Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
The DOI matches its Crossref record; 158 of the 165 references it cites were found in a registry or an index.
Abstract
Bioprinting is an emerging approach for fabricating cell‐laden 3D scaffolds via robotic deposition of cells and biomaterials into custom shapes and patterns to replicate complex tissue architectures. Bioprinting uses hydrogel solutions called bioinks as both cell carriers and structural components, requiring bioinks to be highly printable while providing a robust and cell‐friendly microenvironment. Unfortunately, conventional hydrogel bioinks have not been able to meet these requirements and are mechanically weak due to their heterogeneously crosslinked networks and lack of energy dissipation mechanisms. Advanced bioink designs using various methods of dissipating mechanical energy are aimed at developing next‐generation cellularized 3D scaffolds to mimic anatomical size, tissue architecture, and tissue‐specific functions. These next‐generation bioinks need to have high print fidelity and should provide a biocompatible microenvironment along with improved mechanical properties. To design these advanced bioink formulations, it is important to understand the structure–property–function relationships of hydrogel networks. By specifically leveraging biophysical and biochemical characteristics of hydrogel networks, high performance bioinks can be designed to control and direct cell functions. In this review article, current and emerging approaches in hydrogel design and bioink reinforcement techniques are critically evaluated. This bottom‐up perspective provides a materials‐centric approach to bioink design for 3D bioprinting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the stretching of DN hydrogels, the mechanical energy is dissipated by sacrificing the breakage of chemical bonds in the densely crosslinked polymer network, or by the perturbation of non-covalent interactions, thereby improving the mechanical deformability of the hydrogel”
From Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors. (2023) · cites this paper as [123]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hydrophilic gels for biological use
WICHTERLE, O., & LÍM, D. (1960) · Nature · doi:10.1038/185117a0 · Cited by 2,996
Advances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Control of Stem Cell Fate by Physical Interactions with the Extracellular Matrix
Guilak, F., Cohen, D. M., Estes, B. T., Gimble, J. M., Liedtke, W., & Chen, C. S. (2009) · Cell Stem Cell · doi:10.1016/j.stem.2009.06.016 · Cited by 1,850
Research works printed but not linked: 2
- 10.1002/adma.201705912 · DOI · Paper page
- 10.1002/advs.201801076 · DOI · Paper page
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Engineered biomaterials for in situ tissue regeneration
Gaharwar, A. K., Singh, I., & Khademhosseini, A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0209-x · Cited by 859
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Cho, S., Hwang, S. Y., Oh, D. X., & Park, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02308j · Cited by 482
Emerging Role of Hydrogels in Drug Delivery Systems, Tissue Engineering and Wound Management
Jacob, S., Nair, A. B., Shah, J., Sreeharsha, N., Gupta, S., & Shinu, P. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13030357 · Cited by 485
Natural Polymer-Based Hydrogels: From Polymer to Biomedical Applications
Zhao, L., Zhou, Y., Zhang, J., Liang, H., Chen, X., & Tan, H. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15102514 · Cited by 429
“Due to the attractive features, such as a high water content and being highly porous and permeable, which mimics the ECM and helps cell attachment and migration, hydrogels are ideal candidates for bioinks as both cellular carriers and structural constituents [189].”
BackgroundXu, T., Liu, K., Sheng, N., Zhang, M., Liu, W., Liu, H., Dai, L., Zhang, X., Si, C., Du, H., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.03.013 · Cited by 430
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Micro‐Gel Ensembles for Accelerated Healing of Chronic Wound via pH Regulation
Cui, T., Yu, J., Wang, C., Chen, S., Li, Q., Guo, K., Qing, R., Wang, G., & Ren, J. (2022) · Advanced Science · doi:10.1002/advs.202201254 · Cited by 276
Soft Bioelectronics Based on Nanomaterials
Cho, K. W., Sunwoo, S.-H., Hong, Y. J., Koo, J. H., Kim, J. H., Baik, S., Hyeon, T., & Kim, D.-H. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00531 · Cited by 244
Pardo, A., Gómez-Florit, M., Barbosa, S., Taboada, P., Domingues, R. M. A., & Gomes, M. E. (2021) · ACS Nano · doi:10.1021/acsnano.0c08253 · Cited by 243
Engineering bioinks for 3D bioprinting
Decante, G., Costa, J. B., Silva-Correia, J., Collins, M. N., Reis, R. L., & Oliveira, J. M. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2c · Cited by 237
“This reversib-ility also gives supramolecular hydrogels interesting viscoelastic behaviours which enhance their printab-ility: they demonstrate elastic properties below their yield point, behave like viscous liquids after yielding, and reform into an elastic solid after shear stress is removed [9].”
