Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Mechanical forces direct stem cell behaviour in development and regeneration
Vining, K. H., & Mooney, D. J. (2017) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm.2017.108 · Cited by 1,656
Harnessing traction-mediated manipulation of the cell/matrix interface to control stem-cell fate
Huebsch, N., Arany, P. R., Mao, A. S., Shvartsman, D., Ali, O. A., Bencherif, S. A., Rivera-Feliciano, J., & Mooney, D. J. (2010) · Nature Materials · doi:10.1038/nmat2732 · Cited by 1,569
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks
Zhao, X. (2014) · Soft Matter · doi:10.1039/c3sm52272e · Cited by 1,252
Nanocomposite hydrogels for biomedical applications
Gaharwar, A. K., Peppas, N. A., & Khademhosseini, A. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25160 · Cited by 1,216
Self-citationSupramolecular polymeric hydrogels
Appel, E. A., del Barrio, J., Loh, X. J., & Scherman, O. A. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35264h · Cited by 1,159
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Griffin, D. R., Weaver, W. M., Scumpia, P. O., Di Carlo, D., & Segura, T. (2015) · Nature Materials · doi:10.1038/nmat4294 · Cited by 981
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Fracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
Two‐Dimensional Nanomaterials for Biomedical Applications: Emerging Trends and Future Prospects
Chimene, D., Alge, D. L., & Gaharwar, A. K. (2015) · Advanced Materials · doi:10.1002/adma.201502422 · Cited by 880
Self-citation3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Dai, X., Zhang, Y., Gao, L., Bai, T., Wang, W., Cui, Y., & Liu, W. (2015) · Advanced Materials · doi:10.1002/adma.201500534 · Cited by 848
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
Rheology of Fluid and Semisolid Foods: Principles and Applications
Rao, M. A. (2007) · Food Engineering Series · doi:10.1007/978-0-387-70930-7 · Cited by 800
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
The effect of matrix stiffness on the differentiation of mesenchymal stem cells in response to TGF-β
Park, J. S., Chu, J. S., Tsou, A. D., Diop, R., Tang, Z., Wang, A., & Li, S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.02.019 · Cited by 735
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Self-citationFracture mechanics and the adherence of viscoelastic bodies
Maugis, D., & Barquins, M. (1978) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/11/14/011 · Cited by 658
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Self-assembled hydrogels utilizing polymer–nanoparticle interactions
Appel, E. A., Tibbitt, M. W., Webber, M. J., Mattix, B. A., Veiseh, O., & Langer, R. (2015) · Nature Communications · doi:10.1038/ncomms7295 · Cited by 570
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Physical chemistry of supramolecular polymer networks
Seiffert, S., & Sprakel, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15191f · Cited by 552
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Rezaei Kolahchi, A., Mashayekhan, S., & Sanati-Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 540
Safety of Nanoparticles in Medicine
Wolfram, J., Zhu, M., Yang, Y., Shen, J., Gentile, E., Paolino, D., Fresta, M., Nie, G., Chen, C., Shen, H., et al. (2015) · Current Drug Targets · doi:10.2174/1389450115666140804124808 · Cited by 532
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Lou, J., Stowers, R., Nam, S., Xia, Y., & Chaudhuri, O. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.004 · Cited by 523
Bioactive Silicate Nanoplatelets for Osteogenic Differentiation of Human Mesenchymal Stem Cells
Gaharwar, A. K., Mihaila, S. M., Swami, A., Patel, A., Sant, S., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Materials · doi:10.1002/adma.201300584 · Cited by 520
Self-citationExtrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Reduced Graphene Oxide‐GelMA Hybrid Hydrogels as Scaffolds for Cardiac Tissue Engineering
Shin, S. R., Zihlmann, C., Akbari, M., Assawes, P., Cheung, L., Zhang, K., Manoharan, V., Zhang, Y. S., Yüksekkaya, M., Wan, K., et al. (2016) · Small · doi:10.1002/smll.201600178 · Cited by 497
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Gong, J. P. (2014) · Science · doi:10.1126/science.1252389 · Cited by 474
Precise Tuning of Facile One-Pot Gelatin Methacryloyl (GelMA) Synthesis
Shirahama, H., Lee, B. H., Tan, L. P., & Cho, N.-J. (2016) · Scientific Reports · doi:10.1038/srep31036 · Cited by 473
50th Anniversary Perspective: Networks and Gels: Soft but Dynamic and Tough
Creton, C. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01698 · Cited by 463
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
A Review of the Fundamental Principles and Applications of Solution Blow Spinning
