jasme, N., & Bustami, Y. (2022) · Applied Sciences · doi:10.3390/app12020771 · Cited by 16
Xu, P., Zhu, L., Zhao, Z., Yang, Z., Ning, J., Xue, P., & Lü, H. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107890 · Cited by 15
Progress in SARS-CoV-2, diagnostic and clinical treatment of COVID-19
Li, Y., Lu, S.-M., Wang, J.-L., Yao, H., & Liang, L. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e33179 · Cited by 15
“In the process of coronavirus expression varying multiple proteins, the main chymotrypsin-like protease (M pro , also known as 3C-like Proteinase, 3CL pro ) and papain-like protease (PL pro ) process the virus, and the multi-protein translation of RNA is very important [19,20].”
BackgroundMusilová, L., Achbergerová, E., Vítková, L., Kolařík, R., Martínková, M., Minařík, A., Mráček, A., Humpolíček, P., & Pěcha, J. (2022) · Polymers · doi:10.3390/polym14030391 · Cited by 15
Magnetic resonance imaging as a tool for quality control in extrusion‐based bioprinting
Schmieg, B., Gretzinger, S., Schuhmann, S., Guthausen, G., & Hubbuch, J. J. (2022) · Biotechnology Journal · doi:10.1002/biot.202100336 · Cited by 15
“[19] This is critical in the case of bioprinted scaffolds, where macroscopic scaffold structure fidelity and aspects on a smaller scale, for example internal porosity, are of interest.[20,21] Long analysis durations caused by image stitching”
BackgroundYang, W. S., Kim, W. J., Ahn, J. Y., Lee, J., Ko, D. W., Park, S., Kim, J. Y., Jang, C. H., Lim, J. M., & Kim, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13905 · Cited by 15
Hydrogels for additive manufacturing in scaffolding applications: A review
Ranjan, N., Singh, M., Singh, D., & Kumar, R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-86011-6.00009-x · Cited by 22
Ya, R., Kong, W., Liu, Y., Yang, X., Xu, X., Qiang, L., Mi, X., Zhang, C., Niu, H., Wang, C., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300292 · Cited by 15
Zhao, F., Qiu, Y., Liu, W., Zhang, Y., Liu, J., Bian, L., & Shao, L. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303532 · Cited by 16
Fan, M., Choi, Y., Wedamulla, N. E., Kim, S.-H., Bae, S. M., Yang, D., Kang, H., Tang, Y., Moon, S.-H., & Kim, E. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24915 · Cited by 14
Recent Advances in Functional Hydrogel for Repair of Abdominal Wall Defects: A Review
Liu, Y., Huang, J., Li, S., Li, Z., Chen, C., Qu, G., Chen, K., Teng, Y., Ma, R., Ren, J., et al. (2024) · Biomaterials Research · doi:10.34133/bmr.0031 · Cited by 17
“The mechanical properties of hydrogels depend mainly on their composition, cross-linking concentration, cross-linking technique, and polymer concentration [90–92].”
Jafari, T., Naghib, S. M., Rahmanian, M., & Mozafari, M. R. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00353 · Cited by 14
3D‐Bioprinting for Precision Microtissue Engineering: Advances, Applications, and Prospects
Liu, J., Wang, Q., Le, Y., Hu, M., Chen, L., An, N., Song, Q., Yin, W., Ma, W., Pan, M., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403781 · Cited by 23
Hasselmann, S., Hahn, L., Lorson, T., Schätzlein, E., Sébastien, I., Beudert, M., Lühmann, T. C., Neubauer, J. C., Sextl, G., Luxenhofer, R., et al. (2021) · Materials Horizons · doi:10.1039/d1mh00925g · Cited by 14
Maciel, B. R., Baki, K., Oelschlaeger, C., & Willenbacher, N. (2022) · Chemie Ingenieur Technik · doi:10.1002/cite.202100139 · Cited by 17
3D bioprinted and integrated platforms for cardiac tissue modeling and drug testing
Yong, U., Kang, B., & Jang, J. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200106 · Cited by 17
Nanoengineered Shape‐Memory Hemostat
Hargett, S. E., Lokhande, G. K., Duran, J., Hirani, Z., Jang, L. K., Foster, S., Deo, K. A., George, S. M., Javed, M., Ware, T. H., et al. (2024) · Small Science · doi:10.1002/smsc.202400321 · Cited by 13
Self-citationSingh, I., Dixit, K., Gupta, P., George, S. M., Sinha, N., & Balani, K. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00457 · Cited by 13
Extrusion-Based Bioprinting in a Cost-Effective Bioprinter
Dharmaraj, J. J. J., Navasingh, R. J. H., Królczyk, G., & Velu, P. S. (2024) · Machines · doi:10.3390/machines12080518 · Cited by 18
Wang, D., Li, X., & Li, A. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119856 · Cited by 13
Wang, M., Zhao, J., Luo, Y., Liang, Q., Liu, Y., Zhong, G., Yu, Y., & Chen, F. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200179 · Cited by 12
Recent Advances in Engineering Bioinks for 3D Bioprinting
Wang, H., Bi, S., Shi, B., Ma, J., Lv, X., Qiu, J., & Wei, Y. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300648 · Cited by 15
Digital light processing of customized elastic scaffolds by efficient thiol-yne crosslinking
Wang, Z., Lu, Q., Li, X., Zhou, Y., Xiao, Y., & Lang, M. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112586 · Cited by 14
Galocha-León, C., Antich, C., Voltes-Martínez, A., Marchal, J. A., Mallandrich, M., Halbaut, L., Souto, E. B., Gálvez‐Martín, P., & Clares, B. (2024) · Drug Delivery and Translational Research · doi:10.1007/s13346-024-01596-9 · Cited by 16
Smart hydrogels in Lab-on-a-Chip (LOC) applications
Tevlek, A., & Cetin, E. A. (2024) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2024.106023 · Cited by 12
From microparticles to bulk hydrogels: emerging granular hydrogels in cartilage tissue engineering
Joshi, A., Agrawal, A., Choudhury, S., Rath, S. N., Joshi, A., Taori, K., Subramani, S. K., Murugesan, S., Majumdar, U., Lee, J.-H., et al. (2025) · Biomaterials Science · doi:10.1039/d5bm00801h · Cited by 13
Anand, R., Amoli, M. S., Huysecom, A.-S., Amorim, P. A., Agten, H., Geris, L., & Bloemen, V. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac78b8 · Cited by 13
“Among different materials used in bioinks, hydrogels are considered as a superior class of materials due to their excellent biocompatibility and similarity to the natural extracellular matrix (ECM)[5, 6].”
