Structural Evolution During Perovskite Crystal Formation and Degradation: In Situ and Operando X‐Ray Diffraction Studies
The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Abstract
This review provides an update on the progress in understanding formation and degradation mechanisms in halide perovskites for photovoltaic applications, as supported by in situ and operando X‐ray scattering techniques. The value of these real‐time analyses is particularly high for gaining insights into the structural evolution during crystal formation and decomposition upon exposure to external stress factors. This type of analysis reveals the pathways between starting and end points of a process rather than being limited to comparing states before and after the process. Special attention is put on the successful efforts toward upscaling including deposition techniques that are compatible to roll‐to‐roll processing. These processes are realized using fast annealing procedures. The development of these processes strongly benefited from in situ studies exploring the direct transition from precursor to perovskite without going through observable crystalline intermediate phases. A particular focus of this review is the benefit of using in situ and operando X‐ray scattering techniques to better understand and ultimately improve device stability. The difference between structural stability of thin films and structural stability under device operation is highlighted, convincingly demonstrating the indispensability of operando studies.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional in situ techniques, such as synchrotron X-ray spectroscopy, offer valuable chemical insight but lack the spatial resolution to capture localized degradation phenomena in nanostructured devices17–19”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [17]
In the citing paper
“Under bias, inefficient hole injection and charge accumulation at the HTL interface intensify local electric fields and may promote halide ion redistribution, oxidation (particularly of Cl−) or volatilization17,37,49”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [17]
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Thermochromic halide perovskite solar cells
Lin, J., Lai, M., Dou, L., Kley, C. S., Chen, H., Peng, F., Sun, J., Lu, D., Hawks, S. A., Xie, C., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0006-0 · Cited by 853
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Weber, D. (1978) · Zeitschrift für Naturforschung B · doi:10.1515/znb-1978-1214 · Cited by 716
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells
Wang, R., Xue, J., Meng, L., Lee, J.-W., Zhao, Z., Sun, P., Cai, L., Huang, T., Wang, Z., Wang, Z.-K., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.005 · Cited by 641
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Weller, M. T., Weber, O. J., Henry, P. F., Di Pumpo, A. M., & Hansen, T. C. (2015) · Chemical Communications · doi:10.1039/c4cc09944c · Cited by 614
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Whitfield, P. S., Herron, N., Guise, W. E., Page, K., Cheng, Y. Q., Milas, I., & Crawford, M. K. (2016) · Scientific Reports · doi:10.1038/srep35685 · Cited by 586
Quarti, C., Mosconi, E., Ball, J. M., D'Innocenzo, V., Tao, C., Pathak, S., Snaith, H. J., Petrozza, A., & De Angelis, F. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02925b · Cited by 521
Structural Study on Cubic–Tetragonal Transition of CH3NH3PbI3
Kawamura, Y., Mashiyama, H., & Hasebe, K. (2002) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.71.1694 · Cited by 510
Lattice strain causes non-radiative losses in halide perovskites
