The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Open accessAbstract
Biofabrication technologies, including stereolithography and extrusion‐based printing, are revolutionizing the creation of complex engineered tissues. The current paradigm in bioprinting relies on the additive layer‐by‐layer deposition and assembly of repetitive building blocks, typically cell‐laden hydrogel fibers or voxels, single cells, or cellular aggregates. The scalability of these additive manufacturing technologies is limited by their printing velocity, as lengthy biofabrication processes impair cell functionality. Overcoming such limitations, the volumetric bioprinting of clinically relevant sized, anatomically shaped constructs, in a time frame ranging from seconds to tens of seconds is described. An optical‐tomography‐inspired printing approach, based on visible light projection, is developed to generate cell‐laden tissue constructs with high viability (>85%) from gelatin‐based photoresponsive hydrogels. Free‐form architectures, difficult to reproduce with conventional printing, are obtained, including anatomically correct trabecular bone models with embedded angiogenic sprouts and meniscal grafts. The latter undergoes maturation in vitro as the bioprinted chondroprogenitor cells synthesize neo‐fibrocartilage matrix. Moreover, free‐floating structures are generated, as demonstrated by printing functional hydrogel‐based ball‐and‐cage fluidic valves. Volumetric bioprinting permits the creation of geometrically complex, centimeter‐scale constructs at an unprecedented printing velocity, opening new avenues for upscaling the production of hydrogel‐based constructs and for their application in tissue engineering, regenerative medicine, and soft robotics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Principles of Computerized Tomographic Imaging
Kak, A. C., Slaney, M., & Wang, G. (2002) · Medical Physics · doi:10.1118/1.1455742 · Cited by 1,877
Designer matrices for intestinal stem cell and organoid culture
Gjorevski, N., Sachs, N., Manfrin, A., Giger, S., Bragina, M. E., Ordóñez-Morán, P., Clevers, H., & Lutolf, M. P. (2016) · Nature · doi:10.1038/nature20168 · Cited by 1,426
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Self-citationBlaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Identification of the Human Skeletal Stem Cell
Chan, C. K. F., Gulati, G. S., Sinha, R., Tompkins, J. V., Lopez, M., Carter, A. C., Ransom, R. C., Reinisch, A., Wearda, T., Murphy, M., et al. (2018) · Cell · doi:10.1016/j.cell.2018.07.029 · Cited by 595
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
The effect of photopolymerization on stem cells embedded in hydrogels
Fedorovich, N. E., Oudshoorn, M. H., van Geemen, D., Hennink, W. E., Alblas, J., & Dhert, W. J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.037 · Cited by 416
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Self-citationAqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels
Ying, G., Jiang, N., Maharjan, S., Yin, Y., Chai, R., Cao, X., Yang, J., Miri, A. K., Hassan, S., & Zhang, Y. S. (2018) · Advanced Materials · doi:10.1002/adma.201805460 · Cited by 377
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Engineering Stem Cell Self-organization to Build Better Organoids
Brassard, J. A., & Lutolf, M. P. (2019) · Cell Stem Cell · doi:10.1016/j.stem.2019.05.005 · Cited by 373
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
Self-citationBio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Self-citationLim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Self-citationDesign Characteristics for the Tissue Engineering of Cartilaginous Tissues
Almarza, A. J., & Athanasiou, K. A. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000007786.37957.65 · Cited by 226
Bioactive site-specifically modified proteins for 4D patterning of gel biomaterials
Shadish, J. A., Benuska, G. M., & DeForest, C. A. (2019) · Nature Materials · doi:10.1038/s41563-019-0367-7 · Cited by 211
Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering
Miao, S., Cui, H., Nowicki, M., Xia, L., Zhou, X., Lee, S., Zhu, W., Sarkar, K., Zhang, Z., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800101 · Cited by 209