Influential3D Bioprinting of Cell‐Laden Hydrogels for Improved Biological Functionality
Hull, S. M., Brunel, L. G., & Heilshorn, S. C. (2022) · Advanced Materials · doi:10.1002/adma.202103691 · Cited by 240
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi-Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 239
Rheology and printability: A survey of critical relationships for direct ink write materials design
Rau, D. A., Williams, C. B., & Bortner, M. J. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101188 · Cited by 227
Extracellular‐Matrix‐Reinforced Bioinks for 3D Bioprinting Human Tissue
De Santis, M. M., Alsafadi, H. N., Tas, S., Bölükbas, D. A., Prithiviraj, S., Da Silva, I. A. N., Mittendorfer, M., Ota, C., Stegmayr, J., Daoud, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005476 · Cited by 233
Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors.
Luo, Y., Li, J., Ding, Q., Wang, H., Liu, C., & Wu, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01109-2 · Cited by 236
Inorganic Biomaterials for Regenerative Medicine
Brokesh, A. M., & Gaharwar, A. K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17801 · Cited by 231
Self-citationAdvancing bioinks for 3D bioprinting using reactive fillers: a review
Heid, S., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.040 · Cited by 224
High-strength hydrogels: Fabrication, reinforcement mechanisms, and applications
Huang, H., Dong, Z., Ren, X., Jia, B., Li, G., Zhou, S., Zhao, X., & Wang, W. (2023) · Nano Research · doi:10.1007/s12274-022-5129-1 · Cited by 219
Copolymer/Clay Nanocomposites for Biomedical Applications
Murugesan, S., & Scheibel, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908101 · Cited by 214
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Deo, K. A., Singh, K. A., Peak, C. W., Alge, D. L., & Gaharwar, A. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0298 · Cited by 199
“Advanced bioinks also protect the encapsulated cells without compromising the printability or print fidelity.(40)”
Self-citation3D Bioprinted cancer models: Revolutionizing personalized cancer therapy
Augustine, R., Kalva, S. N., Ahmad, R., Zahid, A. A., Hasan, S., Nayeem, A., McClements, L., & Hasan, A. (2021) · Translational Oncology · doi:10.1016/j.tranon.2021.101015 · Cited by 195
Magnetically Controlled Soft Robotics Utilizing Elastomers and Gels in Actuation: A Review
Chung, H., Parsons, A. M., & Zheng, L. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000186 · Cited by 196
Chitosan-based inks for 3D printing and bioprinting
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Hosseini Rad, S., Naderi, G., Saeb, M. R., et al. (2022) · Green Chemistry · doi:10.1039/d1gc01799c · Cited by 191
Li, P., Fu, L., Liao, Z., Peng, Y., Ning, C., Gao, C., Zhang, D., Sui, X., Lin, Y., Liu, S., et al. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121131 · Cited by 189
Shahbazi, M., & Jäger, H. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01379 · Cited by 189
3D Printing of Dual-Physical Cross-linking Hydrogel with Ultrahigh Strength and Toughness
Jiang, P., Lin, P., Yang, C., Qin, H., Wang, X., & Zhou, F. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02941 · Cited by 187
Germaini, M.-M., Belhabib, S., Guessasma, S., Deterre, R., Corre, P., & Weiss, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100963 · Cited by 184
Advances in Engineering Human Tissue Models
Moysidou, C.-M., Barberio, C., & Owens, R. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.620962 · Cited by 179
“Moreover, AD approaches, and specifically 3DP techniques, based on coupling multimaterial printing with high performance bioinks (i.e., hydrogel solutions that act both as cell carriers, and structural components to control and direct cell activity and fate; Chimene et al., 2020) and biomolecules have been developed t…”
MethodDesign, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Nanoengineered Osteoinductive Bioink for 3D Bioprinting Bone Tissue
Chimene, D., Miller, L., Cross, L. M., Jaiswal, M. K., Singh, I., & Gaharwar, A. K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19037 · Cited by 167
Self-citationDing, A., Tang, F., & Alsberg, E. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00070 · Cited by 165
Zandi, N., Sani, E. S., Mostafavi, E., Ibrahim, D. M., Saleh, B., Shokrgozar, M. A., Tamjid, E., Weiss, P. S., Simchi, A., & Annabi, N. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2020.120476 · Cited by 162
“Therefore, intensive studies have been performed to develop printable and structurally stable bioinks which can also protect encapsulated cells [24].”