Jones, T. W., Osherov, A., Alsari, M., Sponseller, M., Duck, B. C., Jung, Y.-K., Settens, C., Niroui, F., Brenes, R., Stan, C. V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02751j · Cited by 508
Moore, D. T., Sai, H., Tan, K. W., Smilgies, D.-M., Zhang, W., Snaith, H. J., Wiesner, U., & Estroff, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512117e · Cited by 380
Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Kempe, M. D., Jorgensen, G. J., Terwilliger, K. M., McMahon, T. J., Kennedy, C. E., & Borek, T. T. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.009 · Cited by 312
Roll-to-Roll Printing of Perovskite Solar Cells
Dou, B., Whitaker, J. B., Bruening, K., Moore, D. T., Wheeler, L. M., Ryter, J., Breslin, N. J., Berry, J. J., Garner, S. M., Barnes, F. S., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01556 · Cited by 304
Knop, O., Wasylishen, R. E., White, M. A., Cameron, T. S., & Oort, M. J. M. V. (1990) · Canadian Journal of Chemistry · doi:10.1139/v90-063 · Cited by 286
Chloride in Lead Chloride-Derived Organo-Metal Halides for Perovskite-Absorber Solar Cells
Unger, E. L., Bowring, A. R., Tassone, C. J., Pool, V. L., Gold-Parker, A., Cheacharoen, R., Stone, K. H., Hoke, E. T., Toney, M. F., & McGehee, M. D. (2014) · Chemistry of Materials · doi:10.1021/cm503828b · Cited by 281
Jacobsson, T. J., Schwan, L. J., Ottosson, M., Hagfeldt, A., & Edvinsson, T. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01481 · Cited by 280
Phase Transition Control for High-Performance Blade-Coated Perovskite Solar Cells
Li, J., Munir, R., Fan, Y., Niu, T., Liu, Y., Zhong, Y., Yang, Z., Tian, Y., Liu, B., Sun, J., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.011 · Cited by 260
The Many Faces of Mixed Ion Perovskites: Unraveling and Understanding the Crystallization Process
Gratia, P., Zimmermann, I., Schouwink, P., Yum, J.-H., Audinot, J.-N., Sivula, K., Wirtz, T., & Nazeeruddin, M. K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00981 · Cited by 258
Kong, W., Ye, Z., Qi, Z., Zhang, B., Wang, M., Rahimi-Iman, A., & Wu, H. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp02605a · Cited by 253
Sharenko, A., & Toney, M. F. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10723 · Cited by 242
Environmental Effects on the Photophysics of Organic–Inorganic Halide Perovskites
Galisteo-López, J. F., Anaya, M., Calvo, M. E., & Míguez, H. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00785 · Cited by 238
Liu, C., Li, W., Li, H., Wang, H., Zhang, C., Yang, Y., Gao, X., Xue, Q., Yip, H., Fan, J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803572 · Cited by 231
Zhu, Z., Hadjiev, V. G., Rong, Y., Guo, R., Cao, B., Tang, Z., Qin, F., Li, Y., Wang, Y., Hao, F., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02883 · Cited by 230
Nenon, D. P., Christians, J. A., Wheeler, L. M., Blackburn, J. L., Sanehira, E. M., Dou, B., Olsen, M. L., Zhu, K., Berry, J. J., & Luther, J. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01047d · Cited by 221
Manipulating the Mixed‐Perovskite Crystallization Pathway Unveiled by In Situ GIWAXS
Qin, M., Tse, K., Lau, T., Li, Y., Su, C., Yang, G., Chen, J., Zhu, J., Jeng, U., Li, G., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901284 · Cited by 221
Thermal engineering of FAPbI3 perovskite material via radiative thermal annealing and in situ XRD
Pool, V. L., Dou, B., Van Campen, D. G., Klein-Stockert, T. R., Barnes, F. S., Shaheen, S. E., Ahmad, M. I., van Hest, M. F. A. M., & Toney, M. F. (2017) · Nature Communications · doi:10.1038/ncomms14075 · Cited by 219
Blade-Coated Hybrid Perovskite Solar Cells with Efficiency > 17%: An In Situ Investigation