Daristotle, J. L., Behrens, A. M., Sandler, A. D., & Kofinas, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12994 · Cited by 443
Spatiotemporal hydrogel biomaterials for regenerative medicine
Brown, T. E., & Anseth, K. S. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00445a · Cited by 428
Shear-Thinning Nanocomposite Hydrogels for the Treatment of Hemorrhage
Gaharwar, A. K., Avery, R. K., Assmann, A., Paul, A., McKinley, G. H., Khademhosseini, A., & Olsen, B. D. (2014) · ACS Nano · doi:10.1021/nn503719n · Cited by 403
Self-citationGaharwar, A. K., Cross, L. M., Peak, C. W., Gold, K., Carrow, J. K., Brokesh, A., & Singh, K. A. (2019) · Advanced Materials · doi:10.1002/adma.201900332 · Cited by 402
Self-citationMicrofabricated Biomaterials for Engineering 3D Tissues
Zorlutuna, P., Annabi, N., Camci‐Unal, G., Nikkhah, M., Cha, J. M., Nichol, J. W., Manbachi, A., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Advanced Materials · doi:10.1002/adma.201104631 · Cited by 394
A bioprintable form of chitosan hydrogel for bone tissue engineering
Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 376
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Self-citationMouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Bendtsen, S. T., Quinnell, S. P., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36036 · Cited by 329
Injectable Granular Hydrogels with Multifunctional Properties for Biomedical Applications
Mealy, J. E., Chung, J. J., Jeong, H., Issadore, D., Lee, D., Atluri, P., & Burdick, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201705912 · Cited by 325
Bioinspired Materials for Controlling Stem Cell Fate
Fisher, O. Z., Khademhosseini, A., Langer, R., & Peppas, N. A. (2010) · Accounts of Chemical Research · doi:10.1021/ar900226q · Cited by 315
Fracture toughness of hydrogels: measurement and interpretation
Long, R., & Hui, C.-Y. (2016) · Soft Matter · doi:10.1039/c6sm01694d · Cited by 303
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Rodell, C. B., Dusaj, N. N., Highley, C. B., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201602268 · Cited by 291
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Crack propagation in rubber-like materials
Persson, B. N. J., Albohr, O., Heinrich, G., & Ueba, H. (2005) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/17/44/r01 · Cited by 281
Nanoengineered injectable hydrogels for wound healing application
Lokhande, G., Carrow, J. K., Thakur, T., Xavier, J. R., Parani, M., Bayless, K. J., & Gaharwar, A. K. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.01.045 · Cited by 281
Self-citationStructured Macroporous Hydrogels: Progress, Challenges, and Opportunities
De France, K. J., Xu, F., & Hoare, T. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700927 · Cited by 279
Riley, L., Schirmer, L., & Segura, T. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2018.11.001 · Cited by 276
Hydrogels for delivery of bioactive agents: A historical perspective
Lee, S. C., Kwon, I. K., & Park, K. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.015 · Cited by 273
Zhang, K., Fu, Q., Yoo, J., Chen, X., Chandra, P., Mo, X., Song, L., Atala, A., & Zhao, W. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.008 · Cited by 268
Engineered Nanomaterials for Infection Control and Healing Acute and Chronic Wounds
Parani, M., Lokhande, G., Singh, A., & Gaharwar, A. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00291 · Cited by 265
Self-citationMechanical regulation of mesenchymal stem cell differentiation
Steward, A. J., & Kelly, D. J. (2015) · Journal of Anatomy · doi:10.1111/joa.12243 · Cited by 263
Clickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Self-citationYang, J., Han, C.-R., Duan, J.-F., Xu, F., & Sun, R.-C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4001997 · Cited by 261
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Self-citationPhotocrosslinkable Kappa‐Carrageenan Hydrogels for Tissue Engineering Applications
Mihaila, S. M., Gaharwar, A. K., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200317 · Cited by 244
Self-citationAdvancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
Self-citationZhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Li, H., Liu, S., & Li, L. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.02.007 · Cited by 239
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
Melt electrowriting with additive manufacturing principles
Dalton, P. D. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.007 · Cited by 237
UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering
Izadifar, M., Chapman, D., Babyn, P., Chen, X., & Kelly, M. E. (2018) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2017.0346 · Cited by 236