Electrospinning and electrospun nanofibers: From academic research to industrial production
Wang, C., Wang, W., Qi, H., Dai, Y., Jiang, S., Ding, B., Wang, X., Li, C., Zeng, J., Wu, T., et al. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101494 · Cited by 176
Vijayakanth, T., Shankar, S., Finkelstein-Zuta, G., Rencus-Lazar, S., Gilead, S., & Gazit, E. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00202k · Cited by 161
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Rastin, H., Ormsby, R. T., Atkins, G. J., & Losic, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00169 · Cited by 159
Engineering Hydrogel‐Based Biomedical Photonics: Design, Fabrication, and Applications
Guimarães, C. F., Ahmed, R., Marques, A. P., Reis, R. L., & Demirci, U. (2021) · Advanced Materials · doi:10.1002/adma.202006582 · Cited by 162
Fang, W., Yang, M., Wang, L., Li, W., Liu, M., Jin, Y., Wang, Y., Yang, R., Wang, Y., Zhang, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.759 · Cited by 199
“In other words, the current limited number of bioinks can meet the requirements of printing biophysics and at the same time provide an ideal 3D environment for cells[41,80,167].”
BackgroundEffects of Processing Parameters of 3D Bioprinting on the Cellular Activity of Bioinks
Adhikari, J., Roy, A., Das, A., Ghosh, M., Thomas, S., Sinha, A., Kim, J., & Saha, P. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000179 · Cited by 176
Hydrogel polymer electrolytes toward better zinc-ion batteries: A comprehensive review
Li, J., Azizi, A., Zhou, S., Liu, S., Han, C., Chang, Z., Pan, A., & Cao, G. (2024) · eScience · doi:10.1016/j.esci.2024.100294 · Cited by 173
Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Liu, N., Ye, X., Yao, B., Zhao, M., Wu, P., Liu, G., Zhuang, D., Jiang, H., Chen, X., He, Y., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.021 · Cited by 177
“Rheology refers to the increase in the viscosity of non-Newtonian fluids such as hydrogels with time under shear stress [128].”
Background3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 153
Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering
Samandari, M., Quint, J. P., Rodríguez‐delaRosa, A., Sinha, I., Pourquié, O., & Tamayol, A. (2021) · Advanced Materials · doi:10.1002/adma.202105883 · Cited by 156
Recent advances in 3D printing of nanocellulose: structure, preparation, and application prospects
Ee, L. Y., & Li, S. F. Y. (2020) · Nanoscale Advances · doi:10.1039/d0na00408a · Cited by 152
Kilian, D., Ahlfeld, T., Akkineni, A. R., Bernhardt, A., Gelinsky, M., & Lode, A. (2020) · Scientific Reports · doi:10.1038/s41598-020-65050-9 · Cited by 151
Generalizing hydrogel microparticles into a new class of bioinks for extrusion bioprinting
Xin, S., Deo, K. A., Dai, J. H., Pandian, N. K. R., Chimene, D., Möbius, R., Jain, A., Han, A., Gaharwar, A. K., & Alge, D. L. (2021) · Science Advances · doi:10.1126/sciadv.abk3087 · Cited by 152
“Various strategies have been developed to modify existing 3D printing techniques and expand the bioink toolkit, including locking the printed shape in an uncross-linked state using suspension baths (5, 6), rapid improvement of the mechanical strength of bioinks after extrusion via double network formation (7), photopo…”
MethodSelf-citationRecent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair
Rajabi, N., Rezaei, A. A., Kharaziha, M., Bakhsheshi‐Rad, H. R., Luo, H., Ramakrishna, S., & Berto, F. (2021) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0350 · Cited by 151
“19,23,60 However, despite wide researches on GelMA-based bioinks, limited reviews have been published recently.”
