The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Abstract
The ever‐growing portable electronics and electric vehicle markets heavily influence the technological revolution of lithium batteries (LBs) toward higher energy densities for longer standby times or driving range. Thick electrode designs can substantially improve the electrode active material loading by minimizing the inactive component ratio at the device level, providing a great platform for enhancing the overall energy density of LBs. However, extensive efforts are still needed to address the challenges that accompany the increase in electrode thickness, not limited to sluggish charge kinetics and electrode mechanical instability. In this review, the principles and the recent developments in the fabrication of thick electrodes that focus on low‐tortuosity structural designs for rapid charge transport and integrated cell configuration for improved energy density, cell stability, and durability are summarized. Advanced thick electrode designs for application in emerging battery chemistries such as lithium metal electrodes, solid state electrolytes, and lithium–air batteries are also discussed with a perspective on their future opportunities and challenges. Finally, suggestions on the future directions of thick electrode battery development and research are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Single-shell carbon nanotubes of 1-nm diameter
Iijima, S., & Ichihashi, T. (1993) · Nature · doi:10.1038/363603a0 · Cited by 9,012
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Self-citationA Reversible and Higher-Rate Li-O 2 Battery
Peng, Z., Freunberger, S. A., Chen, Y., & Bruce, P. G. (2012) · Science · doi:10.1126/science.1223985 · Cited by 1,915
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Self-citationYang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage
Sun, H., Mei, L., Liang, J., Zhao, Z., Lee, C., Fei, H., Ding, M., Lau, J., Li, M., Wang, C., et al. (2017) · Science · doi:10.1126/science.aam5852 · Cited by 1,461
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
Holey graphene frameworks for highly efficient capacitive energy storage
Xu, Y., Lin, Z., Zhong, X., Huang, X., Weiss, N. O., Huang, Y., & Duan, X. (2014) · Nature Communications · doi:10.1038/ncomms5554 · Cited by 1,376
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Graphene-based nanomaterials for energy storage
Pumera, M. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00295j · Cited by 1,293
Graphene for batteries, supercapacitors and beyond
El-Kady, M. F., Shao, Y., & Kaner, R. B. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.33 · Cited by 1,262
Carbon nanotubes for lithium ion batteries
Landi, B. J., Ganter, M. J., Cress, C. D., DiLeo, R. A., & Raffaelle, R. P. (2009) · Energy & Environmental Science · doi:10.1039/b904116h · Cited by 1,229
Chen, C., Wen, Y., Hu, X., Ji, X., Yan, M., Mai, L., Hu, P., Shan, B., & Huang, Y. (2015) · Nature Communications · doi:10.1038/ncomms7929 · Cited by 1,155
Self-citationCorrelations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes
Li, J., Ma, P. C., Chow, W. S., To, C. K., Tang, B. Z., & Kim, J. ‐. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700065 · Cited by 1,104
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Lin, D., Liu, W., Liu, Y., Lee, H. R., Hsu, P.-C., Liu, K., & Cui, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04117 · Cited by 1,012
A High‐Performance Self‐Regenerating Solar Evaporator for Continuous Water Desalination
Kuang, Y., Chen, C., He, S., Hitz, E. M., Wang, Y., Gan, W., Mi, R., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201900498 · Cited by 1,005
Self-citationIonic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Self-citationKhurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Highly Flexible and Efficient Solar Steam Generation Device
Chen, C., Li, Y., Song, J., Yang, Z., Kuang, Y., Hitz, E., Jia, C., Gong, A., Jiang, F., Zhu, J. Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701756 · Cited by 868
Self-citationPrestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Zhang, J., Zhao, N., Zhang, M., Li, Y., Chu, P. K.-H., Guo, X., Di, Z., Wang, X., & Li, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.002 · Cited by 818
Aqueous Li-ion battery enabled by halogen conversion–intercalation chemistry in graphite