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Lorber, B., Hsiao, W.-K., Hutchings, I. M., & Martin, K. R. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 207
Electrically Driven Microengineered Bioinspired Soft Robots
Shin, S. R., Migliori, B., Miccoli, B., Li, Y., Mostafalu, P., Seo, J., Mandla, S., Enrico, A., Antona, S., Sabarish, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704189 · Cited by 195
Self-citationOrgan sculpting by patterned extracellular matrix stiffness
Crest, J., Diz-Muñoz, A., Chen, D.-Y., Fletcher, D. A., & Bilder, D. (2017) · eLife · doi:10.7554/elife.24958 · Cited by 177
Three‐Dimensional μ‐Printing: An Enabling Technology
Hohmann, J. K., Renner, M., Waller, E. H., & von Freymann, G. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500328 · Cited by 165
de Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. D., & Malda, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800418 · Cited by 159
Self-citationDesigning stem cell niches for differentiation and self-renewal
Donnelly, H., Salmerón‐Sánchez, M., & Dalby, M. J. (2018) · Journal of The Royal Society Interface · doi:10.1098/rsif.2018.0388 · Cited by 155
Bioprinting of a functional vascularized mouse thyroid gland construct
Bulanova, E. A., Koudan, E. V., Degosserie, J., Heymans, C., Pereira, F. D. A. S., Parfenov, V. A., Sun, Y. N., Wang, Q., Akhmedova, S. A., Sviridova, I. K., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7fdd · Cited by 139
Highly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 121
Bahçecioğlu, G., Hasırcı, N., Bilgen, B., & Hasırcı, V. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf707 · Cited by 113
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Self-citationBio-ink development for three-dimensional bioprinting of hetero-cellular cartilage constructs
Mouser, V. H. M., Levato, R., Mensinga, A., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1553960 · Cited by 101
Self-citationHolmes, R., Yang, X.-B., Dunne, A., Florea, L., Wood, D. J., & Tronci, G. (2017) · Polymers · doi:10.3390/polym9060226 · Cited by 99
Ruskowitz, E. R., & DeForest, C. A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00177 · Cited by 82
Puetzer, J. L., & Bonassar, L. J. (2016) · Tissue Engineering Part A · doi:10.1089/ten.tea.2015.0519 · Cited by 74
Bartnikowski, M., Bartnikowski, N., Woodruff, M. A., Schrobback, K., & Klein, T. J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.038 · Cited by 66
Ouyang, L., Burdick, J. A., & Sun, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19537 · Cited by 55
Lim, W. Y., Ramasamy, A., Lloyd, G., & Bhattacharyya, S. (2016) · Heart · doi:10.1136/heartjnl-2016-309830 · Cited by 46
Engineering of a complex bone tissue model with endothelialised channels and capillary-like networks
BJ, I., Lim, K. S., Chang, Y., Soliman, B. G., Pennings, I., Melchels, F. P. W., Woodfield, T. B. F., Rosenberg, A. J. W. P., Malda, J., & Gawlitta, D. (2018) · European Cells and Materials · doi:10.22203/ecm.v035a23 · Cited by 44
Self-citationEffect of donor variation on osteogenesis and vasculogenesis in hydrogel cocultures
Pennings, I., van Dijk, L. A., Huuksloot, J., Fledderus, J. O., Schepers, K., Braat, A. K., Hsiao, E. C., Barruet, E., Morales, B. M., Verhaar, M. C., et al. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2807 · Cited by 35
Genome stability of programmed stem cell products
Martin, U. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.09.004 · Cited by 26
Effect of inoculum density on human‐induced pluripotent stem cell expansion in 3D bioreactors
Greuel, S., Hanci, G., Böhme, M., Miki, T., Schubert, F., Sittinger, M., Mandenius, C., Zeilinger, K., & Freyer, N. (2019) · Cell Proliferation · doi:10.1111/cpr.12604 · Cited by 17
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Metadata
- Authors
- Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-08-19
- Volume
- 31
- Issue
- 42
- Pages
- e1904209-e1904209
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2969211941
- Cited by
- 604
- References
- 50
- FWCI
- 17.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.