Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Items 201–300 of 600
Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review
Moud, A. A., & Moud, A. A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123391 · Cited by 47
Bioinks and biofabrication techniques for biosensors development: A review
Byrne, R., Carrico, A., Lettieri, M., Rajan, A. K., Forster, R. J., & Cumba, L. R. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101185 · Cited by 48
“For example, the core materials can mimic the microenvironment of the biomolecules thus maximizing their ability to bind target analytes in biosensors or preserve the protein expression profiles of entrapped cells [87].”
BackgroundKim, J., Choi, H., Kim, Y., & Song, S. (2022) · Small · doi:10.1002/smll.202203464 · Cited by 43
Unleashing the potential of 3D printing soft materials
Xu, S., Ahmed, S., Momin, M., Hossain, A., & Zhou, T. (2023) · Device · doi:10.1016/j.device.2023.100067 · Cited by 43
Davern, J. W., Hipwood, L., Bray, L. J., Meinert, C., & Klein, T. J. (2024) · APL Bioengineering · doi:10.1063/5.0166206 · Cited by 48
3D printing of a thermosensitive hydrogel for skin tissue engineering: A proof of concept study
Zhang, J., Yun, S., Karami, A., Jing, B., Zannettino, A. C. W., Du, Y., & Zhang, H. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00089 · Cited by 38
3D bioprinting dermal-like structures using species-specific ulvan
Chen, X., Yue, Z., Winberg, P. C., Lou, Y., Beirne, S., & Wallace, G. G. (2021) · Biomaterials Science · doi:10.1039/d0bm01784a · Cited by 43
Dynamic Mechanical Analysis of 3D Printed PETG Material
Subbarao, C. V., Reddy, Y. S., Inturi, V., & Reddy, M. I. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1057/1/012031 · Cited by 39
“2 into the field of academics and research [1].”
BackgroundLim, W., Shin, S. Y., Cha, J. M., & Bae, H. (2021) · Polymers · doi:10.3390/polym13111773 · Cited by 42
“For instance, during the 3D bioprinting process, appropriate viscosity is required for the bioink to maintain the acceptable level of mechanical strength to prevent the alteration of the printed structure [11].”
BackgroundRecent Trends and Innovation in Additive Manufacturing of Soft Functional Materials
Regis, J. E., Renteria, A., Hall, S. E., Hassan, M. S., Marquez, C., & Lin, Y. (2021) · Materials · doi:10.3390/ma14164521 · Cited by 44
“One of the challenges in fabricating scaffolds for soft tissue and organs through AM is the lack of available biomaterials with the necessary mechanical and physical properties to be compatible with AM technology [105].”
BackgroundMichailidou, G., Koukaras, E. Ν., & Bikiaris, D. Ν. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.093 · Cited by 40
3D bioprinted scaffolds for osteochondral regeneration: advancements and applications
Lu, J., Gao, Y. P., Cao, C., Wang, H., Ruan, Y., Qin, K., Liu, H., Wang, Y., Yang, P., Liu, Y., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101834 · Cited by 79
“Biomaterials serve as the primary components in bioink formulations, making the development of alternative biomaterials a critical research focus in the field [55,56].”
Zhang, H., Cai, Q., Zhu, Y., & Zhu, W. (2020) · Biomaterials Science · doi:10.1039/d0bm01840f · Cited by 38
Development of agarose–gelatin bioinks for extrusion-based bioprinting and cell encapsulation
Dravid, A., McCaughey‐Chapman, A., Raos, B. J., O’Carroll, S. J., Connor, B. J., & Svirskis, D. M. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac759f · Cited by 41
“Bioinks that possess high yield stress values can be challenging to work with, by affecting the ability of the material to be pipetted and encapsulate cells [38, 39].”