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Rizwan, M., Peh, G. S. L., Ang, H.-P., Lwin, N. C., Adnan, K., Mehta, J. S., Tan, W. S., & Yim, E. K. F. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.12.026 · Cited by 232
Jiang, L., Liu, C., Mayumi, K., Kato, K., Yokoyama, H., & Ito, K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01208 · Cited by 228
Biofabrication: an overview of the approaches used for printing of living cells
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & in het Panhuis, M. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-4853-6 · Cited by 227
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
In Situ Deposition of PLGA Nanofibers via Solution Blow Spinning
Behrens, A. M., Casey, B. J., Sikorski, M. J., Wu, K. L., Tutak, W., Sandler, A. D., & Kofinas, P. (2014) · ACS Macro Letters · doi:10.1021/mz500049x · Cited by 205
Mechanical Properties and Degradation of Chain and Step-Polymerized Photodegradable Hydrogels
Tibbitt, M. W., Kloxin, A. M., Sawicki, L. A., & Anseth, K. S. (2013) · Macromolecules · doi:10.1021/ma302522x · Cited by 200
Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199
Mouw, J. K., Connelly, J. T., Wilson, C. G., Michael, K. E., & Levenston, M. E. (2007) · Stem Cells · doi:10.1634/stemcells.2006-0435 · Cited by 188
Biofabricated soft network composites for cartilage tissue engineering
Bas, O., De-Juan-Pardo, E. M., Meinert, C., D’Angella, D., Baldwin, J. G., Bray, L. J., Wellard, R. M., Kollmannsberger, S., Rank, E., Werner, C., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6b15 · Cited by 188
Supramolecular polymeric biomaterials
Mann, J. L., Yu, A. C., Agmon, G., & Appel, E. A. (2018) · Biomaterials Science · doi:10.1039/c7bm00780a · Cited by 183
Cryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues
Jeon, O., Lee, Y. B., Hinton, T. J., Feinberg, A. W., & Alsberg, E. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2018.11.009 · Cited by 183
Zhou, X., Nowicki, M., Cui, H., Zhu, W., Fang, X., Miao, S., Lee, S.-J., Keidar, M., & Zhang, L. G. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.049 · Cited by 182
Predicting fracture energies and crack-tip fields of soft tough materials
Zhang, T., Lin, S., Yuk, H., & Zhao, X. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.07.007 · Cited by 180
Hydrogel substrate stress-relaxation regulates the spreading and proliferation of mouse myoblasts
Bauer, A., Gu, L., Kwee, B., Li, W. A., Dellacherie, M., Celiz, A. D., & Mooney, D. J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.041 · Cited by 180
Bridging the Gap: From 2D Cell Culture to 3D Microengineered Extracellular Matrices
Li, Y., & Kilian, K. A. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500427 · Cited by 179
Nanoengineered Colloidal Inks for 3D Bioprinting
Peak, C. W., Stein, J., Gold, K. A., & Gaharwar, A. K. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b02540 · Cited by 178
Self-citationHuang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Microfluidic-enabled bottom-up hydrogels from annealable naturally-derived protein microbeads
Sheikhi, A., de Rutte, J., Haghniaz, R., Akouissi, O., Sohrabi, A., Di Carlo, D., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.040 · Cited by 178
Injectable shear-thinning nanoengineered hydrogels for stem cell delivery
Thakur, A., Jaiswal, M. K., Peak, C. W., Carrow, J. K., Gentry, J., Dolatshahi-Pirouz, A., & Gaharwar, A. K. (2016) · Nanoscale · doi:10.1039/c6nr02299e · Cited by 173
Self-citationLee, B. H., Shirahama, H., Cho, N.-J., & Tan, L. P. (2015) · RSC Advances · doi:10.1039/c5ra22028a · Cited by 170
Wu, D., Yu, Y., Tan, J., Huang, L., Luo, B., Lu, L., & Zhou, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.040 · Cited by 168
Exploiting Advanced Hydrogel Technologies to Address Key Challenges in Regenerative Medicine
Foyt, D. A., Norman, M. D. A., Yu, T. T. L., & Gentleman, E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700939 · Cited by 164
Carrow, J. K., Cross, L. M., Reese, R. W., Jaiswal, M. K., Gregory, C. A., Kaunas, R., Singh, I., & Gaharwar, A. K. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1716164115 · Cited by 162
Self-citationSathaye, S., Mbi, A., Sönmez, C., Chen, Y., Blair, D. L., Schneider, J. P., & Pochan, D. J. (2014) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1299 · Cited by 162
(2018) · Advanced Healthcare Materials · doi:10.1002/(issn)2192-2659 · Cited by 160
Engineering of Tough Double Network Hydrogels
Chen, Q., Chen, H., Zhu, L., & Zheng, J. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600038 · Cited by 159
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
Tyrosinase-doped bioink for 3D bioprinting of living skin constructs
Shi, Y., Xing, T., Zhang, H., Yin, R., Yang, S., Wei, J., & Zhang, W. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa5b6 · Cited by 149
Apparent Decline of the Golden Toad: Underground or Extinct?