Zhong, Y., Munir, R., Li, J., Tang, M.-C., Niazi, M. R., Smilgies, D.-M., Zhao, K., & Amassian, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00428 · Cited by 219
Moisture transport, adhesion, and corrosion protection of PV module packaging materials
JORGENSEN, G., TERWILLIGER, K., DELCUETO, J., GLICK, S., KEMPE, M., PANKOW, J., PERN, F., & MCMAHON, T. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.04.003 · Cited by 203
Materials toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies
Wang, F., Cao, Y., Chen, C., Chen, Q., Wu, X., Li, X., Qin, T., & Huang, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803753 · Cited by 203
Munir, R., Sheikh, A. D., Abdelsamie, M., Hu, H., Yu, L., Zhao, K., Kim, T., Tall, O. E., Li, R., Smilgies, D., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604113 · Cited by 199
Tong, C.-J., Geng, W., Tang, Z.-K., Yam, C.-Y., Fan, X.-L., Liu, J., Lau, W.-M., & Liu, L.-M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01544 · Cited by 198
Thermochromic Perovskite Inks for Reversible Smart Window Applications
De Bastiani, M., Saidaminov, M. I., Dursun, I., Sinatra, L., Peng, W., Buttner, U., Mohammed, O. F., & Bakr, O. M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05112 · Cited by 172
Insights into operational stability and processing of halide perovskite active layers
Schelhas, L. T., Li, Z., Christians, J. A., Goyal, A., Kairys, P., Harvey, S. P., Kim, D. H., Stone, K. H., Luther, J. M., Zhu, K., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03051k · Cited by 171
Self-citationThermal Stability of Mixed Cation Metal Halide Perovskites in Air
Tan, W., Bowring, A. R., Meng, A. C., McGehee, M. D., & McIntyre, P. C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15263 · Cited by 161
Pham, N. D., Tiong, V. T., Chen, P., Wang, L., Wilson, G. J., Bell, J. M., & Wang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta11139d · Cited by 158
Wheeler, L. M., Moore, D. T., Ihly, R., Stanton, N. J., Miller, E. M., Tenent, R. C., Blackburn, J. L., & Neale, N. R. (2017) · Nature Communications · doi:10.1038/s41467-017-01842-4 · Cited by 156
Photovoltaic behaviour of lead methylammonium triiodide perovskite solar cells down to 80 K
Zhang, H., Qiao, X., Shen, Y. F., Moehl, T., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02206a · Cited by 153
Hoye, R. L. Z., Schulz, P., Schelhas, L. T., Holder, A. M., Stone, K. H., Perkins, J. D., Vigil-Fowler, D., Siol, S., Scanlon, D. O., Zakutayev, A., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03852 · Cited by 142
Self-citationTracking Structural Phase Transitions in Lead‐Halide Perovskites by Means of Thermal Expansion
Keshavarz, M., Ottesen, M., Wiedmann, S., Wharmby, M. T., Küchler, R., Yuan, H., Debroye, E., Steele, J. A., Martens, J. A., Hussey, N. E., et al. (2019) · Advanced Materials · doi:10.1002/adma.201900521 · Cited by 135
Fabrication of Efficient and Stable CsPbI 3 Perovskite Solar Cells through Cation Exchange Process
Lau, C. F. J., Wang, Z., Sakai, N., Zheng, J., Liao, C., Green, M. A., Huang, S., Snaith, H. J., & Ho-Baillie, A. W. Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901685 · Cited by 130
Sánchez, S., Neururer, C., Grobéty, B., Phung, N., Steiner, U., Saliba, M., & Abate, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802060 · Cited by 129
Lehmann, F., Franz, A., Többens, D. M., Levcenco, S., Unold, T., Taubert, A., & Schorr, S. (2019) · RSC Advances · doi:10.1039/c8ra09398a · Cited by 123
Performance boosting strategy for perovskite light-emitting diodes
Sim, K., Jun, T., Bang, J., Kamioka, H., Kim, J., Hiramatsu, H., & Hosono, H. (2019) · Applied Physics Reviews · doi:10.1063/1.5098871 · Cited by 116
Transformation from crystalline precursor to perovskite in PbCl2-derived MAPbI3