Wang, H., Lu, Z., Wang, F., Li, Y., Ou, Z., & Jiang, J. (2023) · Polymer · doi:10.1016/j.polymer.2023.125725 · Cited by 37
Wang, J., Wang, Y., Wang, R., Wang, Q., Wen, M., Wang, J., Sheng, L., Zheng, Y., & Xi, T. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400620 · Cited by 45
Progress on 3D‐Printed Metal‐Organic Frameworks with Hierarchical Structures
Lieu, W. Y., Fang, D., Tay, K. J., Li, X. L., Chu, W. C., Ang, Y. S., Li, D., Ang, L. K., Wang, Y., & Yang, H. Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200023 · Cited by 42
Ye, Y., Niu, X., Zheng, K., Wan, Z., Zhang, W., Hua, Q., Zhu, J., Qiu, Z., Wang, S., Liu, H., et al. (2024) · Materials Horizons · doi:10.1039/d4mh01645a · Cited by 38
Sharma, B., Sharma, S., & Jain, P. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.12.112 · Cited by 38
Supramolecular optical sensor arrays for on-site analytical devices
Sasaki, Y., Lyu, X., Tang, W., Wu, H., & Minami, T. (2021) · Journal of Photochemistry and Photobiology C Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2021.100475 · Cited by 36
Recycling of Load‐Bearing 3D Printable Double Network Granular Hydrogels
Charlet, A., Hirsch, M., Schreiber, S., & Amstad, E. (2022) · Small · doi:10.1002/smll.202107128 · Cited by 36
Biomacromolecule-based agent for high-precision light-based 3D hydrogel bioprinting
Ma, Y., Wei, W., Gong, L., Li, C., Hong, Y., Wang, X., Liang, R., Shao, Q., Liang, Q., Huang, W., et al. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100985 · Cited by 38
3D-Printed Chitosan-Based Scaffolds with Scutellariae baicalensis Extract for Dental Applications
Paczkowska‐Walendowska, M., Koumentakou, I., Lazaridou, M., Bikiaris, D. Ν., Miklaszewski, A., Plech, T., & Cielecka‐Piontek, J. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16030359 · Cited by 35
“Shear thinning behavior is generally what an ideal ink for 3D printing should exhibit [28].”
BackgroundMo, Q. F., Huang, L., Yao, S., Wei, Z., Zhang, S., Li, Y., Wang, X., Wang, Y., Lu, X., Huang, C., et al. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110079 · Cited by 36
Liu, H., Xing, F., Yu, P., Zhe, M., Duan, X., Liu, M., Xiang, Z., & Ritz, U. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131623 · Cited by 46
MXene Hydrogels for Soft Multifunctional Sensing: A Synthesis‐Centric Review
Amara, U., Xu, L., Hussain, I., Yang, K., Hu, H., & Ho, D. L. (2024) · Small · doi:10.1002/smll.202405047 · Cited by 38
Engineering Natural Pollen Grains as Multifunctional 3D Printing Materials
Chen, S., Shi, Q., Jang, T., Ibrahim, M. S., Deng, J., Ferracci, G., Tan, W. S., Cho, N., & Song, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106276 · Cited by 39
Global hotspots and emerging trends in 3D bioprinting research
Ding, Z., Tang, N., Huang, J., Cao, X., & Wu, S. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1169893 · Cited by 39
“2016), it is widely used in hard and soft tissue engineering (Li et al. 2018; Chimene et al. 2020; Unagolla and Jayasuriya, 2020; Rajabi et al. 2021).”
BackgroundPhan, V. H. G., Duong, H. S., Le, Q.-G. T., Janarthanan, G., Vijayavenkataraman, S., Nguyen, H.-N. H., Nguyen, B.-P. T., Manivasagan, P., Jang, E., Li, Y., et al. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02160-2 · Cited by 36
Diffusion‐Based 3D Bioprinting Strategies
Cai, B., Kilian, D., Mejia, D. R., Rios, R. J., Ali, A., & Heilshorn, S. C. (2023) · Advanced Science · doi:10.1002/advs.202306470 · Cited by 40
Guidelines for establishing a 3-D printing biofabrication laboratory
Sanicola, H. W., Stewart, C. E., Müller, M., Ahmadi, F., Wang, D., Powell, S. K., Sarkar, K., Cutbush, K., Woodruff, M. A., & Brafman, D. A. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107652 · Cited by 40
“For example, the power law and Herschel-Bulkley model are reliable tools for predicting bioink printability for initial screenings [89,130].”
Selim, O. A., Lakhani, S., Midha, S., Mosahebi, A., & Kalaskar, D. M. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0355 · Cited by 40
“211 Along with their biocompatibility, hydrogel-based bioinks are highly hydrated, tunable networks that can be formulated from a diversity of natural and synthetic multi-functional biopolymers.”