Crump, M. L., Hensley, F. R., & Clark, K. L. (1992) · Copeia · doi:10.2307/1446201 · Cited by 144
Chinga‐Carrasco, G. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00053 · Cited by 139
Effect of ionic strength on shear-thinning nanoclay–polymer composite hydrogels
Sheikhi, A., Afewerki, S., Öklü, R., Gaharwar, A. K., & Khademhosseini, A. (2018) · Biomaterials Science · doi:10.1039/c8bm00469b · Cited by 138
Self-citationBas, O., De‐Juan‐Pardo, E. M., Chhaya, M. P., Wunner, F. M., Jeon, J. E., Klein, T. J., & Hutmacher, D. W. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.034 · Cited by 135
Flow and Functional Models for Rheological Properties of Fluid Foods
Rao, M. A. (2007) · Food engineering series · doi:10.1007/978-0-387-70930-7_2 · Cited by 133
Liu, K., Zang, S., Xue, R., Yang, J., Wang, L., Huang, J., & Yan, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18155 · Cited by 131
Chen, C., Zeng, F., Xiao, X., Wang, Z., Li, X., Tan, R.-W., Liu, W., Zhang, Y., She, Z., & Li, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10072 · Cited by 128
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
Shin, M., Galarraga, J. H., Kwon, M. Y., Lee, H., & Burdick, J. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.028 · Cited by 121
Kosik‐Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90d7 · Cited by 118
A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink
Lorson, T., Jaksch, S., Lübtow, M. M., Jüngst, T., Gröll, J., Lühmann, T. C., & Luxenhofer, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00481 · Cited by 114
Cellulose Nanofibers for the Enhancement of Printability of Low Viscosity Gelatin Derivatives
Shin, S., Park, S.-H., Park, M., Jeong, E., Na, K., Youn, H. J., & Hyun, J. (2017) · BioResources · doi:10.15376/biores.12.2.2941-2954 · Cited by 109
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 108
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Nanoengineered thermoresponsive magnetic hydrogels for biomedical applications
Jalili, N. A., Muscarello, M., & Gaharwar, A. K. (2016) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10034 · Cited by 103
Self-citationThe Direction of Stretch-Induced Cell and Stress Fiber Orientation Depends on Collagen Matrix Stress
Tondon, A., & Kaunas, R. R. (2014) · PLoS ONE · doi:10.1371/journal.pone.0089592 · Cited by 100
Self-citationPhotocrosslinkable and elastomeric hydrogels for bone regeneration
Thakur, T., Xavier, J. R., Cross, L., Jaiswal, M. K., Mondragón, E., Kaunas, R. R., & Gaharwar, A. K. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35621 · Cited by 98
Self-citationGaharwar, A. K., Arpanaei, A., Andresen, T. L., & Dolatshahi‐Pirouz, A. (2015) · Advanced Materials · doi:10.1002/adma.201503918 · Cited by 94
Self-citationSarker, M. D., & Chen, D. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 92
Jalili, N. A., Jaiswal, M. K., Peak, C. W., Cross, L. M., & Gaharwar, A. K. (2017) · Nanoscale · doi:10.1039/c7nr02327h · Cited by 88
Self-citationBas, O., Lucarotti, S., D’Angella, D., Castro, N. J., Meinert, C., Wunner, F. M., Rank, E., Vozzi, G., Klein, T. J., Catelas, I., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.020 · Cited by 86
Sliding Hydrogels with Mobile Molecular Ligands and Crosslinks as 3D Stem Cell Niche
Tong, X., & Yang, F. (2016) · Advanced Materials · doi:10.1002/adma.201601484 · Cited by 82
Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration
Peak, C. W., Singh, K. A., Adlouni, M., Chen, J. W., & Gaharwar, A. K. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801553 · Cited by 81
Self-citationLee, M., Bae, K., Guillon, P., Chang, J. H., Arlov, Ø., & Zenobi‐Wong, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13166 · Cited by 79
Flow and Functional Models for Rheological Properties of Fluid Foods
Rao, M. A. (2013) · Food engineering series · doi:10.1007/978-1-4614-9230-6_2 · Cited by 76
Sustained and Prolonged Delivery of Protein Therapeutics from Two-Dimensional Nanosilicates
Cross, L., Carrow, J. K., Ding, X., Singh, K. A., & Gaharwar, A. K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17733 · Cited by 75
Self-citationLi, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie · doi:10.1002/ange.201411383 · Cited by 75
Assessment of Local Heterogeneity in Mechanical Properties of Nanostructured Hydrogel Networks
Meng, Z., Thakur, T., Chitrakar, C., Jaiswal, M. K., Gaharwar, A. K., & Yakovlev, V. V. (2017) · ACS Nano · doi:10.1021/acsnano.6b08526 · Cited by 72
Self-citationJaiswal, M. K., Carrow, J. K., Gentry, J. L., Gupta, J., Altangerel, N., Scully, M. O., & Gaharwar, A. K. (2017) · Advanced Materials · doi:10.1002/adma.201702037 · Cited by 67
Self-citationInfluence of Flow Behavior of Alginate–Cell Suspensions on Cell Viability and Proliferation
Ning, L., Guillemot, A., Zhao, J., Kipouros, G. J., & Chen, D. (2016) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2016.0011 · Cited by 62
Why the impact of mechanical stimuli on stem cells remains a challenge
Goetzke, R., Sechi, A. S., Laporte, L. D., Neuß, S., & Wagner, W. (2018) · Cellular and Molecular Life Sciences · doi:10.1007/s00018-018-2830-z · Cited by 54
Molecular weight dependency of polyrotaxane-cross-linked polymer gel extensibility
Ohmori, K., Bin, I. A., Seki, T., Liu, C., Mayumi, K., Ito, K., & Takeoka, Y. (2016) · Chemical Communications · doi:10.1039/c6cc07641f · Cited by 53
Nanocomposite hydrogels: Fracture toughness and energy dissipation mechanisms
Klein, A., Whitten, P. G., Resch-Fauster, K., & Pinter, G. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23912 · Cited by 43
Vats, K., Marsh, G. A., Harding, K., Zampetakis, I., Waugh, R. E., & Benoit, D. S. W. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36007 · Cited by 37
Microchip-based 3D-cell culture using polymer nanofibers generated by solution blow spinning
Chen, C., Townsend, A. D., Sell, S. A., & Martin, R. S. (2017) · Analytical Methods · doi:10.1039/c7ay00756f · Cited by 27
Stress relaxation and hysteresis of nanocomposite gel investigated by SAXS and SANS measurement
Nishida, T., Obayashi, A., Haraguchi, K., & Shibayama, M. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.038 · Cited by 26
Mechanical recoverability and damage process of ionic‐covalent PAA m‐alginate hybrid hydrogels
Xin, H., Brown, H. R., Naficy, S., & Spinks, G. M. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23899 · Cited by 25
Thiol‐ene Cross‐Linkable Hydrogels as Bioinks for Biofabrication
Stichler, S., Bertlein, S., Teßmar, J., Jüngst, T., & Gröll, J. (2017) · Macromolecular Symposia · doi:10.1002/masy.201600173 · Cited by 21
Robust and Degradable Hydrogels from Poly(ethylene glycol) and Semi-Interpenetrating Collagen
Peak, C. W., Nagar, S., Watts, R. D., & Schmidt, G. (2014) · Macromolecules · doi:10.1021/ma500972y · Cited by 20
Cyclic loading of a cellulose/hydrogel composite increases its fracture strength
Wyss, C. S., Karami, P., Bourban, P. ‐., & Pioletti, D. P. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.09.002 · Cited by 17
de Rutte, J. M., Koh, J., & Carlo, D. D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201970174 · Cited by 6
Howell, D. W., Peak, C. W., Bayless, K. J., & Gaharwar, A. K. (2018) · Advanced Biosystems · doi:10.1002/adbi.201870061 · Cited by 2
Self-citation
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Engineered biomaterials for in situ tissue regeneration
Gaharwar, A. K., Singh, I., & Khademhosseini, A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0209-x · Cited by 859
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Cho, S., Hwang, S. Y., Oh, D. X., & Park, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02308j · Cited by 482
Emerging Role of Hydrogels in Drug Delivery Systems, Tissue Engineering and Wound Management
Jacob, S., Nair, A. B., Shah, J., Sreeharsha, N., Gupta, S., & Shinu, P. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13030357 · Cited by 485
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.