Nanomaterials for Self-Healing Hydrogels
Rumon, M. M. H. (2023) · Materials research foundations · doi:10.21741/9781644902288-11 · Cited by 11
Nanocelluloses – Nanotoxicology, Safety Aspects and 3D Bioprinting
Chinga‐Carrasco, G., Rosendahl, J., & Catalán, J. (2022) · Advances in experimental medicine and biology · doi:10.1007/978-3-030-88071-2_7 · Cited by 14
The 3D Printing of Flexible Materials: Technologies, Materials, and Challenges
Li, S., Shi, Z., Wang, Y., Wang, W., & He, R. (2025) · Materials · doi:10.3390/ma18235428 · Cited by 17
“…Hydrogel composites primarily consist of inorganic nanoparticle/hydrogel composites, polymer network/hydrogel interpenetrating network composites, fiber/ hydrogel composites, organic/inorganic hybrid elastomer nanocomposites, and biomacro-molecule/hydrogel functional composite systems [14,203–205].”
Maciel, B. R., Grimm, A., Oelschlaeger, C., Schepers, U., & Willenbacher, N. (2023) · Biofabrication · doi:10.1088/1758-5090/acee22 · Cited by 12
“A method to enhance these properties is nanoparticle reinforcement [8, 9].”
BackgroundMethodHidaka, M., Kojima, M., Sakai, S., & Delattre, C. (2024) · Polymers · doi:10.3390/polym16091274 · Cited by 11
“…no shrinking was observed successful application Subsequently, 1.5 wt% TPP aqueous solution was added to the ChPh aqueous solution. of chitosan hydrogels, it is desirable for the hydrogel the fabrication After 5 min, no shrinking was observed (Figure 2d). and stabilization of the structure [42,43].”
MethodInfluentialMultibetwork-structured PAM-AG/CNF-MXene triboelectric hydrogels
Wei, Y., Sun, X., Sun, Y., Yuan, J., Chen, H., & Luo, L. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118695 · Cited by 12
Pourmokhtari, M., Mohammad-Namazi, A., Mohseni, N., Imani, R., & Kianfar, P. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.112094 · Cited by 16
Witkowska, K., Paczkowska‐Walendowska, M., Miklaszewski, A., Plech, T., Michniak‐Kohn, B. B., Swora-Cwynar, E., & Cielecka‐Piontek, J. (2025) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2025.107143 · Cited by 12
Zhang, K., van Dorsselaer, M., Sedlačík, T., Wang, Z., Jana, S., & Hoogenboom, R. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202512518 · Cited by 11
Hao, F., & Maimaitiyiming, X. (2022) · ChemistrySelect · doi:10.1002/slct.202200201 · Cited by 11
Michailidou, G., & Bikiaris, D. Ν. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14091966 · Cited by 12
“In general, an ideal ink for 3D printing should present a shear thinning behavior [26].”
BackgroundZhao, W., Hu, C., Lin, S., Wang, Y., Liu, L., Wang, Z., Zhu, Y., & Xu, T. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103701 · Cited by 14
Hybrid Biofabrication of Heterogeneous 3D Constructs Using Low-Viscosity Bioinks
Kim, S. J., Lee, G., & Park, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05750 · Cited by 12
Design and Development of a Magnetic-Steered Minimally Invasive Bioprinting System
Chen, H., Xu, Z., Li, Z., & Xu, Q. (2023) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2023.3311373 · Cited by 11
“It has been shown that printable functional ink is the key substrate for bioprinting [3], [17], [18], [19].”
Zhang, K., Zhu, Y., Wang, T., Niu, D., Xiahou, Z., Wang, H., Fu, P., Cui, H., & Yin, J. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202307886 · Cited by 11
Multimaterial additive manufacturing manipulator for fabricating magnetoelectric pressure sensors
Liu, Z., Li, Z., Wang, Q., Wang, Y., Yang, L., Nie, X., Geng, P., Wu, Z., Tang, S., Yang, L., et al. (2022) · Science China Technological Sciences · doi:10.1007/s11431-022-2154-9 · Cited by 11
Huang, X., Wang, Y., Wang, T., Wen, F., Liu, S., & Oudeng, G. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1049965 · Cited by 14
“Chemical incorporation of biomolecules through covalent, ionic, or metallic binding is widely used in the construction of 3D hydrogel networks (Xin et al., 2019; Chimene et al., 2020).”
Background
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.