Stone, K. H., Gold‐Parker, A., Pool, V. L., Unger, E., Bowring, A. R., McGehee, M. D., Toney, M. F., & Tassone, C. J. (2018) · Nature Communications · doi:10.1038/s41467-018-05937-4 · Cited by 110
Recent progress in organometal halide perovskite photodetectors
Wang, X., Li, M., Zhang, B., Wang, H., Zhao, Y., & Wang, B. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.10.027 · Cited by 106
Shedding Light on the Moisture Stability of 3D/2D Hybrid Perovskite Heterojunction Thin Films
Schlipf, J., Hu, Y., Pratap, S., Bießmann, L., Hohn, N., Porcar, L., Bein, T., Docampo, P., & Müller-Buschbaum, P. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00005 · Cited by 92
Petrus, M. L., Hu, Y., Moia, D., Calado, P., Leguy, A. M. A., Barnes, P. R. F., & Docampo, P. (2016) · ChemSusChem · doi:10.1002/cssc.201600999 · Cited by 91
Alsari, M., Bikondoa, O., Bishop, J. E., Abdi‐Jalebi, M., Özer, L. Y., Hampton, M., Thompson, P., Hörantner, M. T., Mahesh, S., Greenland, C., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee03013d · Cited by 87
Parrott, E. S., Green, T., Milot, R. L., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802803 · Cited by 84
Meng, K., Wang, X., Xu, Q., Li, Z., Liu, Z., Wu, L., Hu, Y., Liu, N., & Chen, G. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902319 · Cited by 83
Hoque, M. N. F., Islam, N., Li, Z., Ren, G., Zhu, K., & Fan, Z. (2016) · ChemSusChem · doi:10.1002/cssc.201600949 · Cited by 82
In Situ Identification of Photo- and Moisture-Dependent Phase Evolution of Perovskite Solar Cells
Chen, B., Lin, J.-T., Suen, N., Tsao, C.-W., Chu, T.-C., Hsu, Y., Chan, T., Chan, Y., Yang, J., Chiu, C., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00698 · Cited by 81
Long, M., Zhang, T., Liu, M., Chen, Z., Wang, C., Xie, W., Xie, F., Chen, J., Li, G., & Xu, J. (2018) · Advanced Materials · doi:10.1002/adma.201801562 · Cited by 75
Osherov, A., Hutter, E. M., Gal̷kowski, K., Brenes, R., Maude, D. K., Nicholas, R. J., Płochocka, P., Bulović, V., Savenije, T. J., & Stranks, S. D. (2016) · Advanced Materials · doi:10.1002/adma.201604019 · Cited by 74
Scalable Fabrication of Perovskite Solar Cells to Meet Climate Targets
Brüning, K., Dou, B., Simonaitis, J., Lin, Y.-Y., van Hest, M. F. A. M., & Tassone, C. J. (2018) · Joule · doi:10.1016/j.joule.2018.09.014 · Cited by 71
Annealing Induced Re-crystallization in CH3NH3PbI3−xClx for High Performance Perovskite Solar Cells
Yang, Y., Feng, S., Li, M., Xu, W., Yin, G., Wang, Z., Sun, B., & Gao, X. (2017) · Scientific Reports · doi:10.1038/srep46724 · Cited by 67
Li, J., Shen, Y., Hacke, P. L., & Kempe, M. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.09.010 · Cited by 64
Monitoring a Silent Phase Transition in CH3NH3PbI3 Solar Cells via Operando X-ray Diffraction
Schelhas, L. T., Christians, J. A., Berry, J. J., Toney, M. F., Tassone, C. J., Luther, J. M., & Stone, K. H. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00441 · Cited by 60
Self-citationLattice dynamics and the nature of structural transitions in organolead halide perovskites
Comin, R., Crawford, M. K., Said, A., Herron, N., Guise, W. E., Wang, X. P., Whitfield, P. S., Jain, A., Gong, X., McGaughey, A. J. H., et al. (2016) · Physical review. B./Physical review. B · doi:10.1103/physrevb.94.094301 · Cited by 59
Antisolvent processing of lead halide perovskite thin films studied by in situ X-ray diffraction
Bruening, K., & Tassone, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06025h · Cited by 49
Soe, C. M. M., Stoumpos, C. C., Harutyunyan, B., Manley, E. F., Chen, L. X., Bedzyk, M. J., Marks, T. J., & Kanatzidis, M. G. (2016) · ChemSusChem · doi:10.1002/cssc.201600879 · Cited by 48