Yang, C., Chen, J., Ji, X., Pollard, T. P., Lü, X., Sun, C.-J., Hou, S., Liu, Q., Liu, C., Qing, T., et al. (2019) · Nature · doi:10.1038/s41586-019-1175-6 · Cited by 806
Hierarchical 3D electrodes for electrochemical energy storage
Sun, H., Zhu, J., Baumann, D., Peng, L., Xu, Y., Shakir, I., Huang, Y., & Duan, X. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0069-9 · Cited by 805
Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates
Li, N., Chen, Z., Ren, W., Li, F., & Cheng, H.-M. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1210072109 · Cited by 794
Nanocellulose: a promising nanomaterial for advanced electrochemical energy storage
Chen, W., Yu, H., Lee, S.-Y., Wei, T., Li, J., & Fan, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00790f · Cited by 766
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Self-citationProtected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Self-citationLu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Tree‐Inspired Design for High‐Efficiency Water Extraction
Zhu, M., Li, Y., Chen, G., Jiang, F., Yang, Z., Luo, X., Wang, Y., Lacey, S. D., Dai, J., Wang, C., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704107 · Cited by 694
Self-citationWang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Self-citationMagnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Self-citationHigh lithium ionic conductivity in the garnet-type oxide Li7−X La3(Zr2−X, NbX)O12 (X=0–2)
Ohta, S., Kobayashi, T., & Asaoka, T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.089 · Cited by 665
Folded Structured Graphene Paper for High Performance Electrode Materials
Liu, F., Song, S., Xue, D., & Zhang, H. (2012) · Advanced Materials · doi:10.1002/adma.201104691 · Cited by 657
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Self-citationReviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Electrochemical Properties of Graphene Paper Electrodes Used in Lithium Batteries
Wang, C., Li, D., Too, C. O., & Wallace, G. G. (2009) · Chemistry of Materials · doi:10.1021/cm900764n · Cited by 563
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Song, M.-K., Park, S., Alamgir, F. M., Cho, J., & Liu, M. (2011) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2011.06.001 · Cited by 540
Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries
Chen, S., Niu, C., Lee, H., Li, Q., Yu, L., Xu, W., Zhang, J.-G., Dufek, E. J., Whittingham, M. S., Meng, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.02.004 · Cited by 531
Tortuosity Anisotropy in Lithium‐Ion Battery Electrodes
Ebner, M., Chung, D., García, R. E., & Wood, V. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301278 · Cited by 495
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
A review of cathode materials and structures for rechargeable lithium–air batteries
Ma, Z., Yuan, X., Li, L., Ma, Z.-F., Wilkinson, D. P., Zhang, L., & Zhang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00838g · Cited by 485
Xia, C., Kwok, C. Y., & Nazar, L. F. (2018) · Science · doi:10.1126/science.aas9343 · Cited by 480
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Self-citationHigh-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Self-citationHierarchically Porous Carbon Plates Derived from Wood as Bifunctional ORR/OER Electrodes
Peng, X., Zhang, L., Chen, Z., Zhong, L., Zhao, D., Chi, X., Zhao, X., Li, L., Lu, X., Leng, K., et al. (2019) · Advanced Materials · doi:10.1002/adma.201900341 · Cited by 462
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Ultrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery Electrodes
Ji, H., Zhang, L., Pettes, M. T., Li, H., Chen, S., Shi, L., Piner, R., & Ruoff, R. S. (2012) · Nano Letters · doi:10.1021/nl300528p · Cited by 410
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Nanocellulose toward Advanced Energy Storage Devices: Structure and Electrochemistry
Chen, C., & Hu, L. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00391 · Cited by 386
Self-citationThree‐Dimensional Porous Copper–Tin Alloy Electrodes for Rechargeable Lithium Batteries
Shin, H. ‐., & Liu, M. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200305165 · Cited by 366
Hybrid Electrolytes with Controlled Network Structures for Lithium Metal Batteries
Pan, Q., Smith, D. M., Qi, H., Wang, S., & Li, C. Y. (2015) · Advanced Materials · doi:10.1002/adma.201502059 · Cited by 345