Physicochemical Characterization of Pectin‐Gelatin Biomaterial Formulations for 3D Bioprinting
Lapomarda, A., Cerqueni, G., Geven, M. A., Chiesa, I., Acutis, A. D., Blasi, M. D., Montemurro, F., Maria, C. D., Mattioli‐Belmonte, M., & Vozzi, G. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100168 · Cited by 38
Advances in Photocrosslinkable Materials for 3D Bioprinting
Zhang, W., Ye, W., & Yan, Y. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100663 · Cited by 39
Gaihre, B., Potes, M. D. A., Serdiuk, V., Tilton, M., Liu, X., & Lu, L. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121507 · Cited by 35
One-Step FRESH Bioprinting of Low-Viscosity Silk Fibroin Inks
Sakai, S., & Morita, T. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00269 · Cited by 36
3D bioprinted scaffolds based on functionalized gelatin for soft tissue engineering
Nacu, I., Bercea, M., Nita, L. E., Peptu, C. A., Butnaru, M., & Vereștiuc, L. (2023) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2023.105636 · Cited by 37
Torres-Ortega, P. V., Campo-Montoya, R. D., Plano, D., Paredes, J., Aldazabal, J., Luquín, M. R., Santamaría, E., Sanmartín, C., Blanco‐Prieto, M. J., & Garbayo, E. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00853 · Cited by 32
Cell Encapsulation and 3D Bioprinting for Therapeutic Cell Transplantation
Samadi, A., Moammeri, A., Pourmadadi, M., Abbasi, P., Hosseinpour, Z., Farokh, A., Shamsabadipour, A., Heydari, M., & Mohammadi, M. R. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01183 · Cited by 38
Dani, S., Ahlfeld, T., Albrecht, F. B., Duin, S., Kluger, P. J., Lode, A., & Gelinsky, M. (2021) · Gels · doi:10.3390/gels7040227 · Cited by 35
“However, the rheological properties, such as viscosity and shear recovery can be improved and tailored to specific needs by modulation of the polymer network [11] or by combination with reactive filler materials [12].”
BackgroundLi, Y., Di, Z., Yan, X., Wen, H., Cheng, W., Zhang, J., & Yu, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136822 · Cited by 33
Gwak, M. A., Lee, S. J., Lee, D., Park, S. A., & Park, W. H. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.12.124 · Cited by 35
Robotic in situ bioprinting for cartilage tissue engineering
Wang, Y., Pereira, R. F., Peach, C. A., Huang, B., Vyas, C., & Bártolo, P. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acda67 · Cited by 38
Granular Biphasic Colloidal Hydrogels for 3D Bioprinting
Deo, K. A., Murali, A., Tronolone, J. J., Mandrona, C., Lee, H. P., Rajput, S., Hargett, S. E., Selahi, A., Sun, Y., Alge, D. L., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303810 · Cited by 33
Self-citationLim, D. G., Kang, E., & Jeong, S. H. (2020) · Journal of Nanobiotechnology · doi:10.1186/s12951-020-00647-w · Cited by 32
Novel Strategies in Artificial Organ Development: What Is the Future of Medicine?
Klak, M., Bryniarski, T., Kowalska, P. D., Gomółka, M., Tymicki, G., Kosowska, K., Cywoniuk, P., Dobrzański, T., Turowski, P., & Wszola, M. (2020) · Micromachines · doi:10.3390/mi11070646 · Cited by 36
Chen, H., Fei, F., Li, X., Nie, Z., Zhou, D., Liu, L., Zhang, J., Zhang, H., Fei, Z., & Xu, T. (2021) · Regenerative Biomaterials · doi:10.1093/rb/rbab026 · Cited by 32
“For GEL–ALG/CMC/AHA hydrogel, as the reversible electrostatic interaction (physical crosslinking) between CMC/ALG participated in the dissipation of mechanical energy during deformation [18, 27, 28], the G0 exhibited a recovery percentage of 80% (Fig.”
