The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Progress Towards Commercially Viable Li–S Battery Cells
Abstract
A broad overview of how experimental parameters affect the performance of Li–S batteries is presented here, extending the view on these batteries beyond sophisticated conductive sulfur hosts, which have been the primary focus of many studies in recent years. The exquisite sensitivity of the Li–S system to various experimental parameters speaks to the importance of directing future research towards the entire Li–S‐battery set‐up, rather than just some components. The main overall goal should be to produce cells with high specific energy and energy density. These are challenging tasks and more work is required, in particular in the area of cell engineering. The achievements spotlighted in this report show that outstanding results can be obtained by suitably engineering cathodes and other cell parts, without the need to use advanced structured hosts for sulfur. A lot of stimulating, original and successful research has been done recently in the field, leading to satisfying Li–S battery performances and paving the way for more applied research, with the goal of entering a pre‐application phase in Li–S battery development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Li, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
In Operando X-ray Diffraction and Transmission X-ray Microscopy of Lithium Sulfur Batteries
Nelson, J., Misra, S., Yang, Y., Jackson, A., Liu, Y., Wang, H., Dai, H., Andrews, J. C., Cui, Y., & Toney, M. F. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2121926 · Cited by 538
Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Solvate Ionic Liquid Electrolyte for Li–S Batteries
Dokko, K., Tachikawa, N., Yamauchi, K., Tsuchiya, M., Yamazaki, A., Takashima, E., Park, J.-W., Ueno, K., Seki, S., Serizawa, N., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.111308jes · Cited by 507
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Zhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Tailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
A strategic approach to recharging lithium-sulphur batteries for long cycle life
Su, Y.-S., Fu, Y., Cochell, T., & Manthiram, A. (2013) · Nature Communications · doi:10.1038/ncomms3985 · Cited by 449
Evers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
New insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Li, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Wu, F., Lee, J. T., Nitta, N., Kim, H., Borodin, O., & Yushin, G. (2015) · Advanced Materials · doi:10.1002/adma.201404194 · Cited by 352
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Nagao, M., Hayashi, A., Tatsumisago, M., Kanetsuku, T., Tsuda, T., & Kuwabata, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51059j · Cited by 299
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201300680 · Cited by 287
Shuttle phenomenon – The irreversible oxidation mechanism of sulfur active material in Li–S battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.132 · Cited by 285
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Angewandte Chemie · doi:10.1002/ange.201300680 · Cited by 261
Busche, M. R., Adelhelm, P., Sommer, H., Schneider, H., Leitner, K., & Janek, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.075 · Cited by 249
Polysulfide dissolution control: the common ion effect
Shin, E. S., Kim, K., Oh, S. H., & Cho, W. I. (2013) · Chem. Commun. · doi:10.1039/c2cc36986a · Cited by 247
Rechargeable lithium/sulfur battery with suitable mixed liquid electrolytes
Choi, J.-W., Kim, J.-K., Cheruvally, G., Ahn, J.-H., Ahn, H.-J., & Kim, K.-W. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2006.08.016 · Cited by 246
Chen, H., Dong, W., Ge, J., Wang, C., Wu, X., Lu, W., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01910 · Cited by 233
Han, S.-C., Song, M.-S., Lee, H., Kim, H.-S., Ahn, H.-J., & Lee, J.-Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1576766 · Cited by 232
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Hart, C. J., Cuisinier, M., Liang, X., Kundu, D., Garsuch, A., & Nazar, L. F. (2015) · Chemical Communications · doi:10.1039/c4cc08980d · Cited by 225
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., & Zhang, X. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201202127 · Cited by 223
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
Song, M.-S., Han, S.-C., Kim, H.-S., Kim, J.-H., Kim, K.-T., Kang, Y.-M., Ahn, H.-J., Dou, S. X., & Lee, J.-Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710895 · Cited by 218
Choi, Y., Chung, Y.-D., Baek, C.-Y., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.053 · Cited by 215
Wang, C., Wan, W., Chen, J.-T., Zhou, H.-H., Zhang, X.-X., Yuan, L.-X., & Huang, Y.-H. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00915c · Cited by 206
Zheng, W., Liu, Y. W., Hu, X. G., & Zhang, C. F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.021 · Cited by 205
Chang, D.-R., Lee, S.-H., Kim, S.-W., & Kim, H.-T. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00418-4 · Cited by 204
Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell
Choi, Y. J., Jung, B. S., Lee, D. J., Jeong, J. H., Kim, K. W., Ahn, H. J., Cho, K. K., & Gu, H. B. (2007) · Physica Scripta · doi:10.1088/0031-8949/2007/t129/014 · Cited by 195
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Jeong, S. S., Lim, Y. T., Choi, Y. J., Cho, G. B., Kim, K. W., Ahn, H. J., & Cho, K. K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.108 · Cited by 184
Cell energy density and electrolyte/sulfur ratio in Li–S cells
Hagen, M., Fanz, P., & Tübke, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.018 · Cited by 177
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Brückner, J., Thieme, S., Grossmann, H. T., Dörfler, S., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.143 · Cited by 163
Electrochemical properties of lithium–sulfur batteries
Jin, B., Kim, J., & Gu, H.-B. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00113-7 · Cited by 148
Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries
Barchasz, C., Leprêtre, J., Patoux, S., et al. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.11.001 · Cited by 143
Improvement of cycle property of sulfur electrode for lithium/sulfur battery
Choi, Y., Kim, K.-W., Ahn, H., & Ahn, J. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.02.098 · Cited by 141
Discharge behavior of lithium/sulfur cell with TEGDME based electrolyte at low temperature
Ryu, H., Ahn, H., Kim, K.-W., Ahn, J., Cho, K.-K., Nam, T., Kim, J.-U., & Cho, G. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.061 · Cited by 136
Polymer lithium cells with sulfur composites as cathode materials
Wang, J., Liu, L., Ling, Z., et al. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00258-5 · Cited by 136
Hu, J. J., Long, G., Liu, S. H., Li, G., & Gao, X. (2014) · Chemical Communications · doi:10.1039/c4cc06666a · Cited by 128
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
Cheon, S.-E., Cho, J., Ko, K.-S., et al. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1511187 · Cited by 123
The electrochemical performance of lithium–sulfur batteries with LiClO4 DOL/DME electrolyte
Wang, W., Wang, Y., Huang, Y., et al. (2009) · Journal of Applied Electrochemistry · doi:10.1007/s10800-009-9978-z · Cited by 114
Key Parameters Governing the Energy Density of Rechargeable Li/S Batteries
Gao, J., & Abruña, H. D. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5001819 · Cited by 113
A lithium sulfur battery with high power density
Nagata, H., & Chikusa, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.106 · Cited by 107
Lee, J. T., Zhao, Y., Kim, H., Cho, W. I., & Yushin, G. N. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.003 · Cited by 85
Barchasz, C., Leprêtre, J., Patoux, S., & Alloin, F. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.022303jes · Cited by 84
Importance of ‘unimportant’ experimental parameters in Li–S battery development
Trabesinger, S., & Novák, P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.095 · Cited by 80
Self-citationPreparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder
Sun, J., Huang, Y., Wang, W., et al. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.04.016 · Cited by 77
Kim, S., Jung, Y., & Park, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.08.028 · Cited by 73
Zhang, Y., Zhao, Y. H., Bakenov, Z., Babaa, M., Konarov, A., Ding, C., & Chen, P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.068308jes · Cited by 71
Improve Rate Capability of the Sulfur Cathode Using a Gelatin Binder
Wang, Q., Wang, W., Huang, Y., et al. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3583375 · Cited by 69
Kulisch, J., Sommer, H., Brezesinski, T., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02220c · Cited by 64
Raiß, C., Peppler, K., Janek, J., & Adelhelm, P. (2014) · Carbon · doi:10.1016/j.carbon.2014.07.065 · Cited by 44
Effect of sulfur loading on energy density of lithium sulfur batteries
Kang, S.-H., Zhao, X., Manuel, J., et al. (2014) · physica status solidi (a) · doi:10.1002/pssa.201330569 · Cited by 43
On the Electrode Potentials in Lithium-Sulfur Batteries and Their Solvent-Dependence
Schneider, H., Gollub, C., Weiß, T., et al. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0991409jes · Cited by 37
Peng, L.-L., Liu, G.-B., Wang, Y., et al. (2013) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-013-2337-3 · Cited by 17
Cited by
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Material design and engineering of next-generation flow-battery technologies
Park, M., Ryu, J., Wang, W., & Cho, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.80 · Cited by 841
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Emerging of Heterostructure Materials in Energy Storage: A Review
Li, Y., Zhang, J., Chen, Q., Xia, X., & Chen, M. (2021) · Advanced Materials · doi:10.1002/adma.202100855 · Cited by 794
Conversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
Metadata
- Authors
- Urbonaite, S., Poux, T., & Novák, P.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-21
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2169411437
- Cited by
- 406
- References
- 112
- FWCI
- 28.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.