Highly Rechargeable Lithium‐CO2 Batteries with a Boron‐ and Nitrogen‐Codoped Holey‐Graphene Cathode
Qie, L., Lin, Y., Connell, J. W., Xu, J., & Dai, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701826 · Cited by 337
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
A dendrite-suppressing composite ion conductor from aramid nanofibres
Tung, S.-O., Ho, S., Yang, M., Zhang, R., & Kotov, N. A. (2015) · Nature Communications · doi:10.1038/ncomms7152 · Cited by 336
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
Self-citationShen, F., Luo, W., Dai, J., Yao, Y., Zhu, M., Hitz, E., Tang, Y., Chen, Y., Sprenkle, V. L., Li, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600377 · Cited by 318
Self-citationBae, C., Erdonmez, C. K., Halloran, J. W., & Chiang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201204055 · Cited by 307
Wood‐Inspired High‐Performance Ultrathick Bulk Battery Electrodes
Lu, L., Lu, Y., Xiao, Z., Zhang, T., Zhou, F., Ma, T., Ni, Y., Yao, H., Yu, S., & Cui, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706745 · Cited by 304
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T., McOwen, D., Dai, J., Luo, W., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 303
Self-citationHighly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors
Chen, C., Zhang, Y., Li, Y., Kuang, Y., Song, J., Luo, W., Wang, Y., Yao, Y., Pastel, G., Xie, J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700595 · Cited by 297
Self-citationTowards Ultrathick Battery Electrodes: Aligned Carbon Nanotube – Enabled Architecture
Evanoff, K., Khan, J., Balandin, A. A., Magasinski, A., Ready, W. J., Fuller, T. F., & Yushin, G. (2012) · Advanced Materials · doi:10.1002/adma.201103044 · Cited by 286
Cellulose‐based Supercapacitors: Material and Performance Considerations
Wang, Z., Tammela, P., Strømme, M., & Nyholm, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700130 · Cited by 279
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
3D Wettable Framework for Dendrite‐Free Alkali Metal Anodes
Zhang, Y., Wang, C., Pastel, G., Kuang, Y., Xie, H., Li, Y., Liu, B., Luo, W., Chen, C., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800635 · Cited by 265
Self-citationBuschmann, H., Berendts, S., Mogwitz, B., & Janek, J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.094 · Cited by 252
A carbon-based 3D current collector with surface protection for Li metal anode
Zhang, Y., Liu, B., Hitz, E., Luo, W., Yao, Y., Li, Y., Dai, J., Chen, C., Wang, Y., Yang, C., et al. (2017) · Nano Research · doi:10.1007/s12274-017-1461-2 · Cited by 252
Self-citationRechargeable Li–CO2 batteries with carbon nanotubes as air cathodes
Zhang, X., Zhang, Q., Zhang, Z., Chen, Y., Xie, Z., Wei, J., & Zhou, Z. (2015) · Chemical Communications · doi:10.1039/c5cc05767a · Cited by 250
Kuang, Y., Chen, C., Pastel, G., Li, Y., Song, J., Mi, R., Kong, W., Liu, B., Jiang, Y., Yang, K., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802398 · Cited by 250
Self-citationLee, D. J., Lee, H., Kim, Y., Park, J., & Kim, H. (2016) · Advanced Materials · doi:10.1002/adma.201503169 · Cited by 244
Nanoporous Polymer‐Ceramic Composite Electrolytes for Lithium Metal Batteries
Tu, Z., Kambe, Y., Lu, Y., & Archer, L. A. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300654 · Cited by 243
Wood‐Derived Hierarchically Porous Electrodes for High‐Performance All‐Solid‐State Supercapacitors
Wang, Y., Lin, X., Liu, T., Chen, H., Chen, S., Jiang, Z., Liu, J., Huang, J., & Liu, M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806207 · Cited by 239
Nanostructured CuO directly grown on copper foam and their supercapacitance performance
Li, Y., Chang, S., Liu, X., Huang, J., Yin, J., Wang, G., & Cao, D. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.127 · Cited by 230
Zhu, Y., Fan, X., Suo, L., Luo, C., Gao, T., & Wang, C. (2016) · ACS Nano · doi:10.1021/acsnano.5b07081 · Cited by 225
Hierarchically Porous, Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries
Song, H., Xu, S., Li, Y., Dai, J., Gong, A., Zhu, M., Zhu, C., Chen, C., Chen, Y., Yao, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701203 · Cited by 215
Self-citationHu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Three-Dimensional, Solid-State Mixed Electron–Ion Conductive Framework for Lithium Metal Anode