BackgroundInfluentialQiu, C., Sun, Y., Li, J., Zhou, J., Xu, Y., Qiu, C., Kang, Y., Liu, J., Jiang, Y., Cui, W., et al. (2023) · Advanced Science · doi:10.1002/advs.202301639 · Cited by 33
Liver click dECM hydrogels for engineering hepatic microenvironments
Milton, L. A., Davern, J. W., Hipwood, L., Chaves, J. C. S., McGovern, J., Broszczak, D., Hutmacher, D. W., Meinert, C., & Toh, Y.-C. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.06.037 · Cited by 31
Microgel-based bioink for extrusion-based 3D bioprinting and its applications in tissue engineering
Iyer, K. S., Bao, L., Zhai, J., Jayachandran, A., Luwor, R. B., Li, J. J., & Li, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.02.003 · Cited by 58
“Moreover, the random crosslinking within hydrogel bioinks can lead to stress concentrations on less extensible chains during deformation [68].”
Zhu, J., Wei, Y., Yang, G., Zhang, J., Liu, J., Zhang, X., Zhu, Z., Chen, J., Pei, X., Wu, D., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-62540-0 · Cited by 38
“Unlikephysicallymixed fi llers,whichmay precipitate during preparation and lead to uneven mechanical properties 47,48 ,NSGhydrogelsmaintainconsistentmaterialstrength.”
Hydrogel-Colloid Composite Bioinks for Targeted Tissue-Printing
Michel, R., & Auzély‐Velty, R. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00305 · Cited by 34
Nanotechnologies and Nanomaterials in 3D (Bio)printing toward Bone Regeneration
Wang, Z., Agrawal, P. S., & Zhang, Y. S. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100035 · Cited by 34
Recent Advancements in 3D Printing and Bioprinting Methods for Cardiovascular Tissue Engineering
Kozaniti, F. K., Metsiou, D. N., Manara, A. E., Athanassiou, G., & Deligianni, D. D. (2021) · Bioengineering · doi:10.3390/bioengineering8100133 · Cited by 33
“More specifically, this technique can fully incorporate cells into hydrogels that satisfactorily mimic the microenvironment of the extracellular matrix (ECM) and directly print onto the targeted host location [38].”
MethodVascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38
“Shear-thinning, self-healing bioink formulations allow printing of hydrogel in hydrogel [31,47,87,107,117].”
BackgroundSears, C., Mondragón, E., Richards, Z. I., Sears, N., Chimene, D., McNeill, E. P., Gregory, C. A., Gaharwar, A. K., & Kaunas, R. R. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901580 · Cited by 30
Self-citationAn Inverse Thermogelling Bioink Based on an ABA-Type Poly(2-oxazoline) Amphiphile
Hahn, L., Karakaya, E., Zorn, T., Sochor, B., Maier, M., Stahlhut, P., Forster, S., Fischer, K., Seiffert, S., Pöppler, A., et al. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00427 · Cited by 35
Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 36
Development of New Collagen/Clay Composite Biomaterials
Marin, M. M., Ianchiş, R., Alexa, R. L., Gîfu, I. C., Kaya, M. G. A., Savu, D., Popescu, R. C., Alexandrescu, E., Ninciuleanu, C. M., Preda, S., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms23010401 · Cited by 30
Chakraborty, A., Pacelli, S., Alexander, S., Huayamares, S. G., Rosenkrans, Z. T., Vergel, F. E., Wu, Y., Chakravorty, A., & Paul, A. (2022) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.2c00564 · Cited by 30
Zhang, W., Shi, K., Yang, J., Li, W., Yu, Y., Mi, Y., Yao, T., Ma, P., & Fan, D. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbae097 · Cited by 29
“Furthermore, the embedded nanoparticles may interfere with the physical crosslinking between polymers, leading to a decrease in compressive strength [36].”
BackgroundCernencu, A. I., Dinu, A. I., Stancu, I., Lungu, A., & Iovu, H. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.28020 · Cited by 30
“can be adequately dissipated and crack propagations bypassed (Chimene et al., 2020; Rafieian et al., 2019).”
BackgroundInfluential3D Bioprinting Technology and Hydrogels Used in the Process
Lima, T. D. P. D. L., Canelas, C. A. D. A., Concha, V. O. C., da Costa, F. A. M., & Passos, M. F. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040214 · Cited by 35
Ethanol-induced gelation enables direct three-dimensional printing of sodium alginate hydrogel
Zhou, Q., Chng, C., Zhao, Y., Wang, Y., Xu, H., Huo, Y., & Huang, C. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112746 · Cited by 30
“Three-dimensional (3D) printing, especially extrusion-based, has recently emerged as a powerful technique to generate complex hydrogel structures [8].”