Zhou, H., Lai, J., Jin, X., Liu, H., Li, X., Chen, W., Ma, A., & Zhou, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127544 · Cited by 136
Recent trends in gelatin methacryloyl nanocomposite hydrogels for tissue engineering
Sakr, M. A., Sakthivel, K., Hossain, T., Shin, S. R., Siddiqua, S., Kim, J.-H., & Kim, K. (2021) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37310 · Cited by 139
ABOUZEID, R. E., Khiari, R., Salama, A., Diab, M. A., Beneventi, D., & Dufresne, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.181 · Cited by 134
3D printed biomimetic epithelium/stroma bilayer hydrogel implant for corneal regeneration
He, B., Wang, J., Xie, M., Xu, M., Zhang, Y., Hao, H., Xing, X., Lu, W. W., Han, Q., & Liu, W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.034 · Cited by 131
Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Fonseca, A. C., Melchels, F. P. W., Ferreira, M. J. S., Moxon, S. R., Potjewyd, G., Dargaville, T. R., Kimber, S. J., & Domingos, M. A. N. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00342 · Cited by 143
Hazur, J., Detsch, R., Karakaya, E., Kaschta, J., Teßmar, J., Schneidereit, D., Friedrich, O., Schubert, D. W., & Boccaccini, A. R. (2020) · Biofabrication · doi:10.1088/1758-5090/ab98e5 · Cited by 134
“Gaharwar [46, 47], also pointing out their limitations as well as alternative models.”
BackgroundStimuli-responsive engineered living materials
Rivera‐Tarazona, L. K., Campbell, Z. T., & Ware, T. H. (2020) · Soft Matter · doi:10.1039/d0sm01905d · Cited by 132
Tan, B., Gan, S., Wang, X., Liu, W., & Li, X. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00172h · Cited by 134
Silk fibroin hydrogels for biomedical applications
Zhang, H., Xu, D., Zhang, Y., Li, M., & Chai, R. (2022) · Smart Medicine · doi:10.1002/smmd.20220011 · Cited by 139
A Quantitative Description for Designing the Extrudability of Shear‐Thinning Physical Hydrogels
Hernandez, H. L., Souza, J. W., & Appel, E. A. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000295 · Cited by 114
Engineering of tissue constructs using coaxial bioprinting
Kjar, A., McFarland, B., Mecham, K., Harward, N., & Huang, Y. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.08.020 · Cited by 141
“bioink yield stress may be overcome by gravity, making printing actuation impossible [25].”
Background3D Printing of Self‐Healing Materials
Roppolo, I., Caprioli, M., Pirri, C. F., & Magdassi, S. (2023) · Advanced Materials · doi:10.1002/adma.202305537 · Cited by 117
Constructing phase separation in polymer gels: Strategies, functions and applications
Wang, Z., Qiu, W., & Zhang, Q. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101847 · Cited by 118
3D Printing Approach in Dentistry: The Future for Personalized Oral Soft Tissue Regeneration
Nešić, D., Schaefer, B. M., Sun, Y., Saulačić, N., & Sailer, I. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm9072238 · Cited by 123
“Hydrogels offer modifiable chemical composition, and adjustable mechanical and biodegradation properties [32].”
BackgroundFan, Y., Yue, Z., Lucarelli, E., & Wallace, G. G. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001410 · Cited by 112
Jia, L., Hua, Y., Zeng, J., Liu, W., Wang, D., Zhou, G., Liu, X., & Jiang, H. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.02.032 · Cited by 137
Zheng, J., Chen, G., Yang, H., Zhu, C., Li, S., Wang, W., Ren, J., Cong, Y., Xu, X., Wang, X., et al. (2023) · Materials Horizons · doi:10.1039/d3mh00718a · Cited by 106
Issues affecting the longevity of the continuous peritoneal dialysis therapy.