Xu, S., McOwen, D. W., Wang, C., Zhang, L., Luo, W., Chen, C., Li, Y., Gong, Y., Dai, J., Kuang, Y., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01295 · Cited by 214
Self-citationWang, J., Sun, Q., Gao, X., Wang, C., Li, W., Holness, F. B., Zheng, M. L., Li, R., Price, A. D., Sun, X., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14797 · Cited by 211
A review of high energy density lithium–air battery technology
Rahman, M. A., Wang, X., & Wen, C. (2014) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0620-8 · Cited by 208
Li, Y., Fu, K. “., Chen, C., Luo, W., Gao, T., Xu, S., Dai, J., Pastel, G., Wang, Y., Liu, B., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01172 · Cited by 184
Self-citationTool for Tortuosity Estimation in Lithium Ion Battery Porous Electrodes
Ebner, M., & Wood, V. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111502jes · Cited by 181
Werner, J. G., Rodríguez-Calero, G. G., Abruña, H. D., & Wiesner, U. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03571c · Cited by 181
Li, H., Peng, L., Wu, D., Wu, J., Zhu, Y., & Hu, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802930 · Cited by 180
Ma, L., Yu, T., Tzoganakis, E., Amine, K., Wu, T., Chen, Z., & Lu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800348 · Cited by 178
Qiao, Y., Liu, Y., Chen, C., Xie, H., Yao, Y., He, S., Ping, W., Liu, B., & Hu, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805899 · Cited by 178
Self-citationDresselhaus, M. S., Dresselhaus, G., Eklund, P. C., & Rao, A. M. (2000) · Physics and Chemistry of Materials with Low-Dimensional Structures · doi:10.1007/978-94-011-4038-6_9 · Cited by 169
Bioinspired Solar‐Heated Carbon Absorbent for Efficient Cleanup of Highly Viscous Crude Oil
Kuang, Y., Chen, C., Chen, G., Pei, Y., Pastel, G., Jia, C., Song, J., Mi, R., Yang, B., Das, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900162 · Cited by 162
Self-citationElango, R., Demortière, A., Andrade, V. D., Morcrette, M., & Seznéc, V. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703031 · Cited by 161
Coral-like directional porosity lithium ion battery cathodes by ice templating
Huang, C., & Grant, P. S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05049j · Cited by 152
Natural cellulose as binder for lithium battery electrodes
Jeong, S., Böckenfeld, N., Balducci, A., Winter, M., & Passerini, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.102 · Cited by 151
Flexible lithium–CO 2 battery with ultrahigh capacity and stable cycling
Xu, S., Chen, C., Kuang, Y., Song, J., Gan, W., Liu, B., Hitz, E., Connell, J. W., Lin, Y., & Hu, L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01468j · Cited by 150
Self-citationUltrahigh-Capacity Lithium–Oxygen Batteries Enabled by Dry-Pressed Holey Graphene Air Cathodes
Lin, Y., Moitoso, B., Martinez‐Martinez, C., Walsh, E. D., Lacey, S. D., Kim, J.-W., Dai, L., Hu, L., & Connell, J. W. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00872 · Cited by 148
Self-citation3D lithium metal anodes hosted in asymmetric garnet frameworks toward high energy density batteries
Liu, B., Zhang, L., Xu, S., McOwen, D. W., Gong, Y., Yang, C., Pastel, G., Xie, H., Fu, K. K., Dai, J., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.04.015 · Cited by 147
Self-citationMaterials challenges in rechargeable lithium-air batteries
Kwabi, D. G., Ortiz‐Vitoriano, N., Freunberger, S. A., Chen, Y., Imanishi, N., Bruce, P. G., & Shao‐Horn, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.87 · Cited by 144
Hetero‐Nanonet Rechargeable Paper Batteries: Toward Ultrahigh Energy Density and Origami Foldability
Cho, S., Choi, K., Yoo, J., Kim, J., Lee, Y., Chun, S., Park, S., Choi, D., Wu, Q., Lee, S., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502833 · Cited by 140
All-in-one lithium-sulfur battery enabled by a porous-dense-porous garnet architecture
Xu, S., McOwen, D. W., Zhang, L., Hitz, G. T., Wang, C., Ma, Z., Chen, C., Luo, W. H., Dai, J., Kuang, Y., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.08.009 · Cited by 139
Self-citationNitrogen-Doped Holey Graphene for High-Performance Rechargeable Li–O2 Batteries
Shui, J., Lin, Y., Connell, J. W., Xu, J., Fan, X., & Dai, L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00128 · Cited by 129