Modulus-tunable multifunctional hydrogel ink with nanofillers for 3D-Printed soft electronics
Kang, M., Park, J., Kim, S. A., Kim, T. Y., Kim, J. Y., Kim, D. W., Park, K., & Seo, J. (2024) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2024.116257 · Cited by 29
Ke, A., Li, C., Dong, B., & Zhang, X. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc00998c · Cited by 28
Visible Light-Curable Chitosan Ink for Extrusion-Based and Vat Polymerization-Based 3D Bioprintings
Hidaka, M., Kojima, M., Nakahata, M., & Sakai, S. (2021) · Polymers · doi:10.3390/polym13091382 · Cited by 30
“To widen the application of 3D bioprinting, it is important to develop inks suitable for the fabrication processes and intended applications [8,9].”
BackgroundBiomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Rheological behavior of carboxymethylcellulose and cellulose nanocrystal aqueous dispersions
da Fonsêca, J. H. L., & d’Ávila, M. A. (2021) · Rheologica Acta · doi:10.1007/s00397-021-01292-2 · Cited by 33
Template‐Enabled Biofabrication of Thick 3D Tissues with Patterned Perfusable Macrochannels
Davoodi, E., Montazerian, H., Zhianmanesh, M., Abbasgholizadeh, R., Haghniaz, R., Baidya, A., Pourmohammadali, H., Annabi, N., Weiss, P. S., Toyserkani, E., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202102123 · Cited by 30
Stretchable and self-healable hyaluronate-based hydrogels for three-dimensional bioprinting
Kim, H. S., & Lee, K. Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119846 · Cited by 28
3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties
Lackner, F., Knechtl, I., Novak, M., Nagaraj, C., Štiglic, A. D., Kargl, R., Olschewski, A., Kleinschek, K. S., & Mohan, T. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201708 · Cited by 32
Supramolecular assemblies of multifunctional microgels for biomedical applications
Zheng, J., Zhu, C., Xu, X., Wang, X., & Fu, J. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00346a · Cited by 31
Ventisette, I., Mattii, F., Dallari, C., Capitini, C., Calamai, M., Muzzi, B., Pavone, F. S., Carpi, F., & Credi, C. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00379 · Cited by 30
Mathiyalagan, R., Murugesan, M., Ramadhania, Z. M., Nahar, J., Manivasagan, P., Boopathi, V., Jang, E., Yang, D. C., Conde, J., & Thambi, T. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100824 · Cited by 29
Zheng, J., Wang, Y., Wang, Y., Duan, R., & Liu, L. (2023) · Gels · doi:10.3390/gels9090742 · Cited by 33
“nHap particles have the excellent property of promoting osteogenesis, and the composite of nHap can also enhance the mechanical strength of the hydrogel [25,26].”
BackgroundHighly Transparent, Self-Healing, and Self-Adhesive Double Network Hydrogel for Wearable Sensors
Chen, K., Liu, M., Wang, F., Hu, Y., Liu, P., Li, C., Du, Q., Yu, Y., Xiao, X., & Feng, Q. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.846401 · Cited by 26
“In order to meet all of these demands, a series of multifunctional conductive hydrogels have been prepared through the precise design of the hydrogel component and internal network structure (Chimene et al., 2020).”
BackgroundKumar, S. L., & Malviya, R. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102307 · Cited by 30
Next-generation wearable technologies: The rise of multifunctional hydrogels in smart electronics
Khayal, A., & Nami, S. A. A. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145265 · Cited by 27
Li, W., He, X., Liu, K., Wen, W., Lu, L., Liu, M., Zhou, C., & Luo, B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06411 · Cited by 25
Jongprasitkul, H., Turunen, S., Parihar, V. S., Annurakshita, S., & Kellomäki, M. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01322 · Cited by 27
Huang, Y., Li, X., Poudel, A. J., Zhang, W., & Xiao, L. J. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101668 · Cited by 28
Jeong, H., Nam, H., Kim, J., Cho, S., Park, H., Cho, Y., Jeon, H., Jang, J., & Lee, S. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.07.021 · Cited by 37
“But these methods still have the disadvantage that they contain a sacrificial layer that must be removed for the final tubular construct [30].”