Kawaguchi, Y., Hasegawa, T., Nakayama, M., Kubo, H., & Shigematu, T. (1997) · PubMed · Cited by 105
Castilho, M. D., de Ruijter, M., Beirne, S., Villette, C. C., Ito, K., Wallace, G. G., & Malda, J. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2020.04.014 · Cited by 106
Sun, H., Zhang, C., Zhang, B., Song, P., Xu, X., Gui, X., Chen, X., Lu, G., Li, X., Liang, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130961 · Cited by 107
Dai, W., Zhang, L., Yu, Y., Yan, W., Zhao, F., Fan, Y., Cao, C., Cai, Q., Hu, X., & Ao, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200710 · Cited by 106
Cell-Laden Nanocomposite Bioinks for 3D Bioprinting
Cai, Y., Chang, S. Y., Gan, S. W., Ma, S., Lu, W. F., & Yen, C. C. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.014 · Cited by 114
Loewner, S., Heene, S., Baroth, T., Heymann, H., Cholewa, F., Blume, H., & Blume, C. A. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.896719 · Cited by 117
“In comparison, a higher crosslinking density frequently causes limited cell mobility and therefore migration, but can also restrict proliferation and differentiation due to reduced porosity and diffusivity (Momot et al., 2017; Chimene et al., 2020; Ramiah et al., 2020).”
Hu, T. H., Cui, X., Zhu, M., Wu, M., Tian, Y., Yao, B., Song, W., Niu, Z., Huang, S., & Fu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.06.001 · Cited by 102
“has been a long time limitation of guest-host based hydrogels [13,25,26].”
Background3D-Printed Gelatin-Alginate Hydrogel Dressings for Burn Wound Healing: A Comprehensive Study
Fayyazbakhsh, F., Khayat, M. J., & Leu, M. C. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.618 · Cited by 102
“The molecular weight of gelatin ranges from 50 to 100 kDa with very low extensibility of the network and high entropy in 22 – 23°C, which justifies the relatively low viscosity and elasticity of gelatin[37].”
BackgroundAI-driven 3D bioprinting for regenerative medicine: From bench to bedside
Zhang, Z., Zhou, X., Fang, Y., Xiong, Z., & Zhang, T. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.11.021 · Cited by 150
3D Printing Scaffold Vaccine for Antitumor Immunity
Zhang, Y., Xu, J., Fei, Z., Dai, H., Fan, Q., Yang, Q., Chen, Y., Wang, B., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202106768 · Cited by 104
Zhu, Y., Yu, X., Liu, H., Li, J., Gholipourmalekabadi, M., Lin, K., Yuan, C., & Wang, P. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.04.032 · Cited by 136
“Nanomaterials are widely used to enhance the mechanical characteristics of hydrogels since they can stride across multiple polymer chains to effectively disperse stress across the network, thus increasing the mechanical strength of hydrogels [33].”
BackgroundOsouli-Bostanabad, K., Masalehdan, T., Kapsa, R. M. I., Quigley, A. F., Lalatsa, A., Bruggeman, K. F., Franks, S. J., Williams, R. J., & Nisbet, D. R. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00094 · Cited by 111
Biomedical applications of supramolecular hydrogels with enhanced mechanical properties
Xu, J., Zhu, X., Zhao, J., Ling, G., & Zhang, P. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.103000 · Cited by 101
Wang, Y., Chen, Y., Zheng, J., Liu, L., & Zhang, Q. (2022) · ACS Omega · doi:10.1021/acsomega.2c00335 · Cited by 98
Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 104
Sustainable and safer nanoclay composites for multifaceted applications
Padil, V. V. T., Kumar, K. P. A., Murugesan, S., Torres–Mendieta, R., Wacławek, S., Cheong, J. Y., Černík, M., & Varma, R. S. (2022) · Green Chemistry · doi:10.1039/d1gc03949k · Cited by 101
Advancing 3D bioprinting through machine learning and artificial intelligence
Ramesh, S., Deep, A., Tamayol, A., Kamaraj, A. B., Mahajan, C., & Madihally, S. V. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00331 · Cited by 112
Chakraborty, A., Roy, A., Ravi, S. P., & Paul, A. (2021) · Biomaterials Science · doi:10.1039/d1bm00605c · Cited by 102
Recent advances in the 3D printing of electrically conductive hydrogels for flexible electronics
Yang, R., Chen, X., Zheng, Y., Chen, K., Zeng, W., & Wu, X. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc06162c · Cited by 98
Shedding light on 3D printing: Printing photo-crosslinkable constructs for tissue engineering
Zhang, Q., Bei, H., Zhao, M., Dong, Z., & Zhao, X. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121566 · Cited by 96
Shahbazi, M., Jäger, H., Ettelaie, R., Mohammadi, A., & Kashi, P. A. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103598 · Cited by 125
“The bioinks composed of TRP hydrogels could form a gel by simply varying the external temperature within a physiological range for 3D bioprinting [45].”