Sandwich, Vertical‐Channeled Thick Electrodes with High Rate and Cycle Performance
Zhao, Z., Sun, M., Chen, W., Liu, Y., Zhang, L., Dongfang, N., Ruan, Y., Zhang, J., Wang, P., Dong, L., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809196 · Cited by 126
Xu, J., Lin, Y., Connell, J. W., & Dai, L. (2015) · Small · doi:10.1002/smll.201501848 · Cited by 125
Heterolayered, One-Dimensional Nanobuilding Block Mat Batteries
Choi, K.-H., Cho, S., Chun, S., Yoo, J., Lee, C. K., Kim, W., Wu, Q., Park, S.-B., Choi, D., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl5024029 · Cited by 121
2D-Pnictogens: alloy-based anode battery materials with ultrahigh cycling stability
Beladi‐Mousavi, S. M., & Pumera, M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00425k · Cited by 116
Zhu, J., Yu, S., Wang, T., Sun, H., Zhao, Z., Mei, L., Zheng, F., Xu, Z. Q., Shakir, I., Huang, Y., et al. (2016) · Nature Communications · doi:10.1038/ncomms13432 · Cited by 96
Aqueous processing of cellulose based paper-anodes for flexible Li-ion batteries
Jabbour, L., Destro, M., Gerbaldi, C., Chaussy, D., Penazzi, N., & Beneventi, D. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15117k · Cited by 90
Walsh, E. D., Han, X., Lacey, S. D., Kim, J.-W., Connell, J. W., Hu, L., & Lin, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09951 · Cited by 81
Self-citationLuo, J., Yao, X., Yang, L., Han, Y., Chen, L., Geng, X., Vattipalli, V., Dong, Q., Fan, W., Wang, D., et al. (2017) · Nano Research · doi:10.1007/s12274-017-1660-x · Cited by 74
Electrochemical Characterization of High Energy Density Graphite Electrodes Made by Freeze-Casting
Amin, R., Delattre, B., Tomsia, A. P., & Chiang, Y. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00962 · Cited by 73
Nanocellulose Structured Paper-Based Lithium Metal Batteries
Wang, Z., Pan, R., Sun, R., Edström, K., Strømme, M., & Nyholm, L. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00961 · Cited by 71
Columnar order in jammed LiFePO4 cathodes: ion transport catastrophe and its mitigation
Smith, K. C., Mukherjee, P. P., & Fisher, T. S. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40135e · Cited by 42
Research works printed but not linked: 22
- 10.1002/aenm.201702397 · doi:10.1002/aenm.201702397
- 10.1126/science.aan1472 · doi:10.1126/science.aan1472
- 10.1002/aenm.201100056 · doi:10.1002/aenm.201100056
- 10.1039/C4NR00326H · doi:10.1039/c4nr00326h
- 10.1002/aenm.201301718 · doi:10.1002/aenm.201301718
- 10.1038/s41467-017-02808-2 · doi:10.1038/s41467-017-02808-2
- 10.1016/j.nanoen.2016.11.005 · doi:10.1016/j.nanoen.2016.11.005
- 10.1021/acsaem.9b00066 · doi:10.1021/acsaem.9b00066
- 10.1039/c3ta01532g · doi:10.1039/c3ta01532g
- 10.6028/NIST.SP.1192 · doi:10.6028/nist.sp.1192
- 10.1149/2.117309jes · doi:10.1149/2.117309jes
- 10.1021/acs.inorgchem.5b00184 · doi:10.1021/acs.inorgchem.5b00184
- 10.1016/j.elecom.2013.04.004 · doi:10.1016/j.elecom.2013.04.004
- 10.1149/2.036310jes · doi:10.1149/2.036310jes
- 10.1149/1.3474232 · doi:10.1149/1.3474232
- 10.1002/adma.201802068 · doi:10.1002/adma.201802068
- 10.1021/acs.chemmater.7b02339 · doi:10.1021/acs.chemmater.7b02339
- 10.1016/j.ssi.2013.09.024 · doi:10.1016/j.ssi.2013.09.024
- 10.1039/C7EE01004D · doi:10.1039/c7ee01004d
- 10.1016/j.carbon.2013.05.066 · doi:10.1016/j.carbon.2013.05.066
- 10.1002/adma.201704907 · doi:10.1002/adma.201704907
- 10.1002/aenm.201802964 · DOI
Cited by
Carbon materials for ion-intercalation involved rechargeable battery technologies
Wang, G., Yu, M., & Feng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00187b · Cited by 536
Li, P., Kim, H., Myung, S.-T., & Sun, Y.-K. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.028 · Cited by 535
Eshetu, G. G., Zhang, H., Judez, X., Adenusi, H., Armand, M., Passerini, S., & Figgemeier, E. (2021) · Nature Communications · doi:10.1038/s41467-021-25334-8 · Cited by 485
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Cheng, Z., Jiang, H., Zhang, X., Cheng, F., Wu, M., & Zhang, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301109 · Cited by 364
Metadata
- Authors
- Kuang, Y., Chen, C., Kirsch, D., & Hu, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-07-24
- Volume
- 9
- Issue
- 33
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2963743648
- Cited by
- 842
- References
- 135
- FWCI
- 24.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.