Zhang, H., Zhao, C., Li, D., Guo, H., Liao, F., Cao, W., Niu, X., & Zhao, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10170a · Cited by 45
Influence of Grain Size on Phase Transitions in Halide Perovskite Films
Stavrakas, C., Zelewski, S. J., Frohna, K., Booker, E. P., Gal̷kowski, K., Ji, K., Ruggeri, E., Maćkowski, S., Kudrawiec, R., Płochocka, P., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901883 · Cited by 44
Greco, A., Hinderhofer, A., Dar, M. I., Arora, N., Hagenlocher, J., Chumakov, A. P., Grätzel, M., & Schreiber, F. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b02916 · Cited by 39
Zhang, Y., Thomas, C. J., Guillaussier, A., Smilgies, D., & Korgel, B. A. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b03223 · Cited by 30
Detailed Balance Analysis of Photovoltaic Windows
Wheeler, L. M., & Wheeler, V. M. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01316 · Cited by 30
Rossander, L. H., Larsen‐Olsen, T. T., Dam, H. F., Schmidt, T. M., Corazza, M., Norrman, K., Rajković, I., Andreasen, J. W., & Krebs, F. C. (2016) · CrystEngComm · doi:10.1039/c6ce00382f · Cited by 25
Structure formation and evolution in semiconductor films for perovskite and organic photovoltaics
Pearson, A. J. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.87 · Cited by 22
Shen, K., Hu, J., Liang, Z., Hu, J., Sun, H., Jiang, Z. R., & Song, F. (2018) · Crystals · doi:10.3390/cryst8060232 · Cited by 9
Petrović, M., Rogdakis, K., & Kymakis, E. (2019) · Journal of Physics Energy · doi:10.1088/2515-7655/ab3585 · Cited by 6
Bae, S., Le, Q. V., & Kim, S. (2018) · Ceramist · doi:10.31613/ceramist.2018.21.1.03 · Cited by 6
Research works printed but not linked: 1
- Chen C., 2018, J. Phys. D: Appl. Phys., 51, 6463
Cited by
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Steele, J. A., Solano, E., Hardy, D., Dayton, D., Ladd, D., White, K., Chen, P., Hou, J., Huang, H., Saha, R. A., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300760 · Cited by 230
Byranvand, M. M., Otero‐Martínez, C., Ye, J., Zuo, W., Manna, L., Saliba, M., Hoye, R. L. Z., & Polavarapu, L. (2022) · Advanced Optical Materials · doi:10.1002/adom.202200423 · Cited by 160
Out-of-equilibrium processes in crystallization of organic-inorganic perovskites during spin coating
Pratap, S., Babbe, F., Barchi, N. S., Yuan, Z., Luong, T., Haber, Z., Song, T., Slack, J. L., Stan, C. V., Tamura, N., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25898-5 · Cited by 166
X-ray diffraction of photovoltaic perovskites: Principles and applications
Tan, W. L., & McNeill, C. R. (2022) · Applied Physics Reviews · doi:10.1063/5.0076665 · Cited by 155
Metadata
- Authors
- Mundt, L. E., & Schelhas, L. T.
- Affiliations
- SLAC National Accelerator Laboratory (US)
- Corresponding author
- Schelhas, Laura T.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-11-25
- Volume
- 10
- Issue
- 26
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2990185008
- Semantic Scholar
- 033aeaf93d20b231fea0e02e9c1034a894e4d81e
- Cited by
- 58
- References
- 89
- Citations by year
- 2026: 7 · 2025: 12 · 2024: 8 · 2023: 15 · 2022: 6 · 2021: 9 · 2020: 1
- FWCI
- 1.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Energy Materials (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy
- Solar Energy Technologies Office
- National Renewable Energy Laboratory (DE‐AC36‐08‐GO28308)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic and transport properties of perovskites and related materials
- Keywords
- halide perovskites, perovskite degradation, structural evolution, in situ X-ray diffraction, roll-to-roll processing, thin film stability, device stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.