Taymour, R., Kilian, D., Ahlfeld, T., Gelinsky, M., & Lode, A. (2021) · Scientific Reports · doi:10.1038/s41598-021-84384-6 · Cited by 96
Im, S., Choe, G., Seok, J. M., Yeo, S. J., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.012 · Cited by 98
3D Bioprinted Multicellular Vascular Models
Gold, K. A., Saha, B., Pandian, N. K. R., Walther, B. K., Palma, J. A., Jo, J. A., Cooke, J. P., Jain, A., & Gaharwar, A. K. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101141 · Cited by 95
Self-citationPeng, H., Li, H.-C., Zhang, X., Tang, J.-Z., Liang, Y.-P., Qiao, L., Zhu, Y., Hou, M.-M., Wei, S.-M., Zhang, Z., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146238 · Cited by 87
Multifunctional Conductive Hydrogel Interface for Bioelectronic Recording and Stimulation
Tang, H., Li, Y., Liao, S., Liu, H., Qiao, Y., & Zhou, J. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202400562 · Cited by 96
Prendergast, M. E., Davidson, M. D., & Burdick, J. A. (2021) · Biofabrication · doi:10.1088/1758-5090/ac25cc · Cited by 106
The translational paradigm of nanobiomaterials: Biological chemistry to modern applications
Sinha, A., Simnani, F. Z., Singh, D., Nandi, A., Choudhury, A., Patel, P., Jha, E., Chouhan, R. S., Kaushik, N. K., Mishra, Y. K., et al. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100463 · Cited by 99
GelMA/bioactive silica nanocomposite bioinks for stem cell osteogenic differentiation
Tavares, M. T., Gaspar, V. M., Monteiro, M. V., Farinha, J. P. S., Baleizão, C., & Mano, J. F. (2021) · Biofabrication · doi:10.1088/1758-5090/abdc86 · Cited by 93
Hasany, M., Talebian, S., Sadat, S., Ranjbar, N., Mehrali, M., Wallace, G. G., & Mehrali, M. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101150 · Cited by 109
Tailoring bioinks of extrusion-based bioprinting for cutaneous wound healing
Wang, Y., Yuan, X., Yao, B., Zhu, S., Zhu, P., & Huang, S. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.024 · Cited by 106
“spatial distributions, it remains quite challenging to tailor their surface properties [79].”
BackgroundConductive hydrogels for bioenergy harvesting and self-powered application
Zhang, C., Nayeem, M. O. G., Wang, Z., Pu, X., Dağdeviren, C., Wang, Z. L., Zhang, X., & Liu, R. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101156 · Cited by 93
Li, J., Ke, H., Lei, X., Zhang, J. K., Wen, Z., Xiao, Z., Chen, H., Yao, J., Wang, X., Wei, Z., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.02.024 · Cited by 153
“Hydrogels, though versatile, typically exhibit weak mechanical properties and susceptibility to integrity compromise [15].”
BackgroundMoud, A. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.148 · Cited by 90
Advanced supramolecular design for direct ink writing of soft materials
Tang, M., Zhong, Z., & Ke, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01011a · Cited by 93
Metadata
- Authors
- Chimene, D., Kaunas, R., & Gaharwar, A. K.
- Affiliations
- Texas A&M University (US)
- Corresponding author
- Gaharwar, Akhilesh K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10-10
- Volume
- 32
- Issue
- 1
- Pages
- e1902026-e1902026
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2979512365
- Cited by
- 600
- References
- 165
- Citations by year
- 2026: 44 · 2025: 74 · 2024: 101 · 2023: 97 · 2022: 108 · 2021: 114 · 2020: 61
- FWCI
- 5.69
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Institute of Biomedical Imaging and Bioengineering
- National Science Foundation (DP2 EB026265, CBET 1705852)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- hydrogel bioinks, 3D bioprinting, cell-laden scaffolds, hydrogel mechanical properties, energy dissipation, hydrogel network structure, structure-property-function relationships, printability, biocompatibility, tissue engineering scaffolds
- MeSH terms
- Biocompatible Materials, Humans, Ink, Rheology, Hydrogels, Tissue Scaffolds, Mesenchymal Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.