BackgroundYang, W., Ni, W., Yu, C., Gu, T., Ye, L., Sun, R., Ying, X., Yik, J. H. N., Haudenschild, D. R., Yao, S., et al. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01468 · Cited by 29
Mohammad-Namazi, A., Aghajanzadeh, M. S., & Imani, R. (2024) · Materials Today Chemistry · doi:10.1016/j.mtchem.2024.102208 · Cited by 31
Wang, H., Pan, T., Chen, D., Zhou, X., Chen, H., Fu, K., Liu, D., & Wang, W. (2025) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2025.111539 · Cited by 27
Chalard, A. E., Mauduit, M., Assié-Souleille, S., Joseph, P., Malaquin, L., & Fitremann, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101162 · Cited by 39
Modelling the central nervous system: tissue engineering of the cellular microenvironment
Walczak, P. A., Esteban, P. P., Bassett, D. C., & Hill, E. J. (2021) · Emerging Topics in Life Sciences · doi:10.1042/etls20210245 · Cited by 27
Genipin-crosslinked chitosan/alginate/alumina nanocomposite gels for 3D bioprinting
Mainardi, J. C., Rezwan, K., & Maas, M. (2021) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-021-02650-3 · Cited by 25
“Accordingly, bioinks must fulfill two primary criteria: high cell viability and high printability, the latter being the ability to form 3D structures with good fidelity and integrity [2].”
BackgroundChen, H., Ahmad, T., Haider, M. S., Hahn, L., Stahlhut, P., Gröll, J., & Luxenhofer, R. (2021) · Biofabrication · doi:10.1088/1758-5090/ac40ee · Cited by 26
“Therefore, many different approaches have been proposed to improve the rheological characteristics or printing methodology to enable ‘real’ 3D printing of alginate based (bio)inks [7, 14].”
Printability of Double Network Alginate-Based Hydrogel for 3D Bio-Printed Complex Structures
Greco, I., Miskovic, V., Varon, C., Marraffa, C., & Iorio, C. S. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.896166 · Cited by 25
Print parameter optimisation for a Pluronic F-127 and alginate hybrid hydrogel
Hibbert, M., Viljoen, J. M., & Plessis, D. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00257 · Cited by 27
The role of poly(2-alkyl-2-oxazoline)s in hydrogels and biofabrication
Trachsel, L., Zenobi‐Wong, M., & Benetti, E. M. (2021) · Biomaterials Science · doi:10.1039/d0bm02217a · Cited by 28
Advances and future perspectives in hydrogel-based sensing technologies: a comprehensive review
Qi, M., Han, Y., Zhang, W., Liu, Y., Jiang, D., Wu, Z., Xu, M., Fu, J., & Li, B. (2025) · Nanotechnology · doi:10.1088/1361-6528/adf8f3 · Cited by 28
“Hydrogels are remarkable materials that have captured the attention of many scientific communities due to their unique properties [1–3].”
Hahn, L., Beudert, M., Gutmann, M., Keßler, L., Stahlhut, P., Fischer, L., Karakaya, E., Lorson, T., Thievessen, I., Detsch, R., et al. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100122 · Cited by 31
Diogo, G. S., Marques, C. F., Freitas-Ribeiro, S., Sotelo, C. G., Pérez‐Martín, R. I., Pirraco, R. P., Reis, R. L., & Silva, T. H. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112600 · Cited by 24
Kilian, D., von Witzleben, M., Lanaro, M., Wong, C. S., Vater, C., Lode, A., Allenby, M. C., Woodruff, M. A., & Gelinsky, M. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020075 · Cited by 24
3D Bioprinting: An Enabling Technology to Understand Melanoma
Fernandes, S., Vyas, C., Lim, P., Pereira, R. F., Virós, A., & Bártolo, P. (2022) · Cancers · doi:10.3390/cancers14143535 · Cited by 27
Alexa, R. L., Cucuruz, A., Ghiţulică, C., Voicu, G., Balahura, L.-R., Dinescu, S., Vlăsceanu, G. M., Iovu, H., Serafim, A., Ianchiş, R., et al. (2022) · Nanomaterials · doi:10.3390/nano12193420 · Cited by 26
“Furthermore, they are highly porous which allows oxygen and nutrients to spread within the scaffolds [11,13,14].”
BackgroundZhang, R., Guo, J., Yang, X., Jiang, X., Zhang, L., Zhou, J., Cao, X., & Duan, B. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c18569 · Cited